苍山5.2级地震异常群体时空演化特征

在对 1 995年山东省苍山 5 2级地震异常筛选的基础上 ,分析了异常群体阶段性演化过程。结果表明 ,震前 1 0a左右震中周围出现小震小区域综合断层面解主压应力P轴偏转 (约 3 0°) ,震前 7a左右震中附近 3～ 4级地震增强集中及应变释放加速 ;震前 4a左右转为异常平静 ;震前 1a左右震中外围开始出现形变类前兆异常 ,前兆异常台站比和异常台项比约达 6%及 4%左右 ,异常比例偏少 ;震前约半年起 ,以震中附近地震波速比异常出现为起点 ,相继出现各类前兆异常 6条 ,短期前兆异常台站比和异常台项比分别约达 2 5 %和 1 7%左右 ,显示孕震进入短期阶段 ,但临震异常不明显。对由此获得的 5级地震预测启示进行了讨论。     

地震静校正全局最优化问题的求解

针对地震静校正存在的非线性和多参数性等问题，本文提出了一种全局优化的剩余静校正方法.在模型更新规则上，把模拟退火方法和均匀优化设计方法结合在一起，使模型的更新更为合理，从而加快了搜寻全局最优解的速度.同时提出了模型的不同分量的温度参数和退火过程的选取方式，把温度参数的选取与地震剖面的能量联系起来，使温度参数的选取具有自适应的特点.该方法克服了常规模拟退火方法所具有的寻优空间不均匀以及退火参数需通过多次试验选取的缺陷.通过实际地震资料的计算证明，本文提出的方法对地震静校正问题合理而有效.     

基于神经网络的单元自动机CA及真实和忧化的城市模拟

提出了一种基于神经网络的单元自动机（ＣＡ）。ＣＡ已被越来越多地应用在城市及其它地理现象的模拟中。ＣＡ模拟所碰到的最大问题是如何确定模型的结构和参数。模拟真实的城市涉及到使用许多空间变量和参数。当模型较复杂时，很难确定模型的参数值。本模型的结构较简单，模型的参数能通过对神经网络的训练来自动获取。分析表明，所提出的方法能获得更高的模拟精度，并能大大缩短寻找参数所需要的时间。通过筛选训练数据，本模型还可以进行优化的城市模拟，为城市规划提供参考依据。     

塔里木盆地西部含盐系地层成盐元素的地球化学初步研究

钾矿是我国目前紧缺的矿种之一 ,钾矿的寻找对我国有着十分重要的意义。塔里木盆地是我国第三系地层的广泛发育区域 ,有一定的找钾远景 ,尤其是库车、莎车等地区。通过对塔里木盆地 (坳陷 )西部的区域地质概况、成矿条件等的介绍 ,运用地球化学的分析测试手段 ,对塔里木盆地西部采集到的样品作了地球化学分析。论述了该区成盐沉积的地球化学特征 ,并讨论了该区形成钾矿的可能性。     

信阳市燃气混气站断裂活动性和场地稳定性系统研究

运用多学科、多手段相结合的方法，从区域构造稳定性、构造岩研究、构造裂隙统计分析、红外相位法位移监测，高密度电阻率法、钻探验证、年代学研究、新构造运动分析、遥感图像解译、地震安全性评价、数值模拟、工程地质条件分析等方面入手，对信阳市燃气混气站的断裂活动性和场地稳定性进行了全面而系统的论证；指出场区断裂规模小，第四纪无大规模差异升降运动，无活动断裂通过，邻区地震活动小且弱，区域构造稳定性高，应力平缓，工程地质条件良好，是一个稳定的“岛区”，井指出系统而全面的综合研究方法是研究工程稳定性项目行之有效的手段。     

天津地区井水位年变异常研究

近年来 ,中国地震预报学者开始关注井水位的年变异常及其中短期预测意义问题 ,但井水位年变异常判别采用动态图像的定性对比方法 ,表现出一定的随意性。针对这种现状 ,文中引进概率论与数理统计中的随机过程理论与时间序列分析技术 (盛骤等 ,1989) ,提出了“井水位动态年周期法”与“相对时段速率比较法” ,解决了井水位年变异常的定量识别方法 ,并应用到天津井网 2 1口井的观测数据 (1985年以来 )分析中 ,证明了该方法的可行性与有效性。分析结果表明 ,天津井网中有 7口井在首都圈邻区 4次中强 (MS≥ 5 .8)地震之前 ,表现出 17井次的井水位年变异常 ,且多在震前 1.5～6个月内出现 ,从而再次证明了井水位年变异常具有一定的中短期预测意义     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.     

杭州市区春节期间空气质量变化特点

分析近3年春节期间的空气质量资料，结果表明，杭州市区环境空气中PM10、SO2、NO2浓度较高，烟花爆竹燃放期间3种污染物出现高峰值，这与烟花爆竹燃放有关，PM25／PM10的比值高于年均值。     

气象卫星观测资料的分析在城市区域气象环境研究中的应用

目前 ,我国气象部门相当普遍地拥有气象卫星观测资料 ,但是 ,这些资料如何在城市气象服务以及为城市建设规划等方面的决策研究中发挥作用 ,急待进一步研究并开展工作。本文试图通过合理的反演处理 ,给出卫星观测对地面温度的测量结果 ,由此可比较细致地分析了解地面热状况及其与土地利用类型 ,地面覆盖性质等的关系。本文利用有限的 NOAA- AVHRR气象卫星遥感资料 ,采用修正的 Ulivieri分裂窗方法反演出同期的地表温度场 ,通过对北京地区的卫星观测资料进行算例分析 ,揭示出一个 2 0 0 km× 2 0 0 km范围内的地面温度分布特征。反演结果可以明显地揭示出城市热岛现象的变化规律 ,并且能较为清楚地反映出相对的高温区和低温区