Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.     

北冰洋海冰和海水变异对海洋生态系统的潜在影响

最近30年来,北冰洋海冰和海水发生了急剧变化:海冰覆盖面积减少、冰层变薄、水温升高、淡水输入增加、污染加剧,正威胁着现有与海冰关系密切的生态系统。预期随着变化的持续,与海冰相关的食物链将在部分海域消失并被较低纬度的海洋物种所取代、总初级生产力有望增加并为人类带来更多的渔获量、而北极熊和海象等以海冰作为栖息和捕食场所的大型哺乳动物的生存前景堪忧。今后人类将更为重视对北冰洋生态环境变化规律的认识并加以运用、关注北冰洋特有物种的命运并加以力所能及的保护、评估北冰洋生态系统的变化对人类社会经济的影响以期及早采取应对措施。数据积累是目前制约北极研究的最大障碍,但随着 SEARCH 等大型国际研究计划的实施,对北冰洋生态系统的监测和研究将更为系统和全面。     

重庆红池坝地电场变化分析

利用磁静日时序叠加方法和FFT频谱分析方法对红池坝地电场观测资料进行逐月处理，并与巫山建坪台地磁观测资料进行对比，分析红池坝地电场静日变化特征；计算红池坝台站磁暴期间产生的感应电场，与地电场观测数据对比，分析地电暴的特征。结果表明，静日随着月份的变化，相位发生变化，与巫山建坪地磁Sq变化一致；1月、2月、11月、12月的地电场日变幅明显小于其他月份；地电场显著周期成分与磁静日地磁场相同，并且通过周期成分的逐月对比分析得到，地电场与地磁D分量的不同周期成分的频谱值随时间的变化基本一致；某一方向的地电暴与该垂直方向的磁暴和该地区的电性结构有关；地电暴观测值与地磁感应电流计算值呈线性关系；地电暴变化与K值呈指数关系。     

A method for the extraction of partition lines from long and narrow patches that account for structural features

The extraction of partition lines for long and narrow patches (LN patches) is an important yet difficult problem in the generalization of thematic data. When current methods are used to process polygons with irregular shapes or complex branch convergence zones, the extracted line structural features tend to be inaccurate and topologically erroneous. In this article, we propose an improved partition lines extraction algorithm of constrained Delaunay triangulation to counter these issues. The proposed method aims to maintain consistency between the extracted line structure characteristics and the actual object structure, especially for complex branch convergence zones. First, we describe three types of aggregation patterns (Type A, B, and C aggregation zones) that occur in partition line extractions for LN patches of complex branch convergence zones using Delaunay triangulation. Then, a partition line extraction algorithm that accounts for the direction between the edges of triangles and the distance of nodes in aggregation zones is proposed. Finally, we test our method for a dataset relating to Guizhou Province, China. Compared with the current method that uses quantitative indicators and visualization, the results indicate that our method not only has applicability for simple situations but also is superior for preserving structural features of complex branch convergence zones.     

长江口扁担沙动力地貌变化过程研究

河口浅滩不仅为人类提供宝贵湿地资源，而且是调控河势演变的重要因素。研究河口浅滩动力地貌演变规律对航道整治、湿地生态开发及岸堤防护等具有重要价值。本文利用最近150多年的长江口历史海图资料、实测水深与水文泥沙数据，分析长江口南支最大的浅滩—扁担沙动力地貌演变格局及其变化机制。结果表明:(1) 1860?2016年期间，扁担沙反复历经淤积?冲刷?淤积，浅滩由最初水下阴滩发育出露而形成纺锤状沙体，随后演变为细长扁担状，沙尾切滩成爪状沙体，下扁担沙则伴随爪状缝隙被不断填充而淤长；(2)自1954年洪水到目前，扁担沙?2 m、?5 m等深线包络的面积与体积整体上均呈现增长态势，其中面积年均增长率分别为0.88 km2/a和0.81 km2/a，体积年均增长率分别为1.3×106 m3/a和5×106 m3/a；扁担沙浅滩在不同时期冲淤变化不同，其中1998年出现大幅度冲刷，平均冲刷厚度达到1.4 m；(3)扁担沙体积变化和长江入海泥沙的增减无直接联系，但与入海径流量的变化密切相关；(4)白茆沙“南强北弱”的河势、南北港分流工程以及东风西沙水库的建立导致扁担沙向北推移。     

IU Cancri:a solar-type contact binary with mass transfer

We present new CCD photometry of the solar-type contact binary IU Cnc, which was observed from November 2017 to March 2018 with three small telescopes in China. BV light curves imply that IU Cnc is a W-type contact binary with total eclipses. The photometric solution indicates that the mass ratio and fill-out factor are q = 4.104 ± 0.004 and f = 30.2% ± 0.3%, respectively. From all available light minimum times, the orbital period may increase at a rate of dP/dt = +6.93(4) × 10~(-7) d yr~(-1), which may result from mass transfer from the secondary component to the primary one. With mass transferring,IU Cnc may evolve from a contact configuration into a semi-detached configuration.     

Numerical Observation of Three-Dimensional Wing Cracking of Cracked Chevron Notched Brazilian Disc Rock Specimen Subjected to Mixed Mode Loading

The cracked chevron notched Brazilian disc (CCNBD) specimen has been suggested by International Society for Rock Mechanics for measuring mode I fracture toughness of rocks. Subsequently, this specimen geometry has been widely extended to conduct mixed mode fracture tests on rocks as well. A straight through crack front during the fracturing process upon the root of the chevron notch is assumed in the testing principle, but has never been thoroughly evaluated before. In this study, for the first time, the progressive rock fracture mechanism of the CCNBD rock specimen under mixed mode loading is numerically simulated. Specimens under representative mixed mode loading angles are modelled; and the assumption of the straight through crack front growth is critically assessed. The results show that not only the notch tip but also the saw-cut chevron notch cracks during the experiments, yielding a prominent twisted front, far from being straight. The crack front never grows up to the root of the notch ligament and the straight through crack front assumption is never satisfied in the realistic rock fracture progress of this chevron notched specimen subjected to mixed mode loads. In contrast, the fracture progress features typical three-dimensional wing cracking towards the loading ends. The numerically observed progressive fracture mechanism reveals that the measuring principle of mixed mode fracture tests employing CCNBD specimens is significantly violated and the measures of both modes I and II fracture toughness are uncertain.