The Impact of Orographically-Induced Gravity Wave on the Diurnal Cycle of Rainfall over Southeast Kalimantan Island

Precipitation measurements from the Tropical Rainfall Measuring Mission (TRMM) satellite indicate that the southeastern area of Kalimantan (Borneo) Island receives much less rainfall than elsewhere on the island during the period from July to October.Results from sur-face meteorological observations show that the diurnal cycle of rainfall differs greatly between the eastern and western coasts of the island.Rainfall on the western coast of the island is frequent in the afternoon and evening,whereas almost all rainfall on the eastern coast occurs in the morning.Meanwhile,the Global Positioning System (GPS)-derived precipitable water (PW) on the eastern coast shows a substantial decrease in moisture in the af-ternoon and evening.Numerical experiments with a mesoscale model reveal that gravity waves driven by di-urnal heating of the elevated land surface of the moun-tains on Sulawesi Island,which lies approximately 300 kilometers to the east of Kalimantan Island,significantly affect the diurnal cycle of rainfall over southeast Kali-mantan Island.     

A deep section of accretionary complex: Susunai Complex in Sakhalin Island, Northwest Pacific Margin

Abstract A deep section of accretionary complex, the metamorphosed Susunai Complex, is observed on Sakhalin Is., Russia. High pressure part of pumpellyite-actinolite facies metavolcanics, metacherts and metapelites are well exposed and constitute a tectonic pile preserving primary structures related to underplating of the oceanic crust. Three stages of deformation, D₁ through D₃, suggest successive deformation during subduction, underplating and exhumation of the complex. Oceanic material in the complex is more abundant than other well documented ancient accretionary complexes (e.g. the Shimanto Belt in southwest Japan and the Ghost Rocks Formation in Alaska), which were shallowly underplated. At Susunai, deep down-stepping of a décollément has scraped off the upper part of the oceanic crust, primarily the pillowed basalt horizon. This down-stepping results from crustal weakening as overpressured water is released from the fractured oceanic crust during metamorphism.     

A scaling model for quantification of earthquakes in and near Japan

A simple method is developed to determine seismic moments of earthquakes. The method is qualified through criteria such as simplicity of calculations, coverage of wide magnitude range, and insensitivity to detailed instrumental response. The method is applied to 163 major earthquakes which occurred underneath Japan and the Japan Sea in the time from 1926 to 1977. Magnitudes of these earthquakes, which have been determined by the Japan Meteorological Agency, (M_JMA) cover the range from 4.3 to 7.5. At first, source spectra are analyzed through a very simple way introducing two new parameters: characteristic period T_c and seismic-moment factor M_c. The former is defined as an average value of apparent periods of seismic waves with the maximum trace amplitude at many stations. The latter is an average of products of maximum trace amplitude and its apparent period multiplied by epicentral distance. It is shown that T_c corresponds to the period of the corner frequency of an earthquake and M_c to the seismic-moment density at the period of T_c. A scaling model of earthquake source spectra is presented which satisfies the empirical relations between the surface-wave magnitude M_s and M_JMA, and M_JMA and the body-wave magnitude m_b. Those relations are independent of the Gutenberg and Richter relation between M_s and m_b, because M_JMA is determined from maximum amplitudes of seismic waves with a period of about 4 sec. The static seismic moment of each earthquake can be estimated from calculated M_c using the source spectra of the scaling model. Seismic moments of 18 earthquakes determined by conventional analyses from near- and/or far-field observations are consistent with static seismic moments thus estimated over the range from 2 × 10²³ to 3 × 10²⁷ dyne cm. This shows the potential in practice of the present method, especially in the routine processing of seismic data.     

Expansion of the Nishinomiya Built Environment Database

The Nishinomiya Built Environment Database, which can be used to analyze the disaster process of the 1995 Hanshin-Awaji Earthquake Disaster in Nishinomiya City, has been expanded with new data entries. The database contains the following very detailed datasets: (1) the urbanization area base map, (2) casualty data, (3) three sets of building damage data surveyed by the Nishinomiya City, the Architectural Institute of Japan and the City Planning Institute of Japan, and the Kobe University, (4) building property data based on the real estate tax roll, (5) photographs of the damaged buildings with the information on the place and orientation of the picture, and (6) the estimated distribution of the seismic ground motion. The seismic ground motion was simulated for the southern part of Nishinomiya City and two verification sites in Kobe City and Amagasaki City. In the simulation, the borehole data of public facilities were used to model the surface soils as one-dimensional layers, taking into consideration the fact that the spatial distribution of the sediment/basement interface forms a slope. The model of the fault rupture process simulated the characteristics of the seismic motion at basement level, and amplification effects of the surface layers were evaluated based on multiple reflection theory. The distribution of peak ground acceleration and peak ground velocity was estimated from acceleration response spectra at each borehole point. In addition, the relationship between simulated seismic ground motion and building damage was studied based on newly proposed band-passed spectrum intensity using the expanded database. This confirmed that detailed categorization is necessary in order to evaluate the fragility functions, especially for reinforced concrete structures. The database should provide fundamental information for identifying the relationship between the ground motions and the extent and pattern of building damage, or the pattern of the occurrence of casualties.Presently     

