Geospatial method for computing supplemental multi-decadal US coastal land use and land cover classification products,using Landsat data and C-CAP products

This paper discusses the development and implementation of a method that can be used with multi-decadal Landsat data for computing general coastal US land use and land cover (LULC) maps consisting of seven classes. With Mobile Bay, Alabama as the study region, the method that was applied to derive LULC products for nine dates across a 34-year time span. Classifications were computed and refined using decision rules in conjunction with unsupervised classification of Landsat data and Coastal Change and Analysis Program value-added products. Each classification’s overall accuracy was assessed by comparing stratified random locations to available high spatial resolution satellite and aerial imagery, field survey data and raw Landsat RGBs. Overall classification accuracies ranged from 83 to 91% with overall κ statistics ranging from 0.78 to 0.89. Accurate classifications were computed for all nine dates, yielding effective results regardless of season and Landsat sensor. This classification method provided useful map inputs for computing LULC change products.     

Potential of Landsat-8 and Sentinel-2A composite for land use land cover analysis

Abstract

This study proposes the development of a multi-sensor, multi-spectral composite from Landsat-8 and Sentinel-2A imagery referred to as ‘LSC’ for land use land cover (LULC) characterisation and compared with respect to the hyperspectral imagery of the EO1: Hyperion sensor. A three-stage evaluation was implemented based on the similarity observed in the spectral response, supervised classification results and endmember abundance information obtained using linear spectral unmixing. The study was conducted for two areas located around Dhundi and Rohtak in Himachal Pradesh and Haryana, respectively. According to the analysis of the spectral reflectance curves, the spectral response of the LSC is capable of identifying major LULC classes. The kappa accuracy of 0.85 and 0.66 was observed for the classification results from LSC and Hyperion data for Dhundi and Rohtak datasets, respectively. The coefficient of determination was found to be above 0.9 for the LULC classes in both the datasets as compared to Hyperion, indicating a good agreement. Thus, these three-stage results indicated the significant potential of a composite derived from freely available multi-sensor multi-spectral imagery as an alternative to hyperspectral imagery for LULC studies.     

Does environmental data increase the accuracy of land use and land cover classification?

Optical image classification converts spectral data into thematic information from the spectral signature of each object in the image. However, spectral separability is influenced by intrinsic characteristics of the targets, as well as the characteristics of the images used. The classification process will present more reliable results when aspects associated with natural environments (climate, soil, relief, water, etc.) and anthropic environments (roads, constructions, urban area) begin to be considered, as they determine and guide land use and land cover (LULC). The objectives of this study are to evaluate the integration of environmental variables with spectral variables and the performance of the Random Forest algorithm in the classification of Landsat-8 OLI images, of a watershed in the Eastern Amazon, Brazil. The classification process used 96 predictive variables, involving spectral, geological, pedological, climatic and topographic data and Euclidean distances. The selection of variables to construct the predictive models was divided into two approaches: (i) data set containing only spectral variables, and (ii) set of environmental variables added to the spectral data. The variables were selected through nonlinear correlation analysis, with the Randomized Dependence Coefficient and the Recursive Feature Elimination (RFE) method, using the Random Forest classifier algorithm. The spectral variables NDVI, bands 2, 4, 5, 6 and 7 of the dry season and band 4 of the rainy season were selected in both approaches (i and ii). The Euclidean distance from the urban area, Arenosol soil class, annual precipitation, precipitation in February and precipitation of the wettest quarter were the variables selected from the auxiliary data set. This study showed that the addition of environmental data to the spectral data reduces the limitation of the latter, regarding the discrimination of the different classes of LULC, in addition to improving the accuracy of the classification. The addition of soil classes to spectral variables provided a reduction in errors for vegetation classification (Evergreen Forest and Cerrado Sensu Stricto), as it was able to inform about nutrient availability and water storage capacity. The study demonstrates that the addition of environmental variables to the spectral variables can be an alternative to improve monitoring in areas of ecotone in Neotropical regions.     

