抽油机悬点投影测量仪

油田抽油机的抽油杆幌动幅度过大，是引起抽油杆断裂的一个重要因素，检测这种幌动幅度是防止抽油杆断裂的一种有效手段。设计了一种基于面阵CCD和普通半导体激光器（LD）测量这种幌动的悬点投影测量方法，通过数字卷积滤波，达到了范围为0－40mm，误差＜0.2mm的技术检测指标。     

“BASS 300 PARACOM”: a “model” underwaterparametric communication system

Parametric transduction offers valuable advantages for underwater acoustic communications. Perhaps the most significant benefit is the fact that high directivity is achieved by means of a physically small transmit transducer. This feature may, ultimately, be employed to permit long-range, low-frequency communication using a compact source. The high directivity is desirable to combat multipath propagation and to achieve data communications in water which is shallow by comparison with range. A real-time, high data-rate “model” differential phase shift keying (DPSK) communication system has been constructed and demonstrated. This system uses parametric transduction, with a 300-kHz primary frequency and a 50-kHz secondary frequency. Experimental results show that the system can be employed to combat multipath propagation in shallow water and can achieve high data-rate text and color image transmission at 10 and 20 kb s^-1 for 2-DPSK and 4-DPSK, respectively, through a transmission bandwidth of 10 kHz. The “model” system was developed to confirm performance predictions for a future, operational long-range link employing a 50-kHz primary frequency and a 5-kHz secondary frequency     

CCD联合平差方法及其初步实例检验

在常规照相天体测量工作中 ,对暗天体的定位是采用逐级定标星过渡的方法实现的。由于星表系统差和局部差的存在 ,最终定位结果可能包含难以把握的误差积累。在CCD小视场观测情况下时常难以找到足够数量的定标星。鉴于此 ,推导了CCD观测联合平差方法的严格矢量表达式 ,以期通过共同星的过渡 ,实现大天区统一平差。原理上此方法可实现相对于河外天体的定位 ,以削弱星表系统差和局部差对定位结果的影响。讨论了CCD联合平差方法实现中的问题 ,包括底片常数模型选择、切点位置改正、共同星的较差改正和法方程解算方法等 ,并分析了具体的处理措施。用实例初步检验了CCD联合平差方法的效果 ,表明通过对多张CCD观测的联合平差 ,可以削弱单张CCD观测参考星数目过少、单张CCD观测参考星分布不均、个别参考星存在位置偏差和局部区域参考星存在系统性位置偏差等不利因素对归算结果的影响 ,进而达到扩大视场和提高归算精度的目的     

Marine Ingressive Events Recorded in Epicontinental Sequences:Example from the Cretaceous Songliao Basin of NE China in Comparison with the Triassic Central Europe Basin of SW Germany

Songliao Basin is filled predominantly with continental facies sediments including alluvial fan, fluvial plain, fan delta , lacustrine delta, shore ?shallow lacustrine, beach salty flat, semi - deep to deep lacustrine, subaqueous gravity flow, lacustrine swamp and pyroclastic sediments. However, some event units were formed during lake - marine linking periods of the Mid - Cretaceous in the basin, which include black shales with high values for salinity ( Sr/Ba) , alkalinity (Ca Mg)/ (Si Al) , reducibility ( Ni Zn)/Ga and sulfide sulfur as well as heavy isotopes. The Breitenholz ?section to be represen-ted for facies comparison with the Cretaceous evaporitic series in Northeast China is localized in Southwest Germany. Stratig-raphically it belongs to the Crabfeld Formation of Keuper of the Germanic Triassic corresponding to Ladinian - Camian of the international reference scale, and is generally called Lower Gipskeuper. The Germanic Triassic was deposited in the epiconti-nental(cratonic) central Euro     

High-pressure eclogites in northern Jiangsu – southern Shandong province, eastern China

Abstract Eclogites are distributed for more than 500 km along a major tectonic boundary between the Sino-Korean and Yangtze cratons in central and eastern China. These eclogites usually have high-P assemblages including omphacite + kyanite and/or coesite (or its pseudomorph), and form a high-P eclogite terrane. They occur as isolated lenses or blocks 10 cm to 300 m long in gneisses (Type I), serpentinized garnet peridotites (Type II) and marbles (Type III). Type I eclogites were formed by prograde metamorphism, and their primary metamorphic mineral assemblage consists mainly of garnet [pyrope (Prp) = 15–40 mol%], omphacite [jadeite (Jd) = 34–64 mol%], pargasitic amphibole, kyanite, phengitic muscovite, zoisite, an SiO₂ phase, apatite, rutile and zircon. Type II eclogites characteristically contain no SiO₂ phase, and are divided into prograde eclogites and mantle-derived eclogites. The prograde eclogites of Type II are petrographically similar to Type I eclogites. The mantle-derived eclogites have high MgO/(FeO + Fe₂O₃) and Cr₂O₃ compositions in bulk rock and minerals, and consist mainly of pyrope-rich garnet (Prp = 48–60 mol%), sodic augite (Jd = 10–27 mol%) and rutile. Type III eclogites have an unusual mineral assemblage of grossular-rich (Grs = 57 mol%) garnet + omphacite (Jd = 30–34 mol%) + pargasite + rutile. Pargasitic and taramitic amphiboles, calcic plagioclase (An₆₈), epidote, zoisite, K-feldspar and paragonite occur as inclusions in garnet and omphacite in the prograde eclogites. This suggests that the prograde eclogites were formed by recrystallization of epidote amphibolite and/or amphibolite facies rocks with near-isothermal compression reflecting crustal thickening during continent–continent collision of late Proterozoic age. Equilibrium conditions of the prograde eclogites range from P > 26 kbar and T= 500–750°C in the western part to P > 28 kbar and T= 810–880°C in the eastern part of the high-P eclogite terrane. The prograde eclogites in the eastern part are considered to have been derived from a deeper position than those in the western part. Subsequent reactions, manifested by (1) narrow rims of sodic plagioclase or paragonite on kyanite and (2) symplectites between omphacite and quartz are interpreted as an effect of near-isothermal decompression during the retrograde stage. The conditions at which symplectites re-equilibrated tend to increase from west (P < 10 kbar and T < 580°C) to east (P > 9 kbar and T > 680°C). Equilibrium temperatures of Type II mantle-derived eclogites and Type III eclogite are 730–750°C and 680°C, respectively.     

