Complex resistivity of mineral rocks in the context of the generalised effective‐medium theory of the induced polarisation effect

This paper develops the generalised effective‐medium theory of induced polarisation for rock models with elliptical grains and applies this theory to studying the complex resistivity of typical mineral rocks. We first demonstrate that the developed generalised effective‐medium theory of induced polarisation model can correctly represent the induced polarisation phenomenon in multiphase artificial rock samples manufactured using pyrite and magnetite particles. We have also collected representative rock samples from the Cu–Au deposit in Mongolia and subjected them to mineralogical analysis using Quantitative Evaluation of Minerals by Scanning Electron Microscopy technology. The electrical properties of the same samples were determined using laboratory complex resistivity measurements. As a result, we have established relationships between the mineral composition of the rocks, determined using Quantitative Evaluation of Minerals by Scanning Electron Microscopy analysis, and the parameters of the generalised effective‐medium theory of induced polarisation model defined from the laboratory measurements of the electrical properties of the rocks. These relationships open the possibility for remote estimation of types of mineralisation and for mineral discrimination using spectral induced polarization data.     

Wind- and density-driven circulation in a bay on the Sanriku ria coast,Japan: study of Shizugawa Bay facing the Pacific Ocean

Flow fields in Shizugawa Bay on the Sanriku ria coast, which faces the Pacific Ocean, were investigated using hydrographic observations for the purpose of understanding oceanographic conditions and the process of water exchanges in the bay after the 2011 earthquake off the Pacific coast of Tohoku. In spring to summer, density-driven surface outflow is part of estuarine circulation and is induced by a pressure gradient force under larger longitudinal gradients in density along with lower salinity water in the innermost part of the bay, regardless of wind forcing. In winter to summer, another density-driven current with a thermal structure is induced by a pressure gradient force under the smaller longitudinal density gradients in calm wind conditions. Particularly in winter, Tsugaru Warm Current water can be transported in the surface layer inside the bay. Wind-driven bay-scale circulation with downwind and upwind currents in the surface and deeper layers, respectively, is induced by strong longitudinal wind forcing under the smaller longitudinal density gradients, irrespective of season. Particularly in fall to spring, this circulation can cause the intrusions of oceanic water associated with Oyashio water and Tsugaru Warm Current water in the deeper layer. These results suggest that wind- and density-driven currents can produce the active exchange of water from inside and outside the bay throughout the year.     

Structural architecture and low‐grade metamorphism of the Mikabu‐Northern Chichibu accretionary wedge,SW Japan

To understand tectono‐metamorphic processes within or close to the brittle–ductile transition of quartz‐rich crustal rocks in an accretionary wedge, an integrated field, petrological, geochronological and Raman spectroscopic study was conducted on the Mikabu‐Northern Chichibu belt in SW Japan. Field mapping in central Shikoku reveals that the Northern Chichibu belt is comprised of a pile of four tectono‐stratigraphic units, referred to as A, B, C and D units. The A unit (dominated by pelagic sedimentary rocks) represents the structurally lowest and youngest accretionary complex that forms a composite unit with the Mikabu ophiolitic suite. The B unit (consisting of chert‐clastic rock sequences) overlies the A unit and is overlain by the C and D units (mudstone‐matrix mélange units). Raman spectroscopy of carbonaceous material constrains the peak temperature of each unit to be ~290°C for the A unit, 270–290°C for the B unit, 230–250°C for the C unit and ~220°C for the D unit. Ductile deformation and pervasive metamorphism are limited to rocks in the Mikabu, A and B units. Alkali pyroxene and sodic amphibole occur in metabasite from the Mikabu, A and B units, and the widespread occurrence of prograde veins containing lawsonite+quartz pseudomorphs after laumontite was newly recognized from the C unit. Phase petrological data constrain the peak pressure of each unit to be ~0.65 GPa for the Mikabu‐A unit (aragonite stable), ~0.45–0.6 GPa for the B unit (jadeite+albite stable in the structurally lower part), and ~0.35 GPa for the C unit (prehnite+lawsonite stable). The peak metamorphic pressure increases towards structurally lower and younger accretionary complexes, but the thickness of the preserved strata is insufficient to account for the inferred pressure range. The structural–metamorphic relations imply thickening of the accretionary wedge by underplating was followed by a significant phase of thinning by both ductile and brittle processes.     

Organohalogen and organotin compounds in killer whales mass-stranded in the Shiretoko Peninsula, Hokkaido, Japan

Blubber and liver samples were obtained for analysis of wide ranges of contaminants from killer whales (Orcinus orca) which were locked away in drifting sea ice on the coast of Rausu, the Shiretoko Peninsula in Eastern Hokkaido, Japan in February 2005. Among the organohalogen compounds analyzed, DDTs were the predominant contaminants with concentrations ranging from 28 to 220 microg/g on a lipid-weight basis followed by PCBs and other organochlorine pesticides. PBDEs levels were two or three orders of magnitude lower than those of PCBs and DDTs. 2,3,7,8-Tetrachlorodibenzo-p-dioxin toxic equivalents (TEQs) derived by WHO mammal-TEF in killer whales were in the range of 110-440 pgTEQ/g. Mono-ortho coplanar PCBs contributed to 75-98% of total TEQs, indicating coplanar PCBs are significant contaminants for risk assessment in this species. The fact that hepatic residue levels of butyltins (from 13 to 770 ng/g wet weight) were much higher than those of phenyltins may be reflecting extensive use of tributyltin as antifouling paint.     

