Undrained Monotonic Response and Instability of Medium-Dense Sandy Soil

A series of undrained monotonic triaxial compression tests were performed on natural, medium-dense (relative density (RD) = 50%) Chlef sand containing 0.5% of non-plastic fines, under different confining pressures of 50 kPa, 100 kPa, and 200 kPa. This article focuses on distinctive states of the monotonic undrained response of sands, namely the critical state, the phase transformation state, the quasi-steady state, and the state of undrained instability (onset of flow liquefaction). Specimens were prepared using dry funnel pluviation and wet deposition to investigate the effect of the initial sand fabric on these states. The present data suggest that the initial fabric of the sand appears to have a significant effect on the undrained behavior in the early stages of shearing, with its influence vanishing at large strains. Wet deposition specimens demonstrate considerably larger undrained instability state strength than their dry funnel pluviation counterparts, and a unique critical state locus is reached by both dry funnel pluviation and wet deposition.     

Precision assessment of the orthometric heights determination in northern part of Algeria by combining the GPS data and the local geoid model

The main purpose of this article is to discuss the use of GPS positioning together with a gravimetrically determined geoid, for deriving orthometric heights in the North of Algeria, for which a limited number of GPS stations with known orthometric heights are available, and to check, by the same opportunity, the possibility of substituting the classical spirit levelling. For this work, 247 GPS stations which are homogeneously distributed and collected from the international TYRGEONET project, as well as the local GPS/Levelling surveys, have been used. The GPS/Levelling geoidal heights are obtained by connecting the points to the levelling network while gravimetric geoidal heights were interpolated from the geoid model computed by the Geodetic Laboratory of the National Centre of Spatial Techniques from gravity data supplied by BGI. However, and in order to minimise the discordances, systematic errors and datum inconsistencies between the available height data sets, we have tested two parametric models of corrector surface: a four parameter transformation and a third polynomial model are used to find the adequate functional representation of the correction that should be applied to the gravimetric geoid. The comparisons based on these GPS campaigns prove that a good fit between the geoid model and GPS/levelling data has been reached when the third order polynomial was used as corrector surface and that the orthometric heights can be deducted from GPS observations with an accuracy acceptable for the low order levelling network densification. In addition, the adopted methodology has been also applied for the altimetric auscultation of a storage reservoir situated at 40 km from the town of Oran. The comparison between the computed orthometric heights and observed ones allowed us to affirm that the alternative of levelling by GPS is attractive for this auscultation.     

Groundwater quality of Yemen volcanic terrain and their geological and geochemical controls

One hundred thirty boreholes of volcanic aquifers in rural Yemen Highland Groundwaters (YHGs) were chemically investigated to assess the suitability of water for drinking. Focus is to identify inorganic constituents of significant risk to health that occur in groundwaters of this area. Results showed that a number of boreholes contain, apart from fluoride, levels of nitrate, some heavy metals, total dissolved solids, and sulfates that could pose a health risk for consumers. The lateral variations of major ions with depth varied within the same aquifer based on the dynamic equilibrium of groundwater and hydrogeological conditions. The main inorganic groundwater contaminant in volcanic YHG is fluoride which is attributed to groundwater lithology and water type. Fluoride appears high in Ca-poor groundwater and where cation exchanges of Ca for Na are dominant. High F concentration in YHG is an extension of East African fluoride-rich groundwater. Majority of tube wells show that Fe concentration exceeds WHO guideline many folds. Much of the iron and manganese in groundwaters are naturally occurring, since the source rocks are enriched in ferromagnesian minerals. NO ₃ ^? and Cl^? concentrations that have been detected in some wells may indicate sewage and/or agricultural runoff. Elevated concentration of chemical constituents in groundwater is a sign of groundwater degradation.     

Adsorption of Lead (II) and Zinc (II) from Aqueous Solution by Bituminous coal

Activated carbons have been proven to be effective adsorbents for the removal of Pb (II) and Zn (II) dissolved in aqueous media. The study of adsorption of Pb (II) and Zn (II) on two different size fractions from a composite coal sample of Maghara coal mine, C₆₃ (63–125 μm) and C₂₅₀ (125–250 μm) is presented in this paper. C₆₃ and C₂₅₀ were treated in water solutions of 50 mM lead and zinc acetates. X-ray photoelectron spectroscopy (XPS) was used to characterize the starting and treated coal surfaces. The high surface area and surface functional groups (carboxy and phenolic) enable activated bituminous coal of Maghara to act as efficient adsorbents for removing dissolved Pb (II) and Zn (II) in alkaline medium.     

