卡林型金矿指示元素研究

研究表明，卡林型金矿带中金矿及其共生的低温Ｈｇ、Ａｓ、Ｓｂ矿床中普遍含有较高的Ｔｌ、Ｆ、Ｃｌ、Ｉ和Ｂ，这些元素与金有明显的相关性，它们含量变化从远矿赋矿岩→近矿围岩→矿化岩→矿石明显呈依次递增趋势。根据矿床岩矿石中Ｔｌ、Ｆ、Ｃｌ、Ｉ和Ｂ的含量变化和分布特点及其与Ａｕ的相关性，尝试把富集系数和铊含量作为指示元素的应用指标。富集系数〉５、５￣０．５和０．５￣０．１分别为矿床，矿田和矿带标志；铊含量〉１     

块状硫化物矿床的地球化学找矿标志

近年来国外发现了许多大型块状硫化物矿床，而我国进展还不大。原因之一是我们对这类矿床的地质特征，成矿条件尤其是找矿标志研究还不够。这是一类成矿物质通过热液作用在海底沉积而成的特殊矿床，故在找矿勘探讨既要研究沉积矿时形成的原生晕，又要研究热液经过围岩时蚀变而产生的次生晕?Ｍｎ晕，Ｔｌ，Ｈｇ，Ｂａ，Ａｓ和Ｚｎ等元素的异常，络合剂元素的富集，微量元素的分布，铅同位素，岩石化学异指数尤其是块状硫化物Ｃｕ矿中     

形成富亲铜元素的太古宙Au－石英、低温热液Au－Ag及Au矽卡岩成矿流体的岩浆硫化物／挥发分相互作用的机制

已有的地质、地球物理和地球化学证据表明太古宙Ａｕ－石英脉、低温热液Ａｕ－Ａｇ和Ａｕ矽卡岩成矿流体的主要组分源自岩浆，而且Ａｕ、Ａｇ及有关的富美元素也源自岩浆。太古宙Ａｕ－石英脉、太古宙Ｈｅｍｌｏ型、低温热液Ａｕ－Ａｇ和Ａｕ矽卡岩体系的元素的产出具有重要的共性，表明其具有共同的成因过程。例如，２７个元素中，４４％（ｎ＝１２）的元素出现在１０个矿床亚类的至少７个亚类之中：Ａｕ、Ａｇ、Ｆｅ、Ｃｕ、Ｐｂ、Ｚｎ、Ｈｇ、Ｍｏ、Ｓｂ、Ａｓ、Ｔｅ和ｓ（９个金属、２个类金属和１个非金属）。加上Ｂ和Ｗ，５２％（ｎ＝１４）出现在至少５个亚类之中。富集的亲铜／亲铁元素的出现频率很高，达８５％（２７个元素中的２３个）。总体元素（ｎ＝３１）的出现频率也较高，达７４％（ｎ＝２３）。所有这些主要的亲铜／亲铁元素均富集于太古宙Ａｕ－石英脉、太古宙Ｈｅｍｌｏ型、低温热液Ａｕ－Ａｇ和Ａｕ矽卡岩矿床之中。如果岩浆挥发分的饱和出现在岩浆硫化物熔体／上悬固体因重力而亏损之后，那么Ａｕ、Ａｇ和相关亲铜元素将由于高的硫化物熔体／硅酸盐岩浆的分配系数（１０￣２～１０￣４，如Ａｕ为３ｘ１０￣４，Ｓｅ为１０￣３）而从岩浆中分离出来。因此可以得出，太古宙Ａｕ－石     

扬子地块西北缘,西南缘超大型卡林型金矿床的找矿方向

根据扬子地块西北缘、西南缘卡林型金矿床的地质、地球化学等特征,可以将它们划分为三种矿床地球化学类型：Ａｕ－Ａｓ－（Ｓｂ）型、Ａｕ－Ｈｇ－（Ｔｌ或Ｕ）型和Ａｕ－Ｓｂ－黄铁矿型金矿床。Ａｕ－Ａｓ－（Ｓｂ）型金矿床可以成为超大型金矿床。     

