A siphon mechanism for supplying prominence mass

We examine a siphon-like mechanism for moving mass from the chromosphere to a gravitational well at the top of a magnetic loop to form a prominence. The calculations assume no apriori flow velocity at the loop base. Instead heating in the loop legs drives the flow. The prominence formation process requires two steps. First, the background heating rate must be reduced to on the order of 1 % of the initial heating rate required to maintain the coronal loop. This forms an initial condensation at the top of the loop. Second, the heating must take place only in the loop legs in order to produce a pressure differential which drives mass up into the well at the top of the loop. The heating rate in the loop must be increased once the prominence has begun to form or full prominence densities can not be achieved in a reasonable time. We conclude that this heating driven siphon-like mechanism is feasible for producing and maintaining prominences.     

Asteroid families: evidence of ageing of the proper elements

In recent times it has been emphasized that the present kinematical structures of asteroid families should be evolved with respect to the original post-impact situations, according to numerical simulations performed taking into account also the previously neglected Yarkovsky effect. In this paper we show that also a “classical” approach based on an analysis of the current kinematical properties of families leads to conclude that the distributions of proper eccentricities and semimajor axes of family members exhibit evidence of an evolution. The importance of this approach is that it yields a fully independent and quantitative estimate of an evolutionary spreading of the proper elements. In particular, we find that the original post-impact families had to be on the average about twice more compact than the families we observe now, when considering family members down to about 5 km in size. This result can be used in future analyses to derive estimates of the ages of different families, and to better constrain the typical values of the ejection velocities of the fragments in family-forming events.     

Spatial measurements of stream baseflow,a relevant method for aquifer characterization and permeability evaluation. Application to a hard‐rock aquifer,the Oman ophiolite

The structure, functioning and hydrodynamic properties of aquifers can be determined from an analysis of the spatial variability of baseflow in the streams with which they are associated. Such analyses are based on simple low‐cost measurements. Through interpreting the hydrological profiles (Q = f(A)) it is possible to locate the aquifer(s) linked to the stream network and to determine the type of interrelated flow, i.e. whether the stream drains or feeds the aquifer. Using an analytical solution developed for situations with a positive linear relationship, i.e. where the baseflow increases linearly with increasing catchment size, it is also possible to estimate the permeability of the aquifer(s) concerned at catchment scale. Applied to the hard‐rock aquifers of the Oman ophiolite, this method shows that the ‘gabbro’ aquifer is more permeable than the ‘peridotite’ aquifer. As a consequence the streams drain the peridotites and ‘leak’ into the gabbro. The hydrological profiles within the peridotite are linear and positive, and indicate homogeneity in the hydrodynamic properties of these formations at the kilometre scale. The permeability of the peridotite is estimated at 5 · 10^?7 to 5 · 10^?8 m/s. Copyright © 2004 John Wiley & Sons, Ltd.     

Entry dynamics and acoustics/infrasonic/seismic analysis for the Neuschwanstein meteorite fall

Abstract— We have analyzed several types of data associated with the well‐documented fall of the Neuschwanstein meteorites on April 6, 2002 (a total of three meteorites have been recovered). This includes ground‐based photographic and radiometer data as well as infrasound and seismic data from this very significant bolide event (Spurný et al. 2002, 2003). We have also used these data to model the entry of Neuschwanstein, including the expected dynamics, energetics, panchromatic luminosity, and associated fragmentation effects. In addition, we have calculated the differential efficiency of acoustical waves for Neuschwanstein and used these values to compare against the efficiency calculated using available ground‐based infrasound data. This new numerical technique has allowed the source height to be determined independent of ray tracing solutions. We have also carried out theoretical ray tracing for a moving point source (not strictly a cylindrical line emission) and for an infinite speed line source. In addition, we have determined the ray turning heights as a function of the source height for both initially upward and downward propagating rays, independent of the explicit ray tracing (detailed propagation path) programs. These results all agree on the origins of the acoustic emission and explicit source heights for Neuschwanstein for the strongest infrasonic signals. Calculated source energies using more than four different independent approaches agree that Neuschwanstein was certainly <500 kg in initial mass, given the initial velocity of 20.95 km/s, resulting in an initial source energy ≤0.0157‐0.0276 kt TNT equivalent (4.185 times 10¹² J). Local source energies at the calculated infrasonic/seismic source altitudes are up to two orders of magnitude smaller than this initial source energy.     

Numerical Modeling of the Largest Terrestrial Meteorite Craters

Multi-ring impact basins have been found on the surfaces of almost all planetary bodies in the Solar system with solid crusts. The details of their formation mechanism are still unclear. We present results of our numerical modeling of the formation of the largest known terrestrial impact craters. The geological and geophysical data on these structures accumulated over many decades are used to place constraints on the parameters of available numerical models with a dual purpose: (i) to choose parameters in available mechanical models for the crustal response of planetary bodies to a large impact and (ii) to use numerical modeling to refine the possible range of original diameters and the morphology of partially eroded terrestrial craters. We present numerical modeling results for the Vredefort, Sudbury, Chicxulub, and Popigai impact craters and compare these results with available geological and geophysical information.     

