相山铀矿田铀多金属成矿时代与成矿热历史

相山铀矿田的铀多金属矿化主要可划分为碱性铀矿化、酸性铀矿化、铅锌银铜矿化和金矿化四种类型。通过沥青铀矿和矿化岩石U-Pb等时线、黄铁矿Rb-Sr等时线、绢云母~(40)Ar-~(39)Ar同位素年龄测定,结合铀多金属成矿特征研究,厘定了相山铀矿田铀多金属成矿时代,确定铀多金属矿化的成矿时序为:碱性铀矿化、铅锌银铜矿化、金矿化、酸性铀矿化。锆石裂变径迹研究表明,相山矿田铀多金属矿化样品的锆石裂变径迹峰值年龄与U-Pb、Rb-Sr和~(40)Ar-~(39)Ar同位素年龄一致性良好,裂变径迹年龄(峰值年龄)可以限定热液铀多金属成矿热事件时代。碱性铀成矿热事件的锆石裂变径迹峰值年龄为119. 8～125. 6Ma;金成矿热事件和铅锌银铜多金属成矿热事件的锆石裂变径迹峰值年龄为106. 1～113. 8Ma;酸性铀成矿热事件的锆石裂变径迹峰值年龄为86. 7～100. 0Ma;新发现一期锆石裂变径迹峰值年龄为66. 4～78. 6Ma的热事件,该期热事件可能为相山矿田最晚一期酸性铀成矿热事件。相山矿田66. 4～78. 6Ma的铀成矿热事件,与华南花岗岩型热液铀矿床的区域成矿热事件时代耦合,该发现对华南火山岩型铀矿成矿时代的重新认识,对火山岩型、花岗岩型铀矿床成矿统一性认识具有重要意义。     

相山铀矿田西部地区深部多金属矿化成矿年代与成矿流体演化:Rb-Sr同位素体系的制约

江西相山铀矿田科学深钻3号孔在深部-700 m发现大量铅锌多金属矿化脉,垂向上呈"上铀下多金属"的分布特征。本文选取深部多金属矿脉主成矿阶段(S3)自形闪锌矿样品6件和不同阶段的毒砂、黄铁矿、方铅矿、方解石等样品12件,以及围岩全岩样品17件,进行了Rb、Sr同位素组成研究。结果表明:(1)由闪锌矿Rb-Sr等时线法确定的相山铀矿田深部多金属矿化形成于121. 0±3. 5Ma,与围岩火山岩存在较大时差,可能与晚于围岩的深部次火山有关。根据穿插关系,多金属矿化略晚于碱性交代铀矿化,但明显早于酸性交代铀矿化;(2)多金属矿化脉体中金属矿物的Rb和Sr含量分别介于0. 041×10~(-6)～1. 38×10-6和2. 35×10-6～23. 11×10-6之间,Sr同位素初始比值(87Sr/86Sr)i变化较大,介于0. 706114～0. 718814之间,平均值为0. 713579,暗示相山铀矿田深部多金属矿化的成矿物质主要来源于地壳。初始流体Sr同位素值(0. 718665)明显高于成矿时赋矿围岩(流纹英安岩为0. 714581,碎斑流纹岩为0. 714417)的Sr同位素组成,表明多金属成矿流体和物质并非来自围岩火山岩;(3)由早到晚阶段的(87Sr/86Sr)i呈明显降低的演化趋势,表明成矿流体演化过程中受到大气降水的不断稀释作用。相山矿田的铀矿和深部多金属矿化同形成于华南中生代板内伸展构造背景。     

