The Matuyama-Brunhes reversal at Tecopa basin, southeastern California, revisited again

Numerous records of the Matuyama-Brunhes geomagnetic transition have been obtained from paleomagnetic studies. Because few of the reversal records are of acceptable reliability, however, the exact behavior of the field during the transition has remained enigmatic. To provide confirmation of one of the more reliable records, we have re-examined the transition at two sites, 150 m apart, in lake sediments of Tecopa basin, southeastern California. The two sites are geographically very close to that of Valet et al. [10], who previously obtained a record from that site indicating that the transitional field was non-dipolar and axisymmetric.

The Matuyama-Brunhes reversal is recorded differently at each of our two sites and at that of Valet et al. [10]. Zones of mixed polarities and/or intermediate directions occur at all three sites but they differ greatly in polarity character, thickness and stratigraphic position. It appears that all three sites have provided mutually contradictory records of the transition. It is unlikely, therefore, that any of the records is acceptable for establishing the nature of the transition at this locality.

Obliteration of the transition is apparently the result of acquisition of a stable, normal-polarity overprint that appears to consist of two remanence components, one acquired during post-depositional compaction and dewatering, and one during later sediment diagenesis.     

Heat,momentum and moisture budgets of the katabatic layer over the melting zone of the west Greenland ice sheet in summer

The budgets of momentum, heat and moisture of the atmospheric boundary layer overlying the melting zone of the west Greenland ice sheet during an 8-day period in summer are calculated. To do so, the governing budget equations are derived and presented in terms of vertically averaged quantities. Moreover, stationarity is assumed in the present study. Measurements collected during the GIMEX-91 experiment are used to calculate the contribution of the different terms in the equations to the budget.During summer, a well developed katabatic wind system is present over the melting zone of the Greenland ice sheet. The budgets show that advection in the katabatic layer is small for momentum, heat and humidity, when the horizontal length scale of the integration area is sufficiently large (>50 km). This indicates that in principle one-dimensional atmospheric models can be used to study the boundary layer over the melting zone of the Greenland ice sheet. The background stratification plays a crucial role in the heat and moisture budget. Vertical divergence of longwave radiation provides one-third and the turbulent flux of sensible heat the rest of the cooling of the boundary layer. Moisture is added to the boundary layer by evaporation which is a significant term in the moisture budget. Negative buoyancy (katabatic forcing) dominates the momentum budget in the downslope direction. Coriolis forcing is important, stressing the large spatial scale of the katabatic winds on the Greenland ice sheet.     

K-Ar ages of the metamorphic sole of the Semail Ophiolite: implications for ophiolite cooling history

K–Ar ages have been determined on micas and hornblendes in the basal metamorphic sequence and in metamorphic rocks squeezed into the mantle sequence of the Semail Ophiolite. The hornblende ages of 99±0.5 and 102±0.8 Ma and the 90 Ma ages of coexisting micas from the high-grade metamorphic portion of the sequence are interpreted as cooling stages following the peak of metamorphism (T 800–850° C, P 6.5–9 kbar). The new pressure estimates are based on findings of kyanite in garnet-amphibolite and cordierite in quartzitic rocks. These data indicate a cooling rate of 10–30° C/Ma. The oldest mica ages of 95±1 Ma are observed in the lowest-grade greenschists. These also largely represent cooling ages, but might in part also include formation ages. The pattern of the muscovite ages across the metamorphic sole indicates that the cooling front moved from the low-grade metamorphic zone, through the high-grade rocks and into the base of the overlying ophiolite. Radiometric ages of hornblendes (92.3±0.5 and 94.8±0.6 Ma) indicate that the crustal gabbro sequence cooled below 500° C later than the base of the ophiolite sequence. Metamorphism of the sole rocks occurred during subduction of oceanic sediments and volcanic or gabbroic rocks as they progressively came into contact with hotter zones at the base of the overriding plate. The peak of metamorphism must have been contemporaneous with the main magmatism in the Semail Ophiolite. One of the dated muscovites yields an age of 81.3±0.8 Ma, but this is related to discrete deformation zones that were active during late-stage emplacement of the ophiolite.     

Ein tektonischer Schnitt durch Mittelperu

Zusammenfassung Es wird ein kombinierter Profilschnitt durch Mittelperu zwischen der Küste bei Lima und dem brasilianischen Schild vorgelegt, wobei die wesentlichen, am telefonischen Aufbau Mittelperus beteiligten Felder in Kürze charakterisiert werden. Das Vergenzverhalten im Faltenbau und die jeweilige Ausbildung der Feldergrenzen werden besonders betont.

---

A combined section of Central Peru from the coast near Lima to the Brazilian shield is given with a brief outline of the main structural units, which form part of the tectonic framework of Central Peru. Special emphasis is laid on the overturn of the folding and the characteristics of the zones separating the units from each other.

---

Résumé On vous donne un profil combiné du Pérou Central de son littoral près de Lima jusqu'à la masse cristalline du Brésil avec une brève caractérisation des unités structurales principales qui font partie de la charpente tectonique du Pérou Central. En particulier, on fait ressortir le déversement du plissement et les qualités des zones qui séparent les différentes unités.

---

( . ) .

