安徽省休宁县清坑钼钨多金属矿床地质特征及成因探讨

休宁县清坑钼钨多金属矿床,位于江南地块中的江南古隆起带内部的白际岭岛弧带,五里亭—长陔NEE向构造岩浆带南侧。矿区绢云母石英片岩,总体走向北东,倾向南东,NE向断裂规模较大,具逆冲和斜向逆冲特点。成矿母岩为晚侏罗纪世黑云母二长花岗岩,同熔型。燕山时期,江南陆内造山带形成于壳―幔相互作用等深部过程,随着祁门深大断裂伸展、冲断等转变,岩石圈减薄发生减压熔融,基性岩浆底侵在壳幔边界并使下地壳局部熔融产生中酸性岩浆。岩浆演化分异,钼在岩浆热液中富集,最终演化为含矿热液。随着应力转变,矿质析出,沉淀成矿。     

滇东北毛坪铅锌矿床的成矿时代:闪锌矿Rb-Sr定年

毛坪铅锌矿床是滇东北地区代表性矿床之一,目前尚缺乏精确的成矿年代学数据。该文对选自块状铅锌矿石的4件闪锌矿单矿物样品进行了Rb-Sr同位素定年,获得等时线年龄为321.7±5.8 Ma(MSWD=1.5),表明毛坪铅锌矿床的主成矿作用发生于石炭纪。此外,闪锌矿~(87)Sr/~(86)Sr初始值为0.712166±0.000017,低于大陆地壳~(87)Sr/~(86)Sr平均值(0.719)且高于地幔Sr初始值(0.707),暗示成矿物质主要来源于大陆地壳并混有少量地幔物质。综合前人研究成果,作者认为毛坪铅锌矿属后生矿床,与晚二叠世峨眉山大火成岩省玄武岩浆活动无成因联系,类似于典型的MVT矿床,且滇东北地区可能发育多期铅锌矿化作用。     

基于FLUENT的内孤立波质量源造波方法

为研究内孤立波质量源数值造波方法,本文采用两个点源形式的质量源,分别放置于两层流体的上下层中作为内孤立波激发源。推导源项表达式,从不可压缩流体的Navier-Stokes方程出发,结合内孤立波Kd V、e Kd V理论,基于商业软件FLUENT发展了一种内孤立波质量源数值造波方法。通过数值模拟,分析了质量源造波过程中内孤立波的生成过程,并将数值模拟结果同理论及实验作对比。结果表明:基于此方法生成的内孤立波波形、波高及波致水平速度与理论及实验吻合度较好,该方法是可行的,并且耗时短、效率高。     

填海项目竣工海域使用验收测量的技术方法及若干问题探讨

填海项目竣工海域使用验收测量已经是填海海域从海域转为陆地,向国土部门申请换发土地证前的一个规定程序,是落实海域法的重要保证,在国家海域和土地管理体系中具有重要的地位。自2002年《中华人民共和国海域使用管理法》颁布实施以来,国家海洋局颁发一系列配套法规文件及多部技术规范文件,建立起较为齐全的海域使用管理法规和技术体系,但仍存在管理办法不完善、技术规范缺乏、验收标准模糊等问题,文章就验收测量工作中的施测手段、界线判定方法以及面积量算中遇到的若干问题进行探讨,以期为国家海域使用管理提供参考。     

Production and Certification of Synthetic Selenium Isotopic Reference Materials

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.     

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.     

南海北部潮汕坳陷侏罗系沉积特征及对储层的控制作用研究

南海北部潮汕坳陷侏罗系具有很大的油气勘探潜力,沉积特征对其储层的发育具有明显的控制作用。通过对研究区最新地震资料精细解释,可以划分出4个典型地震反射界面和3个地震反射层,根据层序界面圈出侏罗系分布特征和残留厚度;通过地震相-沉积相转换对比分析研究,识别出侏罗纪地层不同时期的沉积相类型及其分布特征,重塑了潮汕坳陷侏罗系沉积演化史。该区主要发育5类沉积相、8种沉积亚相,其中滨岸三角洲前缘亚相和深水扇中亚相分别控制了碎屑流砂岩优质储层的发育;此外,浊流砂岩储层主要受控于物源供给的影响,距离三角洲砂体朵叶越近,滑塌浊积体数量越多,面积也越大。总体上,滨岸三角洲前缘亚相、深水扇中亚相和滑塌浊积体是研究区良好的储集相带,该类储集体由于埋藏较深加之被泥岩覆盖,对油气聚集较为有利。     

中国航磁大地构造单元划分

本文以我国截止到2011年基本覆盖陆域及部分海域的航磁数据编制的全国航磁系列图为基础,以航磁反映的区域磁场和磁性基底起伏特征为依据,汲取主流大地构造观的划分理念,以板块构造理论及大陆动力学思想为指导,以磁场反映的构造特征为切入点,结合重力、遥感、地质资料对中国陆域构造单元进行划分。大地构造单元划分4个级别:一级构造单元为陆块区和造山系,共划分出8个;二级构造单元为陆块、弧盆系和地块,共划分出32个;三级构造单元为盆地、坳陷带(区)和隆起带(区),共划分出85个;四级构造单元为隆起和坳陷,共划分出332个。本划分方案旨在为油气地质构造背景研究及油气勘探提供一份地球物理资料。文中重点讨论了一、二级构造单元界线厘定的磁场依据及与前人划分存在的不同之处,而三、四级构造单元完全依据磁场及磁性基底起伏情况进行划分,并在盆地和坳陷区给出了深度信息,这为油气勘探者提供了必要的技术支撑。同时,借助丰富的航磁信息提示出一些地质构造方面难解现象,供同行专家参考与讨论。