Geodynamic modelling of the Century deposit,Mt Isa Province,Queensland

This paper is concerned with an example of quantitative modelling of orebody formation as a guide to reducing the risk for future mineral exploration. Specifically, the paper presents a detailed 3–D numerical model for the formation of the Century zinc deposit in northern Queensland. The model couples fluid flow with deformation, thermal transport and chemical reactions. The emphasis of the study is a systems approach where the holistic mineralising system is considered rather than concentrating solely on the mineral deposit. In so doing the complete plumbing system for mineralisation is considered with a view to specifying the critical conditions responsible for the ore deposit occurring where it does and having the size and metal grades that are observed. The numerical model is based on detailed geological, tectonic, isotopic and mineralogical data collected over the past 20 years. The conclusions are that the Century zinc deposit is located where it is because of the following factors: (i) a thermal anomaly is associated with the Termite Range Fault due to advection of heat from depth by fluid flow up the Termite Range Fault; (ii) bedding‐plane fissility in the shale rocks hosting the Century zinc deposit has controlled the wavelength and nature of D₁ folding in the vicinity of the deposit and has also controlled increases in permeability due to hydrofracture of the shales; such hydrofracture is also associated with the production of hydrocarbons as these shales passed through the ‘oil‐window’; (iii) Pb–Zn leached from crustal rocks in the stratigraphic column migrated up along faults normal to the Termite Range Fault driven by topographic relief associated with inversion at the end of the Isan Orogeny; these fluids mixed with H₂S derived at depth moving up the Termite Range Fault to mix with the crustal fluids to precipitate Pb–Zn in a plume downstream from the point of mixing. Critical factors to be used as exploration guides are high temperatures, carbonaceous fissile shales now folded into relatively tight D₁ folds, fault‐controlled plumbing systems that enable fluid mixing, depletion of metals upstream of the deposit and,in particular,a very wide Fe‐depletion halo upstream of the deposit.     

Spatial correlation of marine wind‐speed observations

Abstract

The spatial characteristics of the wind speeds from ships, drilling platforms, and satellites (SASS and SMMR) were investigated through autocorrelation analysis. Values of the spatial correlation coefficient in minimum separation classes revealed that SASS winds contained the least noise, followed by drilling‐platform and SMMR winds, measured ship winds and estimated ship winds. The variances explained by wind‐speed observations within a 100‐km radius of each other were found to be 86, 72, 62, 48 and 41%, respectively. Ship wind‐speed estimates made during hours of darkness showed significantly higher noise than daytime reports.     

Application of stress mapping in cross‐section to understanding ore geometry,predicting ore zones and development of drilling strategies

Stress mapping is a numerical modelling technique used to determine the distribution and relative magnitude of stress during deformation in a mineralised terrane. It is based on the general principle that fluid flow in the Earth's crust is primarily related to pressure gradients. It is best applied to epigenetic hydrothermal mineral deposits, where fluid flow and fluid flux are enhanced in dilational sections of structures and in sites of enhanced rock permeability due to high fracture density. These are defined by sites of low minimum principal stress (σ₃). Most stress mapping is carried out in two dimensions in plan view using geological maps. This is suitable for terranes with steeply dipping lithostratigraphy and structures in which the distribution of mineral deposits is largely controlled by fault structures portrayed on the maps. However, for terranes with gently dipping sequences and structures, and for situations where deposits are sited in and near the hinges of complex fold structures, stress mapping in cross‐section is preferable. The effectiveness of stress mapping is maximised if mineralisation was late in the evolutionary history of the host terrane, and hence the structural geometry of the terrane and contained deposits were essentially that expressed today. The orientation of syn‐mineralisation far‐field stresses must also be inferred. Two examples of orogenic gold deposits, which meet the above criteria, are used to illustrate the potential of stress mapping in cross‐section. Sunrise Dam, located in the Archaean Yilgarn Craton, is a lode‐gold deposit sited in a thrust‐fold belt. Stress mapping illustrates the heterogeneity of stress distribution in the complex structural geometry of the deposit, and predicts the preferential siting of ore zones around the intersections of more steeply dipping, linking thrusts and banded iron‐formation units, and below the controlling more gently dipping basal thrust, the Sunrise Shear. The Howley Anticline in the Pine Creek block hosts several Palaeoproterozoic gold deposits, sited in complex anticlinal structures in greywacke sequences. Stress mapping indicates that gold ores should develop in the hinge zones of symmetrical anticlines, in the hinge zones and more steeply dipping to overturned limbs of asymmetric anticlines, and in and around thrusts in both anticlines and parasitic synclines. The strong correlation between the predictions of the stress mapping, based on the distribution of low σ₃, and the location of gold ores emphasises the potential of stress mapping in cross‐section, not only as an exploration tool for the discovery of additional resources or deposits, but also as a test of geological models. Knowledge of the potential siting of gold ores and their probable orientations also provides a guide to drilling strategies in both mine‐ and regional‐scale exploration.     

