Periodic response of a rigid block resting on a footing subjected to harmonic excitation

This study presents the dynamic behaviour of a rigid block which rests on a footing supported by a spring and a dashpot on a rigid base. The response of the rigid body is examined carefully when the base is excited by a harmonic force. It is found that a periodic motion appears in three different modes: stick-stick, stick-slip and slip-slip. The conditions that initiate the stick-stick and slip-slip modes are derived in explicit forms and the maximum sliding displacement is also obtained analytically. Useful dimensionless parameters are proposed for the presentation of the dynamic behaviour. The accuracy of results is confirmed by the response history computed by the Nigam-Jennings method.     

The correlation of whistler occurrence rate at a low latitude with thunderstorm activity at its conjugate region and with solar activity

The correlations of occurrence rate of whistlers in January during one solar cycle (1977–1987) at a low latitude station (Yamaoka, geomag. lat. 25°, L=1.26) with thunderstorm activity near its conjugate region and also with solar activity have been investigated, and it is found that the occurrence rate has no correlation with the lightning flashes near the conjugate point, while it is negatively correlated with solar activity. On the basis of these findings it is suggested that the ionospheric absorption is of major importance in the long-term variation of whistler occurrence rate, with the duct formation being of secondary effect, while the lightning activity is only a necessary condition for whistler occurrence.     

Simulation of the Collection of Catch Crops for the Recovery of Agricultural Resources using Geographic and Statistical Data

The cultivation of catch crops has great potential in agricultural areas for the recovery of nutrients, mitigation of groundwater contamination, and secondary utilization of harvestry. To estimate the potential volume of catch crops that can be collected at prospective locations, we simulated the cultivation and collection process at a regional scale using geographic and statistical data. Three types of geographic data, namely the locations of greenhouses, collecting stations and road networks, were used in a geographic information system to compute the volume of collected catch crops and carrying distance between greenhouses and collecting stations. Carbon emission from transportation of the catch crop was calculated using an improved ton‐km method, and the results were compared with the carbon content of the catch crop to evaluate the carbon balance. We found that the total fresh weight of the collected catch crops was 67900 t, of which 70% was collected at the top 15 of 73 stations. Carbon emissions from transportation ranged from >1 to 12% of the carbon content of the catch crop. The analytical method used in this study can readily be applied to other environmental studies concerning the collection of agricultural products and other biomass resources.     

Age determination of marine sediments in the western North Pacific by as partic acid chronology

The ages of fossil planktonic foraminifera,Pulleniatina obliquiloculata, in sediments (core 3bPC) from the western North Pacific were determined by aspartic acid chronology, which uses the racemization reaction rate constant of aspartic acid (k_Asp). Aspartic acid racemization-based ages (Asp ages) ranged from 7,600 yrBP at the surface, to 307,000 yrBP at a depth of 352.9 cm in the sediments. This sediment core was also dated by the glacial-interglacial fluctuation of δ¹⁸O chronology, and the ages determined by both chronologies were compared. The ages derived from aspartic acid chronology and δ¹⁸O stratigraphy were more or less consistent, but there appeared to be some differences in age estimates between these two dating methods at some depths within the core. In the core top sediments, the likely cause for the age discrepancy could be the loss of the surface sediment during sampling of the core. At depths of 66.3 and 139 cm within the core, Asp ages indicated reduced sedimentation rates duringca. 60,000-80,000 yrBP andca. 140,000–190,000 yrBP. The maximum age differences in both chronologies are 33,000 yr and 46,600 yr during each of these periods. These anomalous reductions in sedimentation rates occurring during these periods could possibly be related to some geological events, such as an increased dissolution effect of the calcium carbonate in the western North Pacific. Another possible reason for these age differences could be the unreliability in δ¹⁸O ages of core 3bPC as they were estimated by δ¹⁸O ages of another core, 3aPC.     

Methane in Izena Cauldron,Okinawa Trough

Methane in the deep water of Izena Cauldron (maximum depth: ca. 1650 m) at the east side of mid-Okinawa Trough was studied by casting a CTD system with 12 Niskin bottles for water sampling at 11 stations inside and outside the cauldron. The water contained much methane up to 706 nmoles/l. The depths of maximum concentration varied widely from station to station, indicating the existence of a considerable number of vents emitting methane and heat. The waters containing less methane formed a straight line in theT-S diagram, while those containing more methane were more largely deviated from the line. The temperature anomaly was virtually proportional to the methane concentration, suggesting that the oxidation rate of methane inside the cauldron is negligibly small and methane can be used as a tracer of the cauldron water. The relation and the estimated vertical diffusivity gave the following fluxes. The emissions of methane and heat out of the bottom below 1450 m turn out to be 1400 moles/day and 7×10¹⁰ cal/day, respectively. The total emission rates inside the cauldron are presumed to be about twice the above values. The turnover time of methane has been estimated to be 240 days, which is also that of heat generated from the bottom and probably that of the bottom water.     