Modelling the impacts of civil war on land use and land cover change within Kono District,Sierra Leone: a socio-geospatial approach

Capturing the scope and trajectory of changes in land use and land cover (LULC) is critical to urban and regional planning, natural resource sustainability and the overall information needs of policy makers. Studies on LULC change are generally conducted within peaceful environments and seldom incorporate areas that are politically volatile. Consequently, the role of civil conflict on LULC change remains elusive. Using a dense time stack of Landsat Thematic Mapper images and a hybrid classification approach, this study analysed LULC changes in Kono District between 1986–1991, 1991–2002 and 2002–2007 with the overarching goal of elucidating deviations from typical changes in LULC caused by Sierra Leone's civil war (1991–2002). Informed by social survey and secondary data, this study engaged the drivers that facilitated LULC changes during war and non-war periods in a series of spatial regression models in exploring the interface between civil conflict and LULC change.     

Exploitation of TerraSAR-X Data for Land use/Land Cover Analysis Using Object-Oriented Classification Approach in the African Sahel Area, Sudan

Recently, object-oriented classification techniques based on image segmentation approaches are being studied using high-resolution satellite images to extract various thematic information. In this study different types of land use/land cover (LULC) types were analysed by employing object-oriented classification approach to dual TerraSAR-X images (HH and HV polarisation) at African Sahel. For that purpose, multi-resolution segmentation (MRS) of the Definiens software was used for creating the image objects. Using the feature space optimisation (FSO) tool the attributes of the TerraSAR-X image were optimised in order to obtain the best separability among classes for the LULC mapping. The backscattering coefficients (BSC) for some classes were observed to be different for HH and HV polarisations. The best separation distance of the tested spectral, shape and textural features showed different variations among the discriminated LULC classes. An overall accuracy of 84 % with a kappa value 0.82 was resulted from the classification scheme, while accuracy differences among the classes were kept minimal. Finally, the results highlighted the importance of a combine use of TerraSAR-X data and object-oriented classification approaches as a useful source of information and technique for LULC analysis in the African Sahel drylands.     

Multiple band digital orthophoto quadrangle data: A source for generating land use maps

Abstract

The purpose of this study was to investigate the use of color infrared‐digital orthophoto quadrangle (CIR‐DOQ) data to generate land use/land cover (LULC) maps and to incorporate them as data layers in geographic information systems (GIS) involving various resource management scenarios. The Danville 7.5‐minute quadrangle located in the southern part of Limestone and Morgan counties, Alabama, was used as the study site. Data for the special CIR‐DOQ were generated by scanning four 9x9 inch CIR aerial photographs at a uniform pixel sample grid of 25 microns resulting in 2 meters ground sample resolution. One‐half of the quadrangle was used to identify training sites for performing a supervised classification of the data and the other half to verify the accuracy of the classification. The CIR‐DOQ data were found to be adequate for using a supervised classification algorithm to differentiate major LULC classes, resulting in a classification accuracy of 93 percent. The superior spatial quality of the data over commençai satellite data affords resource managers an opportunity to more effectively study land cover and surface hydrological properties of an area, soil moisture and surface soil textures, as well as differentiate among vegetation species, using remote sensing techniques. However, caution must be exercised when using multispectral classification techniques to classify mosaicked CIRDOQ data because of the image enhancements used to generate the final product. In its present form, there are some limitations to the use of the data for performing spectral classifications. Hozvever, the high spatial resolution of the data enables even the novice resource planner to effectively use the data in visual interpretations of major LULC classes.     