热液型铀矿铀成矿与岩浆演化关系研究——以相山矿田、诸广地区铀成矿为例

文章通过相山矿田、诸广地区岩浆-热液演化特征与铀成矿演化特征研究,建立了相山矿田、诸广地区岩浆演化序列,厘定了相山矿田铀多金属、诸广地区铀成矿演化时序,建立了相山矿田铀多金属、诸广地区铀成矿热液演化序列;阐明了铀成矿相对主体岩浆活动具有相对“独立性”和“滞后性”。相山矿田、诸广地区经历长时间、多期次岩浆活动,岩浆活动以酸性岩浆活动为主体,后期发育小规模酸性、中基性岩浆活动,铀成矿在时间上晚于大规模主体岩浆活动(酸性岩浆活动),而与晚期小规模酸性、中基性岩浆活动时空关系密切,铀成矿相对主体岩浆活动具有时间“滞后性”。铀成矿流体作用不是岩浆分异热液演化的直接产物,铀成矿是相对独立的流体成矿事件,铀成矿具有相对“独立性”,由早期到晚期,铀成矿热液具有中高温向中低温、碱性向酸性、高氧逸度向低氧逸度演化的趋势。     

江西省相山铀矿田成矿模式探讨

本文在阐述相山矿田区域地质背景和成矿特征的基础上, 分析了成矿物质来源、成矿溶液来源及成矿物质迁移途径, 建立了相山矿田铀成矿模式。认为相山矿田铀成矿是受区域地质背景控制的特定时空域内的客观产物, 区域富铀地层是成矿的物质基础, 成矿溶液源自岩浆水和混入的雨水, 岩浆及期后热液是铀迁移的载体。铀成矿模式强调了火山岩成岩过程是成矿物质的富集过程, 火山岩浆期后成矿热液系统演化孕育了相山火山盆地50Ma的成矿过程, 流体降温、浓缩、混合等成矿机制的耦合, 促使了铀沉淀、成矿。      

下庄铀矿田成矿模式

笔者对下庄铀矿田不同类型矿床的成矿期次、流体包裹体温度及成分特征等进行了对比研究,结果表明该矿田不同类型的铀矿床具有相同的物质来源,铀成矿作用经历了3个阶段。第1阶段成矿年龄为138 Ma,矿化主要受东西向构造控制,为中高温碱性热液成矿;第2阶段成矿年龄为96.4~81 Ma,矿化主要受北东向构造控制,为中低温酸性热液成矿;第3阶段成矿年龄为61 Ma,表现为后期改造作用成矿。结合区域构造、岩浆演化历史,建立了下庄铀矿田的构造控矿三维成矿模式,认为铀矿床具有多阶段叠加成矿的特点,早期构造在晚期应力作用下派生的张裂部位是找矿的有利部位。希望铀矿床存在东西向基性岩脉充填构造,其深部具有寻找东西向矿体的潜力。     

相山铀矿田火山岩浆期后成矿热液系统

文章系统论述了相山铀矿田的成矿特征,从时空尺度对成矿物质来源进行了探讨,结合成矿的构造-岩浆-地球动力学背景分析,研究了相山火山盆地成矿热液系统的形成和演化,认为相山铀矿田成矿流体系统是受区域构造环境制约、火山岩浆期后热液系统演化的客观产物。火山岩浆期后成矿热液系统在时间上延续了大约50 Ma,但在不同时间域内其活动空间有异,并由此制约着矿田内铀矿化的时空分布。文章还对矿田内深入找矿提出了建议。     

相山牛头山地区铀矿床深部多金属成矿流体特征与成矿物质来源探讨

最新的研究与钻探结果揭示,相山铀矿田深部蕴藏丰富的铜铅锌多金属矿产资源,矿田具有"上铀、下多金属"的资源空间展布样式,对这种新型矿床的形成机制迄今尚未得到阐明。文章在野外地质调查基础上,研究铀多金属矿石中矿物共生组合和流体包裹体特征,初步揭示了含矿流体的性质及其成矿机制。新的资料表明,铀矿化下部的多金属成矿作用可以划分为3期:第1期形成粒状石英-黄铁矿组合;第2期形成石英-闪锌矿-黄铜矿-方铅矿-毒砂-菱铁矿组合;第3期形成方铅矿-辉银矿-黝锡矿-方解石组合。对不同矿化期次脉石矿物中的流体包裹体进行观察鉴定、温度测试、激光拉曼成分分析及硫化物S同位素分析研究。结果表明,相山矿田多金属成矿流体早期为深部岩浆来源的富CO2流体,晚期为深部流体与大气降水混合物。成矿流体总体为中低温(120～300℃)、低盐度(w(NaCleq)=4%～8%)的热液流体。从早到晚,多金属成矿流体从中温、低盐度向低温、低盐度演化,浅部流体的混入造成的流体物理化学条件改变可能是Cu、Pb和Zn等成矿元素沉淀的主要机制。     

