国遥新天地正式发布EV-Manager

9月1日,北京国遥新天地信息技术有限公司正式发布了其遥感影像管理软件EV-Manager。EV-Manager具备影像搜索引擎功能、专业遥感处理功能,以及影像库管理功能,将有效地解决遥感影像数据量巨大,数据查找和拼接输出等对外服务繁琐的现状。     

黑龙江省国土资源遥感影像数据库系统相关技术研究

本文介绍了黑龙江省国土资源遥感影像数据管理系统的相关功能,并对实现这些功能所采用的空间数据引擎技术、遥感影像金字塔技术进行了分析与探讨。     

基于Qt的卫星影像数据操作平台构建

随着可用卫星的传感器型号、数量的增加和影像光谱及空间分辨率的提升,卫星影像的数据量在显著增加。因此,构建针对大数据影像的操作平台是必不可少的。本平台是采用C++编程语言,利用Visual Studio2010集成开发环境系统开发出来的应用程序。本文首先对GDAL与Qt的体系结构进行了介绍,随后对平台中实现的功能进行了详细介绍,分析了大数据量影像的处理策略与利用GDAL库实现影像校正。本平台主要具有影像显示、建立影像金字塔、查看影像直方图、空间二维量测、手动选点几何校正及自动几何校正的功能。     

城市机载LiDAR测图平台研究与实现

以广州市从化测区为例,利用LiDAR系统获取的影像数据与点云数据,分析其数据特征,研制开发城市机载LiDAR测图平台,并在实际中得到成功应用。本文对其主要功能、关键技术进行了系统论述,该平台是在激光点云及数码航空影像综合使用上的一次成功尝试。     

基于高效配准算法的CBERS数据规模化生产系统

中巴地球资源卫星影像具有广泛的应用价值,且数据量巨大,本文讨论构建一套完整的CBERS CCD产品生产系统,实现了对其几何精纠正产品、正射纠正产品和镶嵌产品的自动化和批量化生产。论文重点探讨了系统的核心——高效准确的影像自动配准功能,在此基础上实现了对CBERS数据的正射纠正、几何精纠正及产品镶嵌等功能。本文详细介绍了系统所采用的策略、生产流程及核心算法。该系统已在实际生产中得到应用,满足相关精度指标,完全适合中低分辨率遥感影像规模化生产。     

图像全站仪影像测量精度的测试与分析

图像全站仪是世界上首款将数字近景摄影测量和全站仪相结合的测绘产品,在其内部集成了广角和长焦两个相机,结合PI-3000后处理软件,使图像全站仪具有了三维影像测量的功能。详细介绍两种影像测量的工作方式,通过实验分析两种模式的三维建模精度。     

遥感影像的融合--SPOT全色波段和多光谱影像的融合

按照影像融合的一般理论,结合Erdas软件功能实现了SPOT全色波段和多光谱影像的融合。     

遥感影像的融合——SPOT全色波段和多光谱影像的融合

按照影像融合的一般理论,结合Edas软件功能实现了SPOT全色波段和多光谱影像的融合。     

镶嵌数据集框架下海量影像管理系统设计及实现

针对传统管理方式难以解决海量影像数据管理与在线使用的难题,提出了基于镶嵌数据集存储多源海量的影像数据方法,研究设计了利用在线的方式管理与调用海量影像数据库模型的方法,开发了海量影像管理系统,实现了在线方式对海量影像高效的调用、管理、打印、下载等功能。     

GDAL在地理国情监测项目中的应用

在地理国情监测项目中,使用了大量的卫星遥感影像,这些卫星遥感影像单景数据都大于2GB。利用GDAL的快速高效的影像读取功能,动态分块读取图像,能够很好地处理这些大数据,采用扫描线算法提取地理国情监测项目的影像有效边界,实现影像接边和影像坐标范围检查。     

Monitoring drought dynamics in the Aravalli region (India) using different indices based on ground and remote sensing data

