National-scale data-driven rainfall induced landslide susceptibility mapping for China by accounting for incomplete landslide data

China is one of the countries where landslides caused the most fatalities in the last decades.The threat that landslide disasters pose to people might even be greater in the future,due to climate change and the increasing urbanization of mountainous areas.A reliable national-scale rainfall induced landslide suscep-tibility model is therefore of great relevance in order to identify regions more and less prone to landslid-ing as well as to develop suitable risk mitigating strategies.However,relying on imperfect landslide data is inevitable when modelling landslide susceptibility for such a large research area.The purpose of this study is to investigate the influence of incomplete landslide data on national scale statistical landslide susceptibility modeling for China.In this context,it is aimed to explore the benefit of mixed effects mod-elling to counterbalance associated bias propagations.Six influencing factors including lithology,slope,soil moisture index,mean annual precipitation,land use and geological environment regions were selected based on an initial exploratory data analysis.Three sets of influencing variables were designed to represent different solutions to deal with spatially incomplete landslide information:Set 1(disregards the presence of incomplete landslide information),Set 2(excludes factors related to the incompleteness of landslide data),Set 3(accounts for factors related to the incompleteness via random effects).The vari-able sets were then introduced in a generalized additive model(GAM:Set 1 and Set 2)and a generalized additive mixed effect model(GAMM:Set 3)to establish three national-scale statistical landslide suscep-tibility models:models 1,2 and 3.The models were evaluated using the area under the receiver operating characteristics curve(AUROC)given by spatially explicit and non-spatial cross-validation.The spatial pre-diction pattern produced by the models were also investigated.The results show that the landslide inven-tory incompleteness had a substantial impact on the outcomes of the statistical landslide susceptibility models.The cross-validation results provided evidence that the three established models performed well to predict model-independent landslide information with median AUROCs ranging from 0.8 to 0.9.However,although Model 1 reached the highest AUROCs within non-spatial cross-validation(median of 0.9),it was not associated with the most plausible representation of landslide susceptibility.The Model 1 modelling results were inconsistent with geomorphological process knowledge and reflected a large extent the underlying data bias.The Model 2 susceptibility maps provided a less biased picture of landslide susceptibility.However,a lower predicted likelihood of landslide occurrence still existed in areas known to be underrepresented in terms of landslide data(e.g.,the Kuenlun Mountains in the northern Tibetan Plateau).The non-linear mixed-effects model(Model 3)reduced the impact of these biases best by introducing bias-describing variables as random effects.Among the three models,Model 3 was selected as the best national-scale susceptibility model for China as it produced the most plausible portray of rainfall induced landslide susceptibility and the highest spatially explicit predictive perfor-mance(median AUROC of spatial cross validation 0.84)compared to the other two models(median AUROCs of 0.81 and 0.79,respectively).We conclude that ignoring landslide inventory-based incomplete-ness can entail misleading modelling results and that the application of non-linear mixed-effect models can reduce the propagation of such biases into the final results for very large areas.     

Statistical modelling of Europe-wide landslide susceptibility using limited landslide inventory data

In many regions, the absence of a landslide inventory hampers the production of susceptibility or hazard maps. Therefore, a method combining a procedure for sampling of landslide-affected and landslide-free grid cells from a limited landslide inventory and logistic regression modelling was tested for susceptibility mapping of slide- and flow-type landslides on a European scale. Landslide inventories were available for Norway, Campania (Italy), and the Barcelonnette Basin (France), and from each inventory, a random subsample was extracted. In addition, a landslide dataset was produced from the analysis of Google Earth images in combination with the extraction of landslide locations reported in scientific publications. Attention was paid to have a representative distribution of landslides over Europe. In total, the landslide-affected sample contained 1,340 landslides. Then a procedure to select landslide-free grid cells was designed taking account of the incompleteness of the landslide inventory and the high proportion of flat areas in Europe. Using stepwise logistic regression, a model including slope gradient, standard deviation of slope gradient, lithology, soil, and land cover type was calibrated. The classified susceptibility map produced from the model was then validated by visual comparison with national landslide inventory or susceptibility maps available from literature. A quantitative validation was only possible for Norway, Spain, and two regions in Italy. The first results are promising and suggest that, with regard to preparedness for and response to landslide disasters, the method can be used for urgently required landslide susceptibility mapping in regions where currently only sparse landslide inventory data are available.     