Accretion and evolution in close binaries

The discovery of X-ray binary systems in the 1960's opened up stellar evolution theory by revealing further endpoints in addition to white dwarfs. This review summarises recent progress in studies of stellar-evolutionary processes that lead to X-ray binaries themselves, the mass transfer rates that power them, and the accretion processes which convert this into electromagnetic radiation. Particular attention is paid to the topics of mass transfer fluctuations and of the accretion by magnetic compact stars.     

On the expansions of intermediate orbit for general planetary theory

Intermediate orbit for general planetary theory is constructed in the form of multivariate Fourier series with numerical coefficients. The structure and efficiency of the derived series are illustrated by giving various statistical properties of the coefficients.The ability of the recently proposed elliptic function approach to compress the Fourier series representing the intermediate orbit is investigated. Our results confirm that when mutual perturbations of a pair of planets are considered the elliptic function approach is quite efficient and allows one to compress the series substantially. However, when perturbations of three or more planets are under study the elliptic function approach does not give any advantages.     

Non‐equilibrium concepts lead to a unified explanation of the formation of chondrules and chondrites

Abstract— Calculations of the formation of seven types of chondrules in Semarkona from a gas of solar composition were performed with the FACT computer program to predict the chemistries of oxides (including silicates), developed by the authors and their colleagues. The constrained equilibrium theory was used in the calculations with two nucleation constraints suggested by nucleation theory. The first constraint was the blocking of Fe and other metal gaseous atoms from condensing to form solids or liquids because of very high surface free energies and high surface tensions of the solid and liquid metals, respectively. The second constraint was the blocking of the condensation of solids and the formation of metastable liquid oxides (including silicates) well below their liquidus temperatures. Our laboratory experiments suggested subcooling of type IIA chondrule compositions of 400 degrees or more below the liquidus temperature. The blocking of iron leads to a supersaturation of Fe atoms, so that the partial pressure of Fe (p_Fe) is larger than the partial pressure at equilibrium (p_Fe(eq)). The supersaturation ratio S = p_Fe/p_Fe(eq) becomes larger than 1 and increases rapidly with a decrease in temperature. This drives the reaction Fe + H₂O ? H₂ + FeO to the right. With S = 100, the activity of FeO in the liquid droplet is 100 times as large as the value at equilibrium. The FeO activities are a function of temperature and provide relative average temperatures of the crystallization of chondrules. Our calculations for the LL3.0 chondrite Semarkona and our study of some non‐equilibrium effects lead to accurate representations of the compositions of chondrules of types IA, IAB, IB, IIA, IIAB, IIB, and CC. Our concepts readily explain both the variety of FeO concentrations in the different chondrule types and the entire process of chondrule formation. Our theory is unified and could possibly explain the formation of chondrules in all chondritic meteorites as well as provide a simple explanation for the complex chemistries of chondrites, and especially for type 3 chondrites.     

2060 Chiron back to a minimum of brightness

The results of photometric observations of comet/asteroid 2060 Chiron at the Observatório do Pico dos Dias (Brazil-OPD) and the Observatoire de Haute-Provence (France-OHP) during 1994 and 1995 are presented. The analysis of the data shows a decrease of 2060 Chiron brightness from its peak values of 1988–1991. The absolute magnitude, H_v, varies from a maximum of 6.6 in February 1994 up to a minimum of 6.8 in June 1995. Therefore 2060 Chiron is back to a minimum of activity close to that of 1983–1985. The slope parameter G is found to be G = 0.71 ± 0.15. It is suggested that the H-G magnitude system, generally adopted to present 2060 Chiron brightness, is not the most appropriate due to the cometary activity of this object.     

measurement of noise power spectrum in photon counting PMT's and the effect of the observed (1/f) noise on astronomical photometry

In astronomical photometry, the sensitivity of observations is limited by the dark counts of the photomultiplier tube. In the present work, the effect of dark count noise in photon counting systems is investigated by theory and experimental measurements. Dark counts are considered to be originating from two sources, namely: dc fluctuations and random pulses.Experimental measurements were carried out to determine noise effects in different operating regions of noise dominance. The results provide strong evidence that: in normal operating mode, where the effect of random pulses is dominant, dark counts do not follow Poisson statistics. The observed noise shows strong (1/f) power spectrum, where the observed noise power is found to increase with time of observation.The results are important in photon counting systems operating under dark count limited mode. The conclusions drawn can be useful in obtaining more accurate error estimates and in assessing astronomical photometric observations and data reduction techniques.