Simple models for dynamic melting in an upwelling heterogeneous mantle column: Analytical solutions

Several lines of evidence suggest that the melt generation and segregation regions of the mantle are heterogeneous, consisting of chemically and lithologically distinct domains of variable size and dimension. Partial melting of such heterogeneous mantle source regions gives rise to a diverse range of basaltic magmas. In order to better assess the role of source heterogeneity during mantle melting, we have undertaken a theoretical study of trace element distribution and fractionation during concurrent melting and melt migration in an upwelling, chemically heterogeneous, two-porosity double lithology melting column. Analytical solutions for the abundance of a trace element in the matrix and channel were obtained under the assumptions that the porosity, melt and solid velocities, and solid-melt partition coefficients are constant and uniform. For simplicity, we neglected diffusion and dispersion in the melt. Chemical source heterogeneities of arbitrary size and shape were integrated into the simple melting models by allowing trace element abundance in the source region to vary as a function of time and space. Concurrent melting and melt migration in an upwelling heterogeneous mantle may be approximated as a quasi-steady state problem in which time-dependent concentration patterns produced by melting of heterogeneous source regions are superimposed on a reference steady-state concentration distribution established by melting of the ambient or background mantle. Chromatographic fractionation is especially important for the matrix melt and solid when chemical heterogeneities are involved during melting and melt migration in the mantle, giving rise to significant phase-shift between two incompatible trace elements in the matrix melt and scattered correlations among incompatible trace elements in residual peridotites. Mixing is the chief mass transfer process in the dunite channel where the chromatographic effect is negligible for most of the incompatible trace elements. The lack of chromatographic fractionation among incompatible trace elements and isotopic ratios in MORB suggests either most MORB are channel melts or mixing in magma conduit and chamber is very efficient such that the phase-shift is averaged out during magma transport and storage processes. Advection brings melt produced by smaller-degree of melting in the deeper part of the melting column to the overlying melting region, increasing the incompatible trace element abundance in the matrix and the channel. This advection-induced self-enrichment is especially important when heterogeneous sources are involved and may account for some of the enriched incompatible trace element patterns observed in residual peridotite that were previously interpreted to be a result of mantle metasomatism. Systematic studies of high-resolution spatially correlated mantle samples may help to constrain the melting history and the size and nature of chemical heterogeneities in the mantle.     

Considerations for conducting incubations to study the mechanisms of As release in reducing groundwater aquifers

Microbial Fe reduction is widely believed to be the primary mechanism of As release from aquifer sands in Bangladesh, but alternative explanations have been proposed. Long-term incubation studies using natural aquifer material are one way to address such divergent views. This study addresses two issues related to this approach: (1) the need for suitable abiotic controls and (2) the spatial variability of the composition of aquifer sands. Four sterilization techniques were examined using orange-colored Pleistocene sediment from Bangladesh and artificial groundwater over 8 months. Acetate (10 mM) was added to sacrificial vials before sterilization using either (1) 25 kGy of gamma irradiation, (2) three 1-h autoclave cycles, (3) a single addition of an antibiotic mixture at 1× or (4) 10× the typical dose, and (5) a 10 mM addition of azide. The effectiveness of sterilization was evaluated using two indicators of microbial Fe reduction, changes in diffuse spectral reflectance and leachable Fe(II)/Fe ratios, as well as changes in P-extractable As concentrations in the solid phase. A low dose of antibiotics was ineffective after 70 days, whereas autoclaving significantly altered groundwater composition. Gamma irradiation, a high dose of antibiotics, and azide were effective for the duration of the experiment.     

西藏马攸木金矿床金银互化物的赋存状态

马攸木金矿床是西藏近年发现的首例规模较大、矿石品位富、金成色高的岩金矿床.作者通过对马攸木金矿床矿石组构、矿石共生组合及矿物特征研究发现,金银互化物主要有自然金、含银自然金、银金矿、自然银.载金矿物为黝铜矿、针铁矿、脆硫锑铅矿及石英;金银互化物的赋存形式主要为包裹体金、裂隙金及粒间金.金银互化物的形成、富集与热液成矿作用及表生风化作用关系密切.     

