Simulation of the east asian summer monsoon using a variable resolution atmospheric GCM

The East Asia summer monsoon (EASM) is simulated with a variable resolution global atmospheric general circulation model (GCM) developed at the Laboratoire de Météorologie Dynamique, France. The version used has a local zoom centered on China. This study validates the model's capability in reproducing the fundamental features of the EASM. The monsoon behaviors over East Asia revealed by the ECMWF reanalysis data are also addressed systematically, providing as observational evidence. The mean state of the EASM is generally portrayed well in the model, including the large-scale monsoon airflows, the monsoonal meridional circulation, the cross-equatorial low-level jets, the monsoon trough in the South China Sea, the surface cold high in Australia, and the upper-level northeasterly return flow. While the performance of simulating large-scale monsoonal climate is encouraging, the model's main deficiency lies in the rainfall. The marked rainbelt observed along the Yangtze River Valley is missed in the simulation. This is due to the weakly reproduced monsoonal components in essence and is directly related to the weak western Pacific subtropical high, which leads to a fragile subtropical southwest monsoon on its western flank and results in a weaker convergence of the southwest monsoon flow with the midlatitude westerlies. The excessively westward extension of the high, together with the distorted Indian low, also makes the contribution of the tropical southwest monsoon to the moisture convergence over the Yangtze River Valley too weak in the model. The insufficient plateau heating and the resulting weak land-sea thermal contrast are responsible for the weakly reproduced monsoon. It is the deficiency of the model in handling the low-level cloud cover over the plateau rather than the horizontal resolution and the associated depiction of plateau topography that results in the insufficient plateau heating. Comparison with the simulation employing regular coarser mesh model reveals that the local zoom technique improves, in a general manner, the EASM simulation.     

江西银山多金属矿床伊利石的形成与流体成矿作用的初步研究

江西银山多金属矿床的热液蚀变粘土矿物主要由伊利石组成,伊利石主要由流体作用过程中长石的伊利石化形成,其结晶度与成矿流体作用密切相关.银山第1期铅锌银成矿作用,水/岩比相对较低,成矿流体以孔隙渗透为主,溶质迁移慢,形成含有少量膨胀层的伊利石;第2期铜金成矿作用,水/岩比相对较高,流体的运移方式以通道式或裂隙式为主,溶质迁移的速度快,形成不含膨胀层的伊利石.研究表明成矿作用过程中的伊利石化主要与铅锌银矿化有关,而绿泥石化与铜金矿化有关.     

胜利油田孤岛油区馆陶组上段沉积结构单元

结构单元分析法(Architectural-Element Analysis)作为一种比较成熟的研究方法,已广泛应用于古代河流沉积研究.本文首次根据钻孔资料分析胜利油田孤岛油区馆陶组上段5～1+2砂层组河流沉积的结构单元.该段5～1+2砂层组岩石类型简单,可分为11个岩相类型.根据界面特征、岩相组合、内部几何形态、外部几何形态和垂向剖面特征等划分出6个结构单元:河道滞流沉积(CHL)、侧向加积砂坝(LA)、天然堤(LV)、决口扇(CS)、决口水道(CR)和洪泛平原细粒(FF).其中洪泛平原细粒(FF)、决口扇(CS)和侧向加积砂坝(LA)结构单元最为发育,其次是天然堤(LV)和决口水道(CR)结构单元,而河道滞流沉积(CHL)结构单元则不甚发育.决口扇(CS)结构单元是馆陶组上段砂体发育的主要单元之一,且富含油气资源.因此,进一步加强决口扇的研究对油气资源的勘察是十分必要的.     

古炭屑与古森林火?

森林火普遍发生在地质历史时期中，它对自然植被系统的演替起着重要作用。不同强度和频率的森林火培育出不同类型的植被：频繁的森林火导致草甸的形成，而热带雨林形成的原因之一是森林火的缺乏。古炭屑作为古森林火的遗迹，具有分布广泛、细胞结构保存完好以及原地埋藏等特点，为研究古森林火发生的强度和频率提供了宝贵的材料。古炭屑的出现与当时的气候因素、植被类型和地理状况有密切关系：干旱、少雨的气候常常伴随高频率森林火的发生，表现出古炭屑的数量增多；易燃物种组成的植被易发生森林火，古炭屑的出现也会增多，而耐火树种会降低森林火的强度，古炭屑则出现少。因此，从古炭屑的数量和种类的变化，可探讨古森林火的发生规律，进而推断长期地质历史时期的气候、植被、地理状况的演变。     

苏皖地块－－特提斯演化阶段独立的构造单元

基于苏皖地区的基底性质、晚元古代-中生代特征的沉积-火成建造、区域成矿和构造专属性，结合古地磁资料，提出了苏皖地块是特提斯演化阶段独立的构造单元的观点。它以苏鲁洋与华北克拉通间隔。震旦纪-早古生代的建造及变形特征与扬子克拉通有差异。石炭纪末和早二叠世的沉积和生物群表明它当时是古特提斯洋域里的一个中间地块，此时它已独立于扬子克拉通之外。三叠纪时苏鲁洋发生过大规模的消减但未闭合，因而苏皖地块的晚三叠世植物群与扬子克拉通有较明显区别。苏皖地块与华北克拉通（指胶辽地块）碰撞可能发生在早白垩世，该地区超高压变质岩的折返与之有关。之后，苏皖地块成为亚洲大陆雏形的一部分。     

