Isotopic studies of leaf water. Part 1: A physically based two-dimensional model for pine needles

Understanding of isotopic variations in leaf water is important for reconstruction of paleoclimate and assessment of global biochemical processes. We report here a study of isotopic distributions within a single needle of two pine species, Pinus resinosa Ait and Pinus strobes L., with the objective of understanding how isotopic compositions of leaf water are controlled by environmental and physiological variables. A 2D model was developed to simulate along-leaf isotopic variations and bulk leaf water isotopic compositions. In addition to variables common to all leaf water isotopic models, this 2D model also takes into account the specific geometry and dimensions of pine needles and the isotopic transport in xylem and mesophyll. The model can successfully simulate oxygen isotopic variations along a single needle and averaged over a leaf (bulk leaf water). The simulations suggest that isotopic composition of the bulk leaf water does not always depend only upon the average transpiration rate, which in turn raises questions about using leaf water isotopic values to estimate transpiration rates. An unsuccessful attempt to simulate along-needle hydrogen isotopic variations suggests that certain unknown biological process(es) may not have been incorporated into our 2D model, and if so, it calls for a reevaluation of all other models for hydrogen isotopic simulations of leaf water since they too lack these processes.Existing leaf water isotopic models are reviewed in this work. In particular, we evaluate the most frequently used model, the stomatal boundary layer model (also referred to as the Craig-Gordon model). We point out that discrepancy between the boundary layer model and the measured bulk leaf water seems to depend upon relative humidity. Using our 2D model, we show that this humidity dependency is a result of an interplay between environmental and physiological conditions: if the transpiration rate of plant leaves decreases with increasing relative humidity, our 2D model can reproduce the pattern of isotopic discrepancy between boundary layer model predictions and observations, enabling us to understand better the reason behind this discrepancy.     

中国滑坡预测预报研究综述

滑坡预测预报是有效预防滑坡灾害的重要途径之一,这方面的研究不仅受到广泛重视,且硕果累累。将中国滑坡预测预报的研究历史划分为四个阶段：① 经验判断——被动防灾避灾阶段;② 定性——半定量分析预测预报阶段;③ 理论方法探索——检验预测预报阶段;④ 理论方法深化——综合应用预测预报阶段。从监测（观测）方法、预测预报方法,以及研究特点等方面进行简要回顾,总结已有监测方法（手段）、预测预报理论、方法的研究现状,认为尚存在：① 监测方法（手段）,包括仪器、设备的精度不足;② 预测预报方法综合性、实用性不强;③ 预测预报专门理论尚待完善等问题。在分析的基础上,提出自己的观点,并进行了发展趋势展望。     

人工合成烃类包裹体研究进展

人工合成烃类包裹体不仅可以作为分析仪器校正的标样,还可以增进人们对烃类包裹体形成机制和水—岩作用机理的认识。人工合成包裹体的方法主要有三种：人工晶体生长法、焊封石英管法和金刚石压腔法,其中利用愈合人工石英(水晶)单晶裂隙合成流体包裹体技术已成为标准的合成技术。目前人工合成烃类包裹体主要利用晶体生长法合成,包括高温高压利用石英（或方解石）晶体生长愈合裂缝形成流体包裹体和低温下采用过饱和溶液重结晶形成流体包裹体。由于高温高压条件下烃类可能发生裂解,母液保真是成功实现人工合成烃类包裹体的重要前提条件。国外在人工合成烃类包裹体研究方面已经取得了一些重要的认识,但远不及人工合成无机体系流体包裹体研究那样系统和完善。国内关于人工合成烃类包裹体研究尚处于起步阶段,迫切需要开展这方面的研究工作。     

利用MC-ICPMS对水样中硼同位素比值的测定

采用Amberlite IRA-743硼特效树脂进行水溶液中硼的分离,对洗脱液温度、体积以及树脂动态交换容量等进行了实验.它的动态交换容量为4.2 mg/g,在室温条件下,用5 mL 2%HNO3可定量从树脂柱上洗脱被吸附的硼.采用Neptune型MC-ICPMS进行硼同位素组成的测定,1 μg/g浓度的硼标准溶液获得放大的信号强度约为0.7V,硼的化学分离过程有效避免了质量歧视效应.实验结果表明,MC-ICPMS对硼存在严重的记忆效应,通过采用5%HNO3-(1%HNO3 0.1%HF)-H2O-20%NH3H2O-H2O的交替清洗方法,可在约1 h内消除硼的记忆效应.在最佳仪器条件下,对含有250 ng硼的水样,可以快速测定硼的同位素组成,占δ11B测定的绝对偏差为0.4‰-0.5‰(SD).     

