The radio frequency dielectric properties of the stratified UG1–UG2 geological unit in the Bushveld Complex

A new measurement technique enables the complex dielectric properties of the geological strata comprising the UG1–UG2 (Upper Group 1–Upper Group 2) unit of the Bushveld Complex in South Africa to be determined with unprecedented detail at radio frequencies (RF). Results of non-destructive laboratory measurements of representative diamond drill core samples from the UG1–UG2 unit are presented at 25 MHz. These data establish that the UG1 and UG2 chromitite layers are embedded in rock strata (norite, pyroxenite and anorthosite) which are translucent in the HF spectral band, whereas the chromitite layers themselves exhibit significant velocity contrast, making them good radar reflectors. The data presented here is useful for calibration of the radar system, and for predicting the range and resolution performance of borehole radars operating in both the hanging and footwalls of the economically important platiniferous UG2 reef.     

Simulated effect of a forest road on near‐surface hydrologic response: redux

In the work reported here the comprehensive physics‐based Integrated Hydrology Model (InHM) was employed to conduct both three‐ and two‐dimensional (3D and 2D) hydrologic‐response simulations for the small upland catchment known as C3 (located within the H. J. Andrews Experimental Forest in Oregon). Results from the 3D simulations for the steep unchannelled C3 (i) identify subsurface stormflow as the dominant hydrologic‐response mechanism and (ii) show the effect of the down‐gradient forest road on both the surface and subsurface flow systems. Comparison of the 3D results with the 2D results clearly illustrates the importance of convergent subsurface flow (e.g. greater pore‐water pressures in the hollow of the catchment for the 3D scenario). A simple infinite‐slope model, driven by subsurface pore‐water pressures generated from the 3D and 2D hydrologic‐response simulations, was employed to estimate slope stability along the long‐profile of the C3 hollow axis. As expected, the likelihood of slope failure is underestimated for the lower pore pressures from the 2D hydrologic‐response simulation compared, in a relative sense, to the higher pore pressures from the 3D hydrologic response simulation. The effort reported herein provides a firm quantitative foundation for generalizing the effects that forest roads can have on near‐surface hydrologic response and slope stability at the catchment scale. Copyright © 2006 John Wiley & Sons, Ltd.     

A Simple Temporal and Spatial Analysis of Flow in Complex Terrain in the Context of Wind Energy Modelling

A simple temporal and spatial analysisis done on wind speed and direction data from a number ofmeteorological towers separated by distances between roughly 1 and 100 kilometres. The analysis is done in the context of expected model error in wind energy calculations. The study first uses single point statistics to show the evolution of mean values with time. It is shown that strong seasonal signals are present and that stable means are achieved only after averaging periods of a year or more. The study then uses discrete Fourier transforms to show that significant amounts of spectral energy reside in modes with periods of a few days to less than a day. Frequency dependent cross correlation values are then derived and used to show how correlation between towers diminishes with increasing frequency. The mechanism responsible for this diminished correlation is shown through the comparison of cross-correlation phase as a function of frequency and its relationship to distance between towers. Error in wind energy estimates are shown to be strongly related to correlation and therefore distance over which the prediction is made. In summary, much of the inaccuracy in modelling flow in the context of wind energy calculations is due to a lack of scale separation between the deterministic part of the flow, which is well modelled, and that part of the flow that is stochastic at the length and time scales modelled.     

Implications of model uncertainty for the mapping of hillslope‐scale soil erosion predictions

An integrated modelling approach (MIRSED) which utilizes the process‐based soil erosion model WEPP (Water Erosion Prediction Project) is presented for the assessment of hillslope‐scale soil erosion at five sites throughout England and Wales. The methodology draws upon previous uncertainty analysis of the WEPP hillslope soil erosion model by the authors to qualify model results within an uncertainty framework. A method for incorporating model uncertainty from a range of sources is discussed as a first step towards using and learning from results produced through the GLUE (Generalized Likelihood Uncertainty Estimation) technique. Results are presented and compared to available observed data, which illustrate that levels of uncertainty are significant and must be taken into account if a meaningful understanding of output from models such as WEPP is to be achieved. Furthermore, the collection of quality, observed data is underlined for two reasons: as an essential tool in the development of soil erosion modelling and also to allow further constraint of model uncertainty. Copyright © 2001 John Wiley & Sons, Ltd.     

