四川汶川MS 8.0大地震地表破裂带的遥感影像解析

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川MS 8.0级大地震造成巨大的人员伤亡和财产损失,并形成了空间上基本连续分布的地表破裂带（地震断层）。根据地表破裂带的解译标志及影像特征,我们充分利用震后中国科学院航空遥感飞机所获取的高分辨率航空遥感图像以及我国台湾福卫-2卫星遥感图像进行详细解译分析,并结合震后的多次野外科学考察与验证,初步查明了四川汶川MS 8.0级大地震所产生地表破裂带的空间分布特征。遥感解译分析表明汶川大地震产生的地表破裂带总计长约300 km,其几何学特征十分复杂,主要沿先存的NE走向活动断裂带呈不连续展布;变形特征以逆冲挤压为主兼具右旋走滑分量。按同震地表破裂带所在断裂带位置,可将其分为两条： 中央地表破裂带：沿映秀-北川断裂带分布,从西南开始呈北东向延伸至平武县水观乡石坎子北东一带,长约230 km,最大垂直位移量达6.0 m左右,最大右旋水平位移达5.8 m;山前地表破裂带：沿灌县-安县断裂带分布,由都江堰市向峨乡一带开始呈北东向延伸至安县雎水镇一带,长约70 km,以逆冲挤压为主,最大垂直位移量可达2.5 m。此外,遥感图像分析还表明上述地表破裂带与地质灾害分布在空间上具有十分密切的相关性,因此,挤压逆冲-走滑型地震断层的致灾效应研究是未来应该加以重视的研究课题。     

汶川大地震（MS 8.0）同震变形作用及其与地质灾害的关系

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川大地震（MS 8.0）波及半个亚洲,震撼整个中国。本文通过地震后的实地调查,对发育在龙门山断裂带上的同震地表破裂带的分布、产状、继承性复活与变形特征,以及同震变形与地震地质灾害的关系等进行了初步总结,分析表明这次汶川大地震(MS 8.0)沿北川-映秀逆冲断裂和安县-灌县逆冲断裂同时发生地表破裂,前者产生以高角度逆冲兼右旋走滑为特征的地表破裂带长约275 km,后者产生以缓倾角逆冲作用为特征的地表破裂带长约80 km。汶川大地震的同震地表破裂带分布具有分段性特征,并与地表破坏程度的分带性有着一定的内在联系,详细研究表明,同震地表破裂带的产状直接影响地表破坏程度和地震地质灾害的强度,汶川大地震（MS 8.0）沿呈高角度陡倾的北川-映秀逆冲断裂发育的同震地表变形所产生的地表破坏程度和地震地质灾害的强度比沿缓倾角的安县-灌县逆冲断裂要强。从各种类型的地震断裂来看,具有垂直运动的逆冲型地震断裂所造成的地表破坏程度和地质灾害强度比具水平运动的走滑型地震断裂要强。因此,汶川大地震发生的破裂过程和同震地表变形与地震地质灾害的关系值得深入研究。     

An experimental study of the grain-scale processes of peridotite melting: implications for major and trace element distribution during equilibrium and disequilibrium melting

The grain-scale processes of peridotite melting were examined at 1,340°C and 1.5 GPa using reaction couples formed by juxtaposing pre-synthesized clinopyroxenite against pre-synthesized orthopyroxenite or harzburgite in graphite and platinum-lined molybdenum capsules. Reaction between the clinopyroxene and orthopyroxene-rich aggregates produces a melt-enriched, orthopyroxene-free, olivine + clinopyroxene reactive boundary layer. Major and trace element abundance in clinopyroxene vary systematically across the reactive boundary layer with compositional trends similar to the published clinopyroxene core-to-rim compositional variations in the bulk lherzolite partial melting studies conducted at similar P–T conditions. The growth of the reactive boundary layer takes place at the expense of the orthopyroxenite or harzburgite and is consistent with grain-scale processes that involve dissolution, precipitation, reprecipitation, and diffusive exchange between the interstitial melt and surrounding crystals. An important consequence of dissolution–reprecipitation during crystal-melt interaction is the dramatic decrease in diffusive reequilibration time between coexisting minerals and melt. This effect is especially important for high charged, slow diffusing cations during peridotite melting and melt-rock reaction. Apparent clinopyroxene-melt partition coefficients for REE, Sr, Y, Ti, and Zr, measured from reprecipitated clinopyroxene and coexisting melt in the reactive boundary layer, approach their equilibrium values reported in the literature. Disequilibrium melting models based on volume diffusion in solid limited mechanism are likely to significantly underestimate the rates at which major and trace elements in residual minerals reequilibrate with their surrounding melt. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Simple models for dynamic melting in an upwelling heterogeneous mantle column: Analytical solutions

