浅成低温热液金银多金属矿床矿化分带及找矿标志

自20世纪70年代环太平洋地区发现大批浅成低温热液型矿床以来,浅成低温热液矿床业已成为贵金属矿床和Cu、Pb、Zn等有色金属矿床的重要工业类型。文章依据主要工业组分对我国浅成低温热液Au、Ag多金属矿床进行了分类,并讨论了成矿系列及矿化分带特征,即按成矿深度浅成低温热液Au、Ag多金属矿床自下而上可分为:Au-Cu/Cu-Au矿床;Au/Au(Ag)矿床;Au-Ag矿床;Ag/Ag多金属矿床;Pb-Zn-Ag矿床。同时,根据我国浅成低温热液Au、Ag多金属矿床特征尝试性提出了浅成低温热液型银矿床的成矿规律与找矿标志。     

西藏谢通门县雄村斑岩型铜金矿床成因讨论——来自元素的空间分布特征的证据

西藏谢通门县雄村铜金矿的成矿与含眼球状石英斑晶的角闪石英闪长玢岩有关,并至少受3个玢岩岩枝控制。主成矿元素为Cu,伴生元素为Au、Ag、Zn、Pb,其他微量元素Mo、As、Ba、Bi、Cd、Co、Mn、Ni、Sb含量较高。元素在垂向上具有分带特征,即从矿体中心向外可依次划分为Cu、Au、Ag、As、Sb、(Bi)→Co、Ni→Mo→Mn→Ba→Pb、Zn、Cd、Bi、(Sb),上述元素的异常和组合是寻找和评价该类矿床的重要地球化学标志。矿床的形成经历了早期Cu—Au—Ag成矿和晚期Zn—Pb—Cu—Au—Ag成矿两个阶段:早期成矿阶段形成了Cu—Au—Ag主矿体,晚期叠加Zn—Pb—Cu—Au—Ag矿化。Cu与Au、Ag呈显著的正相关,Cu主要呈独立矿物黄铜矿产出,Au、Ag主要赋存于黄铜矿中。矿石的K/Na值为6.9、Rb/Sr值为0.8,显示出矿床矿富K、Sr和贫Na、Rb的成矿环境;而Au(平均品位0.6×10-6)0.4×10-6、Au(0.6×10-6)/Cu(0.4%)1和n(Cu)/n(Au)(为20678)40000以及Mo(19.7×10-6),说明该矿床富金而贫钼。矿床所处的大地构造位置,成矿与偏中性的斑岩有关,元素组合特征,异常元素在垂向上的分带特征,主成矿阶段的Cu—Au—Ag矿化和晚期叠加的Zn—Pb—Cu—Au—Ag矿化,富Cu、Au、Ag和贫Mo的成矿元素组合及富K、Sr和贫Na、Rb的成矿环境,均表明矿床具有产于岛弧或类似岛弧环境的斑岩型铜金矿床的特征且叠加斑岩成矿系统晚期呈脉状产出的浅成低温热液型Zn—Pb—Cu—Au—Ag矿化。     

西藏冈底斯东段构造演化及铜金多金属成矿潜力分析

地质、物探、化探、遥感的综合研究表明，西藏冈底斯东段蕴含着巨大的找矿潜力，矿化类型齐全，以斑岩型及喷流型为主。与构造演化相关形成四大成矿系列：与新特提斯洋壳俯冲作用（125－96Ma）有关的岩浆型（Cr，Pt，Cu，Ni）矿床系列及喷流型（Cu，Pb，Zn，Ag）矿床系列；与弧－陆碰撞造山作用（85－50Ma）有关的浅成低温热液型（Au，Ag，Pb，Zn，Sb）、构造蚀变岩型（Au）及矽卡岩型（Cu）矿床系列；与造山期后伸展走滑作用（22－12Ma）有关的斑岩型（Cu，Mo）、隐爆角砾岩型（Cu，Au，Pb，Zn）、剪切带型（Au，Ag，Sb）及矽卡岩型（Cu，Fe）矿床系列。由俯冲杂岩带向北，具有由结晶分异型（熔离型）－剪切带型（蚀变岩型）－矽卡岩型、浅成低温热液型－斑岩型－斑岩型十喷流型－喷流型－热液充填交代型的分带趋势，成矿总体显示出同源多位、同位多期、深源浅成、多因复成的特点。     

西藏多龙矿集区荣那铜金矿床蚀变矿物学和地球化学及找矿意义

位于西藏多龙矿集区的荣那铜金矿床是班公湖-怒江成矿带首例斑岩型-浅成低温热液型矿床,它的发现对于班公湖-怒江成矿带找矿模型的构建以及资源潜力评估有着重要意义。本文以荣那矿床ZK3204岩芯钻孔为研究对象,针对其蚀变矿物,运用短波红外光谱测试技术,并结合金属矿物组合以及黄铁矿LA-ICP-MS原位微量元素特征,以期查明其矿床成因,并为深部资源勘查提供理论依据。短波红外光谱测试显示出ZK3204钻孔蚀变矿物垂向分带组合为:高岭石+(地开石)→高岭石+伊利石→高岭石+(地开石+石膏)→高岭石+绢云母+伊利石→高岭石+伊利石+(叶腊石)+(地开石),金属矿物也从Cu-S体系逐渐转变为Cu-Fe-S体系。通过黄铁矿LA-ICP-MS原位微量元素分析发现,黄铁矿可分为四类,分别对应荣那矿床四个成矿阶段:(1) Py I:Co、Ni、Cu、Ag、Au含量较低,Co/Ni显示为沉积成因,代表成岩期黄铁矿;(2) PyⅡ:Co、Ni含量较低,Cu、Ag、Au含量较高,Co/Ni显示为沉积成因,代表第一期斑岩型矿床成矿期黄铁矿;(3) PyⅢ:Co含量较低,Ni、Cu、Ag、Au含量较高,Co/Ni显示为沉积成因,代表第二期斑岩型矿床成矿期黄铁矿;(4) PyⅣ:Cu、Ag、Au含量较低,Co、Ni含量较高,Co/Ni显示为热液成因,代表浅成低温热液矿床成矿期黄铁矿。风化作用也是荣那矿床重要地质过程,贯穿于各成矿阶段,反映为早白垩世班公湖-怒江洋盆向北俯冲消减大背景下的多龙矿集区隆升事件,导致矿床被大量剥蚀,也使黄铁矿显示沉积成因。荣那矿床目前仍有较大找矿潜力,在钻孔深部(815m以下),黄铁矿Cu、Ag、Au含量,钻孔中Cu、Pb、Zn、Cr、Hg等含量,绢云母、伊利石含量以及铜金矿的矿石品位均有向下升高的趋势,说明在ZK3204钻孔下部仍有巨大的找矿潜力,可作为未来深部资源探测的重点对象。     

论银山矿床构造系列及其与成岩成矿的关系

银山矿床属于次火山热液期后的高—中低温多种金属大型综合矿床。其成岩成矿严格受构造控制。主要矿化为两期,即与石英斑岩隐爆有关的(Cu、Au)Zn、Pb、Ag矿化,和与英安斑岩隐爆有关的Cu、Au、Ag(Ti、W、Bi)等矿化。并由于构造裂隙性质的不同,控制了不同的矿化分带。     

香格里拉陆家村银金多金属矿围岩蚀变及矿床成因

矿床具斑岩型铜矿化蚀变特征,从岩体中心向外,蚀变呈环带状分带发育,依次为强硅化带→钾硅化带→绢英岩化带→青磐岩化带。矿化在浅部表现为断裂破碎带控制的热液脉型Cu、Au、Pb、Ag矿床,深部则为斑岩型Cu、Mo矿床。     

西藏铁格隆南斑岩-高硫型浅成低温热液矿床主要矿石矿物特征

铁格隆南矿床位于班公湖—怒江成矿带西段多龙矿集区,是青藏高原发现的首例具有典型高硫型浅成低温热液矿化特征的超大型Cu(Au、Ag)矿床。本文通过大量的钻孔岩矿心地质编录,结合矿相学及电子探针分析,查明铁格隆南矿床的矿石矿物以原生硫化物为主,主要是斑铜矿、黄铜矿等Cu-Fe-S体系矿物、硫砷铜矿、砷黝铜矿等Cu-As-S体系矿物和以铜蓝和蓝辉铜矿为代表的Cu-S二元体系矿物,以及少量辉钼矿、方铅矿、闪锌矿,微量硫锡砷铜矿等。从矿石矿物组合特征可看出,铁格隆南矿床是高硫型矿化叠加于斑岩型矿化之上复合成矿的典型实例,矿床深部具有进一步扩大斑岩铜矿规模的巨大潜力,是下一步获取更多资源量的重点勘查方向。     

满洲里地区的浅成低温热液矿床

满洲里中生代火山-次火山岩发育区,发现了一系列浅成低温热液矿床,矿种有Au、Ag、Cu、Pb、Zn等.这些矿床可分为高硫化型和低硫化型,且都具有典型的围岩蚀变、蚀变分带等矿床特征.通过对额仁陶勒盖银（金）矿床和大坝金铜矿床两典型浅成低温热液矿床的对比性研究,总结其成矿规律及成矿模式.     

西藏铁格隆南超大型Cu(Au、Ag)矿床S、Pb同位素地球化学研究

西藏铁格隆南矿床位于多龙矿集区北侧,是近年来在班公湖—怒江成矿带西段发现的首例与高硫化型浅成低温热液成矿作用有关的超大型斑岩-浅成低温热液型铜(金银)矿床。本文在矿石学研究的基础上,对铁格隆南矿床中代表性岩(矿)石样品进行了S、Pb同位素分析,探讨成矿物质来源。铁格隆南矿床硫化物及硫盐矿物的δ~(34)S值在–9.8‰~6.8‰之间,平均为–1.8‰,其频率直方图具有"塔式"分布特征,总体体现出地幔岩浆硫特征,但已受到少数地壳硫的混染。矿石(~(206)Pb/~(204)Pb=17.959~18.653,~(207)Pb/~(204)Pb=15.606~15.707,~(208)Pb/~(204)Pb=37.926~39.007)与含矿花岗闪长斑岩(~(206)Pb/~(204)Pb=18.527~18.681,~(207)Pb/~(204)Pb=15.564~15.632,~(208)Pb/~(204)Pb=38.697~38.724)以及安山岩(~(206)Pb/~(204)Pb=18.543~18.572,~(207)Pb/~(204)Pb=15.529~15.538,~(208)Pb/~(204)Pb=38.654~38.672)的初始铅组成基本一致,表明三者具有相同的来源;结合铅构造模式图及其源区判别图分析,矿床的铅主要为和岩浆作用有关的上地壳与地幔混合的俯冲带铅。铁格隆南Cu(Au、Ag)矿床的S、Pb同位素组成共同指示成矿物质主要来源于深部岩浆,这种岩浆可能主要起源于班公湖—怒江洋盆俯冲板片部分熔融与地幔物质混熔,并受到少量地壳物质的混染。斑岩成矿系统理论及矿床成矿系列的"缺位理论"指示,多龙矿集区西南部可能存在一个规模较大的斑岩-浅成低温热液-隐爆角砾成矿系统,同时北东部有寻找矽卡岩型矿床的潜力。     

滇中楚雄盆地Pb-Ag-Au多金属矿床成因联系:金属矿物微量元素和硫同位素的证据

滇中老街子Pb Ag矿床和白马苴Au(Cu)矿床,是楚雄盆地中与喜马拉雅期富碱斑岩体时空关系密切的两个多金属矿床,但二者成因联系不清、成矿模式不明已成为制约该区矿床理论认识与多金属成矿模式完善的关键问题.通过开展矿区不同类型岩(矿)石中黄铁矿、镜铁矿的微量元素和黄铁矿、方铅矿、辉钼矿硫同位素的系统研究,认为:①区内Pb、Ag、Au、Cu、Mo多金属成矿物质来源与源于深部壳幔相互作用的正长斑岩岩浆有关;②两矿床成矿流体为富Cl的流体体系.其中,老街子Pb、Ag、Cu、Mo多金属成矿流体和白马苴早阶段成矿流体主要源于正长斑岩成岩过程中分异出的岩浆流体;而老街子深部镜铁矿和白马苴晚阶段成矿流体较为复杂,可能为岩浆流体和富含δ34S大气降水的混合流体,且该混合流体在迁移、沉淀成矿过程中还可能混入部分地层中的成矿物质;③相对于白马苴Au(Cu)矿床早矿化阶段,老街子Pb、Ag、Cu、Mo多金属矿化和白马苴晚矿化阶段应发生在相对高fo2和低温的环境.综合两矿床地质、岩体、矿体和成矿物质来源等方面的对比研究,认为矿区内Pb、Ag、Au、Cu、Mo多金属在成因上具亲缘关系,受控于相同性质的岩浆作用,为同一地质构造环境和岩石建造中不同部位的产物,两矿床具有"时-空-物-演"的成因联系,共同构成浅成低温热液-斑岩型Pb-Ag-Au (Cu-Mo)多金属成矿系统.     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。