Petrography of alluvial sands as a past and present environmental indicator: Case of the Loire River (France)

Four sample sets of the Upper and Middle Loire river sands were analyzed in order to study the impact of natural and anthropogenic factors on their petrographic composition in space (on an 800 km stretch) and time. Composition was determined by modal analysis of three sand-size fractions using a polarizing optical microscope and calculated for each sample (“standard sand” = Sst). The watershed is composed mainly of endogenic (Massif Central) and sedimentary (southern Parisian Basin) rocks. B-set sands collected in channels for different water flows in 1996 show that Sst compositions vary by only 5 %. Present-day sands in the Upper Loire and Middle Loire have very high petrographic immaturity comparing to others worldwide fluvial sands, although bio-climatic conditions favor sand maturation by source-rock weathering in the watershed. This shows the strong impact of the Massif Central on sediment yield due to relief rejuvenation as a consequence of the formation of the Alps during the Quaternary. Fluvial sands stored during the Weichselian and the Holocene in the Middle Loire floodplain, although partly weathered since their deposition, show higher inputs from the endogenic rocks of the Massif Central than present-day deposits. This can be explained by Weichselian periglacial conditions and the development of crop farming since the Neolithic, which favored mechanical erosion, particularly in the Massif Central which is characterized by a cold, humid climate and steep slopes. The upstream-downstream change in the composition of presently deposited sand is low in the diked area. It shows however that basalt and some heavy mineral grains are vulnerable to abrasion during transport and indicates a marked sediment yield from ancient sediment stored in the floodplain. This is in line with the high incision of the river bed over the last 150 years partly due to dam construction and aggregate mining.     

Parameter and rating curve uncertainty propagation analysis of the SWAT model for two small Mediterranean catchments

Abstract

The SWAT model was tested to simulate the streamflow of two small Mediterranean catchments (the Vène and the Pallas) in southern France. Model calibration and prediction uncertainty were assessed simultaneously by using three different techniques (SUFI-2, GLUE and ParaSol). Initially, a sensitivity analysis was conducted using the LH-OAT method. Subsequent sensitive parameter calibration and SWAT prediction uncertainty were analysed by considering, firstly, deterministic discharge data (assuming no uncertainty in discharge data) and secondly, uncertainty in discharge data through the development of a methodology that accounts explicitly for error in the rating curve (the stage?discharge relationship). To efficiently compare the different uncertainty methods and the effect of the uncertainty of the rating curve on model prediction uncertainty, common criteria were set for the likelihood function, the threshold value and the number of simulations. The results show that model prediction uncertainty is not only case-study specific, but also depends on the selected uncertainty analysis technique. It was also found that the 95% model prediction uncertainty interval is wider and more successful at encompassing the observations when uncertainty in the discharge data is considered explicitly. The latter source of uncertainty adds additional uncertainty to the total model prediction uncertainty.

Editor D. Koutsoyiannis; Associate editor D. Gerten

Citation Sellami, H., La Jeunesse, I., Benabdallah, S., and Vanclooster, M., 2013. Parameter and rating curve uncertainty propagation analysis of the SWAT model for two small Mediterranean watersheds. Hydrological Sciences Journal, 58 (8), 1635?1657.     

Geochemistry and health aspects of F-rich mountainous streams and groundwaters from sierras Pampeanas de Cordoba,Argentina

Symptoms of dental fluorosis have been observed in rural communities located in the Sierras Pampeanas de Córdoba, a mountainous area in Central Argentina. The clinical assessment was performed in the Charbonier Department, where the fluoride (F⁻) intake was determined to be 3.90 ± 0.20 mg day⁻¹ (n = 16). In this community, mild and severe fluorosis reach an incidence of 86.7% (total teeth surface = 636 teeth) among the children population. To determine the origin and distribution of fluorine in natural waters from the Charbonier Department and nearby regions, sampling was performed in the area covering the San Marcos River basin. The obtained results show that F⁻ concentrations vary between ~1 to ~2.5 mg l⁻¹, with an outlier value of 8 mg l⁻¹. The spatial distribution of F⁻ shows that the lowest concentrations are found at the basin’s catchments. Maximum values are located in two sectors of the basin: the Charbonier depression in the eastern part and at the San Marcos village, downstream the main collector, in the western part of the basin. In these two regions, the F⁻ contents in ground- and surface waters are >2.0 mg l⁻¹ and nearly constant. Dissolved F⁻ in natural waters from the study area has its origin in the weathering of F-bearing minerals present in the region’s dominant lithology. The extent of mineral weathering is mostly determined by the residence time of water within the aquatic reservoir. Longer residence times and a major solid–water interaction lead to enhanced release of F⁻. This explains the higher F⁻ concentrations found in basin areas with lower run off. The removal of F⁻ from water appears to occur by neither fluorite precipitation, nor by adsorption. Hence, variations in F⁻ concentrations seem to be more related to regional hydrological conditions.     

