The Metamorphic and Deformational History of a Continental Collision Zone and its Geodynamic Process——as Evidenced by Qinling Complex,Western Henan,China

The Qinling orogenic belt is a collision zone between the North China andYangtze cratons.The Qinling Complex is a Precambrian metamorphic com-plex,developed in the inner zone of the orogenic belt,which records themetamorphic and deformational history and PTt path of the regional meta-morphism of the collision zone.The present paper studies the metamor-phic and deformational history and the PTt path of various tectono-metamorphic cycles in order to describe the geodynamic processes prevailing inthat part of the Qinling orogenic belt since Proterozoic.The tectonometamorphic history and evolution of the Qinling Complex isdivided into two stages:the stage of formation and the stage of modificationDuring the stage of formation dated as Proterozoic,three deformational se-quences are recognized.The amphibolite facies regional metamorphism is earlierthan or synchronous with the first or second phase of folding.Threemetamorphic zones,i.e.And-Ms,Sil-Ms,Sil-Kfs are delimited.During thestage of modification,the emp     

Metamorphic evolution of the southern part of the Hidaka belt, Hokkaido, Japan

Abstract The Hidaka metamorphic terrane in the Meguro-Shoya area, Hokkaido, Japan is divided into four progressive metamorphic zones: A—biotite zone; B—cordierite zone; C—cordierite–K-feldspar zone; and, D—sillimanite–K-feldspar zone of the andalusite–sillimanite facies series type of metamorphism. The metamorphic grade ranges from the higher temperature part of the greenschist facies (zone A) through the amphibolite facies (zones B and C) to the lower temperature part of the granulite facies (zone D). The zone boundaries intersect the bedding planes at high angles. P–T conditions estimated are 450–550°C and 2 kbar for zone A, 550–600°C and 2–2.5 kbar for zone B, 600–650°C and 2.5–3 kbar for zone C and 650–750°C and 3–4 kbar for zone D. The metapelites of zone D were partially melted.
At the later stage of the regional metamorphism which is early Oligocene to early Miocene in age, cordierite tonalite and biotite tonalite intrusives associated with segments of the highest grade rocks (zone D) were emplaced into the lower temperature part of the regional metamorphic rocks, giving rise to a contact metamorphic aureole. The thermally metamorphosed terrain (zone C') belongs to the amphibolite facies and its P–T conditions are estimated to have been 550–700°C and 2 kbar.
The P–T–t paths of the Hidaka metamorphism show a thickening–heating–uplifting process. The metamorphism is inferred to have taken place beneath an active island arc accompanied by partial melting of the crust.     

P–T–t paths and tectonic history of an early Precambrian granulite facies terrane, Jining district, south-east Inner Mongolia, China

Abstract The widespread khondalite series of south-east Inner Mongolia consists largely of biotite–sillimanite–garnet gneiss and quartzo-feldspathic gneiss with some marble and mafic granulite layers. It has experienced two metamorphic events at c. 2500 and 1900–2000 Ma.
A pre-peak stage of the first metamorphism at T = 600–700°C and P > 6–7 kbar is recognized by the relict amphibolite facies assemblage Ky–Grt–Bt–Pl–Qtz and 'protected'inclusions of biotite, hornblende, sodic plagioclase and quartz in garnet or orthopyroxene. The peak stage, with T = c. 800 ± 50°C and P 8–10 kbar, is characterized by the widespread granulite facies assemblages Sil–Grt–Bt–Kfs–Pl–Qtz in gneiss and Opx–Cpx–Pl ± Hbl ± Grt in granulite. The P–T–t path suggests that the supracrustal sequence was buried in the lower crust by tectonic thickening during D1–D2.
The beginning of the second metamorphism is characterized by further temperature rise to 700°C or more at lower pressure. This stage is manifested by the appearance of cordierite after garnet, fibrolite (Sil2) after biotite in gneiss and transformation of Hbl1 into Opx2 and Cpx2 in granulite. Coronas of symplectitic Opx2 + Pl2 surrounding Grt1 and Cpx1 in mafic granulite are interpreted as products of near-isothermal decompression. The P–T–t path may be related tectonically to waning extension of the crust by the end of the early Proterozoic.     

