Modeling of Landslide‐Generated Tsunamis with GRASS

The following research aims to enhance and spread the capacity of assessing risk due to landslide‐generated tsunamis by fostering the use of a GIS (Geographic Information System), and in this particular instance, an Open Source GIS (where “Open Source” can be loosely defined as freely available source code). For this purpose, we tested a procedure to be spatially implemented in the Open Source GRASS GIS through developing a module named r.impact.tsunami that simulates landslide‐generated tsunami. In this article we present its application in a case study performed on Como Lake (Lago di Como) in northern Italy. The review of the results identified sources of uncertainties while the model sensitivity outlined the influence of the parameters governing the model. Moreover, in order to verify the model validity, we implemented a new module (r.swe), that simulates the tsunami propagation and run‐up with the shallow water equations, and compared the results. Notwithstanding non‐negligible differences, the two models produced results of the same magnitude; this confirmed the validity of both models, although a rigorous validation of the models could not be performed due to the lack of observed data.     

Tectonics,sea-level changes and palaeoenvironments in the early Pleistocene of Rome (Italy)

The historical site of the Monte Mario lower Pleistocene succession (Rome, Italy) is an important marker of the Pliocene/Pleistocene boundary. Recently, the Monte Mario site was excavated and restudied. A spectacular angular unconformity characterizes the contact between the Monte Vaticano and the Monte Mario formations, which marks the Pliocene/Pleistocene boundary. Biostratigraphical analyses carried out on ostracod, foraminifer, and calcareous nannofossil assemblages indicate an Early Pliocene age (topmost Zanclean, 3.81–3.70 Ma) for the underlying Monte Vaticano Formation, whereas the Monte Mario Formation has been dated as early Pleistocene (Santernian, 1.66–1.59 Ma). Palaeomagnetic analyses point to C2Ar and C1r2r polarity chrons for the Monte Vaticano and the Monte Mario formations, respectively. The Monte Mario Formation consists of two obliquity-forced depositional sequences (MM1 and MM2) characterized by transgressive systems tracts of littoral marine environments at depths, respectively, of 40–80 m and 15–20 m. The data obtained from foraminifer and ostracod assemblages allow us to reconstruct early Pleistocene relative sea-level changes near Rome. At the Plio/Pleistocene transition, a relative sea-level drop of at least 260 m occurred, as a result of both tectonic uplift of the central Tyrrhenian margin and glacio-eustatic changes linked to early Pleistocene glaciation (Marine Isotope Stage 58).     

Tidal currents and wind waves controlling sediment distribution in a subtidal point bar of the Venice Lagoon (Italy)

The present study aims to improve current understanding of the sedimentation of subtidal point bars, analyzing interaction between tidal currents and waves in shaping a submerged meander bend of the microtidal Venice Lagoon (Italy), and it is based on coupling of sedimentological studies, geophysical analyses and numerical modelling. The Venice Lagoon is characterized by an average depth of about 1·5 m over subtidal platforms and a mean tidal range of about 1·0 m. The morphodynamic evolution of the lagoon is strongly affected by intense seasonal windstorms, which promote the formation of wind waves triggering sediment resuspension and bottom erosion. The study channel is 70 to 100 m wide, it has a radius of curvature of about 260 m and cuts through a permanently submerged subtidal platform. Water depth ranges from 1·0 to 5·0 m below mean sea level on the subtidal platform and channel thalweg, respectively. Different from classical architectural models, the study point‐bar beds do not show sigmoidal geometries, but consist of horizontally‐bedded deposits abruptly overlying clinostratified beds. Sedimentation in the study bar is hypothesized to stem from the interaction between the in‐channel secondary helical flow, as for most meander bends, and wave winnowing of the subaqueous overbank areas. Laterally accreting point‐bar deposits point out that the curvature‐induced helical flow redistributed sediment from the channel thalweg to the bar top and contributed to the development of the ‘classical’ fining‐upward grain size trend. The marked truncation surface, separating clinostratified bar deposits from overlying horizontally‐bedded platform sediments is interpreted here as due to bar top wave‐winnowing, which also possibly promoted bank collapses. In the proposed model, sediments remobilized from bar top and subaqueous overbank areas were transported into the channel, forming peculiar ‘apron‐like’ accumulations, where sand accumulated through avalanching processes and mud settled down from suspension.     

Development and Application of 2D and 3D GRASS Modules for Simulation of Thermally Driven Slope Winds

The ability to manage and process fully three‐dimensional information has only recently been made available for a few Geographical Information Systems (GIS). An example of integrated and complementary use of 2D and 3D GRASS modules for the evaluation and representation of thermally induced slope winds over complex terrain is presented. The analytic solution provided by Prandtl (1942) to evaluate wind velocity and (potential) temperature anomaly induced by either diurnal heating or nocturnal cooling on a constant angle slope is adopted to evaluate wind and temperature profiles at any point over both idealised and real complex terrain. As these quantities depend on the slope angle of the ground and on the distance from the slope surface suitable procedures are introduced to determine the coordinate n of a point in the 3D volume measured along the direction locally normal to the terrain surface. A new GRASS module has been developed to evaluate this quantity and to generate a 3D raster file where each cell is assigned the value of the cell on the surface belonging to the normal vector. The application of the algorithm implemented in GRASS to an ideal valley and to a real valley close to the city of Trento in the Alps provides results in accordance with data reported in the literature. An extension of Prandtl's (1942) model to take into account humidity and evaporation processes on the soil is also proposed and implemented.     

