European Solar Telescope: Progress status

In this paper, the present status of the development of the design of the European Solar Telescope is described. The telescope is devised to have the best possible angular resolution and polarimetric performance, maximizing the throughput of the whole system. To that aim, adaptive optics and multi‐conjugate adaptive optics are integrated in the optical path. The system will have the possibility to correct for the diurnal variation of the distance to the turbulence layers, by using several deformable mirrors, conjugated at different heights. The present optical design of the telescope distributes the optical elements along the optical path in such a way that the instrumental polarization induced by the telescope is minimized and independent of the solar elevation and azimuth. This property represents a large advantage for polarimetric measurements. The ensemble of instruments that are planned is also presented (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A concept for a superconducting tunnelling junction based spectrograph

We describe a multi-order spectrograph concept suitable for 8-m class telescopes, using the intrinsic spectral resolution of superconducting tunnelling junction detectors to sort the spectral orders. The spectrograph works at low orders, 1–5 or 1–6, and provides spectral coverage with a resolving power of   R ≃ 8000  from the atmospheric cut-off at 320 nm to the long-wavelength end of the infrared H or K band at 1800 nm or 2400 nm. We calculate that the spectrograph would provide substantial throughput and wavelength coverage, together with high time resolution and sufficient dynamic range. The concept uses currently available technology, or technologies with short development horizons, restricting the spatial sampling to two linear arrays; however, an upgrade path to provide more spatial sampling is identified. All of the other challenging aspects of the concept – the cryogenics, thermal baffling and magnetic field biasing – are identified as being feasible.     

GREGOR solar telescope: Design and status

The integration and verification phase of the GREGOR telescope reached an important milestone with the installation of the interim 1 m SolarLite primary mirror. This was the first time that the entire light path had seen sunlight. Since then extensive testing of the telescope and its subsystems has been carried out. The integration and verification phase will culminate with the delivery and installation of the final 1.5 m Zerodur primary mirror in the summer of 2010. Observatory level tests and science verification will commence in the second half of 2010 and in 2011. This phase includes testing of the main optics, adaptive optics, cooling and pointing systems. In addition, assuming the viewpoint of a typical user, various observational modes of the GREGOR Fabry‐Pérot Interferometer (GFPI), the Grating Infrared Spectrograph (GRIS), and high‐speed camera systems will be tested to evaluate if they match the expectations and science requirements. This ensures that GREGOR will provide high‐quality observations with its combination of (multi‐conjugate) adaptive optics and advanced post‐focus instruments. Routine observations are expected for 2012 (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A retrospective of the GREGOR solar telescope in scientific literature

In this review, we look back upon the literature, which had the GREGOR solar telescope project as its subject including science cases, telescope subsystems, and post‐focus instruments. The articles date back to the year 2000, when the initial concepts for a new solar telescope on Tenerife were first presented at scientific meetings. This comprehensive bibliography contains literature until the year 2012, i.e., the final stages of commissioning and science verification. Taking stock of the various publications in peer‐reviewed journals and conference proceedings also provides the “historical” context for the reference articles in this special issue of Astronomische Nachrichten/Astronomical Notes (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Studying focal ratio degradation of optical fibres with a core size of 50 μm for astronomy

Along with the spectral attenuation properties, the focal ratio degradation (FRD) properties of optical fibres are the most important for instrumental applications in astronomy. We present a special study about the FRD of optical fibres with a core size of 50 μm to evaluate the effects of stress when mounting the fibre. Optical fibres like this were used to construct the Eucalyptus integral field unit. This fibre is very susceptible to the FRD effects, especially after the removal of the acrylate buffer. This operation is sometimes necessary to allow close packing of the fibres at the input to the spectrograph. Without the acrylate buffer, the protection of the cladding and core of the fibre may be easily damaged. In the near future, fibres of this size will be used to build the Southern Observatory for Astronomical Research (SOAR) integral field unit spectrograph (SIFS) and other instruments. It is important to understand the correct procedure which minimizes any increase in FRD during the construction of the instrument.     