     

OCO in Earth’s atmosphere

The chemistry and budgets of atmospheric gases are constrained by their bulk stable isotope compositions (e.g., δ¹³C values), which are based on mixing ratios of isotopologues containing one rare isotope (e.g., ¹⁶O¹³C¹⁶O). Atmospheric gases also have isotopologues containing two or more rare isotopes (e.g., ¹⁸O¹³C¹⁶O). These species have unique physical and chemical properties and could help constrain origins of atmospheric gases and expand the scope of stable isotope geochemistry generally. We present the first measurements of the abundance of ¹⁸O¹³C¹⁶O from natural and synthetic sources, discuss the factors influencing its natural distribution and, as an example of its applied use, demonstrate how its abundance constrains the sources of CO₂ in the Los Angeles basin. The concentration of ¹⁸O¹³C¹⁶O in air can be explained as a combination of ca. 1‰ enrichment (relative to the abundance expected if C and O isotopes are randomly distributed among all possible isotopologues) due to enhanced thermodynamic stability of this isotopologue during isotopic exchange with leaf and surface waters, ca. 0.1‰ depletion due to diffusion through leaf stomata, and subtle (ca. 0.05‰) dilution by ¹⁸O¹³C¹⁶O-poor anthropogenic CO₂. Some air samples are slightly (ca. 0.05‰) lower in ¹⁸O¹³C¹⁶O than can be explained by these factors alone. Our results suggest that ¹⁸O¹³C¹⁶O abundances should vary by up to ca. 0.2‰ with latitude and season, and might have measurable sensitivities to stomatal conductances of land plants. We suggest the greatest use of Δ₄₇ measurements will be to “leverage” interpretation of the δ¹⁸O of atmospheric CO₂.     

Flux correction and the simulation of changing climate

A flaw is pointed out in the manner in which flux correction is currently applied to coupled atmosphere-ocean general circulation models. If a transient climate simulation were carried out using perfect initial data and a perfect model, then a perfect simulation would be made. However, if the model were flux corrected so that it is in equilibrium for current conditions, according to current practice, then errors in the simulation would grow initially to a finite amplitude and persist indefinitely. Larger errors would be produced by a simulation with the flux corrected model beginning from pre-industrial conditions than by a simulation beginning from current conditions. An example with a simple linear model is constructed to illustrate this point, and the relationship to the cold start problem is demonstrated. An optimal flux correction for the simple example is shown to be one which would eliminate the error in the current climate from a transient simulation begun sufficiently far in the past.     

Equipment Decontamination Procedures for Ground Water and Vadose Zone Monitoring Programs: Status and Prospects

A major portion of the work effort and, therefore, the money spent during investigations of ground water and the vadose zone at hazardous waste sites is associated with collecting chemical data. To that end, effective decontamination of reusable drilling equipment, sampling apparatus, and tools is critical to the credibility of chemical data. Samples representative of the site under study are essential.
Several state and federal regulatory agencies have established guidelines for procedures that should be considered when developing decontamination protocols. These agencies were contacted and asked to furnish copies of their decontamination guidelines. The information received was reviewed, and comparisons were made to assess the status of standards of decontamination practices for ground water and vadose zone monitoring programs at hazardous waste sites. Summaries of a variety of decontamination protocols were prepared. From this review, it is apparent that there is a need to standardize, to the extent possible, procedures for the field decontamination of equipment.
Two ASTM Subcommittees, D18.14 on Waste Management and D18.21 on Ground Water and Vadose Zone Monitoring, are currently working on developing standards for decontamination procedures. They, in cooperation with state and federal agencies and other interested technical groups, will develop standards for the field decontamination of equipment used to study ground water and the vadose zone.     

The size frequency and abundance of subtidal bloodworms (Glycera dibranchiata,ehlers) in Montsweag Bay,Woolwich-Wiscasset,Maine

A study was conducted in the subtidal portion of Montsweag Bay (Woolwich-Wiscasset, Maine) between the mean low water mark and 1.5 m depth, to determine the size composition, abundance, and monetary value of bloodworms (Glycera dibranchiata). Eight 1-m² subplots were sampled in each of three regions of equal size with the aid of a compressed air lift apparatus. Bloodworms collected varied in length between 1 and 31 cm; the majority were smaller than commercial size (<12 cm). A mean length of 4.6±0.03 cm (95% confidence level) was reported for noncommercial size worms and 19.6±2.0 cm, (95% confidence level) for commercial worms. Although the numbers of bloodworms of all sizes collected in region 1 were significantly greater than the numbers collected from region 3, no significant differences among the numbers of commercial-sized bloodworms were found in subplots within the three regions. Estimates of the standing crop and value of commercial bloodworms present were derived from overall estimates of the numbers m^?2 and the standard error at 95% confidence (1.04±0.58 worms), the subtidal area, and the 1971 and 1983 value of commercial worms. During 1971, the 6,059,040±3,379,080 commercial-sized bloodworms present were valued at $242,362.00±$135,163.00. At 1983 prices, the value of these worms would be from $363,542.00±$202,745.00 to $605,904.00±$337,908.00. Construction of a causeway, which created subtidal conditions where intertidal conditions formerly existed, apparently had no adverse effect upon the bloodworm population present.     

Landslide susceptibility mapping in a hilly terrain using remote sensing and GIS

Remote sensing and Geographic Information System (GIS) are well suited to landslide studies. The aim of this study is to prepare a landslide susceptibility map of a part of Ooty region, Tamil Nadu, India, where landslides are common. The area of the coverage is approximately 10 × 14 km in a hilly region where planting tea, vegetables and cash crops are in practice. Hence, deforestation, formation of new settlements and changing land use practices are always in progress. Land use and land cover maps are prepared from Indian Remote Sensing Satellite (IRS 1C - LISS III) imagery. Digital Elevation Model (DEM) was developed using 20 m interval contours, available in the topographic map. Field studies such as local enquiry, land use verification, landslide location identification were carried out. Analysis was carried out with GIS software by assigning rank and weights for each input data. The output shows the possible landslide areas, which are grouped for preparation of landslide susceptibility maps.