喜马拉雅山脉的地质地貌特征:来自SRTM数字高程模型和降水量数据的约束

利用GTOPO30和SRTM3数字高程(DEM)数据,提取了喜马拉雅山脉(造山带)的数字高程模型并对其进行了地质地貌的初步分析。从SRTM3数字高程数据提取出坡度数据,初步分析了喜马拉雅山脉坡度和高程的特征。数字高程和坡度图清楚地展现了喜马拉雅大型断裂带(构造边界)的空间分布特征。分析了中国气象局下属的西藏、青海、四川和云南4省区气象观测台站55年来的年平均降水量观测数据、喜马拉雅山脉南坡的年平均降水量数据、喜马拉雅DEM和裂变径迹数据,发现喜马拉雅山脉从东至西,年平均降水量逐渐减少,地形起伏逐渐变小,而高程渐次升高,与此同时剥蚀速率降低;从北至南,年平均降水量逐渐增加,地形起伏增大,高程快速降低,而剥蚀速率则急剧升高。这充分说明了喜马拉雅年平均降水量大的地区,地表剥蚀作用相对较强,年平均降水量小的地区,地表剥蚀作用则较弱,即:在喜马拉雅地区,长周期的地表剥蚀过程(可长达数个百万年时间尺度)和短周期(仅仅50年)的降水量观测是耦合的。     

青藏高原中、东部局地因素对地温的双重影响(Ⅰ): 植被和雪盖

青藏高原冻土区地温既受海拔、纬度和经度(干燥度)区域地带性规律控制, 同时它又受植被、雪盖、砂层、 水被和地质构造等局地因素的显著影响. 局地因素对地温的影响具有双重性: 在不同域值条件下, 它可增高或降低地温. 地温随植被覆盖度减小而逐渐增高, 但覆盖度减到0～20%时, 地温反而降低. 在青藏高原东部、南部和腹部的高山区, 冷季降雪多, 很多地段为稳定积雪区, 雪盖厚, 持续时间长, 对浅层地温起保温作用;而高原腹部的高平原、河谷和盆地冷季降雪较少, 雪盖薄, 持续时间较短, 一般保温作用微弱. 当雪盖厚度超过20 cm以后, 保温作用即开始增强;在暖季因积雪存在时间短, 雪盖薄, 短期内对浅层地温起冷却作用. 总之, 每种局地因素迫使地温向相反方向转化阶段是一个区间值, 为渐变过程. 随时空尺度变化, 局地因素的影响变化很大. 有些地段, 几种局地因素共同作用, 加上活动构造和地形、地貌等的影响, 使地温的时空分布和局地因素对其影响或控制变得错综复杂. 因此, 研究和预测地温特征和变化趋势, 需要在监测植被和积雪作用的基础上进行参数选择、 验证和优化.     

寒区线性工程沿线冻土区的植被恢复

寒区油气管道、公路、铁路等线性工程占地、建设和开挖对沿线寒区生态环境是一个切割、破碎的过程, 对自然植被和下伏冻土造成了很大的扰动. 管道泄露引发的油污还可引起植被的退化和死亡. 植被覆盖层破坏后改变了原有的地气界面之间的水、热交换条件和力学性质, 反过来又可加速引发下伏冻土和线性工程地基的退化. 基于保护线性工程地基及下伏冻土的目的, 同时顺应环境保护的要求, 目前就寒区线性工程的植被恢复问题已经有许多探索和实践. 当前, 寒区植被恢复注重最低限度的人为介入干预下的自然恢复, 根据线性工程沿线土壤、湿度、营养条件、物种分布和丰度, 视具体情况选择物种, 确定建植方法. 阿拉斯加管道和青藏铁路植被恢复上的经验和方法, 可为拟建的冻土区中俄输油管道项目沿线的植被恢复问题提供科学的参考和借鉴.     