江西冷水坑铅锌银矿田成矿系统与成矿模式

江西冷水坑矿田具有浅部斑岩型矿体与深部层状矿体的复杂组合。深部的层状矿体曾被长期认为是受构造破碎带控制的"层控叠改型矿体",与斑岩型矿体同期形成。本文从矿床的基本地质特征入手,论述和分析了层状银铅锌矿体所具有的火山碎屑建造及成矿特点,认为矿床具有三期成矿特点,层状矿体属火山机构控制的以火山集块-角砾岩层为赋矿岩石的火山喷发-沉积成岩矿体。提出了该矿床火山构造-岩浆喷发成矿系统的主要成矿要素和成矿模式,斑岩岩浆就位及其流体活动,在产生大规模斑岩型矿化的同时,对早期的火山沉积碳酸盐层进行叠加改造而形成了与斑岩具有成因联系的层控铅锌银矿床。     

地幔流体与铀成矿作用

文中探讨了地幔流体铀成矿作用的可能性 ,并以相山世界级铀矿田为例 ,阐明了地幔流体铀成矿作用的主要特征。岩石圈之下存在一个富含放射性生热元素的富集圈 ,在造山带崩塌阶段 (岩石圈拆沉或减薄 )以及弧后拉张环境下 ,富集圈中的U、Th将随地幔流体一起上升迁移至地壳中直接成矿。相山铀矿床就是在弧后拉张环境下由当地富集地幔流体上升迁移至早先火山杂岩裂隙带中沉淀成矿而形成的。弧后拉张环境有利于地幔流体上升 ,早先的火山通道和火山杂岩中非常发育的裂隙为成矿流体提供了迁移和赋矿空间 ,成矿与幔源岩浆活动 (煌斑岩 )相伴随 ,成矿流体和成矿物质具有幔源特征 ,地幔中放射性生热元素富集圈为其提供了强大的物质基础 ,从而形成了相山超大型铀矿田。     

江西相山西部地区深部多金属矿化矿石组构学、矿物学研究及其地质意义

江西相山铀矿田西部地区实施的铀矿科学深钻3号孔在深部-700 m发现大量铅锌多金属矿化脉,垂向上呈"上铀下多金属"的分布特征。文章对深部多金属矿化进行了详细的矿物学和矿石组构学研究,并对其成因进行了探讨。研究表明,矿石结构主要有中细粒及微粒结构、自形晶粒状结构、他形晶粒状结构、填隙结构、包含结构、镶边结构、固溶体分离结构、碎裂结构、环带结构等;矿石构造主要有脉状构造、细脉状构造、条带状构造、角砾状构造、致密块状构造、稠密浸染状构造等。矿化类型主要有石英-毒砂-黄铁矿(锡石、黄铜矿)型、黄铁矿型、闪锌矿-方铅矿-黄铁矿型、闪锌矿-方铅矿-碳酸盐(菱铁矿-方解石)型,在空间上具有明显的分带性。根据矿物组合和穿插关系,矿化过程经历了成矿前期的碱性流体作用,形成矿前期绿泥石、锡石和金红石。铅锌成矿期经历了石英-毒砂阶段、黄铁矿化阶段、铅锌矿化阶段、铅锌银碳酸盐阶段等多期叠加。成矿后期以形成碳酸盐-石英脉为特征。综合分析认为,相山深部多金属矿化具有浅成、中低温特征,是与次火山岩有关的低硫化型浅成中低温热液多金属矿化。目前已经发现的铅锌多金属矿化很可能是深部矿化的一个端员,深部很有可能存在与成矿有关的次火山岩体,且具有寻找斑岩型多金属矿化的成矿潜力。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).     

NEW SET OF LOW CONCENTRATION STANDARDS FOR LA, CE, SM, YB, LU, Y, SC, V, NB AND TA IN SILICATES

We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al₂O₃-SiO₂ ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses.