Travel time controls the magnitude of nitrate discharge in groundwater bypassing the riparian zone to a stream on Virginia's coastal plain

Groundwater that bypasses the riparian zone by travelling along deep flow paths may deliver high concentrations of fertilizer‐derived NO₃^? to streams, or it may be impacted by the NO₃^? removal process of denitrification in streambed sediments. In a study of a small agricultural catchment on the Atlantic coastal plain of Virginia's eastern shore, we used seepage meters deployed in the streambed to measure specific discharge of groundwater and its solute concentrations for various locations and dates. We used values of Cl^? concentration to discriminate between bypass water recharged distal to the stream and that contained high NO₃^? but low Cl^? concentrations and riparian‐influenced water recharged proximal to the stream that contained low NO₃^? and high Cl^? concentrations. The travel time required for bypass water to transit the 30‐cm‐thick, microbially active denitrifying zone in the streambed determined the extent of NO₃^? removal, and hydraulic conductivity determined travel time through the streambed sediments. At all travel times greater than 2 days, NO₃^? removal was virtually complete. Comparison of the timescales for reaction and transport through the streambed sediments in this system confirmed that the predominant control on nitrate flux was travel time rather than denitrification rate coefficients. We conclude that extensive denitrification can occur in groundwater that bypasses the riparian zone, but a residence time in biologically active streambed sediments sufficient to remove a large fraction of the NO₃^? is only achieved in relatively low‐conductivity porous media. Instead of viewing them as separate, the streambed and riparian zone should be considered an integrated NO₃^? removal unit. Copyright © 2011 John Wiley & Sons, Ltd.     

Trace element distribution in the soils above deeply weathered pegmatites, Virginia, U.S.A.: implications for exploration

Chemical partitioning data are of fundamental interest to exploration geochemists. This paper is one of the few studies which has investigated the relative proportions of the rare elements in various soil extracts. The dispersion of trace elements from weathering pegmatites in Powhatan Country, Virginia, was found to be restricted to the immediate vicinity of the pegmatites. A sequential extraction procedure was used to measure the distribution of Be, La, Nb, Sn, U, Li, and Ni,among the following fractions of the B soil horizons: exchangeable, Fe and Mn oxyhydroxide, residual, and aqua regia digestion. The elements Sn, Be, Li, and U were found to be associated with soils over the complex Herbb No. 2 pegmatite, whereas La and Ni were generally associated with the background soils.A geochemical exploration model was developed using stepwise discriminant function analysis to determine the combination of elements and soil extracts that best differentiates between complex pegmatitic, simple pegmatitic, and background soils. Log-transformed aqua regia extract concentrations of Sn, La, U, and Li were the most effective variables when used to separate complex pegmatitic from simple pegmatitic soils.     

Global climatic change,hurricanes, and a tropical forest

Most, if not all forests in the Caribbean are subject to occasional disturbances from hurricanes. If current general circulation model (GCM) predictions are correct, with doubled atmospheric CO₂ (2 × CO₂), the tropical Atlantic will be between 1 °C and 4 °C warmer than it is today. With such a warming, more than twice as many hurricanes per year could be expected in the Caribbean. Furthermore, Emanuael (1987) indicates that in a warmed world the destructive potential of Atlantic hurricanes could be increased by 40% to 60%. While speculative, these increases would dramatically change the disturbance regimes affecting tropical forests in the region and might alter forest structure and composition. Global warming impacts through increased hurricane damage on Caribbean forests are presented.An individual tree, gap dynamics forest ecosystem model was used to simulate the range of possible hurricane disturbance regimes which could affect the Luquillo Experimental Forest in Puerto Rico. Model storm frequency ranged from no storms at all up to one storm per year; model storm intensity varied from no damage up to 100% mortality of trees. The model does not consider the effects of changing temperature and rainfall patterns on the forest. Simulation results indicate that with the different hurricane regimes a range of forest types are possible, ranging from mature forest with large trees, to an area in which forest trees are never allowed to reach maturity.     

Aluminum-26 in meteorites—VII. Ureilites,their unique radiation history

Cosmogenic ²⁶A1 activities have been measured by γ-γ coincidence counting in the three ureilites which had not previously been studied. The values in dpm/kg are: Dingo Pup Donga, 38.4 ± 2.4; North Haig, 39.3 ± 4.8; Dyalpur, 55.8 ± 4.8. Five of the six known ureilites thus have lower ²⁶A1 contents, 63 per cent to 77 per cent, than the calculated saturation values, in marked contrast to most other stony meteorites. This cannot be attributed to short cosmic ray exposure ages. Nor do size and depth effects account for the narrow range of ²⁶A1 activities, because a nuclear particle track study indicates that preatmospheric radii were highly variable, from ≥ 40 cm for Goalpara to only a few cm for Dingo Pup Donga. By default, the most likely explanation is that the ureilites had much smaller or much larger orbits than all other stony meteorites.     

