Energy flow in Branchiura sowerbyi (Oligochaeta: tubificidae) in a shallow macrophyte-dominated lake, Biandantang Lake

The energy flow ofBranchiura sowerbyi was studied for the first time in China in a shallow macrophytic lake, Biandantang Lake, Hubei Province. The energy flow was calculated from the measurement of flesh production (12.5241kJ/m²a), egestion (517.7302kJ/m²a), metabolism (38.3273 kJ/m²a), and excretion (4.3798kJ/m²a). The net growth efficiency of the species is about 22.7%, which accords well with the generally reported value for oligochaetes. In addition, the relationship between starvation respiration (R, mgO₂/ind·d), wet weight (Ww, mg) and temperature (T, °C) were also measured, with the regression function beingR=0.008Ww^0.736 e^0.050T. Project supported by NSFC (30270278, 3960019), the foundation of the government of Hubei Province (No. 2000J109), and the foundation of Ecological Station, CAS in the Institute of Hydrobiology.     

ENERGY FLOW OF BELIAMYA AERUGINOSA IN A SHALLOW ALGAL LAKE, HOUHU LAKE （WUHAN, CHINA）

The energy budget ofBellamya earuginosa in a shallow algal lake, Houhu Lake (Wuhan, China) was investigated by the measurement of flesh production (32.8 kJ/(m²·a)), egestion (337.7 kJ/(m²·a)), metabolism (246.7 kJ/(m²·a)), and estimation of excretion (21.4kJ/(m²·a)). The net growth efficiency of the species is about 10.9%, which accords with the generally reported value for gastropods. In addition, the relationships between starvation respiration (R, mgO₂/(Ind·d)), body weight (Wd, mg in dry wt) and temperature (T, °C) were also determined. The regression equationR=0.044Wd ^0.537 e ^0.061T was obtained by the least square method, The measured SDA of the species is 26.51% of its gross metabolism. Project No. 3960019 and 39430101 supported by NSFC and also a granted for the East Lake Ecological Experimental Station, CAS, Wuhan.     

AREAL DIFFERENTIATION AND CONSTRUCTION OF OASIS AGRICULTURAL ECOSYSTEM IN THE SHIYANG RIVER BASIN

On the basis of the study on areal differentiation of the natural environment of oasis agriculture ecosystems in the Shiyang River Basin, this paper comparatively analyzes the natural productivities, water economic benefits, production efficiency, ecological stabilities and developmental conditions of the Wuwei Oasis agricultural ecosystem in the middle reaches of the river basin and the Minqin Oasis agricultural ecosystem in the lower reaches. Under a same management level and investment of . material and energy, primary productiveness and economic benefits of the former are higher than those of the latter. Construction directions of Wuwei and Minqin oases should be different in order to alleviate the water- use contradiction between the middle and lower reaches. The construction objective of Wuwei Oasis should be efficient irrigated farming production system and Minqin Oasis should become a mixed forestry-pastoral-farming ecosystem taking ecological protection as its major function.     

High-pressure eclogites in northern Jiangsu – southern Shandong province, eastern China

Abstract Eclogites are distributed for more than 500 km along a major tectonic boundary between the Sino-Korean and Yangtze cratons in central and eastern China. These eclogites usually have high-P assemblages including omphacite + kyanite and/or coesite (or its pseudomorph), and form a high-P eclogite terrane. They occur as isolated lenses or blocks 10 cm to 300 m long in gneisses (Type I), serpentinized garnet peridotites (Type II) and marbles (Type III). Type I eclogites were formed by prograde metamorphism, and their primary metamorphic mineral assemblage consists mainly of garnet [pyrope (Prp) = 15–40 mol%], omphacite [jadeite (Jd) = 34–64 mol%], pargasitic amphibole, kyanite, phengitic muscovite, zoisite, an SiO₂ phase, apatite, rutile and zircon. Type II eclogites characteristically contain no SiO₂ phase, and are divided into prograde eclogites and mantle-derived eclogites. The prograde eclogites of Type II are petrographically similar to Type I eclogites. The mantle-derived eclogites have high MgO/(FeO + Fe₂O₃) and Cr₂O₃ compositions in bulk rock and minerals, and consist mainly of pyrope-rich garnet (Prp = 48–60 mol%), sodic augite (Jd = 10–27 mol%) and rutile. Type III eclogites have an unusual mineral assemblage of grossular-rich (Grs = 57 mol%) garnet + omphacite (Jd = 30–34 mol%) + pargasite + rutile. Pargasitic and taramitic amphiboles, calcic plagioclase (An₆₈), epidote, zoisite, K-feldspar and paragonite occur as inclusions in garnet and omphacite in the prograde eclogites. This suggests that the prograde eclogites were formed by recrystallization of epidote amphibolite and/or amphibolite facies rocks with near-isothermal compression reflecting crustal thickening during continent–continent collision of late Proterozoic age. Equilibrium conditions of the prograde eclogites range from P > 26 kbar and T= 500–750°C in the western part to P > 28 kbar and T= 810–880°C in the eastern part of the high-P eclogite terrane. The prograde eclogites in the eastern part are considered to have been derived from a deeper position than those in the western part. Subsequent reactions, manifested by (1) narrow rims of sodic plagioclase or paragonite on kyanite and (2) symplectites between omphacite and quartz are interpreted as an effect of near-isothermal decompression during the retrograde stage. The conditions at which symplectites re-equilibrated tend to increase from west (P < 10 kbar and T < 580°C) to east (P > 9 kbar and T > 680°C). Equilibrium temperatures of Type II mantle-derived eclogites and Type III eclogite are 730–750°C and 680°C, respectively.     

