Characterization of the mechanical properties of a claystone by nano-indentation and homogenization

Based on the analyses of mineralogical compositions by X-ray diffraction and microstructure by optical microscopy, the Young’ modulus and hardness of a claystone were characterized by the nano-indentation technique and homogenization method. Three distinct microstructural zones are identified in the claystone: clay matrix, a composite matrix of clay and small mineral grains and imbedded quartz grains. The elastic modulus and hardness of different zones were determined by nano-indentation testing. Based on the statistical analysis of nano-indentation results, the spatial mappings and frequency distributions of elastic modulus and hardness of the different zones were obtained. The elastic moduli of main constituent phases of the claystone are then estimated from the nano-indentation tests. These values were further used for the determination of the macroscopic elastic modulus of the claystone using two different homogenization schemes: the dilute scheme and Mori–Tanaka scheme. The predicted values by the homogenization schemes are compared with experimental data obtained from conventional uniaxial compression tests.     

A simple approach to evaluating leakage through thin impervious element of high embankment dams

Internal erosion is the most common reason which induces failure of embankment dams besides overtopping. Relatively large leakage is frequently concentrated at defects of impervious element, and this will lead to eventual failure. The amount of leakage depends not only on integrity of impervious element, but also on dam height, shape of valley, shape of impervious element and water level in reservoir. The integrity of impervious element, which represents the relative level of seepage safety, is not easy to be determined quantitatively. A simple method for generalization of steady seepage state of embankment dams with thin impervious element is proposed in this paper. The apparent overall value of permeability coefficient for impervious element can be obtained by this method with reasonable accuracy and efficiency. A defect parameter of impervious element is defined as an index to characterize seepage safety of embankment dams. It equals the ratio of the apparent overall value of permeability coefficient to the measured value in laboratory for intact materials. Subsequently, seepage safety of three dams is evaluated and the evolution of defect level of impervious element of dams is investigated. It is proved that the newly proposed method in this paper is feasible in the evaluation of relative seepage safety level of embankment dams with thin impervious element.     

Transport behavior of nZnO in geosynthetic clay liner used in municipal solid waste landfills under temperature effect

The transport process of nZnO in geosynthetic clay liner (GCL), an anti-seepage material used in municipal solid waste (MSW) landfills, under different seepage temperature conditions was conducted. The transport behavior of nZnO in GCL was analyzed. Results showed that the retardation performance of current GCL used in MSW landfills anti-seepage system against nZnO pollutants was poor. nZnO successfully permeated the GCL and entered external soil–groundwater environment, posing health threats to the life of organisms. Although seepage temperature exerted a small effect on nZnO suspension leakage volume, change in seepage temperature affects the mass of transported nZnO in GCL by redispersion of nZnO in suspension. As the seepage temperature increases, the mass of nZnO that permeated the GCL increases, reaching a maximum at 50 °C, and then decreases.     

Comparison of two alluvial aquifers shows the probable role of river sediments on the release of arsenic in the groundwater of district Vehari,Punjab, Pakistan

The study was done to assess the effect of the river Sutlej on arsenic (As) contamination. Sampling was done from the alluvial plain with increasing distance from the river Sutlej in district Vehari and compared with the study done in the proximity of River Sutlej. Sixty (60) groundwater samples mostly from shallow depths were collected and analyzed for As concentrations. Multivariate statistical tools (PCA and CA), saturation index, piper plots and Gibbs diagrams were used to detect evidence about the interrelationship and sources of As and other water quality variables responsible for groundwater contamination. Results revealed that As concentration ranged from below detection limit to 156 µg/L indicating that 50% samples exceeding the WHO guidelines (10 µg/L) and 17% exceeding the Pakistan National Environmental Quality Standards (NEQS) limits (50 µg/L) Sutlej. The piper plot revealed that water chemistry of the study area was Ca–HCO₃^?, Ca–Mg–Cl, type. Correlations between As and HCO₃^? (r²?=?0.433) was positive, while negative correlations were observed between As–Mn²⁺ and As–Fe²⁺ (r²?=???0.102), (r²?=?0.107) respectively. Geochemical signatures of the groundwater in the study area showed that the As could be released by oxidative dissolution to some extent and elevated evaporation in the arid environment of the study area under the stimulus of alkaline water and high pH (range 7.1–8.4). Although the concentrations are exceeding the WHO limit in 50% of the water samples but, are less than the previous study done in Mailsi near River Sutlej. Further, the concentrations decreased as the distance from the River increased which shows the probable role of sediments deposited by the River Sutlej.     

Study on the quantitative relationship between soil in situ strength and drilling parameters

The rational use of drilling parameters is a hot issue in the field of geotechnical engineering and geological engineering. A new method, for evaluating the bearing capacity of soils using drilling parameters was proposed. First, through the mechanical analysis of the drill bit, the preconditions and theoretical formulas for calculating the bearing capacity of soils using the bit’s torque are clearly defined. Next, drilling tests and dynamic cone penetration tests were performed on miscellaneous fill, silty clay, sandy clay, medium coarse sand and gravel sand, and the empirical formula for calculating the bearing capacity of these soils were given. Then, using the new method and the empirical formula, the bearing capacity of the soil under the roadbed was examined. The test results show that the bit’s torque is a good parameter for the evaluation of the bearing capacity of the soil. Finally, the application scope of the new method and the empirical formula is discussed, and the subsequent research directions are pointed out.     

