Geostatistical downscaling of fracture surface topography accounting for local roughness

This study proposes a new geostatistical methodology that accounts for roughness characteristics when downscaling fracture surface topography. In the proposed approach, the small-scale fracture surface roughness is described using a “local roughness pattern” that indicates the relative height of a location compared to its surrounding locations, while the large-scale roughness is considered using the surface semivariogram. By accounting for both components–the minimization of the local error variance and the reproduction of the local roughness characteristics–into the objective function of simulated annealing, the fracture surface topography downscaling process was improved compared to standard geostatistical methodologies such as ordinary kriging and sequential Gaussian simulation. Downscaled topography data were then assessed in terms of prediction errors and roughness distribution.     

A fluidized landslide on a natural slope by artificial rainfall

An experiment to induce a fluidized landslide by artificial rainfall was conducted on a natural slope at Mt. Kaba-san in the village of Yamato, Ibaraki Prefecture, Japan. The experimental slope was 30 m long, 5 m wide, and the average slope gradient was 33°. A landslide initiated 24,627.5 s (410 m/27.5 s) after the start of sprinkling at a rainfall intensity of 78 mm/h. The landslide mass was 14 m long and 1.2 m deep (at maximum). It first slid, then fluidized, and changed into a debris flow. The travel distance was up to 50 m in 17s. The apparent friction angle of the fluidized landslide was 16.7°. Formation of the sliding surface was detected by soil-strain probes. Motion of the surface of the failed landslide mass was determined by stereo photogrammetry.     

Geostatistical interpolation of object counts collected from multiple strip transects: Ordinary kriging versus finite domain kriging

Data collected along transects are becoming more common in environmental studies as indirect measurement devices, such as geophysical sensors, that can be attached to mobile platforms become more prevalent. Because exhaustive sampling is not always possible under constraints of time and costs, geostatistical interpolation techniques are used to estimate unknown values at unsampled locations from transect data. It is known that outlying observations can receive significantly greater ordinary kriging weights than centrally located observations when the data are contiguously aligned along a transect within a finite search window. Deutsch (1994) proposed a kriging algorithm, finite domain kriging, that uses a redundancy measure in place of the covariance function in the data-to-data kriging matrix to address the problem of overweighting the outlying observations. This paper compares the performances of two kriging techniques, ordinary kriging (OK) and finite domain kriging (FDK), on examining unexploded ordnance (UXO) densities by comparing prediction errors at unsampled locations. The impact of sampling design on object count prediction is also investigated using data collected from transects and at random locations. The Poisson process is used to model the spatial distribution of UXO for three 5000 × 5000 m fields; one of which does not have any ordnance target (homogeneous field), while the other two sites have an ordnance target in the center of the site (isotropic and anisotropic fields). In general, for a given sampling transects width, the differences between OK and FDK in terms of the mean error and the mean square error are not significant regardless of the sampled area and the choice of the field. When 20% or more of the site is sampled, the estimation of object counts is unbiased on average for all three fields regardless of the choice of the transect width and the choice of the kriging algorithm. However, for non-homogeneous fields (isotropic and anisotropic fields), the mean error fluctuates considerably when a small number of transects are sampled. The difference between the transect sampling and the random sampling in terms of prediction errors becomes almost negligible if more than 20% of the site is sampled. Overall, FDK is no better than OK in terms of the prediction performances when the transect sampling procedure is used.     

Relationship between trace elements and depositional environments in shallow sediments: a case study from Southern Kanto Plain,Central Japan