Several lines of evidence suggest that the melt generation and segregation regions of the mantle are heterogeneous, consisting of chemically and lithologically distinct domains of variable size and dimension. Partial melting of such heterogeneous mantle source regions gives rise to a diverse range of basaltic magmas. In order to better assess the role of source heterogeneity during mantle melting, we have undertaken a theoretical study of trace element distribution and fractionation during concurrent melting and melt migration in an upwelling, chemically heterogeneous, two-porosity double lithology melting column. Analytical solutions for the abundance of a trace element in the matrix and channel were obtained under the assumptions that the porosity, melt and solid velocities, and solid-melt partition coefficients are constant and uniform. For simplicity, we neglected diffusion and dispersion in the melt. Chemical source heterogeneities of arbitrary size and shape were integrated into the simple melting models by allowing trace element abundance in the source region to vary as a function of time and space. Concurrent melting and melt migration in an upwelling heterogeneous mantle may be approximated as a quasi-steady state problem in which time-dependent concentration patterns produced by melting of heterogeneous source regions are superimposed on a reference steady-state concentration distribution established by melting of the ambient or background mantle. Chromatographic fractionation is especially important for the matrix melt and solid when chemical heterogeneities are involved during melting and melt migration in the mantle, giving rise to significant phase-shift between two incompatible trace elements in the matrix melt and scattered correlations among incompatible trace elements in residual peridotites. Mixing is the chief mass transfer process in the dunite channel where the chromatographic effect is negligible for most of the incompatible trace elements. The lack of chromatographic fractionation among incompatible trace elements and isotopic ratios in MORB suggests either most MORB are channel melts or mixing in magma conduit and chamber is very efficient such that the phase-shift is averaged out during magma transport and storage processes. Advection brings melt produced by smaller-degree of melting in the deeper part of the melting column to the overlying melting region, increasing the incompatible trace element abundance in the matrix and the channel. This advection-induced self-enrichment is especially important when heterogeneous sources are involved and may account for some of the enriched incompatible trace element patterns observed in residual peridotite that were previously interpreted to be a result of mantle metasomatism. Systematic studies of high-resolution spatially correlated mantle samples may help to constrain the melting history and the size and nature of chemical heterogeneities in the mantle.     

Considerations for conducting incubations to study the mechanisms of As release in reducing groundwater aquifers

Microbial Fe reduction is widely believed to be the primary mechanism of As release from aquifer sands in Bangladesh, but alternative explanations have been proposed. Long-term incubation studies using natural aquifer material are one way to address such divergent views. This study addresses two issues related to this approach: (1) the need for suitable abiotic controls and (2) the spatial variability of the composition of aquifer sands. Four sterilization techniques were examined using orange-colored Pleistocene sediment from Bangladesh and artificial groundwater over 8 months. Acetate (10 mM) was added to sacrificial vials before sterilization using either (1) 25 kGy of gamma irradiation, (2) three 1-h autoclave cycles, (3) a single addition of an antibiotic mixture at 1× or (4) 10× the typical dose, and (5) a 10 mM addition of azide. The effectiveness of sterilization was evaluated using two indicators of microbial Fe reduction, changes in diffuse spectral reflectance and leachable Fe(II)/Fe ratios, as well as changes in P-extractable As concentrations in the solid phase. A low dose of antibiotics was ineffective after 70 days, whereas autoclaving significantly altered groundwater composition. Gamma irradiation, a high dose of antibiotics, and azide were effective for the duration of the experiment.     

西藏马攸木金矿床金银互化物的赋存状态

马攸木金矿床是西藏近年发现的首例规模较大、矿石品位富、金成色高的岩金矿床.作者通过对马攸木金矿床矿石组构、矿石共生组合及矿物特征研究发现,金银互化物主要有自然金、含银自然金、银金矿、自然银.载金矿物为黝铜矿、针铁矿、脆硫锑铅矿及石英;金银互化物的赋存形式主要为包裹体金、裂隙金及粒间金.金银互化物的形成、富集与热液成矿作用及表生风化作用关系密切.     