Phosphorus oxynitride PON, a silica analogue: structure and compression of the cristobalite-like phase; P –T phase diagram

 The structure of the cristobalite-like polymorph of phosphorus oxynitride PON has been refined using neutron powder diffraction data. It is tetragonal, space group I&4macr;2d, Z=4. The four P–(O,N) distances are equal but the tetrahedron is compressed along c. In AX₂ or ABX₄ compounds, the tetragonal I&4macr;2d or I&4macr; structure is obtained when the average ratio of the cation to anion radius is below 1.186, whereas the tetragonal P4₁2₁2 or orthorhombic C222₁ structure is obtained at low temperatures for larger ratios. The cell parameters of this PON polymorph have been determined as a function of hydrostatic pressure by in situ angle dispersive X-ray powder diffraction in a diamond-anvil cell. Under truly hydrostatic pressure, a strong anisotropic behavior is observed with the c parameter being nearly incompressible. Very slight anisotropic stress strongly modifies the high-pressure behavior. According to the pressure-temperature conditions of treatment, three phases, cristobalite-, moganite-, and quartz-like, have been obtained by quenching experiments, and the P–T phase diagram of PON was derived. The high-pressure behavior of the α-quartz, moganite, and cristobalite-like polymorphs of PON and SiO₂ is discussed. Received: 7 August 2000 / Accepted: 21 January 2001     

Geochemistry of waters in the Valley of Ten Thousand Smokes region, Alaska

Meteoric waters from cold springs and streams outside of the 1912 eruptive deposits filling the Valley of Ten Thousand Smokes (VTTS) and in the upper parts of the two major rivers draining the 1912 deposits have similar chemical trends. Thermal springs issue in the mid-valley area along a 300-m lateral section of ash-flow tuff, and range in temperature from 21 to 29.8°C in early summer and from 15 to 17°C in mid-summer. Concentrations of major and minor chemical constituents in the thermal waters are nearly identical regardless of temperature. Waters in the downvalley parts of the rivers draining the 1912 deposits are mainly mixtures of cold meteoric waters and thermal waters of which the mid-valley thermal spring waters are representative. The weathering reactions of cold waters with the 1912 deposits appear to have stabilized and add only subordinate amounts of chemical constituents to the rivers relative to those contributed by the thermal waters. Isotopic data indicate that the mid-valley thermal spring waters are meteoric, but data is inconclusive regarding the heat source. The thermal waters could be either from a shallow part of a hydrothermal system beneath the 1912 vent region or from an incompletely cooled, welded tuff lens deep in the 1912 ash-flow sheet of the upper River Lethe area.Bicarbonate-sulfate waters resulting from interaction of near-surface waters and the cooling 1953–1968 southwest Trident plug issue from thermal springs south of Katmai Pass and near Mageik Creek, although the Mageik Creek spring waters are from a well-established, more deeply circulating hydrothermal system. Katmai caldera lake waters are a result of acid gases from vigorous drowned fumaroles dissolving in lake waters composed of snowmelt and precipitation.     

Mineralogy,petrology, and chemistry of a Luna 16 basaltic fragment,sample B-1

Luna 16 sample B-1 was the largest fragment (62 mg) obtained in the sample exchange with the USSR. Petrologic, mineralogic, and chemical investigations have been made on this fragment in conjunction with Rb-Sr and⁴⁰Ar/³⁹Ar investigations by our colleagues. Sample B-1 is a fine-grained ophitic basalt but is distinguished from the Apollo samples by containing a single pyroxene, predominantly pigeonitic, an ilmenite content (7%) intermediate to that of the Apollo 11 and 12 samples, and subequal amounts of pyroxene (50%) and plagioclase (40%). Chemically it is distinguished by a high Sr content (437 ppm) and a high K/U value (4700). The K-content (1396 ppm) is higher than that of Luna 16 soil sample A-2.