长江口崇明东滩及相邻区域地形演化与驱动因素分析

河口大型滩涂演化关系到航运通畅、生态保护以及近岸工程的安全性，是地貌学和工程界关注的热点。利用单波束测深系统对长江口崇明东滩进行高精度监测，并结合近年来周围环境因素分析其冲淤格局。结果表明:(1) 2011?2017年间崇明东滩和北港北沙基本以淤积为主，北港北汊河槽中央局部形成?2 m心滩，?5 m等深线包络面积基本稳定，整体呈“长高不长大”的格局；(2)海洋来沙是其淤积的主要物源，汊道涨落潮时空分异而形成的两大环流是塑造此地形的主要原因；崇明东滩和北港北沙的淤积直接挤压北港北汊的发展，沙体淤积可能会引起未来两大沙体的并靠；(3)崇明东滩、北支南沿的滩涂整治工程是促进北支萎缩和崇明东滩淤积的重要因素，另外横沙通道落潮分流增加,青草沙围水工程改变了北港河槽的曲率，也有利于北港北沙的淤积。     

Wave-Current Forces on Small Square Cylinders (Part I)

-Based on the extended Morison Equation and model tests, the in-line forces on small square cylinders caused by waves (regular and irregular) and currents are analyzed in detail in this paper. The hydrodynamic coefficient CD and Cu related to KC number and the effect of direction of wave incidence are also given, which can be used in engineering practice.     

Research on Characteristics of Density Current Under the Action of Waves

In this paper,the characteristics of density current under the action of waves are describedwith the help of flume experiment and theoretical analysis.The study shows that turbid water under the ac-tion of the waves can present three types of motion,i.e.significant stratification,fragile stratification andstrong mixing.The motion of turbid water presents significant stratification when(H/D)/△ρ/ρ~(1/2)≤4.5,generally this state is known as density current.The formulas of motionvelocity,thickness,and discharge of density current moving on horizontal bottom are derived by use of ba-sic equations such as momemtum equation,equation of energy conservation and continuity equation offluid.The time-average velocity and the thickness of density current under the action of waves have a rela-tionship with such parameters as relative density(△ρ/ρ),wave height(H),and water depth(D).Whenthese parameters are determined,the time-average thickness and motion velocity of density current are al-so determined.The relat     

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.     

东海东北部春季若干重要水文结构的分析

本文主要基于韩国海洋研究所在东海沿岸海洋过程试验中收集的ＣＴＤ资料，分析了１９９５年春季出现在东海东北部的一些重要水文结构。结果表明，一种锋涡状结构出现在黑潮向东转折点附近。它不仅使邻近海域的水文结构变得更复杂，而且诱发黑潮水与陆架水间活跃的交换。在陆架坡折处观测到若干孤立的陆架水块，可能是锋涡的卷挟作用所致；该海域存在４个水团，即黑潮水、对马暖流水、陆架水和混合水。对马暖流水分为上下两层：上层水为变性黑潮水，盐度比黑潮水约低０．１，底层对马暖流水仅位于冲绳海槽区，并有着与黑潮中层水相同的温、盐特性；一种双锋结构出现在邻近黑潮的陆架边缘附近。在内陆架形成的陆架锋，由北向南伸展时，愈来愈偏向陆架边缘。而黑潮锋沿九州以西深槽的陆架边缘向北伸展。在黑潮转折点附近，两锋几乎合并为一条锋。狭窄的锋带由黑潮水及其变性水和陆架水的混合水所占据。     

Model Test of Sand Restraining Force on Pipeline

This paper describes the model tests for determining the axial friction and the lateral resistance of sand to pipeline by using fine sand and prototype pipeline, and the calculation method based on limit analysis theory is verified. The effect of cyclic loading is considered in the test.     

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.     

Siltation Prediction for Navigation Channels and Harbour Basins on Muddy Beach

- This paper, after briefly reviewing the experimental research on sediment transport on muddy beach since the 1950s, improves and perfects the method for forecasting siltation in navigation channels and harbour basins which was first put forward in China by the authors. In consideration of silty sediment and sand, some factors in forecasting methods have been changed and modified. Consequently, the modified methods can be used either to compute siltation in navigation channels and harbour basins on muddy beach or to compute siltation and scouring in navigation channels and harbour basins on both silty beach and sandy beach. The verification of field data from eleven large, medium and small natural harbours shows a good agreement between the forecasting by the modified method and the natural conditions. Finally, the paper deals with the rational utilization of water area after the construction of the West Dyke in Lianyungang, the maintenance of water depth of the navigation channel at the entrance, siltation distribution, siltation in the navigation channel and harbour basin for ships of 100 thousand tonnnage. Results once again prove that the prospect of constructing Lianyungang Harbour into a deepwater harbour is bright.     

Dynamic Analysis of a Single-Column Platform (II)

This paper describes the study of a single-column structure used as well-head platform. In order to check the reliability of computation theory and programme, model tests have been carried out. The paper introduces the conclusion of tests and the dynamic properties of single-column platform are obtained.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.