Evolution of regional metamorphism in the Cape Smith Thrust Belt (northern Quebec, Canada): interaction of tectonic and thermal processes

Abstract Syn-metamorphic re-imbrication of the internal part of thrust belts can result in distinct pressure–temperature–time–deformation ( P–T–t–d ) pathways for different structural–metamorphic domains. In the early Proterozoic Cape Smith Thrust Belt (Canada), an external (piggyback-sequence thrusting) domain is characterized by thermal peak metamorphism occurring after deformation. In contrast, thermal peak metamorphism in an internal domain occurred during re-imbrication by out-of-sequence thrusting. The interactions of tectonic and thermal processes have been studied using three methods: (i) qualitative evaluation of the timing between mineral growth and deformation; (ii) analytical P–T paths from growth-zoned garnet porphyroblasts; and (iii) numerical modelling of vertical heat conduction. Derived P–T–t–d pathways suggest that uplift in the external domain resulted in part from erosion and isostatic unloading. In contrast, paths for the internal domain indicate that the out-of-sequence portion of the thrust belt may have experienced faster unroofing relative to the external domain. This is attributed to thickening by out-of-sequence thrusting and possibly to extensional faulting at (now eroded) higher structural levels. Observations on the timing of metamorphism, coupled with numerical modelling, suggest that the thermal peak metamorphism documented in the external domain is a consequence of the emplacement of the out-of-sequence thrusts stack in the internal portion of the thrust belt.     

Metamorphism and tectonic evolution of the Shangdan fault zone, Shaanxi, China

Abstract The Shangdan fault in the Qinling Orogenic Belt of China is an important boundary between the Caledonian North Qinling Fold Belt and the Hercynian South Qinling Fold Belt. In the Danfeng area, the fault zone strikes WNW–ESE and comprises four strongly deformed zones and three weakly deformed domains parallel to each other. The fault zone has a complex history of multiple deformation and each domain has a different tectonic style that was formed at different stages of the deformation.
The rocks exposed in the weakly deformed domains belong to the Qinling, Danfeng and Liuling Groups. In this paper, the mineral chemistry and mineral assemblages are used to infer the metamorphic conditions and the P–T paths of these units. The metamorphic units in and near the fault zone have different metamorphic conditions and histories that are correlated with the tectonic evolution of the fault zone. Caledonian–Hercynian uplift and southward thrusting of the Proterozoic Qinling Group, over the Danfeng and the Liuling Groups, produced the main metamorphic and tectonic features of the fault zone. Folding of both the Liuling Group and the thrust faults during the Hercynian–Indosinian was accompanied by northward thrusting.     

A Comparison about Metamorphism among the Oldest-Rock Units from Orogenic Belts of Dabie, Eastern Qinling and Eastern Kunlun of Central Mountain Ranges, China

ＴｈｅＣｅｎｔｒａｌＭｏｕｎｔａｉｎＲａｎｇｅｓｏｆＣｈｉｎａ,ｗｈｉｃｈｏｃｕｐｙｔｈｅｃｅｎｔｒａｌｐａｒｔｏｆＣｈｉｎａ,ｃｏｍｐｒｉｓｅｍａｉｎｌｙｔｈｅＤａｂｉｅＭｏｕｎ－ｔａｉｎｓｉｎｔｈｅｅａｓｔ,ｔｈｅＱｉｎｌｉｎｇＭｏｕｎｔａｉｎｓ...     