The hard-rock hilly Aravalli terrain of Rajasthan province of India suffers with frequent drought due to poor and delayed monsoon, abnormally high summer-temperature and insufficient water resources. In the present study, detailed analysis of meteorological and hydrological data of the Aravalli region has been carried out for the years 1984–2003. Standardised Precipitation Index (SPI) has been used to quantify the precipitation deficit. Standardised Water-Level Index (SWI) has been developed to assess ground-water recharge-deficit. Vegetative drought indices like Vegetation Condition Index (VCI) and Temperature Condition Index (TCI) and Vegetation Health Index (VHI) have been computed using NDVI values obtained from Global Vegetation Index (GVI) and thermal channel data of NOAA AVHRR satellite. Detailed analyses of spatial and temporal drought dynamics during monsoon and non-monsoon seasons have been carried out through drought index maps generated in Geographic Information Systems (GIS) environment. Analysis and interpretation of these maps reveal that negative SPI anomalies not always correspond to drought. In the Aravalli region, aquifer-stress shifts its position time to time, and in certain pockets it is more frequent. In comparison to hydrological stress, vegetative stress in the Aravalli region is found to be slower to begin but quicker to withdraw.     

基于SVG的矢量WebGIS实现技术研究

SVG是一种基于XML的用来描述二维矢量图形和矢量/栅格混合图形的标记语言,虽然SVG不是为了面向地理空间数据发布而制定的标准,但它的许多特性都能被广泛地应用到WebGIS中,从而实现矢量WebGIS。由于SVG通过简单的文本语句描述矢量图像,所以SVG通常数据量很小,并且SVG支持GZIP压缩,所以基于SVG构建WebGIS能减轻网络传输负载,加快地图显示速度。SVG内置了对JavaScript的支持,且SVG可通过DOM解析映像成内存中的树型结构,所以客户层可通过JavaScript对DOM的操作实现对地图的缩放、漫游、查询、图层控制等交互操作。     

浅谈DDE技术在MapInfo中的实现和应用

本文在讨论DDE技术的基础上，对MapInfo的DDE机制的实现作了探讨和分析。根据技园区域GIS的实际开发工作，介绍了利用DDE技术在MapInfo中成功地集成Foxpro和Autocad.     

遥感技术在土地利用动态监测中的应用

主要论述遥感技术在土地监测中的应用,以某地区土地利用动态遥感监测研究项目的运作过程为例进行阐述。首先介绍了土地利用动态监测的具体内容和技术路线。其次,对数据预处理与信息采集的方法与手段进行了探讨。最后,对作业的内、外业主要过程以及应提交的成果作了介绍。     

地理数据库的关系模型及其实现

本文从以图论观点分析地理实体入手,系统阐述了地理数据库关系模型的设计法和过程。作者于1984年4～9月间在微型机上设计建立了关系型地理数据库的实方验系统(RGDB)。该系统采用了本文提出的关系模型,采用了可动态扩库的子库组合结构,这种结构具有灵活性和提高空间利用率的优点。RGDB含有多种功能的数据操作命令,除了具有一般检索功能外,还能进行“开窗”选取和十分“自由”的映象选取。本文对RGDB系统的主要性能和实现途径作了扼要介绍。     

Web Service与地理信息互操作

结合当今主流IT将互联网带入Web Service的趋势,以GIS工作者的视角剖析、审视这一发展趋势对GIS互操作的重要意义。文章在介绍Web Service的设计理念及相关技术的基础上,分析了传统空间地理信息互操作技术的局限性,概括总结了Web Service在空间地理信息的共享、互操作和集成上的良好支持和适应性,指出Web Service是未来实现GIS互操作的最佳解决方案。     

Automatic extraction of building roofs using LIDAR data and multispectral imagery

Automatic 3D extraction of building roofs from remotely sensed data is important for many applications including city modelling. This paper proposes a new method for automatic 3D roof extraction through an effective integration of LIDAR (Light Detection And Ranging) data and multispectral orthoimagery. Using the ground height from a DEM (Digital Elevation Model), the raw LIDAR points are separated into two groups. The first group contains the ground points that are exploited to constitute a ‘ground mask’. The second group contains the non-ground points which are segmented using an innovative image line guided segmentation technique to extract the roof planes. The image lines are extracted from the grey-scale version of the orthoimage and then classified into several classes such as ‘ground’, ‘tree’, ‘roof edge’ and ‘roof ridge’ using the ground mask and colour and texture information from the orthoimagery. During segmentation of the non-ground LIDAR points, the lines from the latter two classes are used as baselines to locate the nearby LIDAR points of the neighbouring planes. For each plane a robust seed region is thereby defined using the nearby non-ground LIDAR points of a baseline and this region is iteratively grown to extract the complete roof plane. Finally, a newly proposed rule-based procedure is applied to remove planes constructed on trees. Experimental results show that the proposed method can successfully remove vegetation and so offers high extraction rates.     

