Variable sequence of events during the past seven terminations in two deep-sea cores from the Southern Ocean

The relationships among internally consistent records of summer sea-surface temperature (SSST), winter sea ice (WSI), and diatomaceous stable isotopes were studied across seven terminations over the last 660 ka in sedimentary cores from ODP sites 1093 and 1094. The sequence of events at both sites indicates that SSST and WSI changes led the carbon and nitrogen isotopic changes in three Terminations (TI, TII and TVI) and followed them in the other four Terminations (TIII, TIV, TV and TVII). In both TIII and TIV, the leads and lags between the proxies were related to weak glacial mode, while in TV and TVII they were due to the influence of the mid-Pleistocene transition. We show that the sequence of events is not unique and does not follow the same pattern across terminations, implying that the processes that initiated climate change in the Southern Ocean has varied through time.     

Microstructural records of multiple retrograde local H2O supplement in the pelitic gneiss,Lützow-Holm Complex at Akarui Point,East Antarctica

The alkali-feldspar and biotite in the sillimanite-biotite-garnet gneiss from East Antarctica preserves characteristic microstructural evidence of multi-stage H₂O supplement during the retrograde metamorphism. The first microstructural evidence is the “zoned feldspar,” in which the mesoperthitic zone, the anti-perthitic zone, and lamella-free plagioclase zone coexist within a single crystal. They are occasionally found next to biotite, and are always depleted in orthoclase (Or) component toward the biotite. The formation process of this microstructure could be explained by the diffusion that oversteps the solvus. The second microstructural evidence is the serrate boundary between alkali-feldspar and biotite. The projections of biotite are selectively developed next to Or lamellae of alkali-feldspar every 3–5 μm. These two microstructures would have formed as the biotite grew by consuming potash in alkali-feldspar when H₂O-bearing fluid locally passed through the grain boundaries. The former microstructure was formed at 825–900 °C before lamella formation, and the latter microstructure was formed after the lamella formation. These microstructures are the indicators of fluid pathways formed under two different temperature conditions. The common coexistence of these microstructures implies that the fluid used similar pathways during the retrograde metamorphism.     

Aerodynamic Parameters of Urban Building Arrays with Random Geometries

It is difficult to describe the flow characteristics within and above urban canopies using only geometrical parameters such as plan area index (λ _p ) and frontal area index (λ _f ) because urban surfaces comprise buildings with random layouts, shapes, and heights. Furthermore, two types of ‘randomness’ are associated with the geometry of building arrays: the randomness of element heights (vertical) and that of the rotation angles of each block (horizontal). In this study, wind-tunnel experiments were conducted on seven types of urban building arrays with various roughness packing densities to measure the bulk drag coefficient (C _d ) and mean wind profile; aerodynamic parameters such as roughness length (z _o ) and displacement height (d) were also estimated. The results are compared with previous results from regular arrays having neither ‘vertical’ nor ‘horizontal’ randomness. In vertical random arrays, the plot of C _d and z _o versus λ _f exhibited a monotonic increase, and z _o increased by a factor of almost two for λ _f = 48–70%. C _d was strongly influenced by the standard deviation of the height of blocks (σ) when λ _p ≥ 17%, whereas C _d was independent of σ when λ _p = 7%. In the case of horizontal random arrays, the plot of the estimated C _d against λ _f showed a peak. The effect of both vertical and horizontal randomness of the layout on aerodynamic parameters can be explained by the structure of the vortices around the blocks; the aspect ratio of the block is an appropriate index for the estimation of such features.     

Orthopyroxene–cordierite mafic gneiss from the Nomamisaki metamorphic rocks,Southern Kyushu,Japan: Implication for western continuation of the Usuki–Yatsushiro Tectonic Line

We describe an orthopyroxene–cordierite mafic gneiss from the Nomamisaki metamorphic rocks in the Noma Peninsula, southern Kyushu, Japan. The mineral assemblage of the gneiss is orthopyroxene, cordierite, biotite, plagioclase, and ilmenite. Thermometry based on the Fe–Mg exchange reaction between orthopyroxene and biotite yields a peak metamorphic temperature of 680°C. The stability of cordierite relative to garnet, quartz, and sillimanite defines the upper limit of the peak metamorphic pressure as 4.4 kbar. These features indicate that the Nomamisaki metamorphic rocks underwent low‐pressure high‐temperature type metamorphism. Although a chronological problem still remains, the Nomamisaki metamorphic rocks can be regarded as a western continuation of the Higo Belt. The Usuki–Yatsushiro Tectonic Line, which delineates the southern border of the Higo Belt, is therefore located on the east of the Nomamisaki metamorphic rocks in southern Kyushu.     

