Tidally dominated, rimmed-shelf facies of the Picún Leufú Formation (Jurassic/Cretaceous boundary) in southwest Gondwana, Neuquén Basin, Argentina

A palaeoenvironmental model for the Picún Leufú Formation (Jurassic/Cretaceous boundary), which crops out in the Neuquén Basin, Argentina, on the southwestern margin of Gondwana, is presented in this paper for the first time. Detailed stratigraphic sections exposed along National Road 40 where it crosses the Picún Leufú Creek (type locality) and in the Cerrito Caracoles area, were examined and sampled. Based on a combination of the sedimentological data obtained (facies/microfacies analysis) and the relationship between benthic macrofaunas and their taphonomic attributes, it is concluded that the formation reflects a tidally dominated, rimmed-shelf setting characterized by prograding bars dissected by channels and thick lagoonal facies with shoal developments. In the Cerrito Caracoles area, where only the basal part of the formation is exposed, it is interpreted to have been deposited in a shallow subtidal marine environment in which shelf margin facies with patch reefs have been recognized.     

Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.     

Thecamoebians in Lake Winnipeg: a tool for Holocene paleolimnology

Holocene sediments in Lake Winnipeg are expressed in the lower Lake Agassiz sequence which is unconformably overlain by the Lake Winnipeg sequence. Nine sites, covering the North and South basins and the connecting Narrows, were selected for analysis of Holocene changes in thecamoebian faunae. Only the Lake Winnipeg sequence contains thecamoebians. This study indicates that biologic productivity and consequently the type of organic material in the sediments is the main control on thecamoebian taxa in Lake Winnipeg. Other factors controlling the distribution of thecamoebians are water chemistry and turbidity. Inorganic sediment geochemistry and water temperature do not appear to significantly influence the thecamoebian fauna of Lake Winnipeg. Variations in the abundance of key thecamoebian species along a north-south transect divide Lake Winnipeg into three distinct areas. The North Basin has remained relatively unchanged since the retreat of Lake Agassiz as indicated by the domination of Difflugia manicata throughout its history. This species appears to prefer Cyanophyta and diatoms as its food source. In the Narrows harsh conditions created by turbid waters and lack of algal food taxa result in Centropyxis aculeata replacing Difflugia manicata as the dominant species. In the South Basin three thecamoebian assemblages are recognized. Cucurbitella tricuspis, indicative of eutrophic conditions, dominates the most recent sediments of the South Basin. The underlying sediments are characterized by Difflugia globulus. In Lake Winnipeg this species is not a cold climate (arctic) indicator as suggested elsewhere but instead seems to prefer sediments containing green and yellow-green algal material. A Centropyxis-Arcella Assemblage occurs only at the base of the southernmost core where it is indicative of an early phase of hyposaline conditions as developed in shallow pools during the southward transgression of Lake Winnipeg. This study illustrates the usefulness of thecamoebians as paleolimnological indicators. Environmental changes are more significant in the restricted South Basin resulting in distinct thecamoebian assemblages. In contrast, the North Basin provided a stable environment throughout the late Holocene reflected in only subtle faunal changes.     

Sedimentary processes and trace metal contaminants in the buccaneer oil/gas field,northwestern gulf of Mexico

Sediments are the ultimate sink for contaminants in the marine environment, and physical processes of sedimentation influence the distribution and accumulation of these contaminants. Evaluation of contaminant levels in sediments is one approach to assessing environmental impact; data interpretation depends on consideration of sediment texture and mineralogy, however, which profoundly influence chemical composition. In this study, comparison of potentially contaminated sediments from the production field with control populations was done only within the context of similar (as to texture and organic carbon and carbonate content) sample groups as determined by cluster analysis. Ba, Cd, and Sr are identified as contaminants. Supported by the identification of a well-crystallized expandable clay—possibly bentonite—drilling fluids are a potential source of Ba. Ba and Sr may be unnaturally high because of their abundance in discharged produced formation waters, but may also be naturally controlled by the unique faunal assemblage associated with the structures. Cd is probably derived from corrosion of the structures and assorted debris on the seafloor. In general, contamination is limited to an area within 100 m of the platforms. Furthermore, substantial erosion around platforms has probably effectively removed and dispersed the bulk of the contaminants introduced into the marine environment by the offshore exploration/production operations.     

