Preliminary study on PAH degradation by bacteria from contaminated sediments in Xiamen Western Sea,Fujian, China

In order to estimate the biodegradation of three polycyclic aromatic hydrocarbons (PAHs) compounds, bacterial strains were isolated from marine sediments in three heavily contaminated sites (Yuandang Lake, Dongdu Port and Aquacultural zones in Maluan Bay) in Xiamen Western Sea. The results show three bacterial strains, which used pyrene as the sole carbon source, were identified as strains of Aureobacterium sp.,Arthrobacter sp., Rhodococcus sp. The PAH-degrading bacteria isolated had a strong ability to degrade phenanhrene, fluoranthene and pyrene at different degradation rates. The highest degradation rate was observed when three PAH compounds were mixed with an individual strain in the medium. The three PAHs were degraded after one week with a degradation rate of 89.94 % for phenanthrene and 93.4 % for both of fluoranthene and pyrene.In addition, after 25 days of incubation, the degradation rate was 99.98 % for phenanthrene and 99.97 % for both of fluoranthene and pyrene. Optical density was measured to estimate bacterial growth during the degradation of PAHs. Highest levels of bacterial growth were observed with a three PAH mixture in the culture, suggesting that the concentration of PAHs influenced bacterial growth and the highest levels of degradation for most series were detected after one week of incubation.     

Use of microelectrodes for electrochemical measurement of nitric oxide in natural seawater

In this paper, the application of a homemade Nation and Co(Salen) modified platinum microelectrode and an ISO-NOPMC microsensor (World Precision Instruments, USA ) to measure nitric oxide in natural seawater is reported. These two microelectrodes are suitable for the measurement. In natural seawater, the sensitivity and stability of the ISO-NOPMC microsensor are higher than that of the homemade Nation and Co(Salen) modified platinum microelectrode.     

Features of clay minerals in the YSDP102 core on the continental shelf of the southeast Yellow Sea

Ninety-eight clay mineral samples from the YSDP102 core were analyzed by x-ray diffractometer to study the four clay minerals: illite, chlorite, kaolinite and smectite. Twenty-eight samples had been analyzed on the laser particle-siz eanalyzer to reveal the particle features of the sediments. Distribution of the clay minerals and the particle characteristics in the YSDP102 core show that the core experienced three different depositional periods and formed three different sedimentary intervals due to different sediment sources and different depositional environments. Features of the clay minerals and the heavy minerals in the YSDP102 core indicate that coarse-grained sediments and fine-grained sediments result from different sources. The Yellow Sea Warm Current has greatly influenced the sedimentary framework of this region since the current‘s formation.     

Selection of environmental conditions for nearshore structure design

1　Introduction　InChina ,coastalcitiesaremostlyregionaleconomicdevelopmentcenters.Becauseoftheirspecialgeogra phiclocations ,typhoonsandassociatedstormsurgescauseheavylossesoflivesandproperties.In 1 992 Qing daowasfloodedduetothecoincidenceoftheastrono m…     

Experiments on the kinetics of partial melting of a leucogranite at 200 MPa H<Subscript>2</Subscript>O and 690–800°C: compositional variability of melts during the onset of H<Subscript>2</Subscript>O-saturated crustal anatexis

We have experimentally investigated the kinetics of melting of an aplitic leucogranite (quartz+sodic plagioclase of ≈Ab₉₀+K-feldspar+traces of biotite) at 690, 740, and 800°C, all at 200 MPa H₂O. Leucogranite cylinders, 3.5 mm in diameter and 7 mm in length, were run in the presence of excess H₂O using cold-seal pressure vessels for 11–2,925 h. At 690 and 740°C and any experimental time, and 800°C and short run times, silicate glass (melt at run conditions) occurs as interconnected films along most of the mineral boundaries and in fractures, with the predominant volume occurring along quartz/feldspars boundaries and quartz/plagioclase/K-feldspar triple junctions. Glass film thickness is roughly constant throughout a given experimental charge and increases with experimental temperature and run duration. The results indicate that H₂O-saturated partial melting of a quartzo-feldspathic protolith will produce an interconnected melt phase even at very low degrees (<5 vol%) of partial melting. Crystal grain boundaries are therefore completely occluded with melt films even at the lowest degrees of partial melting, resulting in a change in the mechanism of mass transport through the rock from advection of aqueous vapor to diffusion through silicate melt. At 690 and 740°C the compositions of glasses are homogeneous and (at both temperatures) close to, but not on, the H₂O-saturated 200 MPa haplogranite eutectic; glass compositions do not change with run duration. At 800°C glasses are heterogeneous and plot away from the minimum, although their molar ratios ASI (=mol Al₂O₃/CaO+Na₂O+K₂O) and Al/Na are constant throughout the entire charge at any experimental time. Glass compositions within individual 800°C experiments form linear trends in (wt%) normative quartz–albite–orthoclase space. The linear trends are oriented perpendicular to the 200 MPa H₂O haplogranite cotectic line, reflecting nearly constant albite/orthoclase ratio versus variable quartz/feldspar ratio, and have endpoints between the 800°C isotherms on the quartz and feldspar liquidus surfaces. With increasing experimental duration the trends migrate from the potassic side of the minimum toward the bulk rock composition located on the sodic side, due to more rapid (and complete) dissolution of K-feldspar relative to plagioclase. The results indicate that partial melting at or slightly above the solidus (690–740°C) is interface reaction-controlled, and produces disequilibrium melts of near-minimum composition that persist metastably for up to at least 3 months. Relict feldspars show no change in composition or texture, and equilibration between melt and feldspars might take from a few to tens of millions of years. Partial melting at temperatures well above the solidus (800°C) produces heterogeneous, disequilibrium liquids whose compositions are determined by the diffusive transport properties of the melt and local equilibrium with neighboring mineral phases. Feldspars recrystallize and change composition rapidly. Partial melting and equilibration between liquids and feldspars might take from a few to tens of years (H₂O-saturated conditions) at these temperatures well above the solidus.     