Regional-scale landslide activity and landslide susceptibility zonation in the Nepal Himalaya

Landslide susceptibility zonation mapping is a fundamental procedure for geo-disaster management in tropical and sub-tropical regions. Recently, various landslide susceptibility zonation models have been introduced in Nepal with diverse approaches of assessment. However, validation is still a problem. Additionally, the role of various predisposing causative parameters for landslide activity is still not well understood in the Nepal Himalaya. To address these issues of susceptibility zonation and landslide activity, about 4,000 km² area of central Nepal was selected for regional-scale assessment of landslide activity and susceptibility zonation mapping. In total, 655 new landslides and 9,229 old landslides were identified with the study area with the help of satellite images, aerial photographs, field data and available reports. The old landslide inventory was “blind landslide database” and could not explain the particular rainfall event responsible for the particular landslide. But considering size of the landslide, blind landslide inventory was reclassified into two databases: short-duration high-intensity rainfall-induced landslide inventory and long-duration low-intensity rainfall-induced landslide inventory. These landslide inventory maps were considered as proxy maps of multiple rainfall event-based landslide inventories. Similarly, all 9,884 landslides were considered for the activity assessment of predisposing causative parameters. For the Nepal Himalaya, slope, slope aspect, geology and road construction activity (anthropogenic cause) were identified as most affective predisposing causative parameters for landslide activity. For susceptibility zonation, multivariate approach was considered and two proxy rainfall event-based landslide databases were used for the logistic regression modelling, while a relatively recent landslide database was used in validation. Two event-based susceptibility zonation maps were merged and rectified to prepare the final susceptibility zonation map and its prediction rate was found to be more than 82 %. From this work, it is concluded that rectification of susceptibility zonation map is very appropriate and reliable. The results of this research contribute to a significant improvement in landslide inventory preparation procedure, susceptibility zonation mapping approaches as well as role of various predisposing causative parameters for the landslide activity.     

GIS-based weights-of-evidence modelling of rainfall-induced landslides in small catchments for landslide susceptibility mapping

Landslide susceptibility mapping is a vital tool for disaster management and planning development activities in mountainous terrains of tropical and subtropical environments. In this paper, the weights-of-evidence modelling was applied, within a geographical information system (GIS), to derive landslide susceptibility map of two small catchments of Shikoku, Japan. The objective of this paper is to evaluate the importance of weights-of-evidence modelling in the generation of landslide susceptibility maps in relatively small catchments having an area less than 4 sq km. For the study area in Moriyuki and Monnyu catchments, northeast Shikoku Island in west Japan, a data set was generated at scale 1:5,000. Relevant thematic maps representing various factors (e.g. slope, aspect, relief, flow accumulation, soil depth, soil type, land use and distance to road) that are related to landslide activity were generated using field data and GIS techniques. Both catchments have homogeneous geology and only consist of Cretaceous granitic rock. Thus, bedrock geology was not considered in data layering during GIS analysis. Success rates were also estimated to evaluate the accuracy of landslide susceptibility maps and the weights-of-evidence modelling was found useful in landslide susceptibility mapping of small catchments.     

Ensemble-based landslide susceptibility maps in Jinbu area, Korea

Ensemble techniques were developed, applied and validated for the analysis of landslide susceptibility in Jinbu area, Korea using the geographic information system (GIS). Landslide-occurrence areas were detected in the study by interpreting aerial photographs and field survey data. Landslide locations were randomly selected in a 70/30 ratio for training and validation of the models, respectively. Topography, geology, soil and forest databases were also constructed. Maps relevant to landslide occurrence were assembled in a spatial database. Using the constructed spatial database, 17 landslide-related factors were extracted. The relationships between the detected landslide locations and the factors were identified and quantified by frequency ratio, weight of evidence, logistic regression and artificial neural network models and their ensemble models. The relationships were used as factor ratings in the overlay analysis to create landslide susceptibility indexes and maps. Then, the four landslide susceptibility maps were used as new input factors and integrated using the frequency ratio, weight of evidence, logistic regression and artificial neural network models as ensemble methods to make better susceptibility maps. All of the susceptibility maps were validated by comparison with known landslide locations that were not used directly in the analysis. As the result, the ensemble-based landslide susceptibility map that used the new landslide-related input factor maps showed better accuracy (87.11% in frequency ratio, 83.14% in weight of evidence, 87.79% in logistic regression and 84.54% in artificial neural network) than the individual landslide susceptibility maps (84.94% in frequency ratio, 82.82% in weight of evidence, 87.72% in logistic regression and 81.44% in artificial neural network). All accuracy assessments showed overall satisfactory agreement of more than 80%. The ensemble model was found to be more effective in terms of prediction accuracy than the individual model.     