Low-pressure regional metamorphism in the Omeo Metamorphic Complex, Victoria, Australia

The Omeo Metamorphic Complex forms the southern end of the Wagga Metamorphic Belt, which is the main locus of Palaeozoic low-pressure metamorphism in the Lachlan Fold Belt, south-eastern Australia. It comprises metamorphosed Ordovician quartz-rich turbidites originally derived from Precambrian cratonic rocks. Prograde regional metamorphism occurred in the early Silurian, very soon after sedimentation had ceased. The sequence of metamorphic zones, with increasing grade, is: chlorite, biotite, cordierite, andalusite–K-feldspar and sillimanite–K-feldspar. Migmatites occur in the sillimanite–K-feldspar zone, but large bodies of S-type granite were derived from rocks underlying the exposed Ordovician sequence. P and T estimates for the highest grade rocks are T = 700°C and P = 3.5 kbar, indicating a very high P–T gradient of 65°C/km.
The high heat flow during prograde metamorphism probably resulted from a combination of a thermal anomaly persisting from a pre-metamorphic back-arc basin environment, and intrusion of hot, mantle-derived magmas into the lower and middle crust.
Regional retrograde metamorphism coincided with a general reheating of the crust in the Siluro-Devonian, accompanied by intrusion of many I-type plutons and resetting of the K–Ar dates of some earlier plutons. The Omeo Metamorphic Complex was exposed to erosion at this time.     

Problems with inferring P–T–t paths in low-P granulite facies rocks

Microstructural evidence commonly is used to infer metamorphic reactions, which are used to infer pressure–temperature–time ( P–T–t ) paths. However, this approach in low- P /high- T  (LPHT) granulite facies metamorphic terranes has two main problems. (1) Microstructural evidence may be inconclusive, so that reactions cannot be inferred with confidence. In particular, relative timing of mineral growth inferred from inclusions, moulding relationships and foliation–porphyroblast relationships is commonly ambiguous or invalid. The most reliable indicators of metamorphic reactions are partial pseudomorphs and corona structures, especially if symplectic intergrowths (indicating simultaneous growth of two or more minerals) are involved. (2) Even reactions that can be inferred with confidence do not indicate unique P–T  trends, owing to P–T  slopes of reaction curves. Where successive reactions can be shown to have occurred in the same rock, a line or curve joining reaction-curve intersections gives an apparent single-event path. However, isotopic evidence is needed to prove that polymetamorphism (involving more complex paths making fortuitous intersections with the apparent single-event path) did not occur. Although these problems are well known, their importance is not always emphasized in metamorphic investigations.
The difficulties are illustrated by published work on P–T–t paths for Proterozoic LPHT granulite facies rocks of central Australia and Antarctica. Recent work in Antarctica has shown that P–T–t paths may be episodic and more complex than the simple, single-event paths commonly inferred from microstructural evidence alone.     

Two types of Precambrian high-grade metamorphism, Inner Mongolia, China

Abstract Archaean and Proterozoic granulite facies complexes of Inner Mongolia differ in lithological association, tectonic style, mineral assemblage and metamorphic P–T path. A nearly isobaric cooling path for Archaean high-grade metamorphic rocks is suggested by reaction textures and geothermobarometry. Early Proterozoic metamorphic rocks show nearly isothermal decompression. Archaean metamorphism may have been caused by magmatic accretion, whereas early Proterozoic metamorphism suggests a major continental thickening event followed by exhumation.     

Controls on P–T–t deformation path from amphibole zonation during progressive metamorphism of basic rocks (estuary of the River Vilaine, South Brittany, France)

Abstract Edenite/tremolite and edenite/magnesio-hornblende in equilibrium with plagioclase, chlorite, epidote, quartz and vapour involve several types of reactions for which K _D can be related to T and P. Thermodynamic calculation of these equilibria leads to isopleth systems. Given knowledge of the progressive changes of end-member activities in zoned Ca–Mg amphiboles (based on microprobe analyses), it is possible to construct precise pressure–temperature–time paths ( P–T–t paths) which have been followed by metabasites during polyphase metamorphism. When applied to basic rocks from the River Vilaine area, this method allows us to construct a P–T–t path that can be compared directly to the P–T–t path constructed from interbedded acid rocks (aluminous micaschists) in the same structural unit. Through time, both basic and acid rocks underwent the same complex deformation history that can be described conveniently in the L–S fabric system of Flinn. This allows us to construct a P–T–t deformation path for this structural unit.
These paths are interpreted in terms of an under/overthrusting continental collision belt (the Hercynian belt), and represent an illustration of the time delay caused by stacking of more than two crustal units.     