Morphological similarities between DBM and a microeconomic model of sprawl

We present a model that simulates the growth of a metropolitan area on a 2D lattice. The model is dynamic and based on microeconomics. Households show preferences for nearby open spaces and neighbourhood density. They compete on the land market. They travel along a road network to access the CBD. A planner ensures the connectedness and maintenance of the road network. The spatial pattern of houses, green spaces and road network self-organises, emerging from agents individualistic decisions. We perform several simulations and vary residential preferences. Our results show morphologies and transition phases that are similar to Dieletric Breakdown Models (DBM). Such similarities were observed earlier by other authors, but we show here that it can be deducted from the functioning of the land market and thus explicitly connected to urban economic theory.     

Instability structures, synsedimentary faults and turbidites, witnesses of a Liassic seismotectonic activity in the Dauphiné Zone (French Alps): A case example in the Lower Pliensbachian at Saint-Michel-en-Beaumont

Instability structures, synsedimentary faults and turbidites have been studied in the Lower Pliensbachian succession of Saint-Michel-en-Beaumont, belonging to the Taillefer block, an ancient half-graben emplaced during the Liassic Tethyan rifting. Geometrical and mechanical analyses demonstrate that the instability structures occurred thanks to movements along spineless synsedimentary normal faults, when the turbiditic and limestone layers were already case-hardened and partly fractured by tension gashes even when the mudstones were still unlithified. Both the tension gashes and the synsedimentary faults are homogeneous in strike with the major regional faults and are in good agreement with the regional direction of extension for this period. The characters of the turbiditic beds, with erosive base, graded bedding, and incomplete Bouma sequence, are in favour of a seismic origin. Instability structures, spineless synsedimentary faults and turbiditic inflows are thus considered as seismites and interpreted as the result of high seismicity periods including some events with M > 5 in the general extensive ambiance of the Liassic Tethyan rifting. The analysis of the geometrical relationships between all these sedimentary features allows to distinguish the successive stage of occurrence of an instability structure, from the sedimentation of alternating marls and limestones, and sudden turbiditic inflows, then early case-hardening of the turbidites, until the important seismotectonic event generating the spineless normal faults, themselves triggering the fall of indurated blocks and locally the forming of breccias. The Ornon Fault, which constitutes the border of the Taillefer block, 15 km eastward, played a major role during the Liassic sedimentation and may represent the major seismic fault related to the seismites occurrence in the Beaumont basin.     

Incremental growth of normal faults: Insights from a laser-equipped analog experiment

We conducted a laser-equipped analog experiment aimed at quasi-continuously monitoring the growth of a dense population of normal faults in homogeneous conditions. To further understand the way geological faults progressively gain in slip and length as they accumulate more strain, we measured with great precision the incremental slip and length changes that the analog faults sustain as they grow. These measurements show that the analog faults share common features with the natural ones. In particular, during their growth, the faults develop and maintain cumulative slip profiles that are generally triangular and asymmetric. The growth takes place through two distinct phases: an initial, short period of rapid lateral lengthening, followed by a longer phase of slip accumulation with little or no lengthening. The incremental slip is found to be highly variable in both space (along the faults) and time, resulting in variable slip rates. In particular, ‘short- and long-term’ slip rates are markedly different. We also find that slip measurements at local points on fault traces do not contain clear information on the slip increment repeat mode. Finally, while the fault growth process is highly heterogeneous when considered at the scale of a few slip events, it appears homogeneous and self-similar at longer time scales which integrate many slip increments. This is likely to be the result of a feedback between stress heterogeneities and slip development. The long-term scale homogeneity also implies that the long-term faulting process is primarily insensitive to the short-term heterogeneities that are rapidly smoothed or redistributed. We propose a new conceptual scenario of fault growth that integrates the above observations and we suggest that faults grow in a bimodal way as a result of a self-driven and self-sustaining process.     

