嵌入式TCP/IP协议在接收机杜瓦性能参数监测系统中的应用

介绍了射电天文望远镜接收机杜瓦温度与真空度监测系统的设计,具体讨论了监测系统的硬件结构与嵌入式TCP/IP协议在该系统中的实现.针对目前大量使用8位微控制器的嵌入式系统,硬件主控系统芯片采用ATMEL公司生产的8位单片机ATmega16,网络控制芯片采用美国MICROCHIP公司生产的带SPI接口的独立以太网微控制器ENC28J60,设计实现了低成本、高效率、高稳定性的性能参数监测系统.对该系统进行测试分析、数据比对,测试结果表明该系统能够高效与PC机进行通信,PC机所接收到的温度值与标准数据的误差在±0.3 K范围内,接收到的真空值绝对误差在±10 ubar范围内,能够达到系统设计要求.     

多相滤波器组谱分析方法的性能讨论与天文观测应用

多相滤波器组(PFB)是均匀数字滤波器组的一种高效实现结构,用于信号的均匀子带分解和抽取,对应用多相滤波器组作为功率谱估计器的统计性能与计算量进行分析,与相关图与周期图方法进行比较,并通过仿真及FAST密云模型21cm中性氢谱线观测检验其应用效果。     

基于CEI的飞船交会对接远程导引段的轨道确定方案

探讨了CEI技术在飞船交会对接远程导引段的高精度定轨与实时监控的能力。仿真结果表明:精密定轨中采用可视弧段较长的单站可使相对位置精度达百米以内,速度达厘米/秒级。采用单一绝对扩展卡尔曼滤波器的方案进行实时轨道计算,采用滤波稳定后固定模糊度的方法可以使相对轨道位置精度达十米级,速度精度达厘米/秒级,事后及实时的轨道精度均满足远程导引段的精度指标。     

海洋产脲酶细菌的筛选及诱导形成碳酸钙矿物的特征

产脲酶细菌普遍存在于自然界,其对碳酸钙的矿化作用被广泛用于工程地质和环境等各项工程领域;本研究旨在从北戴河新河河口海洋沉积物中分离产脲酶细菌,探讨其诱导形成碳酸钙的特征,为地质与工程领域的应用提供良好的材料.从海洋沉积物样品中共分离出33株细菌,经筛选,其中有10株细菌具有产脲酶活性,16S rRNA基因序列分析表明:...     

Titanium Isotope Analysis of Igneous Reference Materials using a Double-spike MC-ICP-MS Method

Ti separation was achieved by ion-exchange chromatography using Bio-Rad AG 1-X8 anion-exchange and DGA resins. For high-Fe/Ti and high-Mg/Ti igneous samples, a three-column procedure was required, whereas a two-column procedure was used for low-Fe/Ti and low-Mg/Ti igneous samples. The Ti isotopes were analysed by MC-ICP-MS, and instrumental mass bias was corrected using a 47Ti-49Ti double-spike technique. The 47Ti-49Ti double-spike and SRM 3162a were calibrated using SRM 979-Cr, certificated value 53Cr/52Crtrue = 0.11339. Isobaric interference was evaluated by analysing Alfa-Ti doped with Na, Mg, Ca, and Mo, and results indicate that high concentrations of Na and Mg have no significant effect on Ti isotope analyses; however, Ca and Mo interferences lead to erroneous δ49/47Ti values when Ca/Ti and Mo/Ti ratios exceed 0.01 and 0.1, respectively. Titanium isotopic compositions were determined for 12 igneous reference materials, BCR-2, BHVO-2, GBW07105, AGV-1, AGV-2, W-2, GBW07123, GBW07126, GBW07127, GBW07101, JP-1, and DTS-2b. Samples yield δ49/47Ti (‰) of ?0.035 ± 0.022, ?0.038 ± 0.031, 0.031 ± 0.022, 0.059 ± 0.038, 0.044 ± 0.037, 0.000 ± 0.015, 0.154 ± 0.044, ?0.044 ± 0.018, 0.010 ± 0.022, 0.064 ± 0.043, 0.169 ± 0.034, and ?0.047 ± 0.025 (relative to OL-Ti, ±2SD), respectively; of which isotopic compositions of DTS-2b, JP-1, GBW07101, GBW07105, GBW07123, GBW07126, and GBW07127 are reported for the first time. Standard Alfa-Ti was analysed repeatedly over a ten-month period, indicating a reproducibility of ±0.047 (2SD) for δ49/47Ti, similar to the precisions obtained for geochemical reference materials.     