SOHM-4与MHM-2010氢原子频标的特点比较

基于对已投入国家授时中心守时运转的SOHM-4型与MHM-2010型氢原子频标的长期关注,对这两种氢原子频标的性能作了较详细的比较和分析。讨论了它们共同的优点、各自的特长和不足之处,还给出了稳定度的测试结果。     

青海祁漫塔格地区斑岩铜矿的成矿条件和远景

文章对青海祁漫塔格地区斑岩铜矿成矿带的成矿地质条件进行了研究,其形成于造山带汇聚阶段中后期的活动陆缘环境,与驱龙斑岩铜矿对比具有相类似的成矿地质条件,找矿远景很大.特别是卡而却卡、乌兰乌珠尔、鸭子沟、尕怒大门等地区具有斑岩铜矿成矿的广阔前景,有希望找到新的大型超大型铜矿床.通过对乌兰乌珠尔矿床的解剖,该矿区构造裂隙发育,岩石蚀变强烈.具典型的"斑岩型"蚀变分带:由中心向外依次为强硅化带??硅化钾化带??绢英岩化带??青磐岩化带.成矿元素以铜为主,伴有铅、锌、锡等多种有用组分.岩浆岩、热液蚀变作用、热液运移和矿质沉淀的构造空间控制了矿床的产出.为进一步在该区找矿指明了方向.     

祁连山不同植被类型对积雪消融的影响

为研究祁连山植被对积雪消融的影响, 利用人工调查积雪深度逐日变化量和积雪盖度变化, 并结合空气雪面感热通量(SH)观测, 对祁连山水源林生态站排露沟流域海拔2 600～2 700 m青海云杉林、灌丛林、林缘、阳坡草地在2003-2007年的积雪消融进行了研究, 每年的观测从10月降雪开始到翌年5月积雪消融完结束, 共获取数据134 400个. 结果表明: 当SH<0时, 积雪消融停止;当SH>0时, 积雪消融开始;植被可以减缓积雪消融速率, 有植被的地方消融速率减慢, 反之则加快;不同植被消融速率大小顺序为草地>林缘>灌木林>乔木林;同一植被、不同坡向消融速率不同, 半阳坡云杉林＞半阴坡云杉林＞阴坡云杉林. 积雪含水率随气温升高而增大, 1月融化积雪占整个积雪的5%, 2月增大到28%, 大量积雪在3月消融, 占55%. 从坡位看, 下坡消融速率最大;在一个垂直带上, 低海拔消融速率大于高海拔. 温度是影响积雪消融的主要因子, 积雪消融速率随温度升高而增大, 反之则减小.     

浙江杭州地区中下奥陶统岩石地层研究

笔者以城市基岩地质填图和剖面研究资料为基础,选择临安市板桥乡南山上中下奥陶统剖面为候选层型,根据剖面的地层层序、岩性组合、分界标志,结合区域变质的总体特征,重新厘定、划分了4个组级岩石地层单位,并依据荆山岭与板桥剖面的地层、生物化石对比,确定其地层时代为早中奥陶世。这对重建杭州地区层型剖面与地质遗迹保护、岩石地层填图、奥陶纪石灰岩矿产资源的开发利用都具有重要意义。     

武宁县花香林泥石流灾害成因及防治对策

武宁县花香林地处江西省北部山区,是泥石流多发区,先后于1958年6月和1998年6月爆发大型的泥石流,严重影响了当地人民的生命、财产安全和经济发展.通过收集大量相关资料及现场实地调查,在分析该泥石流基本特征的基础上,对泥石流的成因进行探讨.结果表明,复杂的岩性及地质构造为泥石流的形成提供了丰富的固体物来源,是泥石流形成的基础;强降雨是形成泥石流灾害的触发条件;强降雨、地震两者相叠加时,就可能爆发泥石流.提出了对泥石流防治对策相应的建议,对山地的防灾减灾具有指导意义.