Validation and evaluation of two multivariate statistical models for predictive shallow landslide susceptibility mapping of the Eastern Pyrenees (Spain)

This paper deals with the quality of two multivariate statistical models based on the Geographical Information System for shallow landslide susceptibility assessment in a test area at La Pobla de Lillet (Eastern Pyrenees, Spain). The quality, which was guaranteed by a rigorous methodology based on a suitable diagnosis, validation, and evaluation of the models, ensured a reliable contrast of the final susceptibility maps. This enables us to transfer the best results to the end user. Landslide susceptibility models were carried out by logistic regression and discriminant analysis of the significant conditioning factors related to the characteristics of the slope and the upslope contributing area captured from the digital elevation model and landslide distribution. The explanatory variables were tested (KS test, principal components and one-way and T-test) to select the most statistically significant ones before being introduced into the logistic and discriminant analyses. Accuracy statistics and the receiver operating characteristic curve used for diagnosis and validation showed similar prediction skills and a good fit to the data with more than 85% of unfailed cells properly classified for the two models. The evaluation of the study area and the correlation function (R ² = 0.83) between the models revealed that the discriminant model overestimated the susceptibility of the most stable zones with respect to the logistic model. Different methods of producing susceptibility maps showed marked differences in matching the models. Substantial spatial agreement (Kappa = 0.741) between binary maps produced by the standard cut-off value descended moderately (Kappa = 0.540) as a result of superimposing maps with five susceptibility levels defined by landslide percentage. Despite the fact that the two statistical models are similar in assessing susceptibility in the study area, the implications for hazard and risk management can be different because of the conservative nature of the discriminant model.     

Uncertainty pattern in landslide susceptibility prediction modelling: Effects of different landslide boundaries and spatial shape expressions

In some studies on landslide susceptibility mapping (LSM), landslide boundary and spatial shape characteristics have been expressed in the form of points or circles in the landslide inventory instead of the accurate polygon form. Different expressions of landslide boundaries and spatial shapes may lead to substantial differences in the distribution of predicted landslide susceptibility indexes (LSIs); moreover, the presence of irregular landslide boundaries and spatial shapes introduces uncertainties into the LSM. To address this issue by accurately drawing polygonal boundaries based on LSM, the uncertainty patterns of LSM modelling under two different landslide boundaries and spatial shapes, such as landslide points and circles, are compared. Within the research area of Ruijin City in China, a total of 370 landslides with accurate boundary information are obtained, and 10 environmental factors, such as slope and lithology, are selected. Then, correlation analyses between the landslide boundary shapes and selected environmental factors are performed via the frequency ratio (FR) method. Next, a support vector machine (SVM) and random forest (RF) based on landslide points, circles and accurate landslide polygons are constructed as point-, circle- and polygon-based SVM and RF models, respectively, to address LSM. Finally, the prediction capabilities of the above models are compared by computing their statistical accuracy using receiver operating characteristic analysis, and the uncertainties of the predicted LSIs under the above models are discussed. The results show that using polygonal surfaces with a higher reliability and accuracy to express the landslide boundary and spatial shape can provide a markedly improved LSM accuracy, compared to those based on the points and circles. Moreover, a higher degree of uncertainty of LSM modelling is present in the expression of points because there are too few grid units acting as model input variables. Additionally, the expression of the landslide boundary as circles introduces errors in measurement and is not as accurate as the polygonal boundary in most LSM modelling cases. In addition, the results under different conditions show that the polygon-based models have a higher LSM accuracy, with lower mean values and larger standard deviations compared with the point- and circle-based models. Finally, the overall LSM accuracy of the RF is superior to that of the SVM, and similar patterns of landslide boundary and spatial shape affecting the LSM modelling are reflected in the SVM and RF models.     