The Congo Basin forests in a changing climate: Policy discourses on adaptation and mitigation (REDD+)

This paper discusses the discourses on climate change adaptation and mitigation that are currently at the forefront in the Congo Basin. On mitigation, the forests have enormous opportunities to contribute to the reducing emissions from deforestation and forest degradation (REDD+) mechanism. But the forest itself and its multiple dependent societies and sectors need to adapt to potential climate risks. Hence, actors are debating the design of climate change policy in the forest sector. Theoretically, we combine the agency-focus of frame analysis and discourse theory to analyze how different agents hold frames on climate change adaptation and mitigation policies in the region. This paper draws upon interviews with 103 different actors from government, international organizations, non-governmental organizations, research institutions and private sector in three countries: Cameroon, Central African Republic (CAR) and Democratic Republic of Congo (DRC). Three discourses were found on policy response to climate change in the forest sector: mitigation policy only, separated policy on adaptation and mitigation, and an integrated policy on adaptation and mitigation. The various frames articulated around each discourse by the coalitions include elements of: costs and benefits, scale of operation, effectiveness, financial resources and implementation mechanisms. Overall, the mitigation discourse, through its mix of actors, resources and interests seems to be stronger than the adaptation discourse. The paper finally outlines a number of implications of the discourses for policy design.     

Sensitivity of crop yields and land resource potential to climatic change in Ontario,Canada

Increasing concentrations of atmospheric CO₂ and other greenhouse gases are expected to contribute to a global warming. This paper examines the potential implications of a climatic change corresponding to a doubling of atmospheric concentrations of CO₂ on crop production opportunities throughout Ontario, a major food producing region in Canada. The climate is projected to become warmer and drier, but the extent of these shifts are expected to vary from region to region within Ontario. The effect of this altered climate on crop yields and the area of land capable of supporting specific crops varies according to region, soil quality and crop type. Most notable are the enhanced opportunities for grains and oilseeds in the northern regions, and the diminished production prospects for most crops in the most southerly parts of Ontario.     

Phase equilibrium and calorimetric study of the transition of MnTiO3 from the ilmenite to the lithium niobate structure and implications for the stability field of perovskite

The phase boundary between MnTiO₃ I (ilmenite structure) and MnTiO₃ II (lithium niobate structure) has been determined by analysis of quench products from reversal experiments in a cubic anvil apparatus at 1073–1673 K and 43–75 kbar using mixtures of MnTiO₃ I and II as starting materials. Tight brackets of the boundary give P(kbar)=121.2−0.045 T(K). Thermodynamic analysis of this boundary gives ΔH^o=5300±1000 J·mol⁻¹, ΔS^o = 1.98 ±1J·K⁻¹· mol⁻¹. The enthalpy of transformation obtained directly by transposed-temperature-drop calorimetry is 8359 ±2575 J·mol⁻¹. Possible topologies of the phase relations among the ilmenite, lithium niobate, and perovskite polymorphs are constrained using the above data and the observed (reversible with hysteresis) transformation of II to III at 298 K and 20–30 kbar (Ross et al. 1989). The observed II–III transition is likely to lie on a metastable extension of the II–III boundary into the ilmenite field. However the reversed I–II boundary, with its negative dP/ dT does represent stable equilibrium between ilmenite and lithium niobate, as opposed to the lithium niobate being a quench product of perovskite. We suggest a topology in which the perovskite occurs stably at low T and high P with a triple point (I, II, III) at or below 1073 K near 70 kbar. The I–II boundary would have a negative P-T slope while the II–III and I–III boundaries would be positive, implying that entropy decreases in the order lithium niobate, ilmenite, perovskite. The inferred positive slope of the ilmenite-perovskite transition in MnTiO₃ is different from the negative slopes in silicates and germanates. These thermochemical parameters are discussed in terms of crystal structure and lattice vibrations.     

Observations of longitudinal roll vortices during arctic cold air outbreaks over open water

An evolving convective Arctic planetary boundary layer (PBL) containing longitudinal roll vortices (rolls) was observed with aircraft data during the 1983 Marginal Ice Zone Experiment and the 1984 Arctic Cyclone Experiment.The PBL is observed to grow rapidly as the very cold and dry air flows off the ice over the relatively warm water. There is very large sensible heat flux, a result of the large surface-air temperature differences. Coherent structures were identified in these PBL's by use of power, coherence squared and phase spectra of the data. A systematic method of separating the rolls from organized thermal plumes was devised, based on theoretical characteristics for roll circulations and the resulting modified mean wind profile. The rapid mixing by the rolls aids in the establishment of equilibrium and an observed adiabatic modified mean Ekman layer. Rolls that form in a thermally neutral atmosphere over ice have different characteristics than those that appear in the unstable stratification over water. The rolls become increasingly more convective in character with distance from the ice edge. They have aspect ratios (wavelength/PBL height) that decrease with distance from the ice edge in agreement with linear theory. This is in contrast to the cloud street wavelength to inversion height ratio which is observed to increase downwind from the ice edge.     

Dissolved oxygen variations in alpine glacial meltwaters

Recent models of chemical weathering in alpine glacial meltwaters suggest that sulphide oxidation is a major source of solute in the distributed component of the subglacial hydrological system. This reaction requires O₂, and may lower dissolved oxygen levels to below saturation with respect to the atmosphere. This should result in an inverse association between SO₇^2- and dissolved oxygen saturation. However, measurements of O₂ saturation in bulk meltwaters draining the Haut Glacier d'Arolla, Switzerland, show that there is a positive association between SO₄^2- and O₂ saturation. The O₂ content of glacial meltwaters depends on the initial content of snow and icemelt, which may be controlled by the rate of melting, and the kinetic balance between O₂ losses (e.g. sulphide oxidation, microbial respiration) and gains (e.g. diffusion of O₂ into solution).