升级改造后的BPL时频监控系统

为更好地完成授时任务,对BPL长波授时系统(由中国科学院国家授时中心承建)进行了升级改造。介绍了升级改造后的BPL长波授时系统组成、时频控制与监测方法。改造前、后系统时频控制指标的统计结果表明,改造后时号控制精度大幅提高。     

A possible explanation for the electron/positron excess of ATIC/PAMELA

Results from PAMELA and ATIC indicate that the Kaluza-Klein type dark matter particles could be the annihilation source of the observed excess of electrons and positrons.Assuming the existence of a nearby black hole with 10000–100000 solar masses and a point source boost algorithm,we apply the standard propagation model and find that the results fit the data well.     

水脉泽寄主活动星系核的吸积率(英文)

水超脉泽辐射( 各向同性光度超过 10 个太阳光度) 通常在星系中心最内部的核区( 小于几个秒差距) 被发现,因而活动星系核被认为是其唯一的能量源。同其它没有检测到水脉泽辐射的活动星系核相比,水脉泽寄主活动星系核可能隐含着某种或某些特殊性质。基于此我们调研了已经公开发表的所有水脉泽源的 X 射线观测情况,得到了一个有 X 射线观测研究结果的子样本( 39 个源) 。由它们的 X 射线光度以及估算的黑洞质量,导出了它们的无量纲吸积率( logL2-10keV /LEdd,其中 L2-10keV和 LEdd分别是 2 - 10keV 的固有光度和爱丁顿光度) ; 与距离范围相当的、没有检测到水脉泽的活动星系核样本相比,发现脉泽寄主活动星系核有较高的吸积率。进一步分析比较这两个活动星系核样本的质量吸积率,也发现类似的趋势。此外,为了探索吸积率和水脉泽辐射间可能的内在联系,我们对它们的脉泽光度和吸积率进行了统计分析,然而结果显示二者之间没有明显的相关性。     

Solar Intranetwork Magnetic Elements: Evolution and Lifetime

Based on Hinode SOT/NFI observations with greatly improved spatial and temporal resolution and polarization sensitivity, the lifestory of the intranetwork (IN) magnetic elements are explored in a solar quiet region. A total of 2282 IN elements are followed from their appearance to disappearance and their fluxes measured. By tracing individual IN elements their lifetimes are obtained, which fall in the range from 1 to 20 min. The average lifetime is 2.9±2.0 min. The observed lifetime distribution is well represented by an exponential function. Therefore, the e-fold characteristic lifetime is determined by a least-square fitting to the observations, which is 2.1±0.3 min. The lifetime of IN elements is correlated closely with their flux. The evolution of IN elements is described according to the forms of their birth and disappearance. Based on the lifetime and flux obtained from the new observations, it is estimated that the IN elements have the capacity of heating the corona with a power of 2.1×10²⁸ erg s⁻¹ for the whole Sun.     

草鱼出血病病毒VP7蛋白基因的人工合成与原核表达

根据GenBank已发表的GCRVVP7蛋白基因序列,设计合成2条特异性引物和19条搭桥引物,通过搭桥PCR人工合成带有3处变异碱基的GCRVVP7蛋白基因整个编码框,经过酶切、连接、PCR鉴定和测序鉴定克隆到原核表达载体pColdTF中,并转化大肠杆菌BL21(DE3),进行IPTG诱导表达和表达产物的SDS-PAGE、Western-blotting分析、纯化以及反应原性的iELISA检测。结果表明,成功人工合成了长831bp的GCRV VP7蛋白基因编码框和构建了VP7蛋白基因的重组质粒pCold TF-VP7,pColdTF-VP7转化菌经IPTG(1mmol/L)诱导3—4h即可获得特异性蛋白VP7重组蛋白的高效表达,VP7重组蛋白相对分子量大小约为73.9ku,与预期大小相符,且与鼠抗GCRV血清有良好反应原性。