Isochron‐burial dating of glaciofluvial deposits: First results from the Swiss Alps

In this study, we use isochron‐burial dating to date the Swiss Deckenschotter, the oldest Quaternary deposits of the northern Alpine Foreland. Concentrations of cosmogenic ¹⁰Be and ²⁶Al in individual clasts from a single stratigraphic horizon can be used to calculate an isochron‐burial age based on an assumed initial ratio and the measured ²⁶Al/¹⁰Be ratio. We suggest that, owing to deep and repeated glacial erosion, the initial isochron ratio of glacial landscapes at the time of burial varies between 6.75 and 8.4. Analysis of 22 clasts of different lithology, shape, and size from one 0.5 m thick gravel bed at Siglistorf (Canton Aargau) indicates low nuclide concentrations: <20 000 ¹⁰Be atoms/g and <150 000 ²⁶Al atoms/g. Using an ²⁶Al/¹⁰Be ratio of 7.6 (arithmetical mean of 6.75 and 8.4), we calculate a mean isochron‐burial age of 1.5 ± 0.2 Ma. This age points to an average bedrock incision rate between 0.13 and 0.17 mm/a. Age data from the Irchel, Stadlerberg, and Siglistorf sites show that the Higher Swiss Deckenschotter was deposited between 2.5 and 1.3 Ma. Our results indicate that isochron‐burial dating can be successfully applied to glaciofluvial sediments despite very low cosmogenic nuclide concentrations. Copyright © 2017 John Wiley & Sons, Ltd.     

Plagioclase zoning as an indicator of magma processes at Bezymianny Volcano,Kamchatka

Back-scattered electron (BSE)-derived zoning patterns of plagioclase phenocrysts are used to identify magma processes at Bezymianny Volcano, Kamchatka, based on the 2000–2007 sequence of eruptive products. The erupted magmas are two-pyroxene andesites, which last equilibrated at ~915°C temperature, 77–87 MPa pressure, and a water content of ~1.4 wt%. Textural and compositional zoning of individual plagioclase phenocrysts typically includes a repeated core-to-rim sequence of oscillatory zoning (An_50–60) truncated by a dissolution surface followed by an abrupt increase in An content (up to An₈₅), which then gradually decreases rimward. This zoning pattern is interpreted to be the result of frequent replenishments of the magma chamber which cause both thermal and chemical interaction between resident and recharge magmas. The outermost 70- to 150-μm-wide zoning patterns of plagioclase phenocrysts are composed of dissolution surface with a subsequent increase in An and Fe contents. Zoning patterns of the rims exhibit correlation among plagioclase phenocrysts within one eruption. Rims are interpreted as a result of crystallization of a batch of magma in the conduit after recharge event.     

Progress in NTHMP Hazard Assessment

The Hazard Assessment component of the U.S. National Tsunami Hazard Mitigation Program has completed 22 modeling efforts covering 113 coastal communities with an estimated population of 1.2 million residents that are at risk. Twenty-three evacuation maps have also been completed. Important improvements in organizational structure have been made with the addition of two State geotechnical agency representatives to Steering Group membership, and progress has been made on other improvements suggested by program reviewers.     

Report on the 4th International Meeting of the IUGS Lower Cretaceous Ammonite Working Group, the “Kilian Group” (Dijon, France, 30th August 2010)

The 4th Kilian Group meeting (Dijon, France, 30th August 2010) focused on the Aptian and Albian Stages. For the Aptian, a two-fold division of the stage was adopted for the Mediterranean area with a boundary between the Dufrenoyia furcata and Epicheloniceras martini Zones. The main changes to the zonal scheme concern the Lower Aptian with: the introduction of a Deshayesites luppovi Subzone in the upper part of the Deshayesites oglanlensis Zone; the replacement of Deshayesites weissi by Deshayesites forbesi as new index-species of the second interval zone; the introduction of a Roloboceras hambrovi Subzone in the upper part of the D. forbesi Zone; and the subdivision of the D. furcata Zone into the D. furcata and Dufrenoyia dufrenoyi Subzones. For the Albian, the upper part of the Douvilleiceras mammillatum Zone (Lower Albian) is now characterized by a Lyelliceras pseudolyelli Subzone. The main amendments concern the Upper Albian. The base of this substage is defined by the base of the Dipoloceras cristatum Zone. Above it, the Upper Albian zonal scheme comprises in stratigraphic order the Mortoniceras pricei, Mortoniceras inflatum, Mortoniceras fallax, Mortoniceras rostratum, Mortoniceras perinflatum and Arrhaphoceras briacensis Zones.     

Radio Pulsars – What is to be Done

In this review I discuss briefly the main theoretical problems concerning radio pulsars and formulate the observations aimed at a verification of the current models of pulsar magnetosphere and the radio emission mechanism. This revised version was published online in July 2006 with corrections to the Cover Date.     

