ASP.NET服务器组件技术在网络地图中的应用

在分析当前现有的网络地图发布技术优缺点的基础上,采用了目前大多数GIS厂商都使用的网络地图发布技术——栅格图像,为了克服该技术存在的交互能力弱的问题,引入ASP.NET服务器组件技术来实现地理空间数据的可视化和Web发布。重点介绍了ASP.NET服务器端组件的设计与实现,提出了基于ASP.NET服务器端组件的网络地图发布技术的体系结构,并提供了其原型系统来验证该技术的可行性与实用性。     

藓羽藻(Bryopsis hypnoides)核酮糖-1，5-二磷酸羧化酶／加氧酶的分离与活性测定

采用硫酸铵分部沉淀与凝胶过滤的方法，进行藓羽藻Rubisco的分离研究。结果表明，分离的藓羽藻Rubisco经SDS-聚丙烯酰胺凝胶电泳检测呈两条清晰条带，分别为Rubisco大亚基与小亚基；与菠菜相比，藓羽藻Rubisco大亚基分子量与菠菜基本相同，而小亚基较之稍大一些。藓羽藻Rubisco活力测定结果表明，Rubisco分离过程中用硫酸铵分部沉淀后活力降低许多，分离后活力有所上升，但仍比粗提液活力弱；在Rubisco活力测定过程中，藓羽藻Rubisco的活化温度与其它物种Rubisco活化的温度不同，在低温下活化效果较好。这些结果说明Rubisco的酶活力受硫酸铵的影响而且藓羽藻Rubisco相对陆地高等植物结构不稳定。     

基于RS与GIS技术的变更图斑自动识别方法研究

基于RS与GIS技术的土地利用变更图斑自动识别方法,即"以遥感正射影像图为基础,以地理信息和地物反射光谱为判别依据"的变更信息识别方法,能够尽量避免传统利用遥感影像分类技术进行地物变更识别存在的不足。本文通过对距离算法的改良,有效利用遥感数据的实时性和丰富性,在地理信息系统的支持下,提高了对地物变更地块的识别精度。     

电子地图符号构图规律的研究

根据电子地图屏幕显示与阅读的特点,应用地图视觉感受理论及地图符号学理论对电子地图符号的构图规律进行研究,是有效地改进电子地图设计所必需的。本文从电子地图符号构图规律研究的必要性入手,根据对电子地图视觉变量的理解,应用地图视觉感受理论和地图符号学理论,对电子地形图符号体系进行研究,同时根据符号库建库的需要,将所有符号分解为最小图元,提出了点状、线状及面状符号的构图规律。     

Geochemical characteristics and source analysis of inflow of mine water in Wang’ershan Gold Mine, Shandong

Through a systematic observation of water level and temperature, and a comprehensive analysis of the data on major/trace elements, nitrite, hydrogen-oxygen isotopes, the conclusion has been drawn that there are two relatively independent groundwater systems (cool water and hot water), and the geochemical indicators of hot/cool waters are described. The cool water system is relatively enriched in Ca2 , Mg2 and HCO3-. Its TDS is relatively low, about 1400–1800 mg/L. The hot water system is relatively enriched in K , Na , Cl- and SO42-. Its TDS is relatively high, about 2200–2300 mg/L. The cool water system is enriched in Ba, Ga, Cd, and the hot water system is enriched in B, Ti, Cr, Ni, Cu, Mo, Rb, and Cs, relatively. Especially, the contents of Rb and Cs in the hot water system are more than five times as high as those in the cool water system. The NO3- contents of cool water discharged from the gold mine are relatively high, and those of hot water are extremely low. The δD and δ18O values follow an increasing order of surface water>mine cool water>mine hot water. The cool water comes mainly from the lateral supply of phreatic water, while the hot water comes mainly from the vertical supply of deeply circulating structure-fracture water. The ratio of cool water over hot water was estimated to be about 1:1 by a water quality model..     

Environmental Investigation and Evaluation of Land Subsidence in the Datong Coalfield Based on InSAR Technology