Contrasting thermomechanical evolutions in the Southalpine metamorphic basement of the Orobic Alps (Central Alps, Italy)

In the Southern Alps a progressive metamorphic zonation, with an increase in the geothermal gradient from NE to SW, has been widely proposed. However, recent investigations have shown that the greenschist metamorphic imprint of the low-grade zone corresponds to a metamorphic retrogression following amphibolite facies conditions. On the other hand, in the medium-grade zone, a later low-pressure, high-temperature (LPHT) metamorphic event has also been proposed. In an attempt to resolve these different interpretations, new petrological and partly new structural data have been obtained for two sectors of the Orobic Alps, traditionally attributed to different metamorphic zones. Thermobarometric determinations, supported by microstructural analysis, indicate the following different pressure-retrograde paths in each sector: (1) in the Val Vedello basement (VVB) rocks, a first metamorphic imprint characterized by P = 7–9 kbar and T = 570–610°C was followed by a greenschist retrogression ( P ≤ 4 kbar and T ≤ 500° C); (2) in the Lario basement (LB) rocks, the first detectable metamorphic stage, characterized by mineral assemblages indicating P = 7–9 kbar and T = 550–630° C, was followed by a LPHT event, synkinematic with F2 extensional deformation. A greenschist retrogression marks the final uplift of these rocks.
Reinterpretation of the available geochronological data indicates a diachronism for the two thermomechanical evolutions. In the light of these data, we interpret the retrograde P–T–t path of the VVB rocks as a pre-Permian post-thickening uplift and the retrograde P–T–t evolution of the LB rocks as a Permo-Mesozoic uplift related to the extensional tectonic regime of the Tethyan rifting.     

Metamorphism of an Early Palaeozoic continental margin, western Baie Verte Peninsula, Newfoundland

Metamorphic mineral assemblages and textures from Early Palaeozoic continental margin rocks in north-western Newfoundland indicate that different structural levels have contrasting metamorphic histories. Rocks of the East Pond Metamorphic Suite, which represent the older, structurally lower level of the margin, experienced an early high-pressure–low-temperature stage of metamorphism (10–12 kbar minimum, 450–500°C) which produced eclogite in mafic dykes and phengite–garnet assemblages in pelites. This was overprinted by higher temperature–lower pressure amphibolite facies metamorphism (700–750°C, 7–9 kbar minimum) which produced complex symplectic textures in rocks of all compositions. Rocks of the Fleur de Lys Supergroup, which were deposited in the stratigraphically higher levels of the rifted margin, reached pressures of 7–8.5 kbar at about 450°C during the early stages of metamorphism, overprinted by assemblages which indicate maximum temperatures of 550–600°C at about 6.5 kbar. The metamorphic history of both units is interpreted to be the result of thermal relaxation following initial burial of a continental margin by overriding thrust sheets. Since there is no evidence that maximum pressures or temperatures within the Fleur de Lys Supergroup were ever as high as those reached in the East Pond Metamorphic Suite, these rocks may have followed parallel, 'nested' P–T–t paths, with the more deeply buried East Pond Metamorphic Suite subjected to greater thermal relaxation effects. Quantitative modelling of P–T–t paths is not possible with the present data, owing to both large uncertainties in P–T estimates, and in the time of metamorphism.     