Scientific instrumentation for the 1.6 m New Solar Telescope in Big Bear

The NST (New Solar Telescope), a 1.6 m clear aperture, off‐axis telescope, is in its commissioning phase at Big Bear Solar Observatory (BBSO). It will be the most capable, largest aperture solar telescope in the US until the 4 m ATST (Advanced Technology Solar Telescope) comes on‐line late in the next decade. The NST will be outfitted with state‐of‐the‐art scientific instruments at the Nasmyth focus on the telescope floor and in the Coudé Lab beneath the telescope. At the Nasmyth focus, several filtergraphs already in routine operation have offered high spatial resolution photometry in TiO 706 nm, Hα 656 nm, G‐band 430 nm and the near infrared (NIR), with the aid of a correlation tracker and image reconstruction system. Also, a Cryogenic Infrared Spectrograph (CYRA) is being developed to supply high signal‐to‐noise‐ratio spectrometry and polarimetry spanning 1.0 to 5.0 μm. The Coudé Lab instrumentation will include Adaptive Optics (AO), InfraRed Imaging Magnetograph (IRIM), Visible Imaging Magnetograph (VIM), and Fast Imaging Solar Spectrograph (FISS). A 308 sub‐aperture (349‐actuator deformable mirror) AO system will enable nearly diffraction limited observations over the NST's principal operating wavelengths from 0.4 μm through 1.7 μm. IRIM and VIM are Fabry‐Pérot based narrow‐band tunable filters, which provide high resolution two‐dimensional spectroscopic and polarimetric imaging in the NIR and visible respectively. FISS is a collaboration between BBSO and Seoul National University focussing on chromosphere dynamics. This paper reports the up‐to‐date progress on these instruments including an overview of each instrument and details of the current state of design, integration, calibration and setup/testing on the NST (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A z-invariant Rayleigh beacon wavefront sensor

An innovative concept of wavefront sensing for Rayleigh beacons is introduced along with an example of a possible wavefront sensor. This new approach does not require the gating technique to limit the useful range of the laser source and therefore looks simpler to implement than previous Rayleigh concepts, and may additionally allow more efficient use of the photons emitted by the Rayleigh beacon. Our technique is based upon an optical element in the focal plane area whose section does not change for the conjugation of different ranges from the telescope aperture, hence the name z -invariant. The wavefront sensor shown here is an example of this new class. It is a compact pupil-plane wavefront sensor and as such allows for a layer-oriented configuration. It is shown that its sensitivity, while higher than usual gating approaches, is far from the possible limits leading us to speculate that other z -invariant wavefront sensors can reach much larger efficiencies.     

Improvements on the optical differentiation wavefront sensor

We describe a novel concept for high-resolution wavefront sensing based on the optical differentiation wavefront sensor (OD). It keeps the advantages of high resolution, adjustable dynamic range, ability to work with polychromatic sources and, in addition, it achieves good performance in wavefront reconstruction when the field is perturbed by scintillation. Moreover, this new concept can be used as multi-object wavefront sensor in multiconjugate adaptive optics systems. It is able to provide high resolution and high sampling operation, which is of great interest for the projected extreme adaptive optics systems for large telescopes.     

Hopes and expectations with GREGOR

This contribution to the series of GREGOR inauguration articles addresses the history of the GREGOR telescope. It was obvious since a long time that the study of the atmospheric dynamics on the Sun needs telescopes with a large aperture. So the first plans to replace the 40 years old Gregory‐Coudé Telescope, with its 45 cm primary mirror, by a large, 1.5‐meter telescope date back to 1997. After a positive review of the project by the Deutsche Forschungsgemeinschaft in 2000, the large financial support started in 2000. Unfortunately, the new technology of the Cesic mirrors was not yet ripe to produce the large primary mirror with this light‐weight material. So, the project was much delayed. After recollecting for the reader several dates, I also go through some properties of GREGOR. I recall the aims of the project and discuss difficulties and ways to realise the intentions (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Compressed sensing for next generation instruments

This document discusses the possibility of using compressed sensing techniques for measuring 2D spectro‐polarimetric information using only one etalon and a broad prefilter. Instead of using an etalon and an extremely narrow prefilter (with all the subsequent problems of alignment), the idea is to use multiplexing techniques to include in the observations all the secondary peaks of the etalon. The reconstruction of the signal is done under the assumption that it can be efficiently reproduced in an orthogonal basis set (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

STK: A new CCD camera at the University Observatory Jena

The Schmidt‐Teleskop‐Kamera (STK) is a new CCD‐imager, which is operated since begin of 2009 at the University Observatory Jena. This article describes the main characteristics of the new camera. The properties of the STK detector, the astrometry and image quality of the STK, as well as its detection limits at the 0.9 m telescope of the University Observatory Jena are presented (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

ULTRACAM: an ultrafast, triple-beam CCD camera for high-speed astrophysics

ULTRACAM is a portable, high-speed imaging photometer designed to study faint astronomical objects at high temporal resolutions. ULTRACAM employs two dichroic beamsplitters and three frame-transfer CCD cameras to provide three-colour optical imaging at frame rates of up to 500 Hz. The instrument has been mounted on both the 4.2-m William Herschel Telescope on La Palma and the 8.2-m Very Large Telescope in Chile, and has been used to study white dwarfs, brown dwarfs, pulsars, black hole/neutron star X-ray binaries, gamma-ray bursts, cataclysmic variables, eclipsing binary stars, extrasolar planets, flare stars, ultracompact binaries, active galactic nuclei, asteroseismology and occultations by Solar System objects (Titan, Pluto and Kuiper Belt objects). In this paper we describe the scientific motivation behind ULTRACAM, present an outline of its design and report on its measured performance.     