Use of GIS-based fuzzy logic relations and its cross application to produce landslide susceptibility maps in three test areas in Malaysia

Landslides are one of the most frequent and common natural hazards in Malaysia. Preparation of landslide susceptibility maps is one of the first and most important steps in the landslide hazard mitigation. However, due to complex nature of landslides, producing a reliable susceptibility map is not easy. For this reason, a number of different approaches have been used, including direct and indirect heuristic approaches, deterministic, probabilistic, statistical, and data mining approaches. Moreover, these landslides can be systematically assessed and mapped through a traditional mapping framework using geoinformation technologies. Since the early 1990s, several mathematical models have been developed and applied to landslide hazard mapping using geographic information system (GIS). Among various approaches, fuzzy logic relation for mapping landslide susceptibility is one of the techniques that allows to describe the role of each predisposing factor (landslide-conditioning parameters) and their optimal combination. This paper presents a new attempt at landslide susceptibility mapping using fuzzy logic relations and their cross application of membership values to three study areas in Malaysia using a GIS. The possibility of capturing the judgment and the modeling of conditioning factors are the main advantages of using fuzzy logic. These models are capable to capture the conditioning factors directly affecting the landslides and also the inter-relationship among them. In the first stage of the study, a landslide inventory was complied for each of the three study areas using both field surveys and airphoto studies. Using total 12 topographic and lithological variables, landslide susceptibility models were developed using the fuzzy logic approach. Then the landslide inventory and the parameter maps were analyzed together using the fuzzy relations and the landslide susceptibility maps produced. Finally, the prediction performance of the susceptibility maps was checked by considering field-verified landslide locations in the studied areas. Further, the susceptibility maps were validated using the receiver-operating characteristics (ROC) success rate curves. The ROC curve technique is based on plotting model sensitivity—true positive fraction values calculated for different threshold values versus model specificity—true negative fraction values on a graph. The ROC curves were calculated for the landslide susceptibility maps obtained from the application and cross application of fuzzy logic relations. Qualitatively, the produced landslide susceptibility maps showed greater than 82% landslide susceptibility in all nine cases. The results indicated that, when compared with the landslide susceptibility maps, the landslides identified in the study areas were found to be located in the very high and high susceptibility zones. This shows that as far as the performance of the fuzzy logic relation approach is concerned, the results appeared to be quite satisfactory, the zones determined on the map being zones of relative susceptibility.     

GIS-based landslide susceptibility mapping using bivariate statistical analysis in Devrek (Zonguldak-Turkey)

Devrek town with increasing population is located in a hillslope area where some landslides exist. Therefore, landslide susceptibility map of the area is required. The purpose of this study was to generate a landslide susceptibility map using a bivariate statistical index and evaluate and compare the results of the statistical analysis conducted with three different approaches in seed cell concept resulting in different data sets in Geographical Information Systems (GIS) based landslide susceptibility mapping applied to the Devrek region. The data sets are created from the seed cells of (a) crowns and flanks, (b) only crowns, and (c) only flanks of the landslides by using ten different causative parameters of the study area. To increase the data dependency of the analysis, all parameter maps are classified into equal frequency classes based directly on the percentile divisions of each corresponding seed cell data set. The resultant maps of the landslide susceptibility analysis indicate that all data sets produce fairly acceptable results. In each data set analysis, elevation, lithology, slope, aspect, and drainage density parameters are found to be the most contributing factors in landslide occurrences. The results of the three data sets are compared using Seed Cell Area Indexes (SCAI). This comparison shows that the crown data set produces the most accurate and successful landslide susceptibility map of the study area.     

Quantitative landslide susceptibility mapping at Pemalang area,Indonesia

For quantitative landslide susceptibility mapping, this study applied and verified a frequency ratio, logistic regression, and artificial neural network models to Pemalang area, Indonesia, using a Geographic Information System (GIS). Landslide locations were identified in the study area from interpretation of aerial photographs, satellite imagery, and field surveys; a spatial database was constructed from topographic and geological maps. The factors that influence landslide occurrence, such as slope gradient, slope aspect, curvature of topography, and distance from stream, were calculated from the topographic database. Lithology was extracted and calculated from geologic database. Using these factors, landslide susceptibility indexes were calculated by frequency ratio, logistic regression, and artificial neural network models. Then the landslide susceptibility maps were verified and compared with known landslide locations. The logistic regression model (accuracy 87.36%) had higher prediction accuracy than the frequency ratio (85.60%) and artificial neural network (81.70%) models. The models can be used to reduce hazards associated with landslides and to land-use planning.     