Variation in noble gas isotopic composition of gas samples from the Aegean arc, Greece

In contrast to most other arcs with oceanic plate subduction, the Aegean arc is characterized by continent–continent subduction. Noble gas abundances and isotopic compositions of 45 gas samples have been determined from 6 volcanoes along the arc, 2 islands in the back-arc region and 7 sites in the surrounding areas. The ³He/⁴He ratios of the samples ranged from 0.027R_A to 6.2R_A (R_A denotes the atmospheric ³He/⁴He ratio of 1.4×10⁻⁶), demonstrating that even the maximum ³He/⁴He ratio in the region is significantly lower than the maximum ratios of most oceanic subduction systems, which are equal to the MORB value of 8±1 R_A. Regional variations in the ³He/⁴He ratio were observed both along and across the arc. The maximum ³He/⁴He ratio was obtained from Nisyros volcano located in the eastern end of the arc, and the ratio decreased westward possibly reflecting the difference in potential degree of crustal assimilation or the present magmatic activity in each volcano. Across the volcanic arc, the ³He/⁴He ratio decreased with an increasing distance from the arc front, reaching a low ratio of 0.063R_A in Macedonia, which suggested a major contribution of radiogenic helium derived from the continental crust. At Nisyros, a temporal increase in ³He/⁴He ratio due to ascending subsurface magma was observed after the seismic crisis of 1995–1998 and mantle neon was possibly detected. The maximum ³He/⁴He ratio (6.2R_A) in the Aegean region, which is significantly lower than the MORB value, is not probably due to crustal assimilation at shallow depth or addition of slab-derived helium to MORB-like mantle wedge, but inherent characteristics of the subcontinental lithospheric mantle (SCLM) beneath the Aegean arc.     

Specimens size effect D/H on cyclic behaviour and liquefaction potential of clean sand

Acta Geotechnica - Owing to the lack of complementary shear stress on vertical boundaries of a direct simple shear (DSS) specimen, the stress/strain distributions in soil specimens are not uniform....     

Lower crustal seismic velocity-anomalies; magmatic underplating or serpentinized peridotite? Evidence from the Vøring Margin,NE Atlantic

On the Vøring volcanic passive margin offshore mid-Norway, NE Atlantic, a lower crustal body with P-wave velocities in the range of 7.1–7.7 km/s has been mapped by twenty two-dimensional Ocean Bottom Seismograph (OBS) profiles. The main aim of the present paper is to evaluate to what extent the lower crust is consistent with magmatic intrusions or serpentinized peridotite. The relatively low V _p/V _s ratios of 1.75–1.78 modelled for the lower crust under the continental part of the Vøring Plateau are consistent with mafic intrusions mixed with blocks of stretched continental crust, but not with the presence of partially serpentinized peridotites. The lower crustal high-velocity body is restricted to the area of the Late Cretaceous/Early Tertiary rift that lead to continental break-up in Early Eocene. The same model can explain the observations in the northern Vøring Basin, but in the central and southern Vøring Basin the seismic velocities do not preclude a model involving serpentinized peridotite in addition to intrusions and continental remnants. On the west Iberia non-volcanic margin a similar layer is interpreted as serpentinized peridotite. The existence of Moho reflections, the observation of S-wave anisotropy but absence of P-wave anisotropy, uncertainties regarding supply of water to allow for significant serpentinization and very low stretching factors compared with the west Iberia Margin, are among factors that argue against the presence of serpentinized peridotite in the Vøring Basin.     

Modelling the behaviour of accretion flows in X-ray binaries

We review how the recent increase in X-ray and radio data from black hole and neutron star binaries can be merged together with theoretical advances to give a coherent picture of the physics of the accretion flow in strong gravity. Both long term X-ray light curves, X-ray spectra, the rapid X-ray variability and the radio jet behaviour are consistent with a model where a standard outer accretion disc is truncated at low luminosities, being replaced by a hot, inner flow which also acts as the launching site of the jet. Decreasing the disc truncation radius leads to softer spectra, as well as higher frequencies (including quasi periodic oscillations, QPOs) in the power spectra, and a faster jet. The collapse of the hot flow when the disc reaches the last stable orbit triggers the dramatic decrease in radio flux, as well as giving a qualitative (and often quantitative) explanation for the major hard–soft spectral transition seen in black holes. The neutron stars are also consistent with the same models, but with an additional component due to their surface, giving implicit evidence for the event horizon in black holes. We review claims of observational data which conflict with this picture, but show that these can also be consistent with the truncated disc model. We also review suggested alternative models for the accretion flow which do not involve a truncated disc. The most successful of these converge on a similar geometry, where there is a transition at some radius larger than the last stable orbit between a standard disc and an inner, jet dominated region, with the X-ray source associated with a mildly relativistic outflow, beamed away from the disc. However, the observed uniformity of properties between black holes at different inclinations suggests that even weak beaming of the X-ray emission may be constrained by the data. After collapse of the hot inner flow, the spectrum in black hole systems can be dominated by the disc emission. Its behaviour is consistent with the existence of a last stable orbit, and such data can be used to estimate the black hole spin. By contrast, these systems can also show very different spectra at these high luminosities, in which the disc spectrum (and probably structure) is strongly distorted by Comptonization. The structure of the accretion flow becomes increasingly uncertain as the luminosity approaches (and exceeds) the Eddington luminosity, though there is growing evidence that winds may play an important role. We stress that these high Eddington fraction flows are key to understanding many disparate and currently very active fields such as ULX, Narrow Line Seyfert 1’s, and the growth of the first black holes in the Early Universe.