山东车镇凹陷东部古近系沙河街组成岩作用

车镇凹陷沙河街组的沉积体系受控于盆地内的构造、物源供给以及沉积时的气候环境。以岩石学特征为基础，描述了成岩过程中压实与压溶作用、胶结作用、溶解作用与次生孔隙的特征，以及次生孔隙带在本区的分布。论述了碳酸盐胶结物与粘土矿物胶结作用的特点。粘土矿物蒙脱石-伊利石转变具有明显的渐变与突变交替的演化程式，其演化经历了蒙脱石带、渐变带、迅速转化带和伊利石带以及蒙脱石向伊利石的转变带。沙河街组的成岩作用划分为早期成岩阶段（A期、B期）和晚期成岩阶段（A期、B期、C期），并提出了成岩阶段的划分标志。     

油田开发中后期岩相单元的细分研究

油田开发中后期建立在原小层对比和沉积微相基础上的储层地质模型已不能适应调整挖潜和剩余油分布研究的要求,需要在小层划分的基础上,进一步细分到岩相单元。本文以大庆长垣南部葡北油田葡I组油层为例提出岩相单元的概念,通过现代沉积研究论证岩相单元细分的可行性,结合密井网测井曲线分析旋回性、隔夹层分布的稳定性及目前经济技术和采油工艺等,探讨细分单元的基本原则。最后提出岩相单元细分的基本方法。     

贵州关岭生物群中植物化石的发现及其意义

关岭生物群是近年来在我国贵州关岭地区瓦窑组中发现的一个十分重要的生物群 ,其中的植物化石经研究计有 Equisetites cf.arenaceus(Jaeger) Bronn.、Ctenozamitessarrani Zeiller。依据植物化石 C.sarrani常见于晚三叠世和 E.cf.arenaceus系似木贼属中较古老的类型 ,指出含植物化石的地层时代为晚三叠世卡尼期。瓦窑组系海相沉积 ,其中的植物化石无疑为异地埋藏 ,但从化石通常保存尚好来看 ,估计搬运的距离不会很远 ,它们可能是从距海岸不远的陆地被河流带到较平静的海湾或海槽而沉积下来的。此外 ,从该组植物茎干化石具清楚的年轮分析 ,推测卡尼期时 ,贵州关岭一带为非热带雨林地区 ,一年中气候不是四季如一 ,而是有明显的季节变化     

黄河下游壶穴的研究

黄河下游(泺口以下)发育了大量的壶穴(Pothole),按成因可以分为6种:流水侵蚀、风蚀、圆砾铸模、冰压刻、冰融水滴蚀及泄气侵蚀。流水侵蚀形成的圆形Pothole规模不一,小者直径在十余厘米,深数厘米,大者直径达数米,深1 m余;风蚀形成的圆形Pothole规模一般比较小,直径多在二、三十厘米以下,深10 cm以下,大部分穴壁缓斜,状如盘碟;圆砾铸模形成的Pothole规模一般较小,直径多在一、二十厘米以下、穴壁陡倾,状如锅穴;冰融水滴蚀形成的Pothole形态复杂,规模不一,既有穴壁缓斜的盘碟状者,也有穴壁陡倾近乎直立的近圆柱状者,直径从不足1cm到三、四十厘米,其穴缘、穴壁和穴底常有次级构造;泄气侵蚀形成的Pothole更是十分复杂,平面形态可以圆形到近圆形甚至其他复杂形态,穴壁可以非常平缓,也可以陡倾,直径从数厘米到数十厘米,深数毫米到二、三十厘米,穴缘和穴壁也常有次级伴生构造,既可单独产出,也可成群产出,同时还可以多个密集产出,状如蜂巢,这一类Pothole的成因极为独特,主要与黄河断流河床捕获的空气泄漏有关。     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on DDMF and ADMF

Multiple tuned mass dampers (MTMD) consisting of many tuned mass dampers (TMDs) with a uniform distribution of natural frequencies are taken into consideration for attenuating undesirable vibration of a structure under the ground acceleration. A study is conducted to search for the preferable MTMD which performs better and is easily manufactured from the five available models (i.e. MTMD‐1 – MTMD‐5), which comprise various combinations of the stiffness, mass, damping coefficient and damping ratio in the MTMD. The major objective of the present study then is to evaluate and compare the control performance of these five models. The structure is represented by its mode‐generalized system in the specific vibration mode being controlled by adopting the mode reduced‐order approach. The optimum parameters of the MTMD‐1 – MTMD‐5 are investigated to reveal the influence of the important parameters on their effectiveness and robustness using a numerical searching technique. The parameters include the frequency spacing, average damping ratio, tuning frequency ratio, mass ratio and total number. The criteria selected for the optimum searching are the minimization of the maximum value of the displacement dynamic magnification factor (DDMF) and that of the acceleration dynamic magnification factor (ADMF) of the structure with the MTMD‐1 – MTMD‐5 (i.e. Min.Max.DDMF and Min.Max.ADMF). It is demonstrated that the optimum MTMD‐1 and MTMD‐4 yield approximately the same control performance, and offer higher effectiveness and robustness than the optimum MTMD‐2, MTMD‐3, and MTMD‐5 in reducing the displacement and acceleration responses of structures. It is further demonstrated that for both the best effectiveness and robustness and the simplest manufacturing, it is preferable to select the optimum MTMD‐1. Copyright © 2002 John Wiley & Sons, Ltd.