Investigating relationships between Landsat-7 ETM data and spatial segregation of LULC types under shifting agriculture in southern Cameroon

This paper investigates statistical relationships between land use/land cover (LULC), Landsat-7 ETM⁺ imagery and landscape mosaic structure in southern Cameroon where the conversion of tropical rain forest to shifting cultivation leads to dynamic processes, acting on the spatial aggregation of various LULC types. A Global Positioning System (GPS) was used in the field to identify a total of 171 shifting cultivation patches representing eight LULC types in two sub-areas. Because of the lack of a cloud-free image for the date of field sampling, the ETM⁺ imagery was acquired 2 months after field survey, during which it was assumed that no significant changes in LULC occurred (all dry season). Per pixel correlations were developed between spectral reflectance data, vegetation indices and LULC. As an exploratory study, several statistical methods (analysis of variance, means separations (Tukey HSD), principal component analysis (PCA), geo-statistical analysis, image classification and landscape metrics) were applied on point data and sensor images for evaluating the spatial variability within the landscape. Most variables explained 30–72% of LULC variation in the whole dataset. Those variables with high information content of LULC (infrared bands 4, 5, 7 and derived indices and PC1) also showed long ranges (6 km) spatial dependence as compared to those varying only within 1 km range. The results of these statistical analyses suggested the need to group some LULC types and the application of the Maximum Likelihood Classifier (MLC) for supervised classification provided a LULC map with the highest accuracy (81%) after consolidation of perennial LULC types, such as bush fallow, forest fallow and cocoa plantations. Landscape metrics computed from this map showed a high level of patch diversity and connectivity within the landscape and provided input data that can further be used to simulate predictive maps as substitute to cloud-covered sensor imageries. Landsat-7 ETM⁺ imagery proved to be useful in discriminating (with about 80% accuracy) the most dynamic LULC types such cropped plots and young fallow patches (shifting every season) and the extension front of the agricultural landscape.     

Spectral angle mapper and object-based classification combined with hyperspectral remote sensing imagery for obtaining land use/cover mapping in a Mediterranean region

In this study, we test the potential of two different classification algorithms, namely the spectral angle mapper (SAM) and object-based classifier for mapping the land use/cover characteristics using a Hyperion imagery. We chose a study region that represents a typical Mediterranean setting in terms of landscape structure, composition and heterogeneous land cover classes. Accuracy assessment of the land cover classes was performed based on the error matrix statistics. Validation points were derived from visual interpretation of multispectral high resolution QuickBird-2 satellite imagery. Results from both the classifiers yielded more than 70% classification accuracy. However, the object-based classification clearly outperformed the SAM by 7.91% overall accuracy (OA) and a relatively high kappa coefficient. Similar results were observed in the classification of the individual classes. Our results highlight the potential of hyperspectral remote sensing data as well as object-based classification approach for mapping heterogeneous land use/cover in a typical Mediterranean setting.     

Effect of canal on land use/land cover using remote sensing and GIS

The monitoring of land use/land covers (LULCs) is an indispensable exercise for all those involved in executing policies to optimize the use of natural resources and minimize the ill impacts on the environment. The study here aims at analyzing the changes that occurred in LULC over a time span from 1990 to 2005 using multi date data of a part of Punjab. The digital data consisted of two sets of Landsat Thematic Mapper (TM) data and one set of IRS-1C data. Utilizing hybrid classification technique for interpretation and on field validation, it has been found that canal irrigation leads to changes in LULC as there is a change in cropping pattern as well as increase in water logged area.     

Introducing landscape accuracy metric for spatial performance evaluation of land use/land cover change models

Performance evaluation is a critical step for land use/land cover (LULC) change modelling. It can be conducted through pixel quantity and its geographical location according to majority of current approaches. It is hence important to know to what extent spatial patterns of a given landscape are properly replicated in simulated LULC maps. Therefore, a new validation metric, named as landscape accuracy metric (LAM), is introduced by inspiration from landscape ecology. Unlike pixel quantity validation metrics, model performance is measured by LAM through quantifying spatial patterns including structure, composition and configuration attributes. The functionality of LAM was studied to assess the performance of the built-up change simulation under historical, ecological and stochastic scenarios, applying Cellular Automata Markov model. LAM is a flexible measure such that modellers can apply this metric through adding or eliminating various metrics of their interest in a selective manner and under different environmental circumstances.     