Mapping landslide susceptibility with logistic regression, multiple adaptive regression splines, classification and regression trees, and maximum entropy methods: a comparative study

Four statistical techniques for modelling landslide susceptibility were compared: multiple logistic regression (MLR), multivariate adaptive regression splines (MARS), classification and regression trees (CART), and maximum entropy (MAXENT). According to the literature, MARS and MAXENT have never been used in landslide susceptibility modelling, and CART has been used only twice. Twenty independent variables were used as predictors, including lithology as a categorical variable. Two sets of random samples were used, for a total of 90 model replicates (with and without lithology, and with different proportions of positive and negative data). The model performance was evaluated using the area under the receiver operating characteristic curve (AUC) statistic. The main results are (a) the inclusion of lithology improves the model performance; (b) the best AUC values for single models are MLR (0.76), MARS (0.76), CART (0.77), and MAXENT (0.78); (c) a smaller amount of negative data provides better results; (d) the models with the highest prediction capability are obtained with MAXENT and CART; and (e) the combination of different models is a way to evaluate the model reliability. We further discuss some key issues in landslide modelling, including the influence of the various methods that we used, the sample size, and the random replicate procedures.     

Development of hybrid wavelet packet-statistical models (WP-SM) for landslide susceptibility mapping

Landslides are recognized as one of the most important natural hazards in many areas throughout the world. Producing landslide susceptibility maps have received particular attention from a wide range of scientists. The main objective of this study was to produce landslide susceptibility maps using hybrid wavelet packet-statistical models (WP-SM). In the first step, landslide susceptibility maps were produced using single artificial neural network (ANN), support vector machine (SVM), maximum entropy (MaxEnt), and generalized linear model (GLM). In the next step, the input maps were preprocessed using different mother wavelets in different levels. Then, the hybrid models were developed using the wavelet-based preprocessed maps. Results showed that the wavelet packet transform can be effectively used to produce precise landslide susceptibility maps. It was shown that wavelet packet transform significantly enhanced the ability of the single statistical models. The kappa coefficients were increased from 0.829 to 0.941, 0.846 to 0.978, 0.744 to 0.829, and 0.735 to 0.817 in hybrid ANN, SVM, MaxEnt, and GLM, respectively. The best wavelet transform was performed using bior1.5 with a three-level decomposition. It was also recognized that MaxEnt and GLM produced approximately poor results. However, SVM performed better than the other three models both in single and hybrid forms. ANN also outperformed MaxEnt and GLM models. Spatial distribution of the susceptible area is consistent with the observed landslide distribution pattern particularly in maps obtained from the hybrid models. The produced maps showed that the general pattern of susceptible area intensively followed the pattern of roads and sensitive geological formations.     

The influence of systematically incomplete shallow landslide inventories on statistical susceptibility models and suggestions for improvements

Complete landslide inventories are rarely available. The objectives of this study were to (i) elaborate the influence of incomplete landslide inventories on statistical landslide susceptibility models and to (ii) propose suitable modelling strategies that can reduce the effects of inventory-based incompleteness. In this context, we examined whether the application of a novel statistical approach, namely mixed-effects models, enables predictions that are less influenced by such inventory-based errors.The study was conducted for (i) an area located in eastern Austria and (ii) a synthetically generated data set. The applied methodology consisted of a simulation of two different inventory-based biases and an in-depth evaluation of subsequent modelling results. Inventory-based errors were simulated by gradually removing landslide data within forests and selected municipalities. The resulting differently biased inventories were introduced into logistic regression models while we considered the effects of including or excluding predictors that are directly related to the respective inventory-based bias. Mixed-effects logistic regression was used to account for variation that was due to an inventory-based incompleteness.The results show that most erroneous predictions, but highest predictive performances, were obtained from models generated with highly incomplete inventories and predictors that were able to directly describe the respective incompleteness. An exclusion of such bias-describing predictors led to systematically confounded relationships. The application of mixed-effects models proved valuable to produce predictions that were least affected by inventory-based errors.This paper highlights that the degree of inventory-based incompleteness is only one of several aspects that determine how an inventory-based bias may propagate into the final results. We propose a four-step procedure to deal with incomplete inventories in the context of statistical landslide susceptibility modelling.     

