Petrogenesis of orthopyroxene- and amphibole-bearing andesites, Mustique, Grenadine Islands, Lesser Antilles Arc: Isotope, trace element and physical constraints

Abstract On the island of Mustique, fresh and propylitized olivine–plagioclase–clinopyroxene basalt, plagioclase–clinopyroxene–orthopyroxene and plagioclase–clinopyroxene–amphibole andesite lavas and minor intrusions are interbedded with Oligocene pyroclastic and epiclastic rocks. Chemical data show that two isotopically identical, but chemically different, suites of lava are present: (i) the OPXS (⁸⁷Sr/⁸⁶Sr 0.70403–0.70454; ¹⁴³Nd/¹⁴⁴Nd 0.512952–0.512986; δ¹⁸O_cpx 5.49 and 5.61), comprising basalts and orthopyroxene‐bearing andesites; and (ii) the AMPHS (⁸⁷Sr/⁸⁶Sr 0.70401–0.70457; ¹⁴³Nd/¹⁴⁴Nd 0.512981–0.513037; δ¹⁸O_cpx 5.54), made up of basalts and amphibole‐bearing andesites. The OPXS has higher contents of TiO₂, P₂O₅, light rare earth elements, Sm, Pb, Th, U, Zr, Y and Nb, and higher La/Yb ratios than the AMPHS. The isotopic data suggest that both suites formed from melts derived from the same subduction‐modified depleted mantle source as the volcanic rocks of nearby St Vincent and Bequia, and the northern islands of the Lesser Antilles Arc. The immobile trace element contents, and La/Yb ratios, of the OPXS are indicative of ～10% partial melting of the source, whereas those of the AMPHS are indicative of ～25% partial melting. The within‐suite chemical variation of the OPXS is consistent with ～45% fractional crystallization of its intratelluric mineral assemblages, and that of the AMPHS is consistent with the removal of ～65% of its intratelluric assemblages. Experimental evidence suggests that both suites of basalt crystallized at pressures <8 kbar from melts containing 1–2 wt% water. After extensive fractional crystallization, the andesites crystallized at pressures between approximately 5 and 2 kbar. The OPXS magmas appear to have lost more of their water content than the AMPHS magmas. Thus, the OPXS andesites formed from melts with an estimated water content of 2–3 wt%, whereas the AMPHS andesites formed from melts containing at least 4.5 wt% water.     

Revolution or evolution? New Zealand agriculture since 1984

Agriculture was the primary target of moves to deregulate the New Zealand economy in 1984. Within twelve-months all production subsidies had been removed, including those for fertiliser and other inputs, as well as funding for drought relief, floods and other natural weather disasters. Whereas at the start of 1984, subsidies were estimated to represent as much as 33% of farm income, by 2003 this had fallen to less than 2% with most of this spent on agricultural research. The anticipated shift of thousands of people off the land did not appear to occur, and by conventional measures at least New Zealand agriculture in 2003 is a major success story. At the core of the changes imposed on agriculture was a commitment to remove all state or government distortions from the system and to fully expose the agricultural sector to market forces. This included wide-ranging and fundamental changes in the broad institutional context within which agriculture must operate. All this was achieved at great social cost and with a significant impact on the environment. In many respects New Zealand agriculture is now very different from that in 1984. Some sectors, such as dairying, have grown and become increasingly industrialised. On the other hand, sheep farming, particularly for wool has struggled to maintain its market share, while other enterprises have emerged as significant sources of income, including horticulture, viticulture and fruit. It is argued here that the trends evident in New Zealand agriculture since 1984 pre-existed the reform period and that the apparent success of the reforms evident at a national scale have not addressed or removed the fundamental problems which face New Zealand agriculture, just as they do modern agricultural systems elsewhere. This revised version was published online in July 2006 with corrections to the Cover Date.     

A new Geologic Time Scale, with special reference to Precambrian and Neogene

A Geologic Time Scale (GTS2004) is presented that integrates currently available stratigraphic and geochronologic information. Key features of the new scale are outlined, how it was constructed, and how it can be further improved. The accompanying International Stratigraphic Chart, issued under auspices of the International Commission on Stratigraphy (ICS), shows the current chronostratigraphic scale and ages with estimates of uncertainty for all stage boundaries. Special reference is made to the Precambrian part of the time scale, which is coming of age in terms of detail, and to the Neogene portion, which has attained an ultra-high-precision absolute-age calibration.     

