Geochemistry and magmatic setting of Wadi El-Markh island-arc gabbro–diorite suite,central Eastern Desert,Egypt

Wadi El-Markh gabbro–diorite complex is composed of pyroxene hornblende gabbros, hornblende gabbros, diorites and quartz diorites. According to their bulk rock geochemistry and mineral chemistry, the gabbroic and dioritic rocks represent fractionates along a single line of descent and crystallized from a calc-alkaline mafic magma. When compared to the primitive mantle, all members of the gabbroic–dioritic rock suite are enriched in the large ion lithophile elements relative to the high field strength elements and display distinctive negative Nb and P₂O₅ anomalies. This signals an arc setting. Fractionation modeling involving the major elements reveals that the hornblende gabbros were generated from the parent pyroxene hornblende gabbros by 61.86% fractional crystallization. The diorites were produced from the hornblende gabbros by fractional crystallization with a 58.97% residual liquid, whereas the quartz diorites were formed from the diorites by 26.58% fractional crystallization. According to geothermobarometry based on amphibole mineral chemistry, the most primitive pyroxene hornblende gabbros crystallized at ～830 °C/～5 kbar. The crystallization conditions of the quartz diorites were estimated at ～570 °C/～2 kbar. In consequence the Wadi El-Markh gabbro–diorite complex represents a single magmatic suite of which fractionates crystallized in progressively shallower levels of an arc crust.     

Iron isotope fractionation during skarn-type alteration: Implications for metal source in the Han-Xing iron skarn deposit

The Han-Xing iron mineralization in the central North China Craton is a typical Fe skarn deposit associated with altered diorites. Here we report the Fe isotopic compositions of whole rocks and mineral separates from this deposit with a view to evaluate the Fe isotope fractionation during the formation of Fe skarn deposit, and to constrain the metal source. The Fe isotopes show a large variation both in whole rocks and mineral separates. Altered diorites show a wide range in δ⁵⁶Fe values (− 0.07‰ to + 0.21‰ relative to the Fe isotope standard IRMM-014) which positively correlate with their TFe₂O₃/TiO₂ ratios (Fe₂O₃ and FeO calculated as TFe₂O₃). The positive correlation indicates that heavy Fe isotopes were preferentially leached from diorites during the skarn-type alteration. Among the metallic minerals, pyrite and pyrrhotite are isotopically heavier (+ 0.12‰ to + 0.48‰) than the magnetite (+ 0.07‰ to + 0.21‰). Fe isotope fractionation between mineral pairs demonstrates that magnetite did not attain Fe isotopic equilibrium with pyrite and pyrrhotite, whereas pyrite and pyrrhotite might have attained isotopic equilibrium. Petrological observations and major element data also suggest that iron was leached from the diorites during the skarn-type alteration. If the leached iron provides the main Fe budget of the Han-Xing Fe skarn deposit, magnetite in ores would be isotopically heavier than the unaltered diorite. However, our results are in contrast with the magnetite being isotopically lighter than the unaltered diorite. This suggests that the major Fe source of the Han-Xing Fe skarn deposit is not from the leaching of diorites, and might be from magmatic fluid which is isotopically lighter than the silicate melt. Our data demonstrate that Fe isotopes can be used as important tracers in deciphering the metal source of Fe skarn deposits.     

Geochronology and geochemistry of submarine volcanic rocks in the Yamansu iron deposit,Eastern Tianshan Mountains,NW China: Constraints on the metallogenesis