Underground developments such as subways and shopping facilities have been increasing in number and magnitude in the relatively shallow subsurface of many urban areas where the earth materials commonly are composed of marine sediments. Marine sediments can contain significant amounts of toxic trace elements such as arsenic, boron, and lead. Changes in the subsurface environment caused by excavation and construction in underground developments could potentially cause these toxic elements to be dissolved into pore water of the sediments, which might lead to groundwater pollution. The purpose of this study is to investigate correlations among chemical properties of marine sediments, such as pH and electrical conductivity (EC), concentrations of toxic trace elements, and stratigraphic characteristics of the sediments. We selected three sites with different stratigraphic settings in the southern Kanto Plain around the Tokyo Metropolis. We collected core samples from shallow strata at a site in the Arakawa Lowland, southern Saitama, and at two sites in the Musashino Upland, Middle Tokyo. All sites have both marine and non-marine sediments up to 50–60 m in thickness. We determined trace element concentrations in the pore water, pH, EC, and loss on ignition. The results show that (1) the marine sediments tend to have low pH, high EC, and high sulfur concentration compared to the non-marine sediments (2) the concentration of most of the soluble heavy metals vary depending on the concentration of sulfate, the pH, and the formation processes of the strata, (3) the arsenic concentration is not related to sulfur concentration but apparently to Fe and Al concentrations, (4) the boron concentration is not related to any other properties implying that the boron level is independent of and cannot be predicted by common chemical properties, and (5) for all three sites, concentrations of most of the trace elements, EC, pH, and sulfate concentration were correlated with each other. This study shows that the concentration and potential mobilization of many toxic trace elements in marine sediments could be predicted by easily measurable pore water chemical properties such as pH and EC. This could be useful for predicting and avoiding the risk of groundwater pollution during underground development projects.     

Flushing rate and salinity may control the blooms of the toxic dinoflagellate Alexandrium tamarense in a river/estuary in Osaka Bay, Japan

The first observation of a red tide of the toxic dinoflagellate Alexandrium tamarense in the Yodo River estuary, Osaka Bay, Japan was in the spring of 2007. To clarify which environmental factors controlled the abundance of A. tamarense, field surveys were conducted in 2008 and 2009. In 2008, the increase of A. tamarense occurred from early to mid-March and temperatures ranged from 9 to 13 °C. In contrast, in 2009, the increase was 1 month later, from early to mid-April and therefore temperatures were higher. In both years, A. tamarense was most abundant when salinities were relatively high (15–25), river discharge was low, and the water column was stable. There were no cells during periods of low salinity (<10), high discharge. In 2008, possibly silicate and phosphate were limiting during the simultaneous diatom and A. tamarense bloom in early March with silicate restricting the further growth of diatoms. In this estuarine basin, freshwater discharge from the weir increased the flow rate at stations downstream of the weir and deterred bloom formation by A. tamarense. Conversely, the lack of discharge increased the salinity and stability of the water column and decreased in the flow rate in the river/estuary. This process promoted the initiation of the bloom of A. tamarense and the subsequent accumulation of paralytic shellfish toxin in the brackish water clam Corbicula japonica. It is recommended that a constant discharge from the weir is maintained in order to prevent blooms of A. tamarense and subsequent paralytic shellfish poisoning (PSP) incidents in this area.     

Illite crystallinity study of the Cretaceous Shimanto Belt in the Akaishi Mountains, eastern Southwest Japan

Abstract Illite crystallinity (IC) analyses in the Upper Cretaceous Shimanto accretionary complex of the southern Akaishi Mountains, eastern Southwest Japan confirm the applicability of this technique for evaluating the grade of diagenesis/metamorphism in a sediment-dominated accretionary complex. Reproducibility analyses of IC values show a variance of about 15% from the mean. Data from three traverses, which transect across-strike sections of ∼25 km, clearly demonstrate that the IC distributions have specific overall trends. The IC values belong to the lQwer anchizone and the zone of diagenesis. The IC distributions may be controlled locally by structural features, but there are no distinct relationships with regional-scale geological structures. This may indicate that the heterogeneous geothermal rise affected the pre-existing structural and diagenetic/metamorphic framework of the accretionary sequence. Along-strike variations of grade tend to increase toward the northeast where a Middle Miocene granitoid occurs. Hence, the original diagenetic/metamorphic framework of this part of the Shimanto Belt was presumably overprinted during the Middle Miocene.     