Propagation of guided waves in a fluid layer bounded by two viscoelastic transversely isotropic solids

The analysis of Stoneley wave propagation in a fracture is essential for the identification and evaluation of fracture parameters from the borehole Stoneley wave. Also, it is important for many geophysics considerations, e.g. for tremor and long-period events observed in volcanoes and geothermal areas. In this paper, we investigate the guided waves propagation in a fluid layer lying between two viscoelastic vertically transversely isotropic media. The viscoelastic mechanism models the attenuation due to the presence of fluid saturation in the rock. A model based on the superposition of three inhomogeneous partial plane waves: one in the fluid and two heterogeneous waves in the solid is developed. The dispersion equation is obtained for this case. A numerical solution is carried out to obtain the guided wave velocity and attenuation coefficient. The results of this investigation show that there is a strong correlation between the velocity dispersion and attenuation of Stoneley wave and the anisotropic parameters of the medium especially in a sandstone (fast) medium.     

Mineral and chemical composition of Karak mudstone, Kohat Plateau, Pakistan: implications for smectite-illitization and provenance

The Karak mudstone interbedded in an Eocene evaporite sequence, is dominated by R-1 ordered illite-smectite with a 20 to 30% expandable component. Minor phases include kaolinite, chlorite, illite/muscovite, plagioclase, potash feldspar, quartz, dolomite and pyrite. The present illite-smectite was probably originally smectite or highly expandable illite-smectite which underwent conversion to illite-smectite with a low expandable component in a comparatively low-temperature (ca. 100°C) closed-system sedimentary basinal diagenetic environment at a depth of ca. 5 km. Al³⁺ and K⁺ necessary for the conversion reaction were provided through the breakdown of potash feldspar. Burial under a 5 km thick pile of sediments produced some of the observed structures. Whole-rock chemistry presented here suggests that the mudstone formed by severe weathering of acidic source rocks. The influx of freshwater probably flushed out Ba, Rb, Ca and Mn from the restricted basin.     

VARIATIONS IN KAMILA AMPHIBOLITES FROM SOUTHEASTERN PART OF THE KOHISTAN ISLAND-ARC TERRANE,PAKISTAN

VARIATIONS IN KAMILA AMPHIBOLITES FROM SOUTHEASTERN PART OF THE KOHISTAN ISLAND-ARC TERRANE,PAKISTAN     

Origin of spheroidal chert nodules, Drunka Formation (Lower Eocene), Egypt

Chert nodules of the Drunka Formation (Lower Eocene) are mostly spherical, have diameters from 40 to 120 cm, are quasi-uniformly spaced 2–3 m apart in the plane of bedding, have concentric internal structure and, except for rare small (<6 cm) solid chert nodules, are less than 85% chertified. Nodules formed after moderate alteration of limestone by meteoric water (δ¹⁸O_calcite = –4 to –8‰) at shallow (<100 m) burial depths; more extensive alteration of limestone (δ¹⁸O = –10 to –16‰) by meteoric water followed nodule growth. Chertification was by low-temperature meteoric water (δ¹⁸O_quartz = +18‰ in margins to +22‰ in nuclei) at shallow burial depths. Meteoric water may have invaded the Drunka Formation in association with shelf progradation during the Early Eocene, or during the development of a Middle Eocene unconformity. Replacement of carbonate mud by microcrystalline quartz was the dominant chertification process, but fossils were replaced in part by fine-grained equant megaquartz, quartzine and chalcedony; the last of these occurs in places as beekite. Opal A-secreting marine organisms are the inferred source of silica, but none are preserved. There is no compelling evidence of an opal-CT precursor, so quartz may have formed by direct precipitation. Self-organization processes of enigmatic character established the spacing pattern of the nodules and also the Liesegang-banded internal structure of the chert nodules. Nodules grew chiefly by diffusive supply of silica, although one locality has elongate nodules that grew when there was some porewater advection. Chertification patterns and δ¹⁸O values of both calcite and quartz indicate that nodule growth was complex and variable. Some nodules probably grew from the centre outwards. Many nodules, however, initially grew simultaneously across the entire nodule, but late-stage growth was predominantly at the outer margins or at selective internal sites.     

Using a naive Bayes classifier to explore the factors driving the harmful dinoflagellate Karenia selliformis blooms in a southeastern Mediterranean lagoon

Ocean Dynamics - The blooms of the toxic dinoflagellate Karenia selliformis can be predicted with accuracy derived from knowledge of the main forcing variables. A naive Bayes classifier modeling...