Equation of state of MgGeO3 perovskite to 65 GPa: comparison with the post-perovskite phase

The equation of state of MgGeO₃ perovskite was determined between 25 and 66 GPa using synchrotron X-ray diffraction with the laser-heated diamond anvil cell. The data were fit to a third-order Birch–Murnaghan equation of state and yielded a zero-pressure volume (V ₀) of 182.2 ± 0.3 Å³ and bulk modulus (K ₀) of 229 ± 3 GPa, with the pressure derivative (K′₀ = (?K ₀/?P) _T ) fixed at 3.7. Differential stresses were evaluated using lattice strain theory and found to be typically less than about 1.5 GPa. Theoretical calculations were also carried out using density functional theory from 0 to 205 GPa. The equation of state parameters from theory (V ₀ = 180.2 Å³, K ₀ = 221.3 GPa, and K′₀ = 3.90) are in agreement with experiment, although theoretically calculated volumes are systematically lower than experiment. The properties of the perovskite phase were compared to MgGeO₃ post-perovskite phase near the observed phase transition pressure (～65 GPa). Across the transition, the density increased by 2.0(0.7)%. This is in excellent agreement with the theoretically determined density change of 1.9%; however both values are larger than those for the (Mg,Fe)SiO₃ phase transition. The bulk sound velocity change across the transition is small and is likely to be negative [?0.5(1.6)% from experiment and ?1.2% from theory]. These results are similar to previous findings for the (Mg,Fe)SiO₃ system. A linearized Birch–Murnaghan equation of state fit to each axis yielded zero-pressure compressibilities of 0.0022, 0.0009, and 0.0016 GPa^?1 for the a, b, and c axis, respectively. Magnesium germanate appears to be a good analog system for studying the properties of the perovskite and post-perovskite phases in silicates.     

大规模真实感三维地形技术综述

计算机虚拟仿真领域的地形构建及显示方法的研究动态,描述三维地形建模、基于视点相关的细分简化、基于块的格网简化、模型的纹理映射和显示控制、误差度量中,分析和总结几个主要方法的特点及使用场合．     

Influence of sedimentary environments on mechanical properties of clastic rocks

The sedimentary environments are the intrinsic factor controlling the mechanical properties of clastic rocks. Examining the relationship between rock sedimentary environments and rock mechanical properties gives a better understanding of rock deformation and failure mechanisms. In this study, more than 55 samples in coal measures were taken from seven different lithologic formations in eastern China. Using the optical microscope the sedimentary characteristics, such as components of clastic rocks and sizes of clastic grains were quantitatively tested and analyzed. The corresponding mechanical parameters were tested using the servo-controlled testing system. Different lithologic attributes in the sedimentary rocks sampled different stress–strain behaviors and failure characteristics under different confining pressures, mainly due to different compositions and textures. Results demonstrate that clastic rocks have the linear best-fit for Mohr-Coulomb failure criterion. The elastic moduli in clastic rocks are highly dependent upon confining pressures, unlike hard rocks. The envelope lines of the mechanical properties versus the contents of quartz, detritus of the grain diameter of more than 0.03 mm, and grain size in clastic rocks are given. The compressive strength or elastic modulus and the grain diameter have a non-monotonic relation and demonstrate the “grain-diameter softening” effect.     

C++Builder结合Matlab在测量数据处理中的应用

根据测量数据处理的特点,通过对C++Builder6.0和MATLAB特点的分析,得出C++Builder6.0和MATLAB语言两者结合,能够大大提高测量数据处理效率。详细介绍了一种以C++Builder为系统开发平台,利用MATLAB进行测量数据处理的过程。并列举平差程序的一部分源码供参考。     

在“国土资源信息化建设成果展览”剪彩仪式上的讲话

各位来宾,各位代表,同志们:国土资源信息化建设成果展览,今天在美丽的昆明市隆重开幕了。我谨代表国土资源部,对展览的成功举办表示热烈的祝贺!向参与这次展览的各界代表和朋友们表示诚挚的问候!向各位来宾和同志们表示衷心的感谢!     

中国MODIS卫星影像彩色镶嵌图制作

本文介绍了大范围卫星影像彩色镶嵌图的制作流程．对于大范围卫星影像彩色镶嵌图制作的技术难点（去云、拼接、调色），文章进行了重点介绍并提出技术解决办法．利用MODIS卫星数据制作了两幅全国彩色影像镶嵌图：一幅为红波段（B1）、绿波段（B4）和蓝波段（B3）构成的真彩色合成影像：一幅为红波段（B1）．近红外波段（B2）和蓝波段（B3）构成的假彩色合成影像．两幅影像色彩精美，信息量丰富．     

黄骅坳陷扣村地区古近系沙三段高分辨层序地层分析

通过利用钻井、测井、地震等多种资料，以黄骅坳陷扣村地区古近系沙三段为例，详细论述了开展高分辨层序地层分析的研究流程、方法．在四级层序格架确定的基础上，叙述了以一般湖泛面和更小级别的岩性和结构层序单元界面的识别与类型的确定．指出通过露头、岩心、测井曲线和高分辨地震信息，可以确定短期旋回界面与超短期旋回界面．根据工区的特点选取主干剖面，建立高分辨率层序地层网络格架对比剖面，开展长、中、短期基准面旋回的分析、高分辨率层序地层的单砂体展布分析及其沉积微相研究．     

西藏阿里地区札达沉积盆地活动构造

野外初步调查结果表明，札达盆地不仅边界断裂存在较强烈的活动性，而且在盆地内部发现了较多的活动断层，同时还伴有大量的崩塌堆积。该调查结果为札达地区区域地壳稳定性的评价和青藏高原区域应力场的分析提供了宝贵的实际资料。     

CAPPS多箱模式中光化学模式的嵌套与城市大气臭氧数值预报

为解决城市边界层中大气O₃浓度的预报问题，选用一种简明有效的光化学反应方案建立光化学模式, 并与大气平流扩散的箱格预报模型进行了嵌套，从而将大气化学过程引入到城市空气污染数值预报系统 (CAPPS) 中。同时，根据实际需要研究了VOC (Volatile Organic Compounds) 浓度及NO_x源排放量等参数缺测时，根据前期监测浓度采用遗传算法反演未知参数的具体方法。利用2001年9月8~17日在北京舞蹈学院监测的O₃、NO_x资料及相应的气象数据，用改进后的CAPPS模式进行了单箱预报试验。预报试验结果表明，嵌套后的模式对O₃浓度的变化具备一定的预报能力。