Kimberlite metasomatism at Murowa and Sese pipes, Zimbabwe

Metasomatism accompanying kimberlite emplacement is a worldwide phenomenon, although infrequently described or recognised. At the Cambrian-aged Murowa and Sese kimberlite clusters located within the Archean Zimbabwe Craton just north of the boundary with the Limpopo Mobile Zone in southern central Zimbabwe, the metasomatism is intense and well exposed and the processes can be readily studied. Dykes, sills and the root zones of pipes are exposed at the current erosion level. Kimberlite lithologies present are hypabyssal macrocrystic kimberlite (“HMK”), HMK breccia, and tuffisitic kimberlite breccia (“TKB”) including minor lithic tuffisitic kimberlite breccia (“LTKB”). Country rocks are 2.6 Ga Chibi and Zimbabwe granite batholiths emplaced into 2.6–2.9 Ga or earlier Archean tonalitic gneiss and greenstones. During initial metasomatism, the granites become spotted with green chlorite, needles of alkaline amphiboles (winchite, riebeckite, arfvedsonite) and pyroxenes (aegirine–augite) with minor carbonate and felts of talc. Oligoclase feldspar becomes converted to albite, extensively altered, dusted and reddened with hematite, whereas K-feldspar remains unaffected. The granites become converted to syenite through removal of quartz. More intense metasomatism at Murowa and Sese results in veins of green metasomatite which cut and disrupt the granite. Progressive disruption entrains granite blocks, breaking down the granite still further, spalling off needle-like granite slivers, and so giving rise to LTKB. This process of disruption and entrainment appears to be the manner of initial development of the pipe structure. The chemistry of the metasomatite is intermediate between granite and kimberlite. Compared to granite country rock it has markedly higher Mg, Cr, Ni, CO₂ and H₂O+, higher Ca, Mn, Nb, Sr, P, Fe³⁺/Fe²⁺ ratio, U, Co, and Cu, approximately equal TiO₂, K₂O, Na₂O, La, Ta, Rb, Zr, Zn and resultant lower SiO₂, Al₂O₃, Ga and Y. The metasomatite Na₂O/K₂O ratio is slightly higher than that of the granite. The metasomatic process is broadly analogous to fenitisation of granitic wall rock accompanying carbonatite complex emplacement. The metasomatism at Murowa and Sese was caused by fluids from the rising but confined proto-kimberlite melt penetrating into cracks and matrix of granite country rock and reacting with it. These fluids were CO₂-rich, hydrous, oxidising, enhanced in ultramafic elements and carried low levels of Na.     

Geology of the Victor Kimberlite, Attawapiskat, Northern Ontario, Canada: cross-cutting and nested craters

The pipe shapes, infill and emplacement processes of the Attawapiskat kimberlites, including Victor, contrast with most of the southern African kimberlite pipes. The Attawapiskat kimberlite pipes are formed by an overall two-stage process of (1) pipe excavation without the development of a diatreme (sensu stricto) and (2) subsequent pipe infilling. The Victor kimberlite comprises two adjacent but separate pipes, Victor South and Victor North. The pipes are infilled with two contrasting textural types of kimberlite: pyroclastic and hypabyssal-like kimberlite. Victor South and much of Victor North are composed of pyroclastic spinel carbonate kimberlites, the main features of which are similar: clast-supported, discrete macrocrystal and phenocrystal olivine grains, pyroclastic juvenile lapilli, mantle-derived xenocrysts and minor country rock xenoliths are set in serpentine and carbonate matrices. These partly bedded, juvenile lapilli-bearing olivine tuffs appear to have been formed by subaerial fire-fountaining airfall processes.

The Victor South pipe has a simple bowl-like shape that flares from just below the basal sandstone of the sediments that overlie the basement. The sandstone is a known aquifer, suggesting that the crater excavation process was possibly phreatomagmatic. In contrast, the pipe shape and internal geology of Victor North are more complex. The northwestern part of the pipe is dominated by dark competent rocks, which resemble fresh hypabyssal kimberlite, but have unusual textures and are closely associated with pyroclastic juvenile lapilli tuffs and country rock breccias±volcaniclastic kimberlite. Current evidence suggests that the hypabyssal-like kimberlite is, in fact, not intrusive and that the northwestern part of Victor North represents an early-formed crater infilled with contrasting extrusive kimberlites and associated breccias. The remaining, main part of Victor North consists of two macroscopically similar, but petrographically distinct, pyroclastic kimberlites that have contrasting macrodiamond sample grades. The juvenile lapilli of each pyroclastic kimberlite can be distinguished only microscopically. The nature and relative modal proportion of primary olivine phenocrysts in the juvenile lapilli are different, indicating that they derive from different magma pulses, or phases of kimberlite, and thus represent separate eruptions. The initial excavation of a crater cross-cutting the earlier northwestern crater was followed by emplacement of phase (i), a low-grade olivine phenocryst-rich pyroclastic kimberlite, and the subsequent eruption of phase (ii), a high-grade olivine phenocryst-poor pyroclastic kimberlite, as two separate vents nested within the original phase (i) crater. The second eruption was accompanied by the formation of an intermediate mixed zone with moderate grade. Thus, the final pyroclastic pipe infill of the main part of the Victor North pipe appears to consist of at least three geological/macrodiamond grade zones.

In conclusion, the Victor kimberlite was formed by several eruptive events resulting in adjacent and cross-cutting craters that were infilled with either pyroclastic kimberlite or hypabyssal-like kimberlite, which is now interpreted to be of probable extrusive origin. Within the pyroclastic kimberlites of Victor North, there are two nested vents, a feature seldom documented in kimberlites elsewhere. This study highlights the meaningful role of kimberlite petrography in the evaluation of diamond deposits and provides further insight into kimberlite emplacement and volcanism.     