Simple monitoring method for precaution of landslides watching tilting and water contents on slopes surface

A low-cost and simple monitoring method for early warning of landslides is proposed. To detect abnormal deformation of a slope, this method employs a tilt sensor in place of an extensometer on the slope surface. In order to examine the relevance of measuring rotation angle on a slope surface by tilt sensor, model tests were conducted, and rotation on the slope surface was observed together with slide displacement along the surface. The rotation data responded 30 min before failure in a model test, which could be useful as a signal for early warning. However, the behavior of rotation before failure varies from case to case, and thus, criteria to issue warning should be defined more carefully. For a model slope made of uniform loose sand, measurement of slide displacement along the slope surface is sensitive to failure at the toe, while the measurement of rotation on the slope surface is useful to detect the development of progressive failure upward along the slope. Wireless sensor units with microelectromechanical systems (MEMS) tilt sensor and volumetric water content sensor were also examined on a real slope in Kobe City, and a long-term monitoring was attempted. A simple but possible way to define the criteria of judgment to issue warning can be proposed based on combination of data obtained by the tilt sensors and volumetric water content sensors.     

Multi-scale solution for building extraction from LiDAR and image data

This paper presents a multi-scale solution based on mathematical morphology for extracting the building features from remotely sensed elevation and spectral data. Elevation data are used as the primary data to delineate the structural information and are firstly represented on a morphological scale-space. The behaviors of elevation clusters across the scale-space are the cues for feature extraction. As a result, a complex structure can be extracted as a multi-part object in which each part is represented on a scale depending on its size. The building footprint is represented by the boundary of the largest part. Other object attributes include the area, height or number of stories. The spectral data is used as an additional source to remove vegetation and possibly classify the building roof material. Finally, the results can be stored in a multi-scale database introduced in this paper. The proposed solution is demonstrated using the data derived from a Light Detection And Ranging (LiDAR) surveying flight over Tokyo, Japan. The results show a reasonable match with reference data and prove the capability of the proposed approach in accommodation of diverse building shapes. Higher density LiDAR is expected to produce better accuracy in extraction, and more spectral sources are necessary for further classification of building roof material. It is also recommended that parallel processing should be implemented to reduce the computation time.     

Temporal and spatial variations in periglacial soil movements on alpine crest slopes

This paper describes up to ten years of continuous monitoring of frost heave, creep and associated parameters on high mountain crest slopes in the Japanese and Swiss Alps, aiming to evaluate spatial and interannual variations in the rates and controls of soil movement. Shallow frost creep re?ecting diurnal frost heave activity dominates the crest slopes that lack a vegetation mat and have a thin debris mantle with good drainage. Seasonal frost heave activity can induce slightly deeper movement where ?ne soil exists below the depth reached by diurnal freeze–thaw penetration, although the shallow bedrock impedes movements below 20 cm depth. As a result, downslope velocity pro?les display strong concavity with surface velocities of 2–50 cm a^?1. The frost creep rates vary spatially, depending on the soil texture, slope gradient, frequency of temperature cycling across 0 °C and moisture availability during freeze–thaw periods. Soil movements recur in every freeze–thaw period, although with some interannual variations affected by the length of seasonal snow cover and the occurrence of precipitation during freeze–thaw periods. The Swiss Alps encounter more signi?cant interannual variations than the Japanese Alps, re?ecting the large variability of the annual snow regime. Copyright © 2005 John Wiley & Sons, Ltd.     

Shear Strength Behavior of Two Landfill Clay Liners

Direct shear tests were conducted to obtain both the shear strength of compacted clay liners (CCLs) specimens and the interface shear strength between compacted clay liner and base soil. These experiments were conducted under the conditions of five different water contents. The experimental results show that shear strength of both CCLs and CCLs/base interface decreases with the increase in the water content of CCLs and base soil. In addition, the considerate concentration of NaCl in leachate has no deteriorating effect on the shear strength of liners. Triaxial shear tests were also conducted on clay liner specimens to obtain total and effective shear strength under a fast compression. The shear strength c‘=100 kPa for sand-bentonite, respectively. These results indicate that the compacted clay-bentonite shows normal consolidation, but that the compacted sand-bentonite exhibits over-consolidation.