航空激光雷达用于森林测量的数据处理方法研究

航空激光雷达是最近十几年开发的最新测量技术.利用激光扫描器所获得的高度数据可以建立精密的地形模型,同时可以获得森林生产力的信息.无论是地形测量还是植被估算,在数据处理时都需要将来自地表和植被的信号分离开,即滤波.数据滤波的方法很多,但是都不成熟,而且处于技术保密状态.本文介绍目前主要的信号分类方法,并开发了动态阈值分离法.该方法以森林为解析对象,通过反复运算逐渐逼近,完成地表和植被的分离,从而实现了地形与森林测量的双重目的.通过引入地形因子把原地形转换为理想平地,大大减少了过度滤波或者滤波不充分的情况.本方法基本实现自动处理,容易操作.利用本方法计算的高度误差(均方差,RMS)为0.4-0.5m.本方法还适用于城市地区高程模型的建立.     

Seismic assessment of two multi-tiered pagodas damaged by the 2015 Nepal earthquake

A seismic assessment of two multi-tier pagodas by numerical analysis is presented herein.The Changu Narayan temple and the Kumbeshwar temple in Nepal are used as the case studies.Both pagodas are built of brick masonry in earthen mortar,with timber columns and crossbeams.The Changu Narayan temple is a two-tier pagoda,and was seriously damaged during the 2015 Gorkha earthquake.The Kumbeshwar temple is a five-tier pagoda,and its top-tier collapsed due to the Gorkha earthquake.A seismic assessment was carried out using finite element(FE)analysis.The FE models were prepared,and dynamic identification tests and penetrometer tests were conducted.Pushover analysis and nonlinear dynamic analysis were performed as part of the seismic assessment.The main shock of the 2015 Gorkha earthquake was considered as the input accelerograms.The behavior between the two pagodas was compared with the collapse mechanisms and damage patterns observed in the actual structures.The comparison suggested common structural features of multi-tier pagodas.This study is dedicated to providing a better understanding of the seismic behavior of multi-tier pagoda-type structures and provides suggestions for their effective analysis.     

Simulation of soil liquefaction distribution in downtown Mashiki during 2016 Kumamoto earthquake using nonlinear site response

Bulletin of Earthquake Engineering - Several sites located between Road No.28 and Akitsu River in downtown Mashiki were liquefied during the mainshock of the 2016 Kumamoto earthquake. According to...     

Space weathered rims found on the surfaces of the Itokawa dust particles

On the basis of observations using Cs‐corrected STEM, we identified three types of surface modification probably formed by space weathering on the surfaces of Itokawa particles. They are (1) redeposition rims (2–3 nm), (2) composite rims (30–60 nm), and (3) composite vesicular rims (60–80 nm). These rims are characterized by a combination of three zones. Zone I occupies the outermost part of the surface modification, which contains elements that are not included in the unchanged substrate minerals, suggesting that this zone is composed of sputter deposits and/or impact vapor deposits originating from the surrounding minerals. Redeposition rims are composed only of Zone I and directly attaches to the unchanged minerals (Zone III). Zone I of composite and composite vesicular rims often contains nanophase (Fe,Mg)S. The composite rims and the composite vesicular rims have a two‐layered structure: a combination of Zone I and Zone II, below which Zone III exists. Zone II is the partially amorphized zone. Zone II of ferromagnesian silicates contains abundant nanophase Fe. Radiation‐induced segregation and in situ reduction are the most plausible mechanisms to form nanophase Fe in Zone II. Their lattice fringes indicate that they contain metallic iron, which probably causes the reddening of the reflectance spectra of Itokawa. Zone II of the composite vesicular rims contains vesicles. The vesicles in Zone II were probably formed by segregation of solar wind He implanted in this zone. The textures strongly suggest that solar wind irradiation damage and implantation are the major causes of surface modification and space weathering on Itokawa.     

Degradation ofn-paraffin mixture by marine microorganisms in enriched seawater medium

The ability to degraden-paraffin mixture of two bacterial strains,Caulobacter sp. andFlavobacterium sp., isolated from sea water of Tokyo Bay was studied experimentally in the enriched seawater (ESW) medium. These bacteria degraded actively the mixture ofn-tridecane,n-tetradecane,n-pentadecane andn-hexadecane. The maximum rate of degradation was observed after a lag period of 2 to 8 day and these bacteria were found to degrade then-paraffin mixture at rates calculated to be in a range from 3.3×10^?12 to 3.4×10^?11 mg-oil cell^?1 h^?1 at 20°C. The maximum degradation rate,r _m mg-oil l^?1 h^?1, was correlated with the amount of the initial totaln-paraffin,S mg-oil l^?1, as expressed by the following equation: $$rm = (rm)\max \left( {\frac{S}{{S + Km}}} \right)$$ where (r _m )_max denotes the largest value ofr _m whenn-paraffin exists in large excess andK _m is a constant and represents the amount ofn-paraffin at which the degradation rate,r _m , reaches 1/2 of its largest value, (r _m )_max. The values of (r _m )_max andK _m were calculated to be as follows: In the case ofCaulobacter sp. (strain KM-1), (r _m )_max=6.0 mg-oil l^?1 h^?1 andK _m =191 mg-oillesw ^?1; in the case ofFlavobacterium sp., (r _m )_max=5.47 mg-oil l^?1 h^?1 andK _m =152 mg-oillesw ^?1.