Improving modelling and inversion in refraction seismics with a first-order Eikonal solver

A first-order Eikonal solver is applied to modelling and inversion in refraction seismics. The method calculates the traveltime of the fastest wave at any point of a regular grid, including head waves as used in refraction. The efficiency, robustness and flexibility of the method give a very powerful modelling tool to find both traveltimes and raypaths. Comparisons with finite-difference data show the validity of the results. Any arbitrarily complex model can be studied, including the exact topography of the surface, thus avoiding static corrections. Later arrivals are also obtained by applying high-slowness masks over the high-velocity zones. Such an efficient modelling tool may be used interactively to invert for the model, but a better method is to apply the refractor-imaging principle of Hagedoorn to obtain the refractors from the picked traveltime curves. The application of this principle has already been tried successfully by previous authors, but they used a less well-adapted Eikonal solver. Some of their traveltimes were not correct in the presence of strong velocity variations, and the refractor-imaging principle was restricted to receiver lines along a plane surface. With the first-order Eikonal solver chosen, any topography of the receiving surface can be considered and there is no restriction on the velocity contrast. Based on synthetic examples, the Hagedoorn principle appears to be robust even in the case of first arrivals associated with waves diving under the refractor. The velocities below the refractor can also be easily estimated, parallel to the imaging process. In this way, the model can be built up successively layer by layer, the refractor-imaging and velocity-mapping processes being performed for each identified refractor at a time. The inverted model could then be used in tomographic inversions because the calculated traveltimes are very close to the observed traveltimes and the raypaths are available.     

DNA-based methods in paleolimnology: new opportunities for investigating long-term dynamics of lacustrine biodiversity

We reconstructed 150 years of ecological change in a shallow boreal lake located on the east shore of the Baltic Sea by integrating different types of environmental evidence: paleolimnological records (XRF-measured elements, fossil pigments and Cladocera assemblages), information from historical limnological surveys and archival maps. We assessed the role of biomanipulation by liming and fish-removal in the disappearance of submerged macrophytes, such as Lobelia dortmanna L., and their replacement by persistent cyanobacterial blooms. The combination of different strands of evidence revealed that the shift from macrophyte to cyanobacterial dominance was part of a long-term ecological response to eutrophication and increased sediment load from catchment disturbances. The findings demonstrate that a gradual loss of wetlands and increase of ditches in a catchment had a more significant effect on the lake ecosystem, compared to the direct, but short-term impact of biomanipulation. The study highlights the importance of catchment land-use and disturbance by ditches in changing the ecology of boreal water bodies. Also, it illustrates that a thorough understanding of the long-term ecosystem dynamics and differentiation among responses to multiple anthropogenic impacts are essential preconditions for addressing the deterioration of habitats and change in aquatic environments.     

Fully Equipped to Succeed: Migratory Contingents Seen as an Intrinsic Potential for Striped Bass to Exploit a Heterogeneous Environment Early in Life

Migratory contingents, groups of individuals belonging to the same population that adopt different migratory patterns, have been identified in numerous Striped Bass (Morone saxatilis) populations along North American East Coast. We tested the hypothesis that migratory contingents may develop early in life to maximize the exploitation of the variety of habitats faced by a recently introduced fish population. Using the discriminatory power provided by otolith chemistry, we studied early-life history stages of Striped Bass in a recently reintroduced population in the St. Lawrence Estuary. Migratory patterns were inferred using multivariate analysis of four otolith trace elements (Sr, Ba, Mn, and Mg) on juveniles (0+ and 1+). Three migratory contingents were identified during early-life history stages: freshwater residents, oligohaline migrants, and mesohaline migrants. This study demonstrates the rapid establishment, in less than 10 years since initial stocking, of three migratory contingents initiated early in life among the St. Lawrence Striped Bass population. We postulate that diversification provided by the establishment of distinct migratory contingents among early-life history stages promotes the rapid colonization of new environments through the exploration and exploitation of an increased number of nursery habitats.