Transtensional deformation in the Lake Tahoe region, California and Nevada, USA

Dextral transtensional deformation is occurring along the Sierra Nevada–Great Basin boundary zone (SNGBBZ) at the eastern edge of the Sierra Nevada microplate. In the Lake Tahoe region of the SNGBBZ, transtension is partitioned spatially and temporally into domains of north–south striking normal faults and transitional domains with conjugate strike-slip faults. The normal fault domains, which have had large Holocene earthquakes but account only for background seismicity in the historic period, primarily accommodate east–west extension, while the transitional domains, which have had moderate Holocene and historic earthquakes and are currently seismically active, primarily record north–south shortening. Through partitioned slip, the upper crust in this region undergoes overall constrictional strain.Major fault zones within the Lake Tahoe basin include two normal fault zones: the northwest-trending Tahoe–Sierra frontal fault zone (TSFFZ) and the north-trending West Tahoe–Dollar Point fault zone. Most faults in these zones show eastside down displacements. Both of these fault zones show evidence of Holocene earthquakes but are relatively quiet seismically through the historic record. The northeast-trending North Tahoe–Incline Village fault zone is a major normal to sinistral-oblique fault zone. This fault zone shows evidence for large Holocene earthquakes and based on the historic record is seismically active at the microearthquake level. The zone forms the boundary between the Lake Tahoe normal fault domain to the south and the Truckee transition zone to the north.Several lines of evidence, including both geology and historic seismicity, indicate that the seismically active Truckee and Gardnerville transition zones, north and southeast of Lake Tahoe basin, respectively, are undergoing north–south shortening. In addition, the central Carson Range, a major north-trending range block between two large normal fault zones, shows internal fault patterns that suggest the range is undergoing north–south shortening in addition to east–west extension.A model capable of explaining the spatial and temporal partitioning of slip suggests that seismic behavior in the region alternates between two modes, one mode characterized by an east–west minimum principal stress and a north–south maximum principal stress as at present. In this mode, seismicity and small-scale faulting reflecting north–south shortening concentrate in mechanically weak transition zones with primarily strike-slip faulting in relatively small-magnitude events, and domains with major normal faults are relatively quiet. A second mode occurs after sufficient north–south shortening reduces the north–south S_hmax in magnitude until it is less than S_v, at which point S_v becomes the maximum principal stress. This second mode is then characterized by large earthquakes on major normal faults in the large normal fault domains, which dominate the overall moment release in the region, producing significant east–west extension.     

Effects of peat on the shapes of alluvial channels: examples from the Cumberland Marshes, Saskatchewan, Canada

An avulsion of the lower Saskatchewan River in the 1870s inundated a large segment of peat-covered floodplain that subsequently has become aggraded with a broad (500 km²) belt of alluvium deposited by the redirected flow. Routing of water and sediment discharge through the avulsion-affected area has been accomplished mainly by networks of sandy bedded anastomosed channels that have formed, evolved, and abandoned as the alluvial belt prograded down the floodplain slope. These processes continue today, though at a much-reduced rate. New channels, formed by crevassing and basinward extension of distributaries, are initially small and shallow, with bottom elevations situated within the avulsive alluvium but above the pre-avulsion peat (floodplain) surface. Subsequent enlargement and downcutting of many of these channels eventually uncovers the underlying peat layer whose resistance to erosion exerts significant influence on cross-sectional shape and further channel development. Peat-floored channels tend to have rectangular cross-sections, high ratios of average to maximum depth (D/D_max), and a large range of width-to-depth ratios. If the channel continues to enlarge, the peat layer eventually becomes breached, commonly leading to temporarily irregular cross-sections caused by localized scouring at the breach sites. Eventually, the peat layer is completely eroded from the channel floor by undercutting and slumping, after which channel shape becomes governed mainly by other perimeter characteristics. Channels unaffected by peat, either before the peat layer is encountered during early channel development or after it is entirely removed, tend to have low width/depth ratios and a large range of D/D_max values.     

Methods for the visualization of digital elevation models for landform mapping

Digital elevation models (DEMs) are increasingly used for landform mapping, particularly with the growing availability of national and global datasets. In this paper we describe a variety of techniques that can visualize a DEM. We then compare five techniques to ascertain which performs the most complete and unbiased visualization. We assess the visualization techniques by comparing landforms mapped from them against a detailed morphological map (derived from mapping of multi‐azimuth relief‐shaded DEMs cross‐checked with stereo aerial photographs). Results show that no single visualization method provides complete and unbiased mapping. The relief‐shaded visualizations are particularly prone to azimuth biasing, although they can highlight subtle landforms. We recommend curvature visualization for initial mapping as this provides a non‐illuminated (and therefore unbiased) image. Initial mapping can then be supplemented with data from relief‐shaded visualizations. Copyright © 2005 John Wiley & Sons, Ltd.     

Employment mobility in high-technology agglomerations: the cases of Oxfordshire and Cambridgeshire

This paper examines labour market behaviour of the highly skilled in high-tech local economies, taking the UK examples of Oxfordshire and Cambridgeshire as case studies. It reports on data from a survey of members of three scientific institutes to compare rates of employee mobility in the two locations and considers the likely explanations and implications of those patterns.