Geochemical and O-isotope constraints on the evolution of lithospheric mantle in the Ross Sea rift area (Antarctica)

Peridotite xenoliths found in Cenozoic alkali basalts of northern Victoria Land, Antarctica, vary from fertile spinel-lherzolite to harzburgite. They often contain glass-bearing pockets formed after primary pyroxenes and spinel. Few samples are composite and consist of depleted spinel lherzolite crosscut by amphibole veins and/or lherzolite in contact with poikilitic wehrlite. Peridotite xenoliths are characterized by negative Al₂O₃–Mg# and TiO₂–Mg# covariations of clino- and orthopyroxenes, low to intermediate HREE concentrations in clinopyroxene, negative Cr–Al trend in spinel, suggesting variable degrees of partial melting. Metasomatic overprint is evidenced by trace element enrichment in clinopyroxene and sporadic increase of Ti–Fe_tot. Preferential Nb, Zr, Sr enrichments in clinopyroxene associated with high Ti–Fe_tot contents constrain the metasomatic agent to be an alkaline basic melt. In composite xenoliths, clinopyroxene REE contents increase next to the veins suggesting metasomatic diffusion of incompatible element. Oxygen isotope data indicate disequilibrium conditions among clinopyroxene, olivine and orthopyroxene. The highest δ¹⁸O values are observed in minerals of the amphibole-bearing xenolith. The δ¹⁸O_cpx correlations with clinopyroxene modal abundance and geochemical parameters (e.g. Mg# and Cr#) suggest a possible influence of partial melting on oxygen isotope composition. Thermobarometric estimates define a geotherm of 80°C/GPa for the refractory lithosphere of NVL, in a pressure range between 1 and 2.5 GPa. Clinopyroxene microlites of melt pockets provide P–T data close to the anhydrous peridotite solidus and confirm that they originated from heating and decompression during transport in the host magma. All these geothermometric data constrain the mantle potential temperature to values of 1250–1350°C, consistent with the occurrence of mantle decompressional melting in a transtensive tectonic regime for the Ross Sea region.     

Evaluation of an ensemble of Arctic regional climate models: spatiotemporal fields during the SHEBA year

Simulations of eight different regional climate models (RCMs) have been performed for the period September 1997–September 1998, which coincides with the Surface Heat Budget of the Arctic Ocean (SHEBA) project period. Each of the models employed approximately the same domain covering the western Arctic, the same horizontal resolution of 50 km, and the same boundary forcing. The models differ in their vertical resolution as well as in the treatments of dynamics and physical parameterizations. Both the common features and differences of the simulated spatiotemporal patterns of geopotential, temperature, cloud cover, and long-/shortwave downward radiation between the individual model simulations are investigated. With this work, we quantify the scatter among the models and therefore the magnitude of disagreement and unreliability of current Arctic RCM simulations. Even with the relatively constrained experimental design we notice a considerable scatter among the different RCMs. We found the largest across-model scatter in the 2 m temperature over land, in the surface radiation fluxes, and in the cloud cover which implies a reduced confidence level for these variables. An erratum to this article can be found at     

GPS精密钟差内插方法研究

GPS钟差的计算,可以通过精密星历内插所得。将IGS提供的15min精密星历内插到5min,其中分别用拉格朗日多项式、切比雪夫多项式法来进行内插,根据两种插值多项式分别比较分析在不同阶数情况下内插的精度。详细介绍了拉格朗日多项式、切比雪夫多项式插值法的基本原理,通过算例得出了拉格朗日与切比雪夫的拟合精度都可以满足精密定位需要,且切比雪夫插值的精度更高。     

浅谈3S技术及其在土地管理中的应用现状与发展趋势

土地管理是国家为维护土地制度、调整土地关系、合理组织土地利用所采取的行政、经济、法律和技术的综合措施。土地作为一种不可再生资源,如何科学地利用和有效地管理对可持续发展有比较重要的意义。本文主要概述了土地管理中的土地资源调查、土地利用总体规划、土地资源动态监测、土地评价、土地整理等的应用现状,并结合3S技术的发展探讨了其应用趋势。