The Yamansu skarn iron deposit is hosted in Early Carboniferous submarine lava flow and volcaniclastic rocks of the Yamansu Formation in Eastern Tianshan Mountains, NW China. The lava flows are predominantly basaltic, with minor andesites. Laser ablation inductively coupled plasma mass spectrometry (LAICP-MS) U–Pb zircon dating of the basalts and skarns yields almost coeval ages of 324.4 ± 0.94 and 323.47 ± 0.95 Ma, respectively. The basalts contain clinopyroxene and plagioclase phenocrysts with a considerable amount of Fe–Ti oxide minerals in the groundmass as interstitial phases, probably suggesting that olivine–, clinopyroxene- and plagioclase fractionated within the magma chamber. Geochemically, the basalts are characterized by slight variations in SiO₂ (42.90–46.61 wt.%), P₂O₅ (0.08–0.12 wt.%), MnO (0.35–0.97 wt.%) and TiO₂ (0.74–0.82 wt.%), and relatively large variations in CaO (6.93–15.13 wt.%), Al₂O₃ (14.71–19.93 wt.%), total Fe₂O₃ (8.14–12.66 wt.%) and MgO (4.96–8.52 wt.%). They possess flat to light rare earth element (REE)-depleted patterns and display variable degrees of depletions in high field-strength elements (HFSE), suggesting a transitional feature between MORB and arc volcanic rocks, and indicating a back-arc tectonic setting. Furthermore, the geochemical signature also suggests that the volcanic rocks of Yamansu Formation were produced by partial melting of the spinel-facies, asthenospheric mantle peridotite which had been metasomatized by slab-derived fluids. The broadly overlapping ages of the basalts and skarn mineralization suggests that the skarn formation in the Yamansu deposit is related to subaqueous volcanism. In combination with the available information including fluid inclusions and stable isotope data, we infer that the hydrothermal fluids that generated the skarns could be a mixture of evolved magma-derived fluids and convecting sea water driven by the heat from the shallow active magma chamber. The Yamansu basalts provided the source of iron for the skarn mineralization. We envisage the submarine volcanism, skarn alteration and iron mineralization in the Yamansu iron deposit as a continuous process, different from either conventional intrusion-related skarn type or submarine volcanic exhalation sedimentation type.     

Keketuohai mafic–ultramafic complex in the Chinese Altai,NW China: Petrogenesis and geodynamic significance

Devonian magmatism was very intensive in the tectonic evolutionary history of the Chinese Altai, a key part of the Central Asian Orogenic Belt (CAOB). The Devonian Keketuohai mafic–ultramafic complex in the Chinese Altai is a zoned intrusion consisting of dunite, olivine gabbro, hornblende gabbro and pyroxene diorite. The pyroxene diorite gives a zircon U–Pb age of 409 ± 5 Ma. Variations in mineral assemblage and chemical composition suggest that the petrogenesis of the Keketuohai Complex was chiefly governed by fractional crystallization from a common magma chamber. Low SiO₂, K₂O and Na₂O contents, negative covariations between P₂O₅, TiO₂ and Mg# value suggest insignificant crustal assimilation/contamination. Thus the positive ε_Nd(t) values (0 to + 2.7) and slight enrichments in light rare earth elements (e.g., La/Yb_N = 0.98–3.64) suggest that their parental magma was possibly produced by partial melting of the lithospheric mantle. Model calculation suggests that their parental magma was high-Mg (Mg# = 66) tholeiitic basaltic melt. The Keketuohai intrusion was coeval with diverse magmatism, high temperature metamorphism and hydrothermal mineralization, which support a previously proposed model that ridge subduction most likely played an important role in the tectonic evolution of the Chinese Altai.     

Mineralogical evidence for crystallization conditions and petrogenesis of ilmenite-series I-type granitoids at the Baogutu reduced porphyry Cu deposit (Western Junggar,NW China): Mössbauer spectroscopy,EPM and LA-(MC)-ICPMS analyses