Quantifying land use/land cover spatio-temporal landscape pattern dynamics from Hyperion using SVMs classifier and FRAGSTATS®

This study aims to quantify the landscape spatio-temporal dynamics including Land Use/Land Cover (LULC) changes occurred in a typical Mediterranean ecosystem of high ecological and cultural significance in central Greece covering a period of 9 years (2001–2009). Herein, we examined the synergistic operation among Hyperion hyperspectral satellite imagery with Support Vector Machines, the FRAGSTATS^® landscape spatial analysis programme and Principal Component Analysis (PCA) for this purpose. The change analysis showed that notable changes reported in the experimental region during the studied period, particularly for certain LULC classes. The analysis of accuracy indices suggested that all the three classification techniques are performing satisfactorily with overall accuracy of 86.62, 91.67 and 89.26% in years 2001, 2004 and 2009, respectively. Results evidenced the requirement for taking measures to conserve this forest-dominated natural ecosystem from human-induced pressures and/or natural hazards occurred in the area. To our knowledge, this is the first study of its kind, demonstrating the Hyperion capability in quantifying LULC changes with landscape metrics using FRAGSTATS^® programme and PCA for understanding the land surface fragmentation characteristics and their changes. The suggested approach is robust and flexible enough to be expanded further to other regions. Findings of this research can be of special importance in the context of the launch of spaceborne hyperspectral sensors that are already planned to be placed in orbit as the NASA’s HyspIRI sensor and EnMAP.     

遥感和GIS技术应用于伊拉克南部Basrah省土地利用/覆盖变化及城市扩张研究(英文)

In recent years, land use/cover dynamic change has become a key subject that needs to be dealt with in the study of global environmental change. In this paper, remote sensing and geographic information systems (GIS) are integrated to monitor, map, and quantify the land use/cover change in the southern part of Iraq (Basrah Province was taken as a case) by using a 1:250 000 mapping scale. Remote sensing and GIS software were used to classify Landsat TM in 1990 and Landsat ETM+ in 2003 imagery into five land use and land cover (LULC) classes: vegetation, sand, urban area, unused land, and water bodies. Supervised classification and normalized difference build-up index (NDBI) were used respectively to retrieve its urban boundary. An accuracy assessment was performed on the 2003 LULC map to determine the reliability of the map. Finally, GIS software was used to quantify and illustrate the various LULC conversions that took place over the 13-year span of time. Results showed that the urban area had increased by the rate of 1.2% per year, with area expansion from 3 299.1 km² in 1990 to 3 794.9 km² in 2003. Large vegetation area in the north and southeast were converted into urban construction land. The land use/cover changes of Basrah Province were mainly caused by rapid development of the urban economy and population immigration from the countryside. In addition, the former government policy of “returning farmland to transportation and huge expansion in military camps” was the major driving force for vegetation land change. The paper concludes that remote sensing and GIS can be used to create LULC maps. It also notes that the maps generated can be used to delineate the changes that take place over time. Supported by the Al-Basrah University, Iraq, the Geo-information Science and Technology Program (No. IRT 0438)China).     

A comparative assessment between object and pixel-based classification approaches for land use/land cover mapping using SPOT 5 imagery

Abstract

Land use/land cover (LULC) classification with high accuracy is necessary, especially in eco-environment research, urban planning, vegetation condition study and soil management. Over the last decade a number of classification algorithms have been developed for the analysis of remotely sensed data. The most notable algorithms are the object-oriented K-Nearest Neighbour (K-NN), Support Vector Machines (SVMs) and the Decision Trees (DTs) amongst many others. In this study, LULC types of Selangor area were analyzed on the basis of the classification results acquired using the pixel-based and object-based image analysis approaches. SPOT 5 satellite images with four spectral bands from 2003 and 2010 were used to carry out the image classification and ground truth data were collected from Google Earth and field trips. In pixel-based image analysis, a supervised classification was performed using the DT classifier. On the other hand, object-oriented (K-NN) image analysis was evaluated using standard nearest neighbour as classifier. Subsequently SVM object-based classification was performed. Five LULC categories were extracted and the results were compared between them. The overall classification accuracies for 2003 and 2010 showed that the object-oriented (K-NN) (90.5% and 91%) performed better results than the pixel-based DT (68.6% and 68.4%) and object-based SVM (80.6% and 78.15%). In general, the object-oriented (K-NN) performed better than both DTs and SVMs. The obtained LULC classification maps can be used to improve various applications such as change detection, urban design, environmental management and zooning.     

Monitoring coastal zone land use and land cover changes of Abu Dhabi using remote sensing

Coastal zones are most vulnerable for landuse changes in this rapid industrialization and urbanization epoch. It is necessary to evaluate land use — land cover (LULC) changes to develop efficient management strategies. The main objective of this paper is to evaluate and quantity Abu Dhabi coastal zone LULC changes from 1972 to 2000 using multi-temporal LANDSAT satellite data and digital change detection techniques. Supervised classification coupled with expert visual interpretation techniques were used to produce LULC classified images with an accuracy of 88%. Change detection process was achieved by applying post-classification comparison techniques in ENVI software. From this study it has been observed that the important coastal landuse types of Abu Dhabi coast .i.e. wetlands and woody Vegetation (Mangrove, represented by a single species,Avicennia marina) have been reduced drastically in their extent due to reclamation, dredging, tipping and other anthropogenic activities along the coastal zone. However, it has been observed that there is rapid increase in the man-made plantation and managed vegetation from 1990 to 2000 due to the Abu Dhabi government initiation. This study has given good insight into Abu Dhabi coastal zone changes during last 3 decades.     

Detecting subpixel deciduous components to complement traditional land cover classifications in Southwest Finland

To ensure successful conservation of ecological and cultural landscape values, detailed and up-to-date spatial information of existing habitat patterns is essential. However, traditional satellite-based and raster classifications rely on pixels that are assigned to a single category and often generalized. For many fragmented key habitats, such a strategy is too coarse and complementary data is needed. In this paper, we aim at detecting pixel-wise fractional coverage of broadleaved woodland and grassland components in a hemiboreal landscape. This approach targets ecologically relevant deciduous fractions and complements traditional crisp land cover classifications. We modeled fractional components using a k-NN approach, which was based on multispectral satellite data, assisted by a digital elevation model and a contemporary map database. The modeled components were then analyzed based on landscape structure indicators, and evaluated in conjunction with CORINE classification. The results indicate that both broadleaved forest and grassland components are widely distributed in the study area, principally organized as transition zones and small patches. Landscape structure indicators show a substantial variation based on the fractional threshold, pinpointing their dependency on the classification scheme and grain. The modeled components, on the other hand, suggest high internal variation for most CORINE classes, indicating their heterogeneous appearance and showing that the presence of deciduous components in the landscape are not properly captured in a coarse land cover classification. To gain a realistic perception of the landscape, and use this information for the needs of spatial planning, both fractional results and existing land cover classifications are needed. This is because they mutually contribute to an improved understanding of habitat patterns and structures, and should be used to complement each other.     

Evaluating the Performance of Multi-Class and Single-Class Classification Approaches for Mountain Agriculture Extraction Using Time-Series NDVI

Supervised multi-class classification (MCC) approach is widely being used for regional-level land use–land cover (LULC) mapping and monitoring. However, it becomes inefficient if the end user wants to map only one particular class. Therefore, an improved single-class classification (SCC) approach is required for quick and reliable map production purpose. In this regard, the current study attempts to evaluate the performance of MCC and SCC approaches for extracting mountain agriculture area using time-series normalized differential vegetation index (NDVI). At first, samples of eight LULC classes were acquired using Google Earth image, and corresponding temporal signatures (TS) were extracted from time-series NDVI to perform classification using minimum distance to mean (MDM) and spectral angle mapper (i.e., multi-class SAM—MCSAM) under MCC approach. Secondly, under SCC approach, the TS of three agriculture classes (i.e., agriculture, mixed agriculture and plantation) were utilized as a reference to extract agriculture extent using Euclidean distance (ED) and SAM (i.e., single-class SAM—SCSAM) algorithms. The area of all four maps (i.e., MDM—19.77% of total geographical area (TGA), MCSAM—21.07% of TGA, ED—15.23% of TGA, SCSAM—13.85% of TGA) was compared with reference agriculture area (14.54% of TGA) of global land cover product, and SCC-based maps were found to have close agreement. Also, the class-wise detection accuracy was evaluated using random sample point-based error matrix which reveals the better performance of ED-based map than rest three maps in terms of overall accuracy and kappa coefficient.     

Stylized environments and ABMs: educational tools for examining the causes and consequences of land use/land cover change

A challenge in land change science is to assess the causes and consequences of LULC change and associated pattern–process relations. Increasingly, land change organizations are examining land use at local to global scales for historical, contemporary and future periods through scenarios that assess population–environment interactions. Spatial analytical tools in GIScience are being used to link people and environment and to search for the distal and proximate factors that affect local to global land use patterns. Spatial simulation models that rely upon complexity theory as the framework and agent-based models as the analytical approach offer the capability to inform through experimentation about land issues important to science and society. Using a stylized landscape where a selected set of key social, geographical and ecological elements are spatially organized, we describe how land dynamics can be examined through agent-based models as educational tools that are useful in the classroom, boardroom and public forums.     

An approach for establishing correspondence between OpenStreetMap and reference datasets for land use and land cover mapping

OpenStreetMap (OSM) provides free source data for land use and land cover (LULC) mapping of many regions globally. Earlier work has used just manual and subjective approaches to establish correspondence between paired OSM and reference datasets, an essential step for LULC mapping. This study proposes an approach to establish correspondence via three steps: (1) convert line feature(s) into polygon feature(s); (2) merge multiple polygon feature(s) into a single layer; and (3) establish correspondence and reclassify OSM and/or reference datasets. Study areas in Sheffield, London, Rome, and Paris were used for testing, and two measures (overall accuracy, OA and kappa index) were used for evaluation. Experiments were designed to verify this approach, with each pair of OSM and reference datasets initially compared after reclassification. Correspondence from one study area was then applied to another for further validation. Results show that OA was between 70 and 90% and the kappa index varied between 0.6 and 0.8. Evaluation also indicates that the correspondence obtained from one study area is applicable to another, and we illustrate the effectiveness of this approach.     

Satellite Data Classification Using Open Source Support

In this study we explored the potential of open source data mining software support to classify freely available Landsat image. The study identified several major classes that can be distinguished using Landsat data of 30 m spatial resolution. Decision tree classification (DTC) using Waikato environment for knowledge analysis (WEKA), open source software is used to prepare land use land cover (LULC) map and the result is compared with supervised (maximum likelihood classifier – MLC) and unsupervised (Iterative self-organizing data analysis technique - ISODATA clustering) classification techniques. The accuracy assessment indicates highest accuracy of the map prepared using DTC with overall accuracy (OA) 92 % (kappa = 0.90) followed by MLC with OA 88 % (kappa = 0.84) and ISODATA OA 76 % (kappa = 0.69). Results indicate that data set with a good definition of training sites can produce LULC map having good overall accuracy using decision tree. The paper demonstrates utility of open source system for information extraction and importance of DTC algorithm.