Proterozoic low-pressure/high-temperature metamorphism and an anticlockwise P–T–t path for the Hazeldene area, Mount Isa Inlier, Queensland, Australia

In the Hazeldene area, situated in the Mount Isa Inlier, Queensland, the metamorphic grade changes from chlorite zone, through biotite and cordierite zones, to sillimanite/K-feldspar zone.
Microstructural studies of rocks near the sillimanite isograd demonstrate that cordierite grew early during the development of a steep foliation (S2), was replaced by biotite, andalusite and sillimanite at the metamorphic peak late in S2, and in turn by kyanite + chlorite adjacent to localized small post-D2 shear zones. Although the anticlockwise P–T–t path is well defined, the precise P–T conditions are uncertain because of problems with experimental and thermodynamic data. The best estimate for the metamorphic peak for rocks close to the sillimanite isograd is around 600° C at 4 kbar.
The metamorphism has been dated at 1544 Ma, and was synchronous with a major crustal shortening event. Because proposed extensional events occurred more than 60 Ma earlier, their contribution to the peak metamorphic thermal perturbation would have been insignificant. The syn-metamorphic Mica Creek Pegmatites, the abundance of high heat-producing elements in the nearby pre-D2 Sybella Granite, and advective heat by fluids which caused considerable metasomatism in the Hazeldene area, may have each contributed to the thermal budget. However, the metamorphic thermal gradient may be 80°C km^-1 or higher, strongly suggesting a local magmatic control. As none are known in the area, such syn-metamorphic plutons would have to lie beneath the exposed high-grade rocks.     

Progressive sequence of reactions of the Ryoke metamorphism in the Yanai district, southwest Japan: the formation of cordierite

The compositions of biotite and muscovite were examined in terms of the paragenesis and the metamorphic grade in low- to medium-grade pelitic rocks of the Ryoke metamorphism in the Yanai district, southwest Japan. The biotite and muscovite that coexist with K-feldspar have a higher K component in an A'KF diagram than those in rocks lacking K-feldspar. This fact reflects an increase in the K₂O content in muscovite, but in biotite it reflects an increase of not only the K₂O content but also of the octahedral vacancy.
At higher metamorphic grade beyond the cordierite isograd, where cordierite coexists with neither chlorite nor K-feldspar, the biotite shows an increase in illite, K Aliv □xii−1 Si−1, and Tschermak components, Alvi Aliv R+−1 Si−1, where □xii and R+ denote the interlayer vacancy and (Fe+Mg+Mn), respectively. A reaction to define the cordierite isograd is proposed by treating this chemical change as being responsible for the first appearance of cordierite, i.e. K,Al-poor biotite+phengitic muscovite=K,Al-rich biotite+cordierite+quartz+water .By treating this as a key reaction in medium-grade metamorphism, a set of reaction in a progressive metamorphism is established for the Ryoke metamorphism, a typical low-pressure type metamorphism. Some textures in one of the high-grade areas, the K-feldspar-cordierite zone, suggest that a further two prograde reactions have taken place, i.e. andalusite+biotite+quartz=cordierite+K-feldspar+water
and   andalusite=sillimanite.quartz=cordierite+K-feldspar+water
This implies that this zone probably has a P–T  path involving isobaric heating.     

Crustal trajectory of sapphirine-bearing granulites from Ganguvarpatti, South India: evidence for an isothermal decompression path