Characterization of the amorphous state in metamict silicates and niobates by EXAFS and XANES analyses

X-ray absorption spectroscopy using synchrotron radiation has been applied to the investigation of the coordination geometries around Y, Zr and Nb atoms in metamict zircon, gadolinite, fergusonite, euxenite and samarskite. EXAFS and XANES spectra of their crystalline counterparts and synthetic compounds including ZrO₂, Y₂O₃, YNbTiO₆, YNbO₄, LiNbO₃, and NiNb₂O₆ were also measured for comparison. Metamict zircon shows a significant decrease in its Zr-O bond distances accompanying an increase in distortion of the Zr-O coordination polyhedra as compared with crystalline zircon. On the contrary, the average Nb-O bond distances and the symmetry of the coordination polyhedra around the Nb atoms in metamict euxenite and samarskite resemble those in the crystalline euxenite. Compared with crystalline fergusonite, a decrease in the distortion of the Nb-O octahedra is observed in metamict fergusonite. The structures of the second nearest neighbors (the metal-metal interactions) are largely disrupted in the metamict specimens except for metamict zircon and samarskite with high trivalent iron concentration. Nb in metamict samarskite is in octahedral coordination by oxygen and is similar to that in euxenite.     

Iterative deconvolution of complex body waves from great earthquakes—the Tokachi-Oki earthquake of 1968

A method of body-wave inversion is developed in an attempt to extract the information about asperities or barriers in a fault zone. A sequence of point sources, each being characterized with the seismic moment, the onset time and the location, are iteratively derived from observed records at multi-stations, where the two-dimensional extent of the source location is taken into account. A modification is made of the iterative method of Kikuchi and Kanamori on the formulation of inversion procedure to facilitate the computation.Using this method, we analyse long period P waves of the Tokachi-Oki earthquake of 1968 (M_w = 8.2) and obtain several significant subevents with time durations of ～ 10 s. Their spatio-temporal distribution shows that the rupture process consists of three characteristic stages: (A) a stage of introductory rupture, (B) a stage of main rupture and (C) a stage of aftershocks. The main rupture takes place in the form of clustering around a few sites of the fault plane. The largest subevent occurs in the northwestern corner. The stress drop associated with this event is estimated to be ～ 200 bars, one order of magnitude higher than the stress drop averaged over the entire fault plane. The sum of the seismic moments of the individual subevents amounts to 2.3 × 10²⁸ dyn. cm which approximately coincides with the one estimated from the analysis of long-period surface waves. This implies that the source of the Tokachi-Oki earthquake consists of several major subevents with time durations of ～ 10 s in addition to other minor subevents.     

Formation of bipolar flow by the stellar wind embeded in molecular disk

The interaction of the isotropic stellar wind with the rotating isothermal cloud surrounding the young star is investigated. The density distribution of the cloud is taken as that for the equilibrium state of the rotating isothermal cloud modified by adding the rarefied interstellar gas in the polar region. The development of the shock envelope and the structure of the shell induced by the stellar wind are obtained. It is shown that the envelope of the shock front elongates and opens to the polar direction with half opening angle of about 20 degrees resulting the bipolar flow which is able to reproduce well the observed properties for the outflow in the bipolar sources.     

Assessing the impacts of climate change on rice yields in the main rice areas of China

This paper assesses the impact of climate change on irrigated rice yield using B2 climate change scenario from the Regional Climate Model (RCM) and CERES-rice model during 2071--2090. Eight typical rice stations ranging in latitude, longitude, and elevation that are located in the main rice ecological zones of China are selected for impact assessment. First, Crop Estimation through Resource and Environment Synthesis (CERES)-rice model is validated using farm experiment data in selected stations. The simulated results represent satisfactorily the trend of flowering duration and yields. The deviation of simulation within ± 10% of observed flowering duration and ± 15% of observed yield. Second, the errors of the outputs of RCM due to the difference of topography between station point and grid point is corrected. The corrected output of the RCM used for simulating rice flowering duration and yield is more reliable than the not corrected. Without CO₂ direct effect on crop, the results from the assessment explore that B2 climate change scenario would have a negative impact on rice yield at most rice stations and have little impacts at Fuzhou and Kunming. To find the change of inter-annual rice yield, a preliminary assessment is made based on comparative cumulative probability at low and high yield and the coefficient variable of yield between the B2 scenario and baseline. Without the CO₂ direct effect on rice yield, the result indicates that frequency for low yield would increase and it reverses for high yield, and the variance for rice yield would increase. It is concluded that high frequency at low yield and high variances of rice yield could pose a threat to rice yield at most selected stations in the main rice areas of China. With the CO₂ direct effect on rice yield, rice yield increase in all selected stations.