济南岩溶地下水化学成分的形成

本文研究济南岩溶排泄区地下水化学成分的形成。先用Cl-和NO3-浓度作为示踪剂分析补给区的大气降水输入,鉴别出西郊和平安店排泄区地下水没有被明显污染,市区和东郊排泄区地下水受到明显污染,污染主要来自当地浅层地下水或近地面土层。之后,利用西郊排泄区的测试数据进行了横向径流带的水-岩作用定量分析,与示踪剂研究结果一致,市区和东郊排泄区地下水被明显污染,同时提出地下水在径流过程中发生脱白云石化过程的趋势线。     

嵩县螃蟹沟隐爆角砾岩体与钼金矿化成因探讨

螃蟹沟隐爆角砾岩体是河南省嵩县西北部众多含钼、金角砾岩体之一,这些角砾岩体具有成群、成带分布的特点.螃蟹沟角砾岩体的定位与分布受北西向背形、北西向和北东向断裂构造的复合控制,由燕山期钙碱性岩体与岩脉的侵入,以及随后发生的隐蔽爆发-坍塌作用而生成了角砾岩体.其中包括了震碎角砾岩、隐爆角砾岩、侵入角砾岩及坍塌角砾岩.岩体被后期断裂构造作用所复合叠加,致使钼、金富集成矿,形成"多型一体"的钼金矿床.     

从统计分析看控制东海重矿物分布的因素

任何地质作用过程都是复杂的,东海也不例外,其沉积过程具有长期性、继承性和叠加性的特点.因而反映在矿物组合及其分布变化上较为复杂,影响因素颇多.然而,运用数学地质方法却可帮助我们寻找和确定其主要的影响因素,查明它们的相互关系,甚至建立定量描述的模式.而这正是传统地质学研究中的难题之一.     

Interfacial geochemistry of barium in suspension and sediment from Zhujiang Estuary

Chemical forms of Ba are determined in samples of suspension and sediment from the Zhujiang Estuary. Their interfacial geochemical processes are discussed. Total suspended Ba content is between 2. 4 and 40. 4 μg/L, and mostly exists in the crystalline form (43. 5%), secondly in the Fe-Mn oxidative form (23.1%). Percentages of organic, carbonate and exchangeable forms are 14. 8%, 11. l%and 7.4%, respectively. Total content of Ba in the sediment is between 158. 6 and 48. 0 ug/g. Percentages of crystalline form, Fe-Mn oxidative form and carbonate form are 78. 4% ,13. 5%and 8. 2%, respectively. Organic and exchangeable forms are not detected. The study on the mechanism of interfacial movement suggests that the salinity range of 10 is the turning point for the varied distribution of Ba. The subsidence of crystalline form affects the decrease of Ba content in suspension. The decrease mostly takes place in the salinity range lower than 10, which corresponds to the high value of Ba content in the sediment. The     

低硼氢氧化镁的制备及热分解动力学参数

本文以水合氯化镁、工业氨水为原料制备出了低硼含量的纯度 >99%的氢氧化镁和氧化镁。利用差热 -热重 (DTA- TG)、X-射线衍射 (XRD)、透射电子显微镜 (TEM)等手段 ,对氢氧化镁的热稳定性、相结构、表观状态以及脱水动力学参数进行了分析。结果为 :氢氧化镁以束状纤维和片状粉末共存 ,在 6 2 3K基本完成脱水反应生成氧化镁 ,其脱水反应的表观活化能 E为135 .4 k J· mol-1,指前因子 A为 5 .15× 10 10 ,反应级数 n为 1.10     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.