Abstract Ganguvarpatti is part of a Precambrian terrane characterized by granulite facies rocks, including charnockites, mafic granulites, sapphirine-bearing granulites, leptynites and gneisses. A sequence of reactions deduced from the multiphase reaction textures provide information on the metamorphic history of this area, as they formed in response to decompression during uplift. Geothermobarometry and constraints from reaction textures define a segment of a P–T path traversed by the granulites of Ganguvarpatti. Near-peak metamorphic conditions of c. 800°C and 8 kbar were succeeded by a symplectitic stage at a significantly lower pressure ( c. 700°C and 4.5 kbar), documenting a nearly isothermal decompression P–T path and rapid uplift ( c. 12 km) followed by cooling. The presence of many fluid inclusions of extremely low density in the charnockites is consistent with a nearly isothermal uplift path. Attainment of a maximum pressure of c. 8 kbar indicates c. 27 km depth of burial during metamorphism. This would imply a total crustal thickness of c. 65–70 km at 2.6–2.5 Ga. Such a profound crustal thickness and a clockwise decompressive P–T path is interpreted as a consequence of tectonic thickening of crust, accomplished by collision tectonics of the southern granulite terrane against the Dharwar craton along the Palghat–Cauvery shear zone via northward subduction.     

Exhumation during oblique transpression: The Feiran–Solaf region, Egypt

The Feiran–Solaf metamorphic complex of Sinai, Egypt, is one of the highest grade metamorphic complexes of a series of basement domes that crop out throughout the Arabian-Nubian Shield. In the Eastern Desert of Egypt these basement domes have been interpreted as metamorphic core complexes exhumed in extensional settings. For the Feiran–Solaf complex an interpretation of the exhumation mechanism is difficult to obtain with structural arguments as all of its margins are obliterated by post-tectonic granites. Here, metamorphic methods are used to investigate its tectonic history and show that the complex was characterized by a single metamorphic cycle experiencing peak metamorphism at ∼700–750 °C and 7–8 kbar and subsequent isothermal decompression to ∼4–5 kbar, followed by near isobaric cooling to 450 °C. Correlation of this metamorphic evolution with the deformation history shows that peak metamorphism occurred prior to the compressive deformation phase D ₂, while the compressive D ₂ and D ₃ deformation occurred during the near isothermal decompression phase of the P–T loop. We interpret the concurrence of decompression of the P–T path and compression by structural shortening as evidence for the Najd fault system exhuming the complex in an oblique transpressive regime. However, final exhumation from ∼15 km depth must have occurred due to an unrelated mechanism.     

The (Na–Ca)amphibole–albite–chlorite–epidote–quartz geothermobarometer in the system S–A–F–M–C–N–H2O. 2. Applications to metabasic rocks in different metamorphic settings

In order to illustrate different applications of the amphibole-albite-chlorite-epidote-quartz geothermobarometer, pressure-temperature-time ( P–T–t ) ± space ( P–T–t–s ) ± deformation ( P–T–t–d ) paths have been established from literature data. They are discussed as a function of the chemical, equilibrium and microstructural data available in each case, and compared with the conclusions already established by other methods. It is clear that it is necessary to know the relative chronology of the events (directions of zoning of minerals in successive microstructural positions) to establish precise P–T paths; this enables reconstruction of complex geodynamic histories. From this point of view, it is necessary to analyse the maximum possible number of minerals in a few well-chosen metabasic rocks showing different generations of blastesis. The rocks should belong to different tectonic units to obtain the best overall picture of a metamorphic complex.     

Reactions to define the biotite isograd in the Ryoke metamorphic belt,Kii Peninsula,Japan

Two types of biotite isograd are defined in the low-grade metamorphism of the Wazuka area, a Ryoke metamorphic terrain in the Kii Peninsula, Japan. The first, BI₁, is defined by the reaction of chlorite+K-feldspar= biotite+muscovite+quartz+H₂O that took place in psammitic rocks, and the second, BI₂, by the continuous reaction between muscovite, chlorite, biotite and quartz in pelitic rocks. The Fe/Mg ratios of the host rocks do not significantly affect the reactions. From the paragenesis of pelitic and psammitic metamorphic rocks, the following mineral zones were established for this low-pressure regional metamorphic terrain: chlorite, transitional, chlorite-biotite, biotite, and sillimanite. The celadonite content of muscovite solid solution in pelitic rocks decreases systematically with the grade of metamorphism from 38% in the chlorite zone to 11% in the biotite zone. Low pressure does not prohibit muscovite from showing the progressive change of composition, if only rocks with appropriate paragenesis are chosen. A qualitative phase diagram of the AKF system relevant to biotite formation suggests that the higher the pressure of metamorphism, the higher the celadonite content of muscovite at BI₁, which is confirmed by comparing the muscovites from the Barrovian and Ryoke metamorphism.     