From Middle Jurassic heating to Neogene cooling: The thermochronological evolution of the southern Alps

The Dolomite region is located in the Southern Alps, which were affected by Mesozoic extensional tectonics and by consequent thermal perturbations. In this work, vitrinite reflectance and apatite fission-track analysis are used to estimate the thermal evolution. These methodologies have been applied to the Permo-Mesozoic succession, which crops out along the TRANSALP seismic profile. The regional distribution of the organic matter maturity seems to be mainly controlled by different burials reached during the Norian-Liassic extensional phase, in connection with high heat flow values. The best solutions obtained from thermal modelling of both vitrinite and fission-track data suggest that peak of high heat flow occurred during Bajocian–Bathonian ages, when western Tethys was characterized by intrusions of gabbros and plagiogranites and extrusion of tholeiite basalts. This time coincides with the onset of the drifting phase and related thermal subsidence. The following thermal relaxation occurred during continuous sedimentation and the maximum burial does not coincide with peak temperatures. Cooling history has been carefully analysed through apatite fission-track data on samples collected close to the Valsugana overthrust, which document an important exhumation event at about 10 Ma. The related erosion has been analysed through the combined use of arenite petrography and fission-track analysis on detrital samples of the Veneto foredeep succession, which represents the storage of detritus during Tertiary. These data confirm that after Serravalian the Southalpine domain and related covers were affected by subaerial erosion.     

Using GB-SAR technique to monitor slow moving landslide

A Ground-Based SAR (GB-SAR) interferometer was employed to measure the surface displacements of a landslide occurring in the Carnian Alps, north-eastern Italy, which has affected a national road and seriously damaged a road tunnel still under construction. Moreover, since the landslide is located on the left bank of the Tagliamento River Valley, it is feared that this mass movement might dam the river, creating a basin that would increase natural hazard for the valley inhabitants. The data collected from December 2002 to July 2005 by a conventional monitoring system, consisting of a GPS network and boreholes equipped with inclinometric tubes, showed that the landslide was moving at a quasi-constant rate of about 3 cm per year. Due to the slow deformation rate of the landslide, a recently developed GB-SAR technique based on the analysis of a restricted ensemble of coherent points was used. Two surveys, each lasting two days, were planned in December 2004 and July 2005, in order to map and measure the surface displacements that occurred over time. The results from the radar were compared with the ones derived from the GPS monitoring network. An agreement was achieved among the data collected, showing the capability of the GB-SAR technique to measure displacements even within a time span of several months between the surveys.     

A simple and efficient procedure for the numerical simulation of wind fields in complex terrain

In spite of recent progress in the prognostic numerical simulation of the atmospheric boundary layer, the explicit simulation of turbulent flows in actual complex terrain is generally still very complicated and time consuming for many environmental applications. In an attempt to develop simpler and more efficient application oriented techniques, although less refined, we propose a multi-step procedure for simulating wind fields. Once obtained the necessary meteorological input, the mass-consistent modelling technique is used to perform high-resolution mean wind flow simulations taking into account recent developments in the atmospheric boundary-layer theory. Besides, a procedure based on a generalisation of the local logarithmic law-of-the-wall over complex terrain is used to estimate the effective parameters characterising the simulated wind profiles. Turbulence intensities and spectral properties are then calculated through the estimated effective parameters, in particular through the effective friction velocity parameter. Finally, time series of the instantaneous velocity field are simulated by the Monte Carlo technique. Two applications of the proposed approach are discussed briefly: the first one is related to a coastal area in southern Italy (the Messina Straits), where the construction of the world’s longest central span bridge is being planned; the second one corresponds to the flow in a mountainous area in northern Italy (the Albenga Airport).     

Risk-based characterisation of an urban building site

The evaluation of the underground soil stratigraphy is a key aspect in geotechnical site characterisation. However, these means of site exploration are only pinholing subsoil conditions and expert knowledge is needed to understand subsoil conditions in order to build a reliable geological-geotechnical model. This contribution employs a geostatistical simulation methodology for the simulation of random fields representing geological uncertainty. This combines borehole data and expert knowledge via a mathematical framework. Moreover a risk-based site characterisation scheme is developed for urban site characterisation. This novel characterisation scheme offers additional insight into the effects of large-scale, geological spatial variability by using fragility curves to quantify these effects.     

Correction to: A novel methodological approach for land subsidence prediction through data assimilation techniques

Computational Geosciences - A Correction to this paper has been published: https://doi.org/10.1007/s10596-021-10079-6