Characterization,modeling, and remediation of karst in a changing environment

This introductory editorial paper provides a review and prospective outlook of the achievements and challenges in karst research under a changing environment. A brief discussion of the past and future karst research has been focused on: (1) data and new technologies; (2) modeling of karst flow and reactive transport; (3) responses of karst hydrosystems to climate variability and changes across scales.     

Correlation analysis between drought indices and terrestrial water storage from 2002 to 2015 in China

Drought monitoring is a key topic in environmental monitoring and assessment although there is still a need to determine the correlation between drought monitoring indices and remote sensing products. We analyzed the correlation between the self-calibrating Palmer Drought Severity Index (sc_PDSI), the Standardized Precipitation Index and the Standardized Precipitation Evapotranspiration Index (SPEI) and terrestrial water storage monitored through the Gravity Recovery and Climate Experiment (GRACE) on a monthly timescale from 2002 to 2015 in China. As a consequence of anomalies in the soil water budget, the highly significant correlation between the sc_PDSI and the GRACE satellite-observed terrestrial water storage suggested that these two datasets are the most suitable for use in monitoring droughts. In comparing the three drought indices, the sc_PDSI was introduced as a means of drought monitoring in the Yangtze, Pearl, Huaihe, Southeast and Songhua River Basins, whereas the SPEI was found to be more applicable to other major river basins, such as the Inland River Basin. These diverse spatial behaviors are caused by the differences between the hydrological droughts characterized by these three drought indices.     

Impact of drilling mud on chemistry and microbiology of an Upper Triassic groundwater after drilling and testing an exploration well for aquifer thermal energy storage in Berlin (Germany)

After completion of an exploration well, sandstones of the Exter Formation were hydraulically tested to determine the hydraulic properties and to evaluate chemical and microbial processes caused by drilling and water production. The aim was to determine the suitability of the formation as a reservoir for aquifer thermal energy storage. The tests revealed a hydraulic conductivity of 1–2 E-5 m/s of the reservoir, resulting in a productivity index of 0.6–1 m³/h/bar. A hydraulic connection of the Exter Formation to the overlaying, artesian “Rupelbasissand” cannot be excluded. Water samples were collected for chemical and microbiological analyses. The water was similarly composed as sea water with a maximum salinity of 24.9 g/L, dominated by NaCl (15.6 g/L Cl and 7.8 g/L Na). Until the end of the tests, the water was affected by drilling mud as indicated by the high pH (8.9) and high bicarbonate concentration (359 mg/L) that both resulted from the impact of sodium carbonate (Na₂CO₃) additives. The high amount of dissolved organic matter (>?58 mg/L) and its molecular-weight distribution pattern indicated that residues of cellulose, an ingredient of the drilling mud, were still present at the end of the tests. Clear evidence of this contamination gave the measured uranine that was added as a tracer into the drilling mud. During fluid production, the microbial community structure and abundance changed and correlated with the content of drilling mud. Eight taxa of sulfate-reducing bacteria, key organisms in processes like bio-corrosion and bio-clogging, were identified. It can be assumed that their activity will be affected during usage of the reservoir.     

Toxic metals in a highly urbanized industry-impacted estuary (Bahia Blanca Estuary,Argentina): spatio-temporal analysis based on GIS

Cadmium, chromium, nickel, and lead were evaluated in the particulate fraction at one of the most industrialized estuaries at the Southwestern Atlantic Ocean, through Geographic Information System (GIS). Concentrations were analyzed at 21 stations during 2008–2010. The highest metal concentrations (Cd: 8,9; Cr: 256,49; Ni: 27,02; Pb: 78,43 µg g^??1 d. w.) were recorded at the stations located near industrial and urban discharges situated along the estuary. In addition, Pb presented a different seasonal and spatial behavior in comparison with Cd, Cr and Ni. Winter and spring presented the higher concentrations of Pb, and the inner stations presented the higher values. The estuary is considered a moderate to strongly polluted and significantly polluted according to the Index of geoaccumulation (I_geo) and the Enrichment Factor of Cd, respectively. The Multidimensional Scaling plot showed three groups of stations: the inner, associated to low levels of metals (G1), middle stations (G2) with intermediate levels and the outer (G3) with the highest ones. In addition, this work reveals the usefulness of the GIS-mapping techniques in the distribution of pollutants along an estuarine environment and the environmental quality assessment of estuarine systems.     

Spatial and temporal analyses of air pollutants and meteorological driving forces in Beijing–Tianjin–Hebei region,China

Due to its negative impact on the living environment of human beings, ambient air pollution has become a global challenge to human health. In this study, surface observations of six criteria air pollutants, including PM_2.5, PM₁₀, SO₂, NO₂, CO and O₃, were collected to investigate the spatial and temporal variation in the Beijing–Tianjin–Hebei (BTH) region during 2013–2016 and to explore the relationships between atmospheric pollutants and meteorological variables using quantile regression model (QRM) and multiple linear regression model (MLRM). The results show that BTH region has experienced significant air pollution, and the southern part generally has more severe conditions. The annual average indicates clear decreasing trends of the particulate matters, SO₂ and CO concentrations over the last 4 years and slight increasing trends of NO₂ and O₃ in several cities. The seasonal and monthly characteristics indicate that the concentrations of five species reach their maxima in the winter and their minima in the summer, whereas O₃ has the opposite behaviour. Finally, the pseudo R² values show that the QRMs have the best performance in the winter, followed by spring, fall, and summer. Specifically, all the meteorological factors have significant impacts on air pollution but change with pollutants and seasons. The MLRM results are generally consistent with the QRM results in all seasons, and the inconsistencies are more common in the fall and winter. The results of this research provide foundational knowledge for predicting the response of air quality to climate change in the BTH region.