南海西部浮游有孔虫记录的MIS 3期表层海洋环境变化

对南海西部越南岸外上升流区17954-2站浮游有孔虫属种组合变化、浮游有孔虫氧同位素、AMS14C测年的分析以及浮游有孔虫表层海水温度、温跃层转换函数的研究结果表明:在MIS3期,南海西部表层海水温度大体呈现暖-冷-暖的变化趋势;温跃层深度由浅到深阶段性变化;短时间尺度上温度与温跃层发生幅度较大的快速变化。暖事件（IS）对应于浮游有孔虫暖水种、混合层属种含量的增加,冷水种、温跃层属种含量的减少以及冬夏SST的升高;冷事件则与之相反。表层海水生产力亦大致呈现3个阶段（61～51ka,51～42ka和42～32ka）的变化,在千年尺度的快速气候事件中,暖事件对应浮游有孔虫生产力属种含量降低,冷事件对应升高。此外,在MIS3内部分暖事件（IS6和IS11～13）表现出表层海水温度降低,温跃层深度变浅和表层海水生产力升高的状况,表明该区此时上升流的存在,其形成原因推测是由于东亚夏季风加强的结果。     

汶川地震山地灾害遥感快速提取及其分布特点分析

针对泥石流滑坡灾害体特有的物质组成与活动特点,通过比较分析其在不同遥感影像的光谱特征差异,选择ETM+影像作为主要数据源,提取湿度指数与绿度指数,利用ETM+的穗帽变换、影像差值增强、密度分割和掩膜技术建立了泥石流滑坡山地灾害快速提取模型,并用于汶川地震.通过灾害体的提取,分析了本次地震山地次生灾害的分布规律,利用空间叠加进行了成因的分析.本次地震山地灾害具有如下特点:(1)沿主要地表破裂带分布;(2)山地灾害主要出现在8度-9度地震烈度区,随着烈度的降低,山地灾害的总面积也相应的减少;(3)山地灾害主要发生在海拔高度1000-2500m的地带;(4)主要发生在坡度20°-50°之间的边坡上;(5)地震及余震期间以崩塌滑坡滚石为主,后期以泥石流滑坡为主;(6)具有河流左右两岸呈不对称分布等特点.结果表明,利用ETM+影像建立基于湿度指数与绿度指数的快速提取模型,对于大规模泥石流滑坡提取效果较好,进行大区域山地灾害的遥感快速提取是可行的.     

冰川流域径流估算方法探索——以科其喀尔巴西冰川为例

利用科其喀尔巴西冰川2005年6月至2006年5月水文、气象资料,并结合15 m融合TM、1∶50000地形图、FY-2C数值产品和NCEP/NCAR再分析资料等,构建了10个简单、具有一定自主创新意义的分布式冰川融水径流模型(空间分辨率60 m),较好地模拟了研究冰川流域的日平均流量.结果表明,利用FY-2C总云量资料并结合辐射传输参数化方案能够较好地估算流域太阳入射短波辐射;单独利用总辐射有直接估算大型冰川流域某段时期融水径流的可能.气温与冰川末端流量呈指数关系,度日因子模型更适合于消融季节;提出的基于单元格气温和海拔的简单消融模型有望改进度日因子模型.在气温指数模型中加入太阳辐射调整系数,能够更好地估算冰川融水径流.简化分布式能量平衡模型能够反映大型冰川融水径流的变化;单层汇流方案在一定程度上能够概化托木尔型冰川的汇流过程.     