遥感和GIS技术应用于伊拉克南部Basrah省土地利用/覆盖变化及城市扩张研究(英文)

In recent years, land use/cover dynamic change has become a key subject that needs to be dealt with in the study of global environmental change. In this paper, remote sensing and geographic information systems (GIS) are integrated to monitor, map, and quantify the land use/cover change in the southern part of Iraq (Basrah Province was taken as a case) by using a 1:250 000 mapping scale. Remote sensing and GIS software were used to classify Landsat TM in 1990 and Landsat ETM+ in 2003 imagery into five land use and land cover (LULC) classes: vegetation, sand, urban area, unused land, and water bodies. Supervised classification and normalized difference build-up index (NDBI) were used respectively to retrieve its urban boundary. An accuracy assessment was performed on the 2003 LULC map to determine the reliability of the map. Finally, GIS software was used to quantify and illustrate the various LULC conversions that took place over the 13-year span of time. Results showed that the urban area had increased by the rate of 1.2% per year, with area expansion from 3 299.1 km² in 1990 to 3 794.9 km² in 2003. Large vegetation area in the north and southeast were converted into urban construction land. The land use/cover changes of Basrah Province were mainly caused by rapid development of the urban economy and population immigration from the countryside. In addition, the former government policy of “returning farmland to transportation and huge expansion in military camps” was the major driving force for vegetation land change. The paper concludes that remote sensing and GIS can be used to create LULC maps. It also notes that the maps generated can be used to delineate the changes that take place over time. Supported by the Al-Basrah University, Iraq, the Geo-information Science and Technology Program (No. IRT 0438)China).     

基于WebGL的三维智慧管网系统的设计与实现

随着城市面貌日新月异,地下管网的建设也在持续推进,作为城市的地下“神经网络”,全天24 h保障城市的正常运转和发展。本文以实现城市管网管理系统的高可用、无插件、智能化为目标,采用“地上地下一体”“二三维一体”的设计理念,研究基于WebGL的三维智慧管网系统的关键技术,实现了管线设施管理的信息数字化、空间化与图形化。     

Reflectance variation in boreal landscape during the snow melting period using airborne imaging spectroscopy

We aim a better understanding of the effect of spring-time snow melt on the remotely sensed scene reflectance by using an extensive amount of optical spectral data obtained from an airborne hyperspectral campaign in Northern Finland. We investigate the behaviour of thin snow reflectance for different land cover types, such as open areas, boreal forests and treeless fells. Our results not only confirm the generally known fact that the reflectance of a melting thin snow layer is considerably lower than that of a thick snow layer, but we also present analyses of the reflectance variation over different land covers and in boreal forests as a function of canopy coverage. According to common knowledge, the highly variating reflectance spectra of partially transparent, most likely also contaminated thin snow pack weakens the performance of snow detection algorithms, in particular in the mapping of Fractional Snow Cover (FSC) during the end of the melting period. The obtained results directly support further development of the SCAmod algorithm for FSC retrieval, and can be likewise applied to develop other algorithms for optical satellite data (e.g. spectral unmixing methods), and to perform accuracy assessments for snow detection algorithms.A useful part of this work is the investigation of the competence of Normalized Difference Snow Index (NDSI) in snow detection in late spring, since it is widely used in snow mapping. We conclude, based on the spectral data analysis, that the NDSI -based snow mapping is more accurate in open areas than in forests. However, at the very end of the snow melting period the behavior of the NDSI becomes more unstable and unpredictable in non-forests with shallow snow, increasing the inaccuracy also in non-forested areas. For instance in peatbogs covered by melting snow layer (snow depth < 30 cm) the mean NDSI -0.6 was observed, having coefficient of variation as high as 70%, whereas for deeper snow packs the mean NDSI shows positive values.