藏北新生代两套钾玄质火山岩系列地球化学特征

岩石学和元素地球化学特征研究表明，藏北新生代自南向北沿可可西里岩带和喀喇昆仑—玉门岩带出露有两套钾玄质系列火山岩。它们富集大离子亲石元素(LILE)和轻稀土(LREE)及明显亏损Nb—Ta—Ti，同时具有板内和岛弧(陆弧)的双重特征。源区来源于可能与俯冲带流体有关的相似交代富集地幔，成岩过程主要经历了低度(＜10％)辉石分离结晶作用，同时，源区伴有地壳物质的混染作用。     

青藏高原东南部第四纪右旋剪切运动

通过对藏东南嘉黎断裂和滇西北断裂实地考察研究，表明青藏高原南部不存在统一的边界走滑断裂。嘉黎断裂的西段位于青藏高原南部，是一个南北挤压作用下的东西向伸展构造区，发育近南北向的地堑系，嘉黎断裂西段是这些地堑之间的转换断层，具有较高的右旋走滑速率。滇西北断裂与红河断裂构成川滇菱形块体的西南边界，该块体具有向东南逃逸和顺时针旋转运动。     

A synthetic optimization analysis method on structures with viscoelastic dampers

The paper introduces a synthetic optimization analysis method of structures with viscoelastic (VE) dampers, namely the simplex method. The optimal parameters and location of VE dampers can be determined by this method. Numerical example and a shaking table test about reinforced concrete structures with VE dampers show that the seismic responses of structures will be reduced more effectively when the parameters and location of VE dampers are designed in accordance with the results calculated by the simplex method.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

渤海—鲁西地区白垩-早第三纪裂谷活动——火山岩的地球化学证据

渤海—鲁西地区的白垩早第三纪火山岩在渤海东部主要沿郯庐断裂带呈北北东向分布,在渤海西部和鲁西地区主要沿北西向断裂带分布。白垩纪火山岩以安山岩类为主,早第三纪以玄武岩类为主,玄武岩浆源于富集型地幔,即富集轻稀土和大离子亲石元素,但明显亏损Yb、Ni和Cr等元素。火山岩的Sr和Nd同位素初始比值结果表明白垩纪的火山岩来源于Ⅱ型富集地幔,而早第三纪火山岩来源于接近原始地幔的略富集型地幔。这可能由于早第三纪岩石圈大规模伸展减薄,致使上地幔深部的亏损型物质上涌参与岩浆活动,与富集型地幔混染的结果。     

羌塘岩带碰撞后超钾质火山岩地球化学特征及成因探讨

羌塘超钾质火山岩为板块碰撞后的产物,地球化学特征表明,其同时具有板内火山岩和俯冲带岛弧火山岩的双重地球化学特性。化学组成上富含轻稀土和大离子亲石元素而亏损Cr、Ni等相容元素。在成因上受分离结晶作用和源区混合作用共同制约。源区为受古俯冲上地壳物质和下地幔上升流体交代混合的EMII型富集地幔端元,可能富含角闪石和金云母等矿物。     

基于约束点的曲线一致性化简

详细探讨了基于平面上的特征约束点(无论在曲线上还是在曲线外)的曲线化简，并针对各种情况提出了一致性化简的方法。     

Caledonian Low-Temperature Granulite-Facies Metamorphism in the West Kunlun Orogenic Belt—SHRIMP Chronological Evidence from Zircon

The West Kunlun orogenic belt is located at the conjunction of the paleo-Asian tectonic system and the Tethys tectonic system. Petrological and mineralogical studies of the Early Cambrian metamorphic surface crust in this region have shown that in case the metamorphism reached low-temperature granulate facies, the typical mineral assemblage is biotite-garnet-silimanite-K feldspar-plagioclase-quartz. The peak metamorphic temperatures are within the range of 720–740°C and the pressure is 0.6 GPa ±. Three types of metamorphic zircon have been detected in the metamorphic rocks: the complex inclusion-bearing type ; the early relic zircon inclusion-bearing type; and the inclusion-free type. SHRIMP age determination of these three types of metamorphic zircon have revealed that these zircons were formed principally during 400–460 Ma, indicating that pre-Cambrian metamorphic surface crust rocks underwent low-temperature granulite facies metamorphism during the Caledonian. In combination with the geological characteristics of this region, it is considered that when the oceanic basin was closed, there occurred intense intracontinental subduction (type A), bringing part of the Early Cambrian metamorphic basement in this region downwards to the lower crust. Meanwhile, there were accompanied with tectonic deformation at deep levels and medium- to high-grade metamorphism. This study provided important chronological and mineralogical evidence for the exploration of the evolutionary mechanism and process of the West Kunlun Early Paleozoic. Part of the results from the research project “ Research on the West Kunlun pre-Cambrian tectonic events” under the program “ Research on the important geological problems of China’ s pre-Cambrian” (No. 200113900070) sponsored by the China National Geological Surveying Bureau.     

高产高效综放工作面端面顶板稳定性监测

通过对支架与围岩关系的研究,分析了支架与顶板的相互作用机理,得出支架支护阻力与端面顶板下沉量p–△ld具有类双曲线关系,这种类双曲线关系是高产高效综放工作面端面顶板稳定性控制的基础。根据高产高效综放工作面的开采特点提出了端面顶板监测控制的特点和要求,开发建立了在线监测体系,现场应用取得了良好的技术经济效益。     

PowerComMap的设计与实现

以组件式地理信息系统的设计为核心，重点介绍了组件式地理信息系统平台PowerComMap的设计，并主要以其数据访问组件的实现为例，说明了组件式软件并不是传统软件的简单“包装”。