Combining landslide susceptibility maps obtained from frequency ratio,logistic regression,and artificial neural network models using ASTER images and GIS

Landslide-related factors were extracted from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) images, and integrated techniques were developed, applied, and verified for the analysis of landslide susceptibility in Boun, Korea, using a geographic information system (GIS). Digital elevation model (DEM), lineament, normalized difference vegetation index (NDVI), and land-cover factors were extracted from the ASTER images for analysis. Slope, aspect, and curvature were calculated from a DEM topographic database. Using the constructed spatial database, the relationships between the detected landslide locations and six related factors were identified and quantified using frequency ratio (FR), logistic regression (LR), and artificial neural network (ANN) models. These relationships were used as factor ratings in an overlay analysis to create landslide susceptibility indices and maps. Three landslide susceptibility maps were then combined and applied as new input factors in the FR, LR, and ANN models to make improved susceptibility maps. All of the susceptibility maps were verified by comparison with known landslide locations not used for training the models. The combined landslide susceptibility maps created using three landslide-related input factors showed improved accuracy (87.00% in FR, 88.21% in LR, and 86.51% in ANN models) compared to the individual landslide susceptibility maps (84.34% in FR, 85.40% in LR, and 74.29% in ANN models) generated using the six factors from the ASTER images.     

Improvement of statistical landslide susceptibility mapping by using spatial and global regression methods in the case of More and Romsdal (Norway)

Statistical models are one of the most preferred methods among many landslide susceptibility assessment methods. As landslide occurrences and influencing factors have spatial variations, global models like neural network or logistic regression (LR) ignore spatial dependence or autocorrelation characteristics of data between the observations in susceptibility assessment. However, to assess the probability of landslide within a specified period of time and within a given area, it is important to understand the spatial correlation between landslide occurrences and influencing factors. By including these relations, the predictive ability of the developed model increases. In this respect, spatial regression (SR) and geographically weighted regression (GWR) techniques, which consider spatial variability in the parameters, are proposed in this study for landslide hazard assessment to provide better realistic representations of landslide susceptibility. The proposed model was implemented to a case study area from More and Romsdal region of Norway. Topographic (morphometric) parameters (slope angle, slope aspect, curvature, plan, and profile curvatures), geological parameters (geological formations, tectonic uplift, and lineaments), land cover parameter (vegetation coverage), and triggering factor (precipitation) were considered as landslide influencing factors. These influencing factors together with past rock avalanche inventory in the study region were considered to obtain landslide susceptibility maps by using SR and LR models. The comparisons of susceptibility maps obtained from SR and LR show that SR models have higher predictive performance. In addition, the performances of SR and LR models at the local scale were investigated by finding the differences between GWR and SR and GWR and LR maps. These maps which can be named as comparison maps help to understand how the models estimate the coefficients at local scale. In this way, the regions where SR and LR models over or under estimate the landslide hazard potential were identified.     

Evaluation and comparison of GIS based landslide susceptibility mapping procedures in Kulekhani watershed, Nepal

The goal of this paper is to evaluate and compare the consistency of GIS-based heuristic and bivariate landslide susceptibility mapping techniques in the Himalayan region, taking the Kulekhani watershed of central Nepal as an example. For this purpose, a heuristic and two statistical bivariate landslide susceptibility mapping methods are applied, and three separate landslide susceptibility zonation maps are produced. The maps are compared using three approaches: landslide density analysis, success rate analysis, and agreed area analysis. A comparison of the values obtained from landslide density analysis and the curves of success rate analysis indicate that the two bivariate methods produce almost identical results, whereas the map produced with the heuristic method differs significantly from the others. On the other hand, the agreed area analysis highlights significant spatial differences in the maps obtained from the three methods. Although the three approaches evaluate the consistency of susceptibility maps, only the agreed area analysis is capable of spatially comparing them. Hence, this approach proves to be more suitable for spatially and quantitatively evaluating the consistency of various landslide susceptibility zonation maps.     

GIS-based landslide susceptibility mapping with probabilistic likelihood ratio and spatial multi-criteria evaluation models (North of Tehran,Iran)