大庆长垣外围特低渗透扶杨油层CO_2非混相驱油试验研究

大庆长垣外围有3×108t特低渗透的扶杨油层储量在注水开发条件下难以有效动用,为提高这部分储量的有效动用率,开展了CO2非混相驱油试验研究。PVT测试结果表明,扶杨油层原油较稠,体积系数小,膨胀性和收缩性小,溶解系数较低;CO2驱油细管实验最小混相压力为29 MPa,比原始地层压力高8.6 MPa,现场试验为非混相驱;长岩心实验CO2驱油采收率比注水高4~6个百分点。综合室内可行性评价实验结果看,大庆长垣外围扶杨油层开展CO2驱油试验是可行的,并于2003年初在宋芳屯油田南部开辟了注气试验区,有注气井1口,采出井5口。矿场试验结果表明,CO2驱油能够使特低渗透、裂缝不发育的扶杨油层建立起有效驱动体系,从根本上改善其开发效果,该技术有望成为特低渗透扶杨油层有效动用的可行技术。     

新疆北山晚古生代内生金属矿床成矿系列研究

新疆北山造山带是我国重要的铜镍金铁矿产勘查区之一.通过初步研究,按照成矿系列的学术思想,将区内晚古生代金属矿床划分为3个成矿系列,即晚古生代与基性-超基性岩浆有关的铜镍硫化物矿床成矿系列、晚古生代与强应变构造带有关的铜金矿床成矿系列和与火山岩有关的铁矿床成矿系列.     

应用电性特征研究银川平原地下水水质空间分布规律

以蕴涵丰富地下水系统水循环信息的电性特征为线索,采用电测深法,在分析研究银川平原450 m深度内地下水系统的空间结构的基础上,对平原地下水水质空间分布规律进行了综合研究,为银川平原地下水资源可持续利用战略的制订提供了依据。     

Geochemistry and environmental effect of cadmium in the super-large Jinding Pb-Zn deposit,Yunnan Province,China

The Jinding Pb-Zn deposit in Yunnan Province is the representative of a Cd-enriched area and mining activities lead to the release of Cd into the hypergenic ecosystem, resulting in Cd pollution. The concentrations of Cd vary greatly from one type to another type of rocks in the mining district. In the host rock, Cd concentrations range from 50×10^-6 to 650×10^-6 with an average of 310×10^-6. In primary ores, Cd concentrations range from 14×10^-6 to 2800×10^-6 with an average of 767×10^-6. However, in oxidized ores, Cd concentrations are highest, varying within the range of 110×10^-6 to 8200×10^-6 , averaging 1661×10^-6. It is shown that the oxidized ores are the main carder and environmental source of Cd. Leaching test showed that Pb/Zn ores are easy to oxidize and thereafter release Cd and other harmful elements. These leached elements in the leachate may be precipitated rapidly in the order of Zn〉Pb〉Cd. As for the concentration distribution of Cd in the Bijiang River, it is estimated to be 15.7 μg/L Cd in water, 49.3 mg/L in suspended substances, and 203.7 mg/L in sediments. The average value of Cd in soil from the polluted area is 83.0 mg/kg. Natural weathering of Cd-rich rocks and minerals imposes a potential environmental risk on the aquatic ecosystem of the Bijiang catchment.     

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.     

Late Cenozoic Stratigraphy and Paleomagnetic Chronology of the Zanda Basin, Tibet, and Records of the Uplift of the Qinghai-Tibet Plateau

The characteristics of Late Cenozoic tectonic uplift of the southern margin of the Qinghai- Tibet Plateau may be inferred from fluvio-lacustrine strata in the Zanda basin, Ngari, Tibet. Magnetostratigraphic study shows that the very thick fluvio-lacustrine strata in the basin are 5.89- 0.78 Ma old and that their deposition persisted for 5.11 Ma, i.e. starting at the end of the Miocene and ending at the end of the early Pleistocene, with the Quaternary glacial stage starting in the area no later than 1.58 Ma. Analysis of the sedimentary environment indicates that the Zanda basin on the southern Qinghai-Tibet Plateau began uplift at -5.89 Ma, later than the northern Qinghai-Tibet Plateau. Presence of gravel beds in the Guge and Qangze Formations reflects that strong uplift took place at -5.15 and -2.71 Ma, with the uplift peaking at -2.71 Ma.     

ArcGIS与AutoCAD结合在1：50000数据库更新工程中的应用

由于GIS软件平台与CAD软件平台各自具有的优势不一样,如何把ArcGIS和AutoCAD相结合,利用各自优势,快速有效地进行地形图数据库内业编辑、数据分析;本文重点讨论了GIS和CAD数据交换的问题。