喜马拉雅山脉的地质地貌特征:来自SRTM数字高程模型和降水量数据的约束

利用GTOPO30和SRTM3数字高程(DEM)数据,提取了喜马拉雅山脉(造山带)的数字高程模型并对其进行了地质地貌的初步分析。从SRTM3数字高程数据提取出坡度数据,初步分析了喜马拉雅山脉坡度和高程的特征。数字高程和坡度图清楚地展现了喜马拉雅大型断裂带(构造边界)的空间分布特征。分析了中国气象局下属的西藏、青海、四川和云南4省区气象观测台站55年来的年平均降水量观测数据、喜马拉雅山脉南坡的年平均降水量数据、喜马拉雅DEM和裂变径迹数据,发现喜马拉雅山脉从东至西,年平均降水量逐渐减少,地形起伏逐渐变小,而高程渐次升高,与此同时剥蚀速率降低;从北至南,年平均降水量逐渐增加,地形起伏增大,高程快速降低,而剥蚀速率则急剧升高。这充分说明了喜马拉雅年平均降水量大的地区,地表剥蚀作用相对较强,年平均降水量小的地区,地表剥蚀作用则较弱,即:在喜马拉雅地区,长周期的地表剥蚀过程(可长达数个百万年时间尺度)和短周期(仅仅50年)的降水量观测是耦合的。     

树木年轮重建阿勒泰西部1481-2004年6-9月降水量序列

根据采自阿勒泰西部地区5个采点的树木年轮样本, 建立了该地区的树轮年表. 通过相关普查发现, 其差值年表序列与该地区当年6-9月的降水量存在明显的负相关关系, 且具有明确的树木生理学意义. 用沙勒哈(t, t 1)两个树轮差值年表序列可较好地重建该地区1481-2004年524 a来的当年6-9月的降水量, 且经过交叉检验表明重建方程稳定可靠. 分析发现, 阿勒泰西部地区524 a来的重建降水量序列具有9个偏干阶段和9个偏湿阶段, 并且具有34.8 a、 5.0～5.1 a、 4.3～4.4 a、 3.9～4.0 a、 3.7 a和3.4 a的显著干湿变化准周期. 重建降水量序列在1518年、 1548年、 1634年、 1765年、 1856年前后发生过突变.     

阿勒泰地区降水量、可降水量及降水转化率分析

根据1961-2007年47 a阿勒泰地区7个地面站每日4个频次的水汽压和日降水量资料, 分析了阿勒泰地区降水量的变化. 结果表明: 过去47 a阿勒泰地区年降水有增多趋势, 夏、冬季节降水呈明显增加趋势, 而春、秋季则增加较缓慢;降水空间分布表现为自南向北递增, 自西向东递减. 运用整层大气可降水量的经验计算公式, 计算了阿勒泰地区大气可降水量和降水转化率. 结果得出: 阿勒泰地区可降水量时间分布为夏季多、 冬季少;空间分布表现为自山区外围向山区中心递增, 降水量的大值区与可降水量的小值区对应. 降水转化率的时空分布说明这47 a其呈递增趋势, 且冬季较高. 研究结果表明, 阿勒泰地区具有一定的增水潜力.     

三肇凹陷青山口组源岩生成油向下“倒灌”运移层位及其研究意义

为了研究三肇凹陷青山口组源岩生成的油向下“倒灌”运移层位,对油向下“倒灌”运移机制及条件进行了研究,得到三肇凹陷扶杨油层同时具备①青山口组源岩目前应具有足够大的超压;②存在连通青山口组源岩和扶杨油层的T2断裂2个条件,青山口组源岩生成的油能够在超压的作用下在嫩江组沉积末期、明水组沉积末期和古近系沉积末期通过T2断裂向下伏扶杨油层中“倒灌”运移。利用压力封闭原理,对三肇凹陷青山口组源岩生成的油向下“倒灌”运移距离进行了研究,得到三肇凹陷青山口组源岩生成的油向下“倒灌”运移距离一般大于500 m,而三肇凹陷扶杨油层地层厚度最大只有500 m,表明三肇凹陷青山口组源岩生成的油可以向下“倒灌”运移至整个扶杨油层的任何部位。目前三肇凹陷扶杨油层从上至下均含油,且已找到的油藏均分布于青山口组源岩生成的油能够向下“倒灌”运移分布范围内或附近,这表明青山口组源岩生成的油向下“倒灌”运移层位控制着油气富集层位,青山口组源岩生成的油向下“倒灌”运移分布范围控制着三肇凹陷扶杨油层油藏形成与分布范围。青山口组源岩生成的油向下“倒灌”运移分布范围及其附近应是三肇凹陷扶杨油层油下一步勘探的有利地区。