Heavy mining of Jurassic and Carboniferous horizontal coal seams in the Datong coalfield has seriously affected the local geological environment, which is mainly manifested by such geohazards as soil avalanches, landslides, mudflows, surface subsidence, surface cracks, surface solid waste accumulation and surface deformation. More seriously, coal mining causes groundwater to leak. Overpumping of groundwater has resulted in substantial land subsidence of the urban area in Datong City. Based on the previous geo-environmental investigation in the work area, the authors used radar remote sensing techniques such as InSAR （synthetic aperture radar interferometry） and D-InSAR （differential synthetic aperture radar interferometry）, supplemented by the optical remote sensing method, for geo-environmental investigation to ascertain the geo-environmental background of the Datong Jurassic and Carboniferous-Permian coalfield and evaluate the effects of the geohazards, thus providing a basis for the geo-environmental protection, geohazard control and prevention, land improvement and optimization of the human environment. In this study 8 cog-nominal ERS-1/2 SAR data frames during 1992 to 2003 were used, but the following processing was made： （1） the multitemporal SAR magnitude images were used to interpret the geological structure, vegetation, microgeomorphology and drainage system; （2） the multi-temporal InSAR coherent images were used to make a classification of surface features and evaluate the coherence change due to coal mining; and （3） the multi-temporal cog-nominal SAR images were used to complete D-InSAR processing to remove the information of differential deformation areas （sites）. In the end, a ten-year time series of differential interferograms were obtained using the multi-temporal cog-nominal SAR images. In the tests, 84 deformed areas （sites） were obtained, belonging to those in 1993-1996, 1996-1997, 1997-1998, 1998-2001, 1998-2002 and 2001-2003 respectively. Of the 84 areas, 44 are m     

Petroleum Migration Direction of the Silurian Paleo-pools in the Tarim Basin, Northwest China

The results obtained in this paper indicate that carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has a high concentration and complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in studying petroleum migration of paleo-pool. During the basin＇s first-stage of oil-gas pool formation in the Silurian in Tazhong and Tabei areas of Tarim Basin （at the end of Silurian period） and the second-stage in the Awati area （in Permian）, the petroleum experienced a long-distance migration. During the formation of the Silurian paleo-pools in Tazhong Uplift at the end of Silurian, the petroleum mainly came from the lower and middle Cambrian source rocks in the Manjiaer sag. The petroleum migrated towards the southwest-south entering the Silurian reservoir beds in Tazhong first. Then, it further migrated within Silurian from northwest to southeast along the highs of the Structural Belts to the region of the Silurian pinchout boundary in Tazhong. In Tabei Uplift, during the first-stage of pool formation, the petroleum was also from the lower and middle Cambrian source rocks in the Manjiaer sag. It migrated northwest entering the Silurian reservoir beds in the Tabei Uplift firstly, and then the migration continued in the same direction within the Silurian reservoirs and finally the petroleum was trapped in higher positions. During the second-stage pool formation in the Silurian beds in the areas around Awati sag, the petroleum mainly came from the lower-middle Cambrian source rocks in the Awati sag. The petroleum migrated from the generation center to Silurian reservoirs in all directions around the sag through major paths, and the petroleum was finally trapped in higher locations.     

Study on Recovering the Earth＇s Potential Field Based on GOCE Gradiometry

Given the second radial derivative Vrr（P） ｜δs of the Earth＇s gravitational potential V（P） on the surface δS corresponding to the satellite altitude, by using the fictitious compress recovery method, a fictitious regular harmonic field rrVrr（P）^＊ and a fictitious second radial gradient field V：（P） in the domain outside an inner sphere Ki can be determined, which coincides with the real field V（P） in the domain outside the Earth. Vrr^＊（P）could be further expressed as a uniformly convergent expansion series in the domain outside the inner sphere, because rrV（P）^＊ could be expressed as a uniformly convergent spherical harmonic expansion series due to its regularity and harmony in that domain. In another aspect, the fictitious field V^＊（P） defined in the domain outside the inner sphere, which coincides with the real field V（P） in the domain outside the Earth, could be also expressed as a spherical harmonic expansion series. Then, the harmonic coefficients contained in the series expressing V^＊（P） can be determined, and consequently the real field V（P） is recovered. Preliminary simulation calculations show that the second radial gradient field Vrr（P） could be recovered based only on the second radial derivative V（P）｜δs given on the satellite boundary. Concerning the final recovery of the potential field V（P） based only on the boundary value Vrr （P）｜δs, the simulation tests are still in process.     

像素级遥感图像融合方法研究

多传感器遥感图像融合按信息表征层次的不同,可以分为像素级融合、特征级融合和决策级融合。本文介绍了像素级层次上的多种遥感图像融合方法,阐述了其融合原理和实现过程,分析了它们适用性和优缺点,并给出了遥感图像融合的一般评价指标。     

基于COM/AutoCAD的SPOT5卫星影像地物半自动成图方法

对使用COM ActiveX自动控件接口操作AutoCAD进行介绍,针对利用SPOT5 HRS立体影像进行地物要素成图问题提出基于COM/AutoCAD的矢量化方法,并着重阐述利用该方法制作1∶50 000地形图的主要问题。