The aim of this study is to produce landslide susceptibility mapping by probabilistic likelihood ratio (PLR) and spatial multi-criteria evaluation (SMCE) models based on geographic information system (GIS) in the north of Tehran metropolitan, Iran. The landslide locations in the study area were identified by interpretation of aerial photographs, satellite images, and field surveys. In order to generate the necessary factors for the SMCE approach, remote sensing and GIS integrated techniques were applied in the study area. Conditioning factors such as slope degree, slope aspect, altitude, plan curvature, profile curvature, surface area ratio, topographic position index, topographic wetness index, stream power index, slope length, lithology, land use, normalized difference vegetation index, distance from faults, distance from rivers, distance from roads, and drainage density are used for landslide susceptibility mapping. Of 528 landslide locations, 70 % were used in landslide susceptibility mapping, and the remaining 30 % were used for validation of the maps. Using the above conditioning factors, landslide susceptibility was calculated using SMCE and PLR models, and the results were plotted in ILWIS-GIS. Finally, the two landslide susceptibility maps were validated using receiver operating characteristic curves and seed cell area index methods. The validation results showed that area under the curve for SMCE and PLR models is 76.16 and 80.98 %, respectively. The results obtained in this study also showed that the probabilistic likelihood ratio model performed slightly better than the spatial multi-criteria evaluation. These landslide susceptibility maps can be used for preliminary land use planning and hazard mitigation purpose.     

A GIS-based landslide susceptibility evaluation using bivariate and multivariate statistical analyses

Bivariate and multivariate statistical analyses were used to predict the spatial distribution of landslides in the Cuyahoga River watershed, northeastern Ohio, U.S.A. The relationship between landslides and various instability factors contributing to their occurrence was evaluated using a Geographic Information System (GIS) based investigation. A landslide inventory map was prepared using landslide locations identified from aerial photographs, field checks, and existing literature. Instability factors such as slope angle, soil type, soil erodibility, soil liquidity index, landcover pattern, precipitation, and proximity to stream, responsible for the occurrence of landslides, were imported as raster data layers in ArcGIS, and ranked using a numerical scale corresponding to the physical conditions of the region. In order to investigate the role of each instability factor in controlling the spatial distribution of landslides, both bivariate and multivariate models were used to analyze the digital dataset. The logistic regression approach was used in the multivariate model analysis. Both models helped produce landslide susceptibility maps and the suitability of each model was evaluated by the area under the curve method, and by comparing the maps with the known landslide locations. The multivariate logistic regression model was found to be the better model in predicting landslide susceptibility of this area. The logistic regression model produced a landslide susceptibility map at a scale of 1:24,000 that classified susceptibility into four categories: low, moderate, high, and very high. The results also indicated that slope angle, proximity to stream, soil erodibility, and soil type were statistically significant in controlling the slope movement.     

Entropy-based particle swarm optimization with clustering analysis on landslide susceptibility mapping

Generation of landslide susceptibility maps is important for engineering geologists and geomorphologists. The goal of this study is to generate a reliable susceptibility map based on digital elevation modeling and remote sensing data through clustering technique. This study focused on the landslide problems on a vast area located at Shei Pa National Park, Miao Li, Taiwan. Two stages of analysis were used to extract the dominant attributes and thresholds: (1) calculate the entropy with regard to the measure of influenced variables to the occurrence of landslide and (2) use the clustering analysis K-means with particle swarm optimization (KPSO) to resolve the difficulties in creating landslide susceptibility maps. The knowledge scope with regard to core factors and thresholds are solved. The self-organization map (SOM) is used as a parallel study for comparison. The overall accuracy of the susceptibility map is 86 and 77 % for KPSO and SOM, respectively. Then, the susceptibility maps are drawn and verifications made. The generation of a susceptibility map is useful for decision makers and managers to handle the landslide risk area.     

Application of weights-of-evidence and certainty factor models and their comparison in landslide susceptibility mapping at Haraz watershed, Iran

The main goal of this study was to investigate the application of the weights-of-evidence and certainty factor approaches for producing landslide susceptibility maps of a landslide-prone area (Haraz) in Iran. For this purpose, the input layers of the landslide conditioning factors were prepared in the first stage. The landslide conditioning factors considered for the study area were slope gradient, slope aspect, altitude, lithology, land use, distance from streams, distance from roads, distance from faults, topographic wetness index, stream power index, stream transport index and plan curvature. For validation of the produced landslide susceptibility maps, the results of the analyses were compared with the field-verified landslide locations. Additionally, the receiver operating characteristic curves for all the landslide susceptibility models were constructed and the areas under the curves were calculated. The landslide locations were used to validate results of the landslide susceptibility maps. The verification results showed that the weights-of-evidence model (79.87%) performed better than certainty factor (72.02%) model with a standard error of 0.0663 and 0.0756, respectively. According to the results of the area under curve evaluation, the map produced by weights-of-evidence exhibits satisfactory properties.