Reliability of ADCP data detided with a numerical model on the East China Sea shelf

The reliability of a numerical tide model for detiding acoustic Doppler current profiler (ADCP) data is examined on the East China Sea shelf. The process is adopted for the ADCP data obtained on 12–13 May 2003. The ocean model accompanied by the most precise harmonic constants available to public is used to compute external tides. The root mean square difference is less than 10 cm/s between the detided currents and those using the least squares method, and so the detiding process using the numerical model is available to detect the East China Sea shelf circulation faster than this speed.     

Recent Occurrences of Dinophysis fortii (Dinophyceae) in the Okkirai Bay, Sanriku, Northern Japan, and Related Environmental Factors

Occurrence of Dinophysis fortii, a causative organism of diarrhetic shellfish poisoning, in the Okkirai Bay, Sanriku was surveyed in 1995, 1996, 1998 and 1999. In each year, its major occurrence was detected from the late May or early June and continued until the late June or early July. Seawater temperature, salinity and nutrients measurements suggested that inflows of offshore water into the bay played key role on the first major occurrence of D. fortii. With an analysis of continuous temperature data in the Otsuchi Bay which locates north of the Okkirai Bay, this influent was considered to be intermittent inflow of the offshore water by internal tidal waves which propagated from north to south. First occurrence peak of D. fortii was synchronous with phycobilin containing microalgae, synechococcoid cyanobacteria and cryptomonad, in all years. In vivo fluorescence measurement of D. fortii cells in 1995 and 96 showed that the cells in these microalgal-rich water contained more phycobilin pigment than those in the microalgal-poor water. The result may support a hypothesis that D. fortii acquires phycobilin by an uptake of these microalgae. After the first major occurrence in the bay, D. fortii sometimes occurred in rather inshore waters where showed elevated ammonium level possibly due to increased heterotrophic activity. Together with another finding that D. fortii is mixotrophic, it could be assumed that the environment being suited to heterotrophic nutrition also stimulates D. fortii growth in the bay.     

Geoarchaeological investigations at the upper Paleolithic site of Kamihoronai‐Moi,Hokkaido, Japan

In order to better understand modern human behavioral variability in Hokkaido, Japan, we consider the geoarchaeology of the Kamihoronai‐Moi site in terms of its geochronology, stratigraphy, depositional environments, and post‐depositional disturbances. A Paleolithic component is stratigraphically situated between the Eniwa‐a (15,000–17,000 ¹⁴C yr B.P.) and the Tarumae‐d (8000–9000 ¹⁴C yr B.P.) tephras. Moreover, six AMS ¹⁴C ages on charcoal from a Pleistocene‐aged hearth feature are between 14,400 and 14,800 ¹⁴C yr B.P. Quantitative examinations of patterns in artifact distributions show a low degree of vertical and horizontal displacement of chipped‐stone artifacts, suggesting that post‐depositional movement of the cultural material was insufficient to disrupt the original pattern of artifact distribution. © 2009 Wiley Periodicals, Inc.     

Diurnal soil water dynamics in the shallow vadose zone (field site of China University of Geosciences,China)

Because of the relatively low soil moisture in arid or semi-arid regions, water vapour movement often predominates in the vadose zone and affects the partitioning of energy among various land surface fluxes. In an outdoor sand bunker experiment, the soil water content at 10 and 30 cm depth were measured at hourly intervals for 2.5 days during October 2004. It was found that the soil moisture reached the daily maximum value (5.9–6.1% at 10 cm and 11.9–13.1% at 30 cm) and minimum value (4.4–4.5% at 10 cm and 10.4–10.8% at 30 cm) at midday (0–1 p.m. for 10 cm and 2–3 p.m. for 30 cm) and before dawn (2–3 a.m. for 10 cm and 4–5 a.m. for 30 cm), respectively. The modified HYDRUS-1D code, which refers to the coupled water, water vapour and heat transport in soil, was used to simulate the moisture and water vapour flow in the soil. The numerical analyses provided insight into the diurnal movement of liquid water and water vapour driven by the gradients of pressure heads and temperatures in the subsurface zone. The simulated temperature and water content were in good agreement with the measured values. The spatial–temporal distribution of liquid water flux, water vapour flux and soil temperature showed a detailed diurnal pattern of soil water dynamics in relatively coarse sand. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.