少量地面控制点的遥感图像精纠正与定位技术探讨

本文主要讨论了利用空间投影一空间斜墨卡托（SOM）投影进行卫星遥感图像精纠正与定位，解决缺少控制点地区卫星遥感图像精纠正与定位问题，并根据正反算公式讨论了卫星遥感图像纠正的空间投影数学基础。     

北京夏季城市热岛现状及楔形绿地规划对缓解城市热岛的作用

通过遥感技术与地面测定相结合的方法，对北京城市热岛现状作观测研究，得到北京城市地面的温度分布特点。使用北京大学城市边界层模式从气象观点就“楔形绿地”规划对北京城市气候的影响进行研究和评价，模式通过对城市地表复杂性和多样性的特征进行细致描述，建立了一个细致模拟城市特点的城市边界层能量平衡模式，并用此能量平衡模式得到的地面温度作为下边界条件，中尺度气象模式MM5做初始场和侧边界条件，建立一个最小分辨率为500 m的城市边界层模式系统，来研究城市边界层在中尺度背景场作用下的精细结构。通过个例模拟，模式能够较准确地模拟城市边界层的风温场分布情况，可以用来对楔形绿地规划进行模拟试验。通过对规划后的气象场在特定的气象条件下进行模拟，结果显示，建造大型的楔形绿地后，绿地区域及绿地周围约1 km以内的地区温度有所降低，降低的程度由规划前后的地表类型改变的剧烈程度、风速大小及与绿地的距离决定，但是这种规划方案却会因城市的下风方向的风速减小而导致通风不畅。     

气象资料三维化技术中的插值问题

通过对不同源气象资料及数字地理信息资料的插值，实现了不同气象资料与地理信息资料分辨率的协调；从而将多种信息叠加到一起，实现了多源资料的二维、三维仿真显示。这对于模拟真实的大气空间结构、理解地形及植被对大气运动的影响、辨识各种天气系统及多种信息的融合等有积极意义。     

赣北中元古界双桥山群低变质强变形行为与格林威尔期造山作用

广泛分布于赣北地区的中元古界双桥山群，以低级区域变质作用、强烈构造变形、具陆内造山带构造变形特征；其成果系在华夏古陆与扬子古陆的碰撞拼接过程中，其应力向陆内传递的结果；时间大致在1100－800Ma，与全球格林威尔期造山作用相当。     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.     

河南南召水洞岭铜铅锌矿床地质特征及成因分析

通过地质详查和综合研究相结合的手段 ,从水洞岭铜铅锌矿床的地质特征入手 ,分析矿床成因 ,提出矿床属海相火山喷发沉积 -弱改造型的成因观点     

大别山东部花岗岩类的稀土元素地球化学及其地质意义

在研究大别山东部主要花岗岩体的稀土元素地球化学特征、稀土元素配分型式的基础上 ,探讨了花岗岩体的物质来源、成岩模式及其构造意义。研究表明 :(1)大别山东部出露的主要花岗岩类岩体的物质来源基本相同 ,且源区具有古岛弧的特征 ;(2 )各岩体的成岩模式呈现以分离结晶作用为主的特征 ;(3)花岗质岩浆上侵的构造环境与中国东部燕山期构造转折的大背景有关。伸展拉张过程造成的地幔上涌不但是花岗岩类形成的构造条件 ,也对超高压变质岩的快速折返有重要影响。     

河北矾山燕山期侵入岩地球化学特征及成因

河北矾山地区燕山期侵入岩可分为早、晚两期。早期（中侏罗世-晚侏罗世）侵入岩主要由二长闪长岩、石英二长闪长岩、石英二长岩、正长岩构成，以高钾钙碱性岩系列岩石为主；SiO2=53.58%-60.57%,Al2O3=16.16%-17.23%,Na2O K2O=5.76%-8.96%,K2O=2.25%-4.55%,Na2O/K2O=1.14-1.56;ACNK=0.72-0.86,NKA=0.47-0.77;Eu^*/Eu=0.80-0.95,轻稀土富集，重稀土和Nb、Ta、Hf、Ti亏损，相对低Zr、Rb和Rb/Sr，但高Sr和Sr/Y，具有埃达史质岩石质岩石的部分特征。晚期（白垩纪）侵入岩由碱长石英正长岩、石英正长岩、石英二长岩、碱工花岗岩、钾长花岗岩构成，以钾玄岩系列岩石为主；比早期岩石富SiO2，低Al2O3、富Na2O K2O和K2O，但低Na2O/K2O;ACNK=0.82-1.07,NKA=0.77-0.92;Eu^*/Eu=0.65-1.00，轻稀土富集，重稀土和Nb、Ta、Hf、Ti亏损，相对高Zr、Rb和Rb/Sr，但低Sr和Sr/Y。矾山地区早期侵入岩的形成可能与伊泽奈崎（Izanaqi)板块向欧亚大陆板块的俯冲所导致的挤压增厚有关；晚期侵入岩可能形成于拉张环境中。     

西藏蛇绿岩中二种合金矿物新变种

在西藏雅鲁藏布江蛇绿岩带的东部，距拉萨200km的泽当罗莎蛇绿岩的铬铁矿中，发现有种类繁多的合金矿物，铬铁镍矿和依铁镍矿就是其中二种。铬铁镍矿分子式：Ni0.41Fe0.35Cr0.24，为等轴晶系，空间群为Fm3m，晶胞参数a=0.35622(2)nm。铱铁镍矿分子式：Ni0.66Fe0.18Ir0.16，属等轴晶系，空间群Oh^5-Fm3m，晶胞参数a=0.46486(4)mm。     

Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.