实验研究不同盐离子对水分子拉曼效应的影响

对流体包裹体中常见的几种盐水溶液进行了拉曼光谱分析.采用了频移参数描述水分子拉曼峰的形变强度,并讨论了频移参数与盐度之间的关系.实验分析结果表明,盐度越大,频移参数越大,水分子拉曼峰形变越大.对频移参数曲线斜率分析显示,盐类对水分子拉曼峰偏移程度影响的强弱顺序为NaCl＞Na2SO4＞NaHCO3＞Na2CO3.讨论了不同阳离子和阴离子对水伸缩振动拉曼峰的影响,结果表明,高价阳离子的影响明显高于低价阳离子;而阴离子对水拉曼峰影响的强弱顺序初步确定为Cl-≈SO2-4-＞HCO-3＞CO2-3≈NO-3.     

云南罗平中三叠世安尼期生物群的发现及其意义

本文介绍了云南罗平地区新发现的罗平生物群的产出层位、生物面貌、保存特征、古地理位置及其研究意义。该生物群产于关岭组二段薄层泥晶灰岩中,地层对比和化石鉴定表明其时代为中三叠世安尼期,以鱼类为主,伴生有爬行类、两栖类（？）、棘皮动物、节肢动物（甲壳类、昆虫等）、双壳类、腹足类以及植物化石;化石保存完好,分布广泛,埋藏方式独特。罗平生物群无论在丰度、分异度及化石保存上都极为罕见和独特,对研究埋藏学、古生态学、古地理以及三叠纪海洋生物尤其是海生爬行类都具有极为重要的意义。     

内蒙阿右旗铁板井镍矿矿床特征及成因探讨

铁板井绦矿床赋存于辉橄岩体中,辉橄岩体具有全岩矿化的特点,岩体及镍矿体的形成经历了三种不同的成矿过程:首先是岩浆深源液态重力分异作用,而后发生岩浆深源熔离-贯入(成岩、成矿)作用,形成岩体和镍矿体,最后在岩浆期后热液作用的叠加下完成整个成矿过程.该矿床是典型的主要由岩浆熔离作用形成的岩浆矿床.     

Wenchuan Earthquake： Way of thinking is changed

On 12 May, 2008, at 14：28：04 local time, an Ms 8.0 earthquake struck the Wenchuan County, Sichuan Province, in southwest China （Figure 1）. This quake left about 70,000 people dead, 18,000 missing and over 370,000 injured. In the 75 days after the main shock, 20,000 aftershocks were recorded, which included 241 with Ms≥4.0, 205 with 4.0≤M≤4.9, 30 with 5.0≤Ms≤5.9, and 6 with Ms≥6.0. The largest aftershock took place 13 days after the main shock, in Qingchuan County, 110 km northeast of the epicenter of the quake （Chen, 2008）. The losses from the quaketriggered geological disasters accounted for over a third of the total quake losses, which is extremely rare in the history of earthquake disasters. Secondary disasters, such as landslides, rockslides, landfalls, debris flows, etc., were widely distributed. Large numbers of buildings collapsed, including ones with steel reinforcing in the area of the epicenter. Infrastructure was badly damaged. In many areas, communications, and power and water supplies were cut off. The earthquake left over 35 large quake-dammed lakes, which threatened further disasters in the catchment areas.     

阿勒泰地区降水量、可降水量及降水转化率分析

根据1961-2007年47 a阿勒泰地区7个地面站每日4个频次的水汽压和日降水量资料, 分析了阿勒泰地区降水量的变化. 结果表明: 过去47 a阿勒泰地区年降水有增多趋势, 夏、冬季节降水呈明显增加趋势, 而春、秋季则增加较缓慢;降水空间分布表现为自南向北递增, 自西向东递减. 运用整层大气可降水量的经验计算公式, 计算了阿勒泰地区大气可降水量和降水转化率. 结果得出: 阿勒泰地区可降水量时间分布为夏季多、 冬季少;空间分布表现为自山区外围向山区中心递增, 降水量的大值区与可降水量的小值区对应. 降水转化率的时空分布说明这47 a其呈递增趋势, 且冬季较高. 研究结果表明, 阿勒泰地区具有一定的增水潜力.