Analysis and modeling of the seasonal South China Sea temperature cycle using remote sensing

The present paper describes the analysis and modeling of the South China Sea (SCS) temperature cycle on a seasonal scale. It investigates the possibility to model this cycle in a consistent way while not taking into account tidal forcing and associated tidal mixing and exchange. This is motivated by the possibility to significantly increase the model’s computational efficiency when neglecting tides. The goal is to develop a flexible and efficient tool for seasonal scenario analysis and to generate transport boundary forcing for local models. Given the significant spatial extent of the SCS basin and the focus on seasonal time scales, synoptic remote sensing is an ideal tool in this analysis. Remote sensing is used to assess the seasonal temperature cycle to identify the relevant driving forces and is a valuable source of input data for modeling. Model simulations are performed using a three-dimensional baroclinic-reduced depth model, driven by monthly mean sea surface anomaly boundary forcing, monthly mean lateral temperature, and salinity forcing obtained from the World Ocean Atlas 2001 climatology, six hourly meteorological forcing from the European Center for Medium range Weather Forecasting ERA-40 dataset, and remotely sensed sea surface temperature (SST) data. A sensitivity analysis of model forcing and coefficients is performed. The model results are quantitatively assessed against climatological temperature profiles using a goodness-of-fit norm. In the deep regions, the model results are in good agreement with this validation data. In the shallow regions, discrepancies are found. To improve the agreement there, we apply a SST nudging method at the free water surface. This considerably improves the model’s vertical temperature representation in the shallow regions. Based on the model validation against climatological in situ and SST data, we conclude that the seasonal temperature cycle for the deep SCS basin can be represented to a good degree. For shallow regions, the absence of tidal mixing and exchange has a clear impact on the model’s temperature representation. This effect on the large-scale temperature cycle can be compensated to a good degree by SST nudging for diagnostic applications.     

Calculating activity coefficients in hydrometallurgy — A review

Recent developments for estimating activity coefficients of electrolytes both in pure and multicomponent aqueous solutions are reviewed with good success generally attained up to saturation. Examples are presented to illustrate applications of these methods in calculating ion concentrations, vapor pressures, and solubility limits, for some problems encountered in hydrometallurgy.     

Stresses in column-supported hyperboloidal shells subject to seismic loading

The computation of stresses within a finite element displacement method analysis of a shell of revolution is considered. The common procedure of applying the kinematic and constitutive laws to the displacement functions is examined and justified for models where the displacements are represented by high-order polynomial expansions. Also, two alternative computational formats within this technique are explored. The influence of the column-supported base condition on a hyperboloidal shell of revolution is studied with respect to the stresses calculated from a response spectrum analysis. These studies emphasize the importance of accurately modelling the base region of a column-supported shell such as a hyperbolic cooling tower.     

Tectonic evolution of the Cape and Karoo basins of South Africa

The Cape and Karoo basins formed within the continental interior of Gondwana. Subsidence resulted from the vertical motion of rigid basement blocks and intervening crustal faults. Each basin episode records a three-stage evolution consisting of crustal uplift, fault-controlled subsidence, and long periods of regional subsidence largely unaccompanied by faulting or erosional truncation. The large-scale episodes of subsidence were probably the result of lithospheric deflection due to subduction-driven mantle flow. The early Paleozoic Cape basin records the combined effects of a north-dipping intra-crustal décollement (a late Neoproterozoic suture) and a right-stepping offset between thick Rio de la Plata craton and Namaqua basement. Following the Saldanian orogeny, a suite of small rift basins and their post-rift drape formed at this releasing stepover. Great thicknesses of quartz sandstone (Ordovician–Silurian) and mudstone (Devonian) accumulation are attributed to subsidence by rheological weakening and mantle flow. In contrast, the Karoo basin is a cratonic cover that mimics the underlying basement blocks. The Permian Ecca and lower Beaufort groups were deposited in a southward-deepening ramp syncline by extensional decoupling on the intra-crustal décollement. Reflection seismic and deep-burial diagenetic studies indicate that the Cape orogeny started in the Early Triassic. Deformation was partitioned into basement-involved strike-slip faults and thin-skinned thrusting. Uplift of the Namaqua basement resulted in erosion of the Beaufort cover. East of the Cape fold belt, contemporaneous subsidence and tilting of the Natal basement created a late Karoo transtensional foreland basin, the Stormberg depocentre. Early Jurassic tectonic resetting and continental flood basalts terminated the Karoo basin.