Modeling of the 2011 Japan Tsunami: Lessons for Near-Field Forecast

During the devastating 11 March 2011 Japanese tsunami, data from two tsunami detectors were used to determine the tsunami source within 1.5 h of earthquake origin time. For the first time, multiple near-field tsunami measurements of the 2011 Japanese tsunami were used to demonstrate the accuracy of the National Oceanic and Atmospheric Administration (NOAA) real-time flooding forecast system in the far field. To test the accuracy of the same forecast system in the near field, a total of 11 numerical models with grids telescoped to 2 arcsec (~60 m) were developed to hindcast the propagation and coastal inundation of the 2011 Japanese tsunami along the entire east coastline of Japan. Using the NOAA tsunami source computed in near real-time, the model results of tsunami propagation are validated with tsunami time series measured at different water depths offshore and near shore along Japan’s coastline. The computed tsunami runup height and spatial distribution are highly consistent with post-tsunami survey data collected along the Japanese coastline. The computed inundation penetration also agrees well with survey data, giving a modeling accuracy of 85.5 % for the inundation areas along 800 km of coastline between Ibaraki Prefecture (north of Kashima) and Aomori Prefecture (south of Rokkasho). The inundation model results highlighted the variability of tsunami impact in response to different offshore bathymetry and flooded terrain. Comparison of tsunami sources inferred from different indirect methods shows the crucial importance of deep-ocean tsunami measurements for real-time tsunami forecasts. The agreement between model results and observations along Japan’s coastline demonstrate the ability and potential of NOAA’s methodology for real-time near-field tsunami flooding forecasts. An accurate tsunami flooding forecast within 30 min may now be possible using the NOAA forecast methodology with carefully placed tsunameters and large-scale high-resolution inundation models with powerful computing capabilities.     

A waveguide-based flexible CO2-laser heating system for diamond-anvil cell applications

Fiber-based laser heating systems offer high flexibility and are increasingly used in high-pressure/high-temperature research. Previous fiber-based laser heating systems were based on lasers delivering radiation with 1-μm wavelength that show unfavorable heating characteristics for many sample materials. We report on the development and first experiments of a waveguide (fiber)-based CO₂-laser heating system that can be used in a flexible manner for high-temperature research and for high-pressure/temperature experiments when combined with diamond-anvil cells. The waveguide-based CO₂-laser heating system allows convenient heating of optically transparent samples without the need for adding an additional laser absorber. In a pilot experiment, the flexible heating system has been installed on a Brillouin scattering system to measure high-temperature sound-wave velocities in single-crystal MgO. The waveguide-based CO₂-laser heating system offers perspectives for a variety of scientific applications, most importantly those that require the use of synchrotron facilities where space is limited and flexible solutions are required.     

The first major incision of the Swiss Deckenschotter landscape

The Swiss Deckenschotter (“cover gravels”) is the oldest Quaternary units in the northern Swiss Alpine Foreland. They are a succession of glaciofluvial gravel layers intercalated with glacial and/or overbank deposits. This lithostratigraphic sequence is called Deckenschotter because it “covers” Molasse or Mesozoic bedrock and forms mesa-type hill-tops. Deckenschotter occurs both within and beyond the extent of the Last Glacial Maximum glaciers. The Swiss Deckenschotter consist of two sub-units: Höhere (Higher) and Tiefere (Lower) Deckenschotter. Although the Höhere Deckenschotter sub-unit (HDS) is topographically higher than the Tiefere Deckenschotter, it is older. The only available age for the Swiss Deckenschotter is 2.5–1.8 Ma based on mammal remains found in HDS at the Irchel site. In this study, we present an exposure age for the topographically lowest HDS, calculated from a cosmogenic ¹⁰Be depth-profile. Our results show that the first phase of the Deckenschotter glaciations in the Swiss Alps terminated at least 1,020\(_{ - 120}^{ + 80}\) ka ago, which is indicated by a significant fluvial incision. This line of evidence seems to be close to synchronous with the beginning of the Mid-Pleistocene Revolution, when the frequency of the glacial-interglacial cyclicity changed from 41 to 100 ka and the amplitude from low to high, between marine isotope stages 23 and 22.     

Extraction of tsunami source coefficients via inversion of DART \circledR^{\circledR} buoy data

The ability to accurately forecast potential hazards posed to coastal communities by tsunamis generated seismically in both the near and far field requires knowledge of so-called source coefficients, from which the strength of a tsunami can be deduced. Seismic information alone can be used to set the source coefficients, but the values so derived reflect the dynamics of movement at or below the seabed and hence might not accurately describe how this motion is manifested in the overlaying water column. We describe here a method for refining source coefficient estimates based on seismic information by making use of data from Deep-ocean Assessment and Reporting of Tsunamis (DART ^\circledR^{\circledR}) buoys (tsunameters). The method involves using these data to adjust precomputed models via an inversion algorithm so that residuals between the adjusted models and the DART ^\circledR^{\circledR} data are as small as possible in a least squares sense. The inversion algorithm is statistically based and hence has the ability to assess uncertainty in the estimated source coefficients. We describe this inversion algorithm in detail and apply it to the November 2006 Kuril Islands event as a case study.     

Field Survey of the March 28, 2005 Nias-Simeulue Earthquake and Tsunami

On the evening of March 28, 2005 at 11:09?p.m. local time (16:09 UTC), a large earthquake occurred offshore of West Sumatra, Indonesia. With a moment magnitude (M _w) of 8.6, the event caused substantial shaking damage and land level changes between Simeulue Island in the north and the Batu Islands in the south. The earthquake also generated a tsunami, which was observed throughout the source region as well as on distant tide gauges. While the tsunami was not as extreme as the tsunami of December 26th, 2004, it did cause significant flooding and damage at some locations. The spatial and temporal proximity of the two events led to a unique set of observational data from the earthquake and tsunami as well as insights relevant to tsunami hazard planning and education efforts.