祁连山不同植被类型对积雪消融的影响

为研究祁连山植被对积雪消融的影响, 利用人工调查积雪深度逐日变化量和积雪盖度变化, 并结合空气雪面感热通量(SH)观测, 对祁连山水源林生态站排露沟流域海拔2 600～2 700 m青海云杉林、灌丛林、林缘、阳坡草地在2003-2007年的积雪消融进行了研究, 每年的观测从10月降雪开始到翌年5月积雪消融完结束, 共获取数据134 400个. 结果表明: 当SH<0时, 积雪消融停止;当SH>0时, 积雪消融开始;植被可以减缓积雪消融速率, 有植被的地方消融速率减慢, 反之则加快;不同植被消融速率大小顺序为草地>林缘>灌木林>乔木林;同一植被、不同坡向消融速率不同, 半阳坡云杉林＞半阴坡云杉林＞阴坡云杉林. 积雪含水率随气温升高而增大, 1月融化积雪占整个积雪的5%, 2月增大到28%, 大量积雪在3月消融, 占55%. 从坡位看, 下坡消融速率最大;在一个垂直带上, 低海拔消融速率大于高海拔. 温度是影响积雪消融的主要因子, 积雪消融速率随温度升高而增大, 反之则减小.     

亚洲中部干旱区在20世纪两次暖期的表现

利用亚洲中部干旱区1901-2002年近100 a气温及北半球海平面气压、冬季西伯利亚高压强度指数、西风指数资料,分析了20世纪全球变暖的两个较明显时期在该干旱区的响应特征,以及大气环流变化和太阳活动对干旱区气温异常的影响.结果表明:亚洲中部干旱区对20世纪全球发生的两次暖期的响应特征是有显著差异的.对1920-1940年代全球发生的第一次暖期,亚洲中部干旱区整体并没有响应,仅在其东部的季风影响边缘区有响应;而对1970年代以后发生的第二次暖期,亚洲中部干旱区整体都作出了响应.冰岛低压的异常加深、同时北大西洋亚速尔高压的显著增强,西伯利亚高压强度指数的异常减弱,以及西风指数的异常增强是导致亚洲中部干旱区气温偏高的可能原因,可以初步解释研究区整体对20世纪全球两次暖期响应不同的原因.太阳活动作为外部影响因子之一,对干旱区气温的影响是阶段性的,且在百年时间尺度上,二者并没有显著的相关性.     

东北多年冻土区埋地输油管道周围温度场特征非线性分析

为解决冻土区输油管道周围土壤的温度计算问题,根据考虑相变瞬态温度场的控制微分方程,应用Galerkin法推导出了二维温度场的有限元计算公式.以东北多年冻土区中俄原油管道工程为背景,根据该工程区的冻土条件和气候条件,应用该方法对温热型输油管道土壤温度场进行了计算预报与对比分析.结果表明:对于输送油温为15 ℃、直径为0.914 m以及管顶埋深为2.0 m的管道,在没有铺设保温材料情况下,管顶之上的土壤在管道运行的第1年就达到热平衡状态,同时土壤融化速率在第1年达到最大,随后4a时间里迅速减小,第5年后融化速率变化趋于稳定;管道运行一段时间后,管道周围的融化圈随冷暖季节的变化呈交替式的扩展;在管道运行30 a后,融深＞10 m,即管底下的融化层厚＞7 m,而在铺设5～8 cm的聚氨酯保温材料后,融深控制在3.08～3.88 m,即管底下融化层厚为0.2～1.0 m.因此,合理使用保温方法能有效防止冻土区管道冻害的发生,同时达到保护冻土环境的目的.     

中俄原油管道沿线典型土样冻胀性试验研究

中俄输油管道穿越约500 km的多年冻土区,管道沿途地形起伏,水系和沼泽发育,使得管道工程地质条件复杂.沿线地貌单元主要可分为沼泽湿地、阶地、河漫滩、坡地以及基岩山脊等5种,不同地貌单元的岩性和冻土赋存条件均不相同.选取各地貌单元的典型土样进行颗粒分析、冻胀率等试验,分析了土样冻胀率与天然含水率、干容重、粘粒含量之间的关系.结果表明:全-强风化花岗岩冻胀率最小,冻土工程地质条件最好;含有机质粉质粘土冻胀率最大,管基需要进行特殊处理;粘土和粉土冻胀率介于二者之间,对管基进行常规处理即可.该试验定量评价了中俄输油管道沿线不同地貌单元的冻胀性,为管道在确保工程长期稳定性的基础上,选择经济、环保的施工方式提供了试验依据.