Scleractinian cold-water corals in the Gulf of Cádiz—First clues about their spatial and temporal distribution

This paper presents the first compilation of information on the spatial distribution of scleractinian cold-water corals in the Gulf of Cádiz based on literature research and own observations (video footage, sediment samples). Scleractinian cold-water corals are widely distributed along the Spanish and Moroccan margins in the Gulf of Cádiz, where they are mainly associated with mud volcanoes, diapiric ridges, steep fault escarpments, and coral mounds. Dendrophyllia cornigera, Dendrophyllia alternata, Eguchipsammia cornucopia, Madrepora oculata and Lophelia pertusa are the most abundant reef-forming species. Today, they are almost solely present as isolated patches of fossil coral and coral rubble. The absence of living scleractinian corals is likely related to a reduced food supply caused by low productivity and diminished tidal effects. In contrast, during the past 48 kyr scleractinian corals were abundant in the Gulf of Cádiz, although their occurrence demonstrates no relationship with main climatic or oceanographic changes. Nevertheless, there exists a conspicuous relationship when the main species are considered separately. Dendrophylliids are associated with periods of relatively stable and warm conditions. The occurrence of L. pertusa mainly clusters within the last glacial when bottom current strength in the Gulf of Cádiz was enhanced and long-term stable conditions existed in terms of temperature. Madrepora oculata shows a higher tolerance to abrupt environmental changes.     

Late-Holocene paleoenvironmental change at mid-elevation on the Caribbean slope of the Cordillera Central,Dominican Republic: a multi-site,multi-proxy analysis

High-resolution proxy records from the circum-Caribbean region indicate significant variation in Late Holocene climate, especially precipitation, attributed primarily to shifts in the mean annual position of the Intertropical Convergence Zone (ITCZ). The paleoenvironmental and cultural impacts of this Late-Holocene climate variability have been analyzed intensively in the western Caribbean, and to a lesser extent in the southern Caribbean. However, the occurrence and impacts of Late Holocene climate shifts in the eastern Caribbean, especially in island interiors, has not been well documented. Here we present sediment records of Late-Holocene paleoenvironmental change from two lakes located on the Caribbean slope of the Cordillera Central in the Dominican Republic that span the last ～3000 years. Sediment characteristics, pollen, charcoal, biogenic carbonate assemblages and isotopic composition, and bulk sedimentary carbon isotope values in Laguna Castilla and Laguna de Salvador indicate extreme shifts in hydrology, vegetation, and disturbance regimes in response to climate change and human activity in the lake watersheds. Close correspondence between the hydrological histories of the lakes and trace metal concentrations in sediments of the Cariaco Basin indicate that precipitation variability here responds to the same controls, and may similarly reflect shifts in the mean annual position of the ITCZ. Human occupation of the watersheds appears to be closely linked to severe dry periods and may indicate larger scale cultural responses to precipitation variability on the island of Hispaniola. Prehistoric human populations strongly affected vegetation and disturbance regimes in the lake watersheds. Impacts may have lasted several centuries and may have been more severe than impacts of modern populations.     

Behavioural adaptations in talitrids from two Atlantic beaches

The aim of the present study was to test sun orientation and rhythmic activity of two sandhopper populations from two Atlantic macro-tidal beaches. A population from Le Verger beach (orientated to 346°, Ille et Vilaine, Brittany, France) and a population from Damgan (orientated to 195°, Morbihan, Brittany, France), were tested on the beach under clear sky discriminating for landscape vision. For both populations locomotor activity rhythm was recorded in the laboratory. The two beaches differed for climatic features, tidal range and for human use. Both talitrid populations resulted very well orientated toward the shoreline, and both used solar position and landscape vision to orient. However the multiple regression analysis of orientation with climatic features showed a different use of local cues by the two populations and a slight influence of tidal regime (ebbing and rising tide), in spite of the supralittoral zonation of sandhoppers. In the laboratory they showed a well defined rhythmic behaviour as well as a bimodal rhythmicity, explained as a tidal one. These results are a new brick in the complex picture of orientation and rhythm studies on sandy beach invertebrates.     

Evaluation of the geometric stability and the accuracy potential of digital cameras — Comparing mechanical stabilisation versus parameterisation

Recent tests on the geometric stability of several digital cameras that were not designed for photogrammetric applications have shown that the accomplished accuracies in object space are either limited or that the accuracy potential is not exploited to the fullest extent. A total of 72 calibrations were calculated with four different software products for eleven digital camera models with different hardware setups, some with mechanical fixation of one or more parts. The calibration procedure was chosen in accord to a German guideline for evaluation of optical 3D measuring systems [VDI/VDE, VDI/VDE 2634 Part 1, 2002. Optical 3D Measuring Systems–Imaging Systems with Point-by-point Probing. Beuth Verlag, Berlin]. All images were taken with ringflashes which was considered a standard method for close-range photogrammetry. In cases where the flash was mounted to the lens, the force exerted on the lens tube and the camera mount greatly reduced the accomplished accuracy. Mounting the ringflash to the camera instead resulted in a large improvement of accuracy in object space. For standard calibration best accuracies in object space were accomplished with a Canon EOS 5D and a 35 mm Canon lens where the focusing tube was fixed with epoxy (47  μm maximum absolute length measurement error in object space). The fixation of the Canon lens was fairly easy and inexpensive resulting in a sevenfold increase in accuracy compared with the same lens type without modification. A similar accuracy was accomplished with a Nikon D3 when mounting the ringflash to the camera instead of the lens (52  μm maximum absolute length measurement error in object space). Parameterisation of geometric instabilities by introduction of an image variant interior orientation in the calibration process improved results for most cameras. In this case, a modified Alpa 12 WA yielded the best results (29  μm maximum absolute length measurement error in object space). Extending the parameter model with FiBun software to model not only an image variant interior orientation, but also deformations in the sensor domain of the cameras, showed significant improvements only for a small group of cameras. The Nikon D3 camera yielded the best overall accuracy (25  μm maximum absolute length measurement error in object space) with this calibration procedure indicating at the same time the presence of image invariant error in the sensor domain. Overall, calibration results showed that digital cameras can be applied for an accurate photogrammetric survey and that only a little effort was sufficient to greatly improve the accuracy potential of digital cameras.     

Past and future sea-level rise along the coast of North Carolina,USA

We evaluate relative sea level (RSL) trajectories for North Carolina, USA, in the context of tide-gauge measurements and geological sea-level reconstructions spanning the last ~11,000 years. RSL rise was fastest (~7 mm/yr) during the early Holocene and slowed over time with the end of the deglaciation. During the pre-Industrial Common Era (i.e., 0–1800 CE), RSL rise (~0.7 to 1.1 mm/yr) was driven primarily by glacio-isostatic adjustment, though dampened by tectonic uplift along the Cape Fear Arch. Ocean/atmosphere dynamics caused centennial variability of up to ~0.6 mm/yr around the long-term rate. It is extremely likely (probability P=0.95) that 20th century RSL rise at Sand Point, NC, (2.8 ± 0.5 mm/yr) was faster than during any other century in at least 2,900 years. Projections based on a fusion of process models, statistical models, expert elicitation, and expert assessment indicate that RSL at Wilmington, NC, is very likely (P=0.90) to rise by 42–132 cm between 2000 and 2100 under the high-emissions RCP 8.5 pathway. Under all emission pathways, 21st century RSL rise is very likely (P>0.90) to be faster than during the 20th century. Due to RSL rise, under RCP 8.5, the current ‘1-in-100 year’ flood is expected at Wilmington in ~30 of the 50 years between 2050-2100.