Early Mesozoic magmatism and tectonic evolution of the Qinling Orogen: Implications for oblique continental collision

The Qinling Orogenic Belt in Central China is formed by an oblique continental collision between the North China and South China Blocks. In this review, we summarize the knowledge of the early Mesozoic magmatism, in combination with the coeval metamorphic characteristics, regional structural features and depositional history in the foreland and hinterland basins along the Qinling-Dabie Orogen. The early Mesozoic tectonic evolution of the Qinling is divided into four stages. Stage I (~250–235 Ma) is characterized by medium-K calc-alkaline magmatism in the western Qinling induced by slab roll-back. Meanwhile, ultrahigh-pressure metamorphism was triggered by continental subduction in the Sulu-Dabie, indicating a diachronous closure of the ocean. Stage II (~235–225 Ma) is recognized as a magmatic gap. Depositional variations of sedimentary facies and compressional deformations with an increased crustal thickness reflect the initial collision in the Qinling. Stage III (~225–210 Ma) is distinguished by a magmatic flare-up event. Abundant mantle-derived melts coupled with extensive crustal-derived melts were coeval with rapid uplift, strike-slip movement and regional crustal thickening in the Qinling as well as retrograde metamorphism in the Sulu-Dabie. The main tectonic driver was the propagating detachment of the subducted oceanic slab at gradually shallower depth from the Sulu-Dabie to the Qinling. Stage IV (~210–190 Ma) magmatism is dominated by high silica granites derived from metasedimentary rocks. The rapid denudation rates and extensional structures indicate gravitational collapse and regional delamination of the thickened crust. In addition to the strike-slip faults and block extrusion, the Qinling is characterized by asymmetric distribution patterns of magmatism and metamorphism, different melting mechanisms over time; diachronous depositions, differential uplift and non-uniform crustal thickening, and regional delamination of the thickened orogenic root. All these features are the result of the oblique collision, which is a common process in nature, and therefore could be applied to other orogens.     

Caledonian high-pressure metamorphism in the Strona-Ceneri Zone (Southern Alps of southern Switzerland and northern Italy)

The Strona-Ceneri Zone comprises a succession of polymetamorphic, pre-Alpidic basement rocks including ortho- and paragneisses, metasedimentary schists, amphibolites, and eclogites. The rock pile represents a Late Proterozoic or Palaeozoic subduction accretion complex that was intruded by Ordovician granitoids. Eclogites, which occur as lenses within the ortho-paragneiss succession and as xenoliths within the granitoids record a subduction related high-pressure event (D1) with peak metamorphic conditions of 710 ± 30 °C at 21.0 ± 2.5 kbar. After isothermal uplift, the eclogites experienced a Barrowtype (D2) tectonometamorphic overprint under amphibolite facies conditions (570-630 °C, 7-9 kbar). U-Pb dating on zircon of the eclogites gives a metamorphic age of 457 ± 5 Ma, and syn-eclogite facies rutile gives a ²⁰⁶Pb/²³⁸U age of 443 ± 19 Ma classifying the subduction as a Caledonian event. These data show that the main tectonometamorphic evolution of the Strona-Ceneri Zone most probably took place in a convergent margin scenario, in which accretion, eclogitization of MOR-basalt, polyphase (D1 and D2) deformation, anatexis and magmatism all occurred during the Ordovician. Caledonian high-pressure metamorphism, subsequent magmatism and Barrow-type metamorphism are believed to be related to subduction and collision within the northern margin of Gondwana. Editorial handling: Edwin Gnos