黔西南铊矿床（点）赋矿地层中成矿元素的若干地球化学问题研究

本文以地球化学过程基本定律为指导，根据区域和矿区外围八条剖面１６９件样品的分析数据，采用柯尔莫各洛夫非参数正态检验法，对黔西南铊矿床（点）赋矿地层中成矿元素Ｔｌ、Ａｕ、Ｈｇ、Ｓｂ、Ａｓ、Ｐｂ、Ｚｎ的丰度值进行了研究。     

应用沉积物中元素的分布对利耶帕亚湖（拉脱维亚）环境状况的评价

通过仪器中子活化分析测定了拉脱维亚利耶帕亚湖沉积物样品中３３个元素的含量，在湖的北部、Ｃｒ、Ｍｎ、Ｃｕ、Ｚｎ、Ｓｂ、Ｂａ和Ｔａ的含量是增高的，这可能是由于来自冶金工业和其他来源的固态废物排入到湖中污染所致。在湖北部的沉积物中Ｃｌ和Ｕ的富集很可能是与因海水中的元素通过连接湖和波罗的海之间的运河进入湖中有关，在湖的南部有较高的Ａｓ含量，这可能与湖四周的农业耕作有关。     

南秦岭Pb,Zn,Ag,Cu,Hg,Sb,菱铁矿成矿系列

以泥盆系占优势的南秦岭成矿带中存在有重要的Ｐｂ－Ｚｎ－Ａｇ，Ａｕ，Ｈｇ－Ｓｂ及Ｃｕ矿床。它们形成中晚古生带扬子地块北部被动大陆边缘的沉积盆地演化与造山期中，成矿系列显示出时间与空间的演化特征，构在了一个热水沉积成矿系列，成矿发生于一个热旋回中，各种矿化有相似的物源，每一种地质事件都有特定的金属富集及富集在型和大型矿床是该地区构造－岩浆变质变形作用的最终产物。     

黔西南Au-As-Hg-Tl矿化区毒害金属元素的水地球化学

研究了黔西南典型Ａｕ－Ａｓ－Ｈｇ－Ｔｌ矿化区内毒害金属元素在采矿活动和自然状态影响下的水地球化学特征及其环境效应。结果表明,已开采的Ｈｇ－Ｔｌ矿区地下水和地表水中均有很高的毒害金属元素,煤采区地下水中亦表现出类似的特征,而Ｈｇ－Ｔｌ矿区外围地下水中金属元素保持在较低的水平。Ｈｇ－Ｔｌ矿区地素水中Ａｓ和Ｔｌ的分布模式表明,其含量的变化受矿区地下水排泄和尾矿淋滤作用的控制。在尚未开采的金矿区,浅层地下     

富集铊汞砷的生物是滥木厂铊矿床找矿和铊矿区污染的标志

滥木厂铊矿区植物和动物中Ｔｌ、Ｈｇ、Ａｓ含量变化总的趋势是以Ｈｇ最高,Ｔｌ次之,Ａｓ最低为特点。它们明显受生物赖以生存的地质地球化学和生物地球化学环境制约,尤其是矿区水、土壤和岩、矿石中高背景Ｔｌ、Ｈｇ、Ａｓ含量制约。矿区生物中Ｔ１、Ｈｇ、Ａｓ含量异常高,不难看出,矿区生物中Ｔ１、Ｈｇ、Ａｓ含量的高低,不仅是判别矿区污染程度的标志,也是找矿,特别是找盲矿体的标志。     

金矿勘查中的指示元素（根据晚太古代和早元古代地质体中的中温热…

本研究成果建立在对产于晚太古代录岩带中的５５个中温热液金矿床的１３７个大样的约７０种元素的分析基础上，尺管这些矿床在成矿省和单外矿床的元素共生组合和富集上有明显差别，但总体来看，Ａｕ，Ｔｅ，Ｓ，Ａｓ，Ｗ，Ｂｉ，Ａｇ和Ｓｅ依然是金矿勘探中最重要的元素，Ｔｅ，Ａｓ，Ｂｉ和Ｓｅ的富集一般大于玄武岩平均丰度的１０００－１００倍，Ｗ、Ｓ和Ａｇ的富集系数则为１００－１０。Ｓｂ，Ｂ，Ｍｏ，Ｃｕ，Ｕ，Ｈｇ，Ｐｂ，     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。