Density-Stratified Flow Events in Great Salt Lake,Utah, USA: Implications for Mercury and Salinity Cycling

Density stratification in saline and hypersaline water bodies from throughout the world can have large impacts on the internal cycling and loading of salinity, nutrients, and trace elements. High temporal resolution hydroacoustic and physical/chemical data were collected at two sites in Great Salt Lake (GSL), a saline lake in the western USA, to understand how density stratification may influence salinity and mercury (Hg) distributions. The first study site was in a causeway breach where saline water from GSL exchanges with less saline water from a flow restricted bay. Near-surface-specific conductance values measured in water at the breach displayed a good relationship with both flow and wind direction. No diurnal variations in the concentration of dissolved (<0.45 μm) methylmercury (MeHg) were observed during the 24-h sampling period; however, the highest proportion of particulate Hg_total and MeHg loadings was observed during periods of elevated salinity. The second study site was located on the bottom of GSL where movement of a high-salinity water layer, referred to as the deep brine layer (DBL), is restricted to a naturally occurring 1.5-km-wide “spillway” structure. During selected time periods in April/May, 2012, wind-induced flow reversals in a railroad causeway breach, separating Gunnison and Gilbert Bays, were coupled with high-velocity flow pulses (up to 55 cm/s) in the DBL at the spillway site. These flow pulses were likely driven by a pressure response of highly saline water from Gunnison Bay flowing into the north basin of Gilbert Bay. Short-term flow reversal events measured at the railroad causeway breach have the ability to move measurable amounts of salt and Hg from Gunnison Bay into the DBL. Future disturbance to the steady state conditions currently imposed by the railroad causeway infrastructure could result in changes to the existing chemical balance between Gunnison and Gilbert Bays. Monitoring instruments were installed at six additional sites in the DBL during October 2012 to assess impacts from any future modifications to the railroad causeway.     

Evaluation of I-wall in New Orleans with back-calculated total stress soil parameters

This study back-calculated moduli and shear strength of soils in London Canal Ave., New Orleans, using full-scale load test data, and re-evaluated the behavior of the I-wall to explore how the existing levees and floodwalls may be reliably retrofitted and future levees and floodwalls may be designed. From the back-calculation, it turned out that the moduli of the field soils were mostly higher (1–12 times) than magnitudes appeared in Interagency Performance Evaluation Task Force (IPET). But the shear strength of a water-glazed Marsh layer in the gap turned out to be substantially lower (0.2–0.25 times) than the magnitude appeared in IPET. This much strength reduction was confirmed by field vane shear tests: tests with artificial water infiltration into the field vane hole presented immeasurably low disturbed strength and resulted in very high sensitivity that might contributed to the failure. This study also shows that the gap development and strength reduction in the water-glazed Marsh layer are two main causes of levee failure, which have been predicted in previous research. The stiffer-than-expected moduli of underlain layers did not affect the failure mechanism of the levee substantially because these underlain layers remained elastic. Therefore, retrofitting solutions should be the ones that may prevent the gap development and to reinforce the Marsh layer.     

A study on the sociospatial context of ethnic politics and entrepreneurial growth in Koreatown and Monterey Park

The study examines the various sociospatial features of immigrant populations in two transnationally-linked ethnic enclaves in terms of how they may facilitate and constrain the politics of growth and development. In recent decades, the growing ethnic enclave economies of Koreatown and Monterey Park have witnessed the emergence of progrowth ethnic interest groups comprised of immigrant capitalists, entrepreneurs, developers, and organizations, who are playing key roles in politically spearheading (re)development projects in the Los Angeles metropolitan area. Our aim is to understand how the sociospatial, entrepreneurial, and residential layout of these host municipalities set the context for the politics of growth in these ethnic enclave economies based on an analysis of GIS spatial mapping, 2000–2010 census data, and other secondary sources. The data suggests that Korean and Chinese elite face different political opportunities and challenges because of their different sociospatial characteristics—the former based on their greater entrepreneurial influence and weak electoral impact and the latter on their stronger political presence as residents.     

Electric charge and magnetic flux on rotating black holes in a force-free magnetosphere

The electric charge on rotating black holes is calculated to be ∼ BJ in the force-free configuration of Ghosh, with a horizon flux of ∼ BM ². This charge is gravitationally weak for B ∼10¹⁵ G , so that the Kerr metric applies. Being similar to the electric charge of a magnetar, both electric charge and magnetic flux should be, in sign and order of magnitude, continuous during stellar collapse into a black hole. Extraction of the rotational energy from newly formed black holes may proceed by interaction with the magnetic field.     

Vertical structure and microphysical characteristics of Typhoon Kompasu (2010) at landfall

The vertical structure and microphysics of Typhoon Kompasu that caused a lot of damage associated with strong winds and heavy rainfall over the Seoul metropolitan area on 1～2 September 2010 were examined primarily from wind profiler measurements. Four different periods that represent a stratiform, outer rainband, inner rainband, and eyewall region during passage of Typhoon Kompasu from 1200 to 2300 UTC 1 September were selected based on bright band intensities and vertical profiles of radar reflectivities and Doppler velocities. The bright band signatures observed in all of these periods indicated that the structure of Kompasu was basically stratiform in a weakening phase. Maximum rainfall rates up to 50 mm hr^?1 at the surface and mean wind speeds greater than 30 m s^?1 in the 2–4 km layer were observed in the eyewall region. Unlike the other regions that showed nearly zero vertical air motions or weak downdrafts below a melting layer, a mean updraft of ～1 m s^?1 was analyzed only in the eyewall region, which suggests that the updrafts may have enhanced drop growth that led to increasing surface rainfall rates. For each region, the vertical mean characteristics of rainfall parameters retrieved from wind profiler spectra below the melting layer were also examined. The rain properties between the inner and outer rainband were similar although they were apart with a distance of more than 100 km (> 2 hrs in time). The averaged mass-weighted mean diameters within the rainbands were larger than those in the stratiform and eyewall regions. A weaker bright band in the eyewall region suggests the presence of a relatively larger number of rimed particles associated with the updrafts around the melting layer. A stronger bright band was present in the rainbands, which indicates more active aggregation right above the melting layer.     

Parhelia in the planetary boundary layer at newmarket,Ontario: Note

Abstract

Observations of parhelia at Newmarket, Ontario on December 10, 1977 support an earlier suggestion regarding observations made in Toronto on January 22 of the same year. Parhelia were found to occur in the planetary boundary layer (PBL), particularly during the morning hours under blowing snow conditions on clear, cold (ca —17°C) winter days. Thus parhelia which occur in southern Ontario during the winter months can develop in the PBL without the presence of cirrostratus‐type clouds.     

On the Mechanism of Air Pollutant Removal in Two-Dimensional Idealized Street Canyons: A Large-Eddy Simulation Approach

Flow resistance, ventilation, and pollutant removal for idealized two-dimensional (2D) street canyons of different building-height to street-width (aspect) ratios $AR$ are examined using the friction factor $f$ , air exchange rate (ACH), and pollutant exchange rate (PCH), respectively, calculated by large-eddy simulation (LES). The flows are basically classified into three characteristic regimes, namely isolated roughness, wake interference, and skimming flow, as functions of the aspect ratios. The LES results are validated by various experimental and numerical datasets available in the literature. The friction factor increases with decreasing aspect ratio and reaches a peak at $AR = 0.1$ in the isolated roughness regime and decreases thereafter. As with the friction factor, the ACH increases with decreasing aspect ratio in the wake interference and skimming flow regimes, signifying the improved aged air removal for a wider street canyon. The PCH exhibits a behaviour different from its ACH counterpart in the range of aspect ratios tested. Pollutants are most effectively removed from the street canyon with $AR = 0.5$ . However, a minimum of PCH is found nearby at $AR = 0.3$ , at which the pollutant removal is sharply weakened. Besides, the ACH and PCH are partitioned into the mean and turbulent components to compare their relative contributions. In line with our earlier Reynolds-averaged Navier–Stokes calculations (Liu et al., Atmos Environ 45:4763–4769, 2011), the current LES shows that the turbulent components contribute more to both ACH and PCH, consistently demonstrating the importance of atmospheric turbulence in the ventilation and pollutant removal for urban areas.     

Assessing climate change vulnerability with group multi-criteria decision making approaches

This study developed an approach to assess the vulnerability to climate change and variability using various group multi-criteria decision-making (MCDM) methods and identified the sources of uncertainty in assessments. MCDM methods include the weighted sum method, one of the most common MCDM methods, the technique for order preference by similarity to ideal solution (TOPSIS), fuzzy-based TOPSIS, TOPSIS in a group-decision environment, and TOPSIS combined with the voting methods (Borda count and Copeland’s methods). The approach was applied to a water-resource system in South Korea, and the assessment was performed at the province level by categorizing water resources into water supply and conservation, flood control and water-quality sectors according to their management objectives. Key indicators for each category were profiled with the Delphi surveys, a series of questionnaires interspersed with controlled opinion feedback. The sectoral vulnerability scores were further aggregated into one composite score for water-resource vulnerability. Rankings among different MCDM methods varied in different degrees, but noticeable differences in the rankings from the fuzzy- and non-fuzzy-based methods suggested that the uncertainty with crisp data, rather widely used, should be acknowledged in vulnerability assessment. Also rankings from the voting-based methods did not differ much from those from non-voting-based (i.e., average-based) methods. Vulnerability rankings varied significantly among the different sectors of the water-resource systems, highlighting the need to assess the vulnerability of water-resource systems according to objectives, even though one composite index is often used for simplicity.