Development of a 3D GIS and its application to karst areas

There is a growing interest in modeling and analyzing karst phenomena in three dimensions. This paper integrates geology, groundwater hydrology, geographic information system (GIS), database management system (DBMS), visualization and data mining to study karst features in Huaibei, China. The 3D geo-objects retrieved from the karst area are analyzed and mapped into different abstract levels. The spatial relationships among the objects are constructed by a dual-linker. The shapes of the 3D objects and the topological models with attributes are stored and maintained in the DBMS. Spatial analysis was then used to integrate the data in the DBMS and the 3D model to form a virtual reality (VR) to provide analytical functions such as distribution analysis, correlation query, and probability assessment. The research successfully implements 3D modeling and analyses in the karst area, and meanwhile provides an efficient tool for government policy-makers to set out restrictions on water resource development in the area.     

Modeling of water–rock interactions in an aquitard of sandy clay in the coastal area near Beihai,China

Unconsolidated sand, gravel and clay deposits near Beihai and in the Leizhou Peninsula in southern China form an unconfined aquifer, aquitard and a confined aquifer. Water and soil samples were collected from the two aquifers in the coastal Beihai area for the determination of chemical compositions, minerals and soluble ions. Hydrogeochemical modeling of three flow paths through the aquitard are carried out using PHREEQC to determine water–rock interactions along the flow paths. The results indicate that the dissolution of anorthite, fluorite, halite, rhodochrosite and CO₂, and precipitation of potash feldspar and kaolinite may be occurring when groundwater leaks through the aquitard from the unconfined aquifer to the confined aquifer. Cation exchanges between Na and Ca can also happen along the flow paths.     

渤海湾盆地新生界生油岩系底界面温度分布

依据渤海湾盆地2000余口测温井的地温梯度数据、地层岩性描述、分层数据以及钻井资料,计算了该盆地各生油岩系底界面的温度。统计结果表明:渤海湾盆地沙河街组大部分凹陷区地层底界面温度介于90℃至150℃,目前仍具有大量生油的温度条件,而在隆起或一些凸起地区,该地层组段温度普遍小于90℃,未能达到生油的温度指标。东营组和孔店组地层也仍具有一定的生油温度条件。研究还表明:地层温度与地层界面埋深密切相关,温度随界面埋深的增大而升高,沉积厚度大的凹陷区地层界面温度大于沉积厚度小的凸起区或斜坡地带,说明地层界面埋深是决定地温高低的主要控制因素,而地温梯度对地层界面温度的影响相对较小。     

冻融循环对塑料土工格栅拉伸性能的影响

在-25～ 25 ℃环境温度条件下, 采用水中冻融和空气中冻融两种方式, 经过50次冻融循环后, 在15 ℃、 0 ℃、 -10 ℃、 -20 ℃和-35 ℃工况下对土工格栅试样进行了拉伸性能的试验研究, 获得了聚乙烯塑料土工格栅的极限承载力、最大延伸率、 不同延伸率对应的应力值等数据. 试验结果表明, 聚乙烯塑料土工格栅在低温时抗拉性能明显提高, 从 15 ℃降至-35 ℃时, 5%延伸率对应的抗拉强度提高107%, 极限承载力提高19%. 同时, 聚乙烯塑料土工格栅极限延伸率随温度降低呈线形关系降低, 从 15 ℃降至-35 ℃时, 极限延伸率降低80%.     

杞麓湖泄水暗河淤塞的不良环境效应分析

杞麓湖岩溶盆地为一封闭的汇水径流型断陷湖盆,汇水面积内的地表地下水流入杞麓湖后,从岳家营落水洞灌入式补给高寨暗河系统,通过地下暗河岩溶管道径流至东部的华宁盆地后以暗河形式排泄。由于泥砂堵塞暗河岩溶管道,导致落水洞最大泄流量不断减小,削弱了杞麓湖的水资源调节功能,引发洪涝灾害;淤塞物及径流迟缓引起污染、污染水置换缓慢又加剧了暗河污染;为解决淹蓄矛盾修建的调蓄水隧道施工以来,岩溶渗漏使得隧道沿线地下水位下降,疏干了山区农村水源,导致地面沉降变形,间接引出一系列新的环境地质问题。     

浙江省长兴县煤山剖面二叠—三叠系过渡地层中的黑碳记录及其地质意义

首次报道了浙江煤山二叠-三叠系界线地层中黑碳的含量及其碳同住素的变化特征。黑碳含量在26层存在一个明显的峰值,含量高达0．51％。黑碳与总有机碳比值从25层底部开始持续升高,在26层达到最高,稳定在0．40以上。黑碳的碳同位素在24层和25层之间有一个陡然的降低,降低幅度达2‰,在25和26层中则存在一个幅度达3‰的缓慢降低,总降低幅度达5‰。黑碳是动植物和化石燃料燃烧的天然记录,浙江煤山二叠-三叠系界线附近黑碳特征反映了二叠纪末期陆地生态系统发生了突然的衰退,发生了强烈的天然大火。根据事件层大火燃烧的长期性或频繁的特征,以及黑碳同位素大幅度陡然降低和缓慢降低,认为燃烧源除了陆地植被外,还有其他富含轻碳的化石燃料,即大火的燃烧源除了植被外,还可能有煤和甲烷水合物等。浙江煤山剖面的黑碳记录,反映了二叠-三叠纪之交地球陆地环境的剧烈变化,有助于理解和揭示生物大灭绝的过程和原因。     

一株从栉孔扇贝病贝体内分离到的分类地位待定的特殊微生物

从典型患病栉孔扇贝(Chlamys farreri)体内分离到一株特殊微生物，光镜下可见的粒子为革兰氏染色阴性；电镜观察为圆形、近似圆形，已经发现的粒子大部分直径在300nm以下，最小为50nm左右，最大可达4000nm以上。该细菌在人工培养基上形不成肉眼可见的菌落，倒置显微镜下其菌落为无色透明、圆形、小点状菌落。生化特性测试表明该细菌能利用吐温-40与吐温-80。其分类地位尚待进一步分析和证实。     

Tetraploid induced by physical and chemical methods in Jinjiang oyster(Crassostrea rivularis)

ＴｅｔｒａｐｌｏｉｄｉｎｄｕｃｅｄｂｙｐｈｙｓｉｃａｌａｎｄｃｈｅｍｉｃａｌｍｅｔｈｏｄｓｉｎＪｉｎｊｉａｎｇｏｙｓｔｅｒ（Ｃｒａｓｓｏｓｔｒｅａｒｉｖｕｌａｒｉｓ）￥ＲｏｎｇＳｈｏｕｂａｉ，ＳｈｉＳｈｕｍｅｉ，ＭｃＱｉｒｏｎｇ，ＬｉｕＳｈａｅｑｉｏ...     

A New Probability of Detection Model for Updating Crack Distribution of Offshore Structures

1 .IntroductionNondestructiveinspection (NDI)isveryimportantforensuringthereliabilityofoffshorestructuresintheirservicelives (Lauraetal.,1 996 ) .Itiswellknownthatdetectionofflawsinvolvesconsider ablestatisticaluncertainties.Asaresult,theprobabilityofdetection (POD)forallflawsofagivensizehasbeenusedintheliteraturetodefinethecapabilityofaparticularNDItechniqueinagivenen vironment.SincethedataofPODusuallyscatterlargely ,itisdifficulttodeterminewhichmodelfitstheavailabledatabest.Thismodelun…     

水下运载器外挂负载的系统测试方案及仿真

研究水下运载器外挂负载的测试问题,根据负载功能,建立了负载的系统模型。考虑到系统可测性,模型中增设一些辅助元件和电路,测试计算机通过与负载的自动驾驶计算机通讯,由自动驾驶计算机施加激励和采集响应,完成测试。最后,对测试方案进行了仿真试验,并分析了仿真结果。