Multi-imaging and Bayesian estimation for photon counting with EMCCDs

A multi-imaging strategy is proposed and experimentally tested to improve the accuracy of photon counting with an electron multiplying CCD (EMCCD), by taking into account the random nature of its on-chip gain and the possibility of multiple photodetection events on one pixel. This strategy is based on Bayesian estimation on each image, with a priori information given by the sum of the images. The method works even for images with large dynamic range, with more improvement in the low light level areas. In these areas, two thirds of the variance added by the EMCCD in a conventional imaging mode are removed, making the physical photon noise predominant in the detected image.     

Dynamic-range limitations of intensified CCD photon-counting detectors

The bright limit to the dynamic range of intensified CCD photon-counting detectors is governed by coincidence losses. In this paper a theoretical analysis of the loss mechanisms is carried out and verified using laboratory data. For applications where the input source is stable, such as star field imaging from space, the theoretical dynamic-range curve can then be used for accurate quantification.     

NLST: India's National Large Solar Telescope

This article introduces the new Indian 2 m telescope which has been designed by MT Mechatronics in a detailed conceptual design study for the Indian Institute of Astrophysics, Bangalore. We describe the background of the project and the science goals which shall be addressed with this telescope. NLST is a solar telescope with high optical throughput and will be equipped with an integrated Adaptive Optics system. It is optimized for a site with the kind of seeing and wind conditions as they are expected at a lake site in the Himalayan mountains. The telescope can also be used for certain night time applications. We also give the scientific rationale for this class of telescope (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

天宫2号POLAR探测器的低能X射线在轨定标

伽马暴偏振探测仪(POLAR)是天宫2号实验室上搭载的一个γ射线偏振仪,于2016年9月15日搭载在天宫2号进入低轨运行,主要用于探测在50-500 keV能区的硬X射线辐射的线偏振.POLAR由25个模块组成,每个模块有64个塑料闪烁体棒,总计有1600个塑料闪烁体棒,具有较大的有效探测面积和视场.在轨运行期间探测到多个小耀斑,它们的硬X射线光子能量通常小于50 keV,无法直接使用在轨和地面的高能定标结果来进行能谱分析.结合拉马第太阳高能光谱成像探测器(RHESSI)对耀斑SOL2016112907能谱的观测和蒙特卡洛模拟,对耀斑期间被激活的闪烁体棒进行能量低于50 keV的低能相对定标.虽然定标得到的能量阈值(～10 keV)和转换因子相对稳定,但是和高能定标给出的结果相比有显著差异,并且不同闪烁体棒显示出的差异没有明显的规律性.     

High‐order adaptive optical system for Big Bear Solar Observatory

A high‐order Adaptive Optical (AO) system for the 65 cm vacuum telescope of the Big Bear Solar Observatory (BBSO) is presented. The Coudé‐exit of the telescope has been modified to accommodate the AO system and two imaging magnetograph systems for visible‐light and near infrared (NIR) observations. A small elliptical tip/tilt mirror directs the light into an optical laboratory on the observatory's 2^nd floor just below the observing floor. A deformable mirror (DM) with 77 mm diameter is located on an optical table where it serves two wave‐front sensors (WFS), a correlation tracker (CT) and Shack‐Hartman (SH) sensor for the high‐order AO system, and the scientific channels with the imaging magnetographs. The two‐axis tip/tilt platform has a resonance frequency around 3.3 kHz and tilt range of about 2 mrad, which corresponds to about 25″ in the sky. Based on 32 × 32 pixel images, the CT detects image displacements between a reference frame and real‐time frames at a rate of 2 kHz. High‐order wave‐front aberrations are detected in the SH WFS channel from slope measurements derived from 76 sub‐apertures, which are recorded with 1,280 × 1,024 pixel Complex Metal Oxide Semiconductor (CMOS) camera manufactured by Photobit camera. In the 4 × 4 pixel binning mode, the data acquisition rate of the CMOS device is more than 2 kHz. Both visible‐light and NIR imaging magnetographs use Fabry‐Pérot etalons in telecentric configurations for two‐dimensional spectro‐polarimetry. The optical design of the AO system allows using small aperture prefilters, such as interference or Lyot filters, and 70 mm diameter Fabry‐Pérot etalons covering a field‐of‐view (FOV) of about 180″ × 180″.     

XMM‐Newton operations beyond the 10‐year design lifetime

In preparation for XMM‐Newton operations beyond the 10‐year design lifetime ESA instigated an independent review of all aspects of the mission. Unsurprisingly, the review found that the scientific interest in extending the mission is very high and likely to remain so in the foreseeable future. Most importantly, all the elements of the XMM‐Newton mission were found to be stable and trouble free with sufficient consumables and life‐limited items to allow operations of the mission until at least 2018. The review endorsed the proposal to combine elements of the Flight Control Team with those from INTEGRAL and remove real‐time instrument monitoring from ESAC in order to reduce costs and improve efficiency. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)