Primary ore-forming minerals retain geochemical signatures of magmatic crystallization information and can reveal the petrochemical conditions prevalent at the time of their formation. The Baogutu deposit is a typical reduced porphyry Cu deposit. Amphibole and biotite Fe³⁺/ΣFe ratios, minerals (feldspar, biotite, amphibole, zircon and apatite), in situ elemental and apatite Nd isotopic compositions were determined by Mössbauer spectroscopy, electron probe microanalysis, and laser ablation multiple-collection inductively coupled plasma mass spectrometry, respectively, to investigate the magma oxidation state, petrogenesis, source features, and to constrain the carbon species at magmatic stages for the intrusive phases. The results show that the primary plagioclase and amphibole in the mineralized diorite to granodiorite porphyry and post ore hornblende diorite porphyry are distinct (An_26-55 versus An_60-69; Mg-hornblende versus tschermakite). In particular, the amphibole shows distinct major and trace element compositions with light rare earth element enrichments and negative Eu anomalies in Mg-hornblende and light rare earth element depletions and no Eu anomalies in tschermakite. All the analyzed biotites are primary igneous phases with a biotite phenocryst profile showing significant variations of Zn, Cr, Sc and Sr from core to rim. These results may indicate the occurrence of mixing between two distinct magmas during mineral formation. Titanium in zircon and Si¹ in amphibole thermometries indicate that magma crystallized at >900 °C and continued to ∼650 °C. In situ apatite Nd isotope (εNd(t) = 5.6–7.6, T_DM2 = 620–460 Ma), indicate absence of significant reduced sedimentary contamination and the source of juvenile lower crust. Slightly decreasing Fe³⁺/ΣFe ratios from biotite and amphibole to whole rock indicate decreasing oxygen fugacity during magma crystallization. Recalculated biotite compositions according to Fe³⁺/ΣFe ratios indicate fO₂ values of less than Ni-NiO buffer (NNO) which show slightly lower values than that estimated according to zircon/melt distribution coefficients Ce anomalies (∼ΔNNO + 0.6). These values are consistent with the features of reduced porphyry Cu deposits. Crystallization of other mineral phases significantly affects the reliability of oxybarometer of zircon/melt distribution coefficients Eu anomalies and Mn contents in apatite. This oxidation state suggests that only CO₂ was present at the magmatic stage, and implies that CH₄ formed during CO₂ reduction occurring later hydrothermal alteration. The alteration of primary amphibole to actinolite released Ti, Al, Fe, Mn, Na and K to the fluid with later precipitation of titanite, albite and minor ilmenite and magnetite during actinolite alteration.     

Petrogenesis of granitoids in the Dewulu skarn copper deposit: implications for the evolution of the Paleotethys ocean and mineralization in Western Qinling,China

The Tethyan tectonic domain hosts numerous world-class mineral deposits. Among these, the Dewulu skarn copper deposit in Western Qinling, China belongs to the Paleotethys ore belt. The skarn and orebodies here occur as stratoids or lenses at the contact between the Triassic Dewulu intrusive complex and Permian marine clastic and carbonates. Alteration minerals include prograde skarns (garnet, diopside, wollastonite), plagioclase, hornblende, actinolite, tremolite, epidote, chlorite, calcite, quartz and sericite. The main ore types include early disseminated skarn-type replacement orebodies and late-stage quartz-sulfide veins. Chalcopyrite is the major ore mineral, along with pyrite, bornite and sphalerite. The Dewulu intrusive complex comprises quartz diorite, quartz diorite porphyry and dioritic mafic microgranular enclaves (MME). The MMEs are spheroidal in shape, and have igneous mineral assemblages, acicular apatites, complex oscillatory zoned plagioclase and quartz megacrysts surrounded by mafic minerals. The MMEs are metaluminous and calc-alkaline to high-K calc-alkaline, and possess relatively high Ni, Cr and MgO contents and Mg^# values. They display sub-parallel patterns in trace element spider diagrams and rare earth element (REE) plots. They are also characterized by the enrichment of Rb, U and Th, depletion of Ba, Sr, Nb and Ta and negative Eu anomaly. Zircon LA-ICP-MS U–Pb dating of the dioritic MME yields an age of 247.0 ± 2.2 Ma, coeval with the host quartz diorite, quartz diorite porphyry and ore-related sericite ⁴⁰Ar/³⁹Ar plateau ages within analytical uncertainties. Oxygen fugacity estimated from trace element compositions of zircons from the dioritic MME shows FMQ ± 3.3. The zircons have negative ε_Hf(t) values in a range of − 8.0 to − 3.3, corresponding to two-stage model ages ranging from 1.48 to 1.78 Ga. The integrated data from petrology, geochronology and bulk geochemistry suggest that the Early Triassic granitoids associated with Cu skarn mineralization at Dewulu were products of arc magmatism and involved magma mixing in an active continental margin setting. The magma was sourced through partial melting of enriched sub-continental lithospheric mantle that had been previously modified by slab-derived melt during the continuous northward subduction of the Paleotethys oceanic slab.     

Paleoproterozoic high-Mg low-Ti gabbro-granite series in eastern Sarmatia: Geochemistry and formation conditions

We present nomenclature and geochemical classification of Paleoproterozoic LILE-enriched high-Mg low-Ti mafic-granitoid rocks of the eastern margin of the Sarmatia paleocontinent and substantiate their tectonic position. Two differentiated rock series are recognized: (1) biotite-orthopyroxene melanorite-quartz-meladiorite-melagranodiorite and (2) hornblende-biotite quartz-diorite-tonalite-granodiorite. Both series correspond in chemical composition to calc-alkalic gabbro-diorites, diorites, tonalites, and granodiorites. As follows from their mineralogical and geochemical compositions, these are norite-diorite rocks (intrusive analogs of boninites) (SiO₂ = 52-65 wt.%, MgO = 5-20 wt.%, TiO₂ = 0.2-0.8 wt.%) and high-Mg granitoids (SiO₂ = 60-70 wt.%, Na₂O/K₂O = 0.65-1.33, MgO = 3.23-7.40 wt.%, K₂O = 1.9-4.0 wt.%), respectively. Their high Mg# values (67-87) and Cr contents (> 100 ppm), on the one hand, and their isotope-geochemical characteristics similar to those of the host metaterrigenous rocks, the magma enrichment in LILE, and the presence of Ni sulfide ores with a predominance of light sulfur isotopes, on the other, testify to crustal contamination of mantle magmas. The rock series are nearly of the same age and belong to the same magmatic system, where high-Mg granitoids are differentiates of parental high-Mg (boninite-like) norite-dioritic magma. This is confirmed by a gradual increase in SiO₂ and K₂O contents and a decrease in Mg# and Ni, Co, V, and Cr contents in the sequence from norites to granodiorites and by the facies and phase relationships between the series. Intrusion of rocks took place at shallow depths following the low-temperature metamorphism and folding under postcollisional collapse of the East Sarmatian orogen.     

A mafic intrusion of “arc affinity” in a post-orogenic extensional setting: A case study from Ganluogou gabbro in the northern Yidun Arc Belt,eastern Tibetan Plateau

Generally, arc-related or subduction-related mafic magmas are formed during or slightly postdate subduction, and characterized by depletion in high field strength elements (HFSEs) relative to the large ion lithophile elements (LILEs) and light rare-earth elements (LREEs). Combining with mineral chemistry and Sr–Nd isotopes, these geochemical characteristics were usually used to define an arc setting, especially for some ancient arcs that had been strongly modified by later tectonic activities. However, we report an exceptional case from the northern part of the Triassic Yidun Arc Belt, eastern Tibetan Plateau. The Ganluogou gabbro (∼152 Ma) occurs as several intrusive bodies. Its mineral assemblage is olivine (chrysolite), plagioclase (anorthite), clinopyroxene (diopside), amphibole (edenite and pargasite) and phlogopite. Whole rock geochemistry shows low SiO₂ (42.87–46.99 wt.%), total rear earth elements (ΣREE = 22.8–28.4 ppm), Na₂O + K₂O (0.92–1.34 wt.%), and high Al₂O₃, MgO and FeO contents. It has small variations of initial ⁸⁷Sr/⁸⁶Sr ((⁸⁷Sr/⁸⁶Sr)_i = 0.7053–0.7055) and ε_Nd(t) values (−4.8 to −1.8). All the samples exhibit enrichment in LILEs including Th and U, but strongly depleted in HFSEs, including Nb, Ta, Zr and Hf. For the mineral chemistry, there are two type amphiboles. Amp(I) show higher V, Sc, Cr, Sr, Nb and Zr contents, but lower Th and U contents than those of Amp(II). Their REE patterns range from convex shape without Eu anomaly to LREE-enriched pattern with weak positive Eu anomaly. We suggest that Amp(I) was crystallized from a liquid that was mainly buffered by olivine, clinopyroxene and plagioclase, while Amp(II) crystallized from later melt that was mainly buffered by olivine. Based on clinopyroxene chemistry, compositions of coexisting olivine and plagioclase, and whole rock Sr–Nd isotopes, the parental magma of the Ganluogou gabbro is interpreted as a tholeiitic arc-affinity magma, which might be derived from an N-MORB mantle that had been metasomatised by slab-derived melts in the late Triassic (237–206 Ma). Thus, the Ganluogou gabbro provides an example that magmas exhibiting arc-affinity could in fact be formed in a post-orogenic extensional setting.     

Magmatic process recorded in plagioclase at the Baogutu reduced porphyry Cu deposit,western Junggar,NW-China

Despite the fact that porphyry Cu deposits contain large amounts of Cu in one or more small stocks, few studies have discussed evidence for significant magma recharge in porphyry Cu deposits. A systematic elemental and Sr isotopic study of plagioclase crystals from mineralized diorite and granodiorite porphyry constrains the processes of crystallization and magma recharge at the Baogutu reduced porphyry copper deposit, western Junggar, NW-China. Large compositional changes in An (12–24 mol%) are observed along with strong positive correlations between An and FeO. Significant resorption textures are also preserved in plagioclase crystals as well as repeated oscillatory zoning in An and FeO, and complex Sr isotope variations. Three types of crystals with different core-to-rim Sr isotope variations are recognized. Type I crystals have core-to-rim increases in (⁸⁷Sr/⁸⁶Sr)_i that could be explained by diffusion. For example, Sr isotope variations recorded in BCK2-1-2 crystal could be generated by diffusion with simulated maximum crystal residence times of 100–500 years with the proximate value of ∼300 years. Type II crystals with different variation trends in (⁸⁷Sr/⁸⁶Sr)_i on opposite sides of the core could be produced either by multi-stage crystallization or by analytical uncertainty. Whereas, type III crystals with complex core-to-rim variations in (⁸⁷Sr/⁸⁶Sr)_i, may record repeated magma recharge events. All these results suggest repeated recharging of the magma chamber by hotter, more mafic and less radiogenic Sr isotope melts. Therefore, more mafic melt injection recorded in plagioclase profiles may provide significant metal contributions to the magma chamber, which ultimately results in Cu mineralization at the Baogutu reduced porphyry copper deposit.     

Petrology,geochemistry and geochronology of the magmatic suite from the Jianzha Complex,central China: Petrogenesis and geodynamic implications

The intermediate–mafic–ultramafic rocks in the Jianzha Complex (JZC) at the northern margin of the West Qinling Orogenic Belt have been interpreted to be a part of an ophiolite suite. In this study, we present new geochronological, petrological, geochemical and Sr–Nd–Hf isotopic data and provide a different interpretation. The JZC is composed of dunite, wehrlite, olivine clinopyroxenite, olivine gabbro, gabbro, and pyroxene diorite. The suite shows characteristics of Alaskan-type complexes, including (1) the low CaO concentrations in olivine; (2) evidence of crystal accumulation; (3) high calcic composition of clinopyroxene; and (4) negative correlation between FeO^tot and Cr₂O₃ of spinels. Hornblende and phlogopite are ubiquitous in the wehrlites, but minor orthopyroxene is also present. Hornblende and biotite are abundant late crystallized phases in the gabbros and diorites. The two pyroxene-bearing diorite samples from JZC yield zircon U–Pb ages of 245.7 ± 1.3 Ma and 241.8 ± 1.3 Ma. The mafic and ultramafic rocks display slightly enriched LREE patterns. The wehrlites display moderate to weak negative Eu anomalies (0.74–0.94), whereas the olivine gabbros and gabbros have pronounced positive Eu anomalies. Diorites show slight LREE enrichment, with (La/Yb)_N ratios ranging from 4.42 to 7.79, and moderate to weak negative Eu anomalies (Eu/Eu¹ = 0.64–0.86). The mafic and ultramafic rocks from this suite are characterized by negative Nb–Ta–Zr anomalies as well as positive Pb anomalies. Diorites show pronounced negative Ba, Nb–Ta and Ti spikes, and typical Th–U, K and Pb peaks. Combined with petrographic observations and chemical variations, we suggest that the magmatism was dominantly controlled by fractional crystallization and crystal accumulation, with limited crustal contamination. The arc-affinity signature and weekly negative to moderately positive ε_Nd(t) values (−2.3 to 1.2) suggest that these rocks may have been generated by partial melting of the juvenile sub-continental lithospheric mantle that was metasomatized previously by slab-derived fluids. The lithologies in the JZC are related in space and time and originated from a common parental magma. Geochemical modeling suggests that their primitive parental magma had a basaltic composition. The ultramafic rocks were generated through olivine accumulation, and variable degrees of fractional crystallization with minor crustal contamination produced the diorites. The data presented here suggest that the subduction in West Qinling did not cease before the early stage of the Middle Triassic (∼242 Ma), a back-arc developed in the northern part of West Qinling during this period, and the JZC formed within the incipient back-arc.     

Geochronology and geochemistry of porphyritic intrusions in the Duolong porphyry and epithermal Cu-Au district,central Tibet: Implications for the genesis and exploration of porphyry copper deposits

The Duolong district in central Tibet hosts a number of porphyry as well as high sulfidation epithermal copper–gold deposits and prospects, associated with voluminous calc-alkaline volcanism and plutonism. In this study, we present new geochronological, geochemical, isotopic and mineralogical data for both economically mineralized and barren porphyritic intrusions from the Duobuza and Naruo porphyry Cu–Au deposits. Zircon U–Pb analyses suggest the emplacement of economically mineralized granodiorite porphyry and barren granodiorite porphyry at Naruo deposit took place at 119.8 ± 1.4 Ma and 117.2 ± 0.5 Ma, respectively. Four molybdenite samples from the Naruo deposit yield an isochron Re–Os age of 119.5 ± 3.2 Ma, indicating mineralization occurred synchronously with the emplacement of the early granodiorite porphyry. At Duobuza deposit, the barren quartz diorite porphyry intruded at 119.5 ± 0.7 Ma, and two economically mineralized intrusions intruded at 118.5 ± 1.2 Ma (granodiorite porphyry) and 117.5 ± 1.2 Ma (quartz diorite porphyry), respectively. Petrographic investigations and geochemical data indicate that all of the porphyritic intrusions were oxidized, water rich, and subduction-related calc-alkaline magmas. Zircons from the porphyritic intrusions have a wide range in the ε_Hf (0–11.1) indicating that they were sourced from mixing of mantle-derived mafic, and crust-derived felsic melts. Moreover, the variation of trace element content of plagioclase phenocrysts indicates that the magma chambers were recharged by mafic magmas.Comparison of the composition of amphibole phenocrysts indicates the porphyry copper–gold mineralization at Duolong was generated in magma chambers at low crystallization temperatures and pressures (754° to 791 °C, 59 M to 73 MPa, n = 8), and under highly oxidizing conditions (ΔNNO 2.2 to 2.7, n = 8). In contrast, barren intrusions were sourced from the magma chambers with higher crystallization temperatures and pressures (816° to 892 °C, 111 to 232 MPa, n = 22) that were less oxidizing (ΔNNO 0.6 to 1.6, n = 22). The requirement for a thermal contrast is supported by the declining of Ti content in magnetite crystals in barren intrusions (12,550 to 34,200 ppm) versus those from economically mineralized intrusions (600 to 3400 ppm). Moreover, the V content in magnetite crystals from economically mineralized intrusions (990 to 2510 ppm) is lower than those recorded from barren intrusions (2610 to 3510 ppm), which might reflect the variation in oxidation state of the magma. The calculated water solubility of the magma forming the economically mineralized intrusions (3.2–3.7 wt%) is lower than that of magma forming the barren intrusions (4.6–6.4 wt%). Based on the chemical–physical characteristics of economically mineralized magma, our study suggests that the development of porphyry Cu–Au mineralization at Duolong was initiated by shallow-level emplacement of a magma that crystallized at lower temperatures and pressures. Experimental studies show that copper and water solubilities in silicate melts decrease with falling temperatures and pressures, indicating metals and ore-forming fluids are more likely to be released from a magma reservoir emplaced at shallow crustal levels. We propose the magnetite might be a convenient exploration tool in the search for porphyry copper mineralization because the variations in Ti and V content of mineral concentrates and rock samples are indicative of barren versus mineralized intrusions.     

Petrogenesis of Dongguashan skarn-porphyry Cu-Au deposit related intrusion in the Tongling district,eastern China: Geochronological,mineralogical, geochemical and Hf isotopic evidence

The Dongguashan skarn-porphyry Cu-Au deposit, located in the Tongling district of the Middle-Lower Yangtze River Valley metallogenic belt (MLYB), consists of skarn ore bodies in the upper part and porphyry ore bodies in the lower part, both of which are hosted in quartz diorite and quartz monzodiorite. Zircon U-Pb age and geochemical studies show that the quartz diorite of the Dongguashan intrusion formed at 140.3 ± 2.0 Ma (MSWD = 0.19) and belongs to the high potassium calc-alkaline series. It is enriched in large ion lithophile elements (LILE) and light rare earth elements (LREE), depleted in high field-strength elements (HFSE) and heavy rare earth elements (HREE), and has a slightly negative Eu anomaly. ¹⁷⁶Hf/¹⁷⁷Hf values of the rims of zircons show a variable range (0.282087–0.282391), corresponding with calculated ε_Hf(t) values of − 10.72 to − 21.46. Plagioclases in the quartz diorite have unbalanced structure characterized by bright andesine and labradorite (An = 37.0–65.5) cores with higher contents of Fe and Sr and are corroded by dark oligoclase (An = 13.8–27.6) rim. Major elements, trace elements, Hf isotope, and the composition of plagioclases indicate that the parental magma of the Dongguashan intrusion was produced by the mixing of underplating mafic magma and felsic magma formed by remelting of Paleoproterozoic and Neoarchean crustal rocks, Neoproterozoic crust may also provide some material to the felsic magma. Mafic magma played a key role and made the parental magma rich in water, sulfur, metals (Cu, Au) and gave it a high oxygen fugacity. During its magmatic evolution, the parental magma underwent fractional crystallization of hornblende, apatite, sphene and other mafic minerals. Some quartz diorite and quartz monzodiorite samples that show adakitic signatures, may result from injection of mafic magma. Some inherited zircons of the quartz diorite in the Dongguashan intrusion gave ages of 2.40–2.50 Ga, 1.95–2.05 Ga and 0.74–0.81 Ga, coming from ultramafic, mafic and andesitic igneous rocks, and this indicates that there may have been three periods (2.4, 2.0, and 0.8 Ga) of magmatic activity in the Tongling district.     

Mineral chemistry and genesis of the Permian Cihai and Cinan magnetite deposits,Beishan, NW China

Cihai and Cinan are Permian magnetite deposits related to mafic-ultramafic intrusions in the Beishan region, Xinjiang, NW China. The Cihai mafic intrusion is dominantly composed of dolerite, gabbro and fine-grained massive magnetite ore, while gabbro, pyrrhotite + pyrite-bearing clinopyroxenite and magnetite ore comprise the major units in Cinan. Clinopyroxene occurs in both deposits as 0.1–2 mm in diameter subhedral to anhedral grains in dolerite, gabbro and clinopyroxenite. High FeO contents (11.7–28.9 wt%), low SiO₂ (43.6–54.3 wt%) and Al₂O₃ contents (0.15–6.08 wt%), and low total REE and trace element contents of clinopyroxene in the Cinan clinopyroxenite imply crystallization early, at high pressure. This clinopyroxene is FeO-rich and Si and Ti-poor, consistent with the clinopyroxene component of large-scale Cu-Ni sulfide deposits in the Eastern Tianshan and Panxi ares, as well as Tarim mafic intrusion and basalt, implying the Cinan mafic intrusion and sulfide is related to tectonic activity in the Tarim LIP. The similar mineral chemistry of clinopyroxene, apatite and magnetite in the Cihai and Cinan gabbros (e.g., depleted LREE, negative Zr, Hf, Nb and Ta anomalies in clinopyroxene, lack of Eu anomaly in apatite and similarity of oxygen fugacity as indicated by V in magnetite), indicate similar parental magmatic characteristics. Mineral compositions suggest a crystallization sequence of clinopyroxenite/with a small amount of sulfide – gabbro – magnetite ore in the Cinan deposit, and magnetite ore – gabbro – dolerite in Cihai. The basaltic magma was emplaced at depth, with magnetite segregation (and formation of the Cinan magnetite ores) occurring in relatively low fO₂ conditions, after clinopyroxenite and gabbro fractional crystallization. The evolved Fe-rich basaltic magma rapidly rose to intermediate or shallow depths, forming an immiscible Fe-Ti oxide magma as fO₂ increased and leaving a Fe-poor residual magma in the chamber. The residual magmas was emplaced at different levels in the crust, forming the Cihai gabbro and dolerite, respectively. Finally, the immiscible Fe-Ti oxide magma was emplaced into the earlier formed dolerite because of late magma pulse uplift, resulting in a distinct boundary between the magnetite ores and dolerite.     

Geochemistry of island arc dolerites and diorites along Qift–Quseir asphaltic road,central Eastern Desert,Egypt

The Precambrian basement rocks exposed along Qift–Quseir asphaltic road, central Eastern Desert of Egypt, exhibit two contrasted tectonic units, each of which has its own lithology structural style and grade of metamorphism. They are intruded by dolerite and diorite dykes. The alkali (Na₂O+K₂O) and TiO₂ contents increase whereas Al₂O₃, FeO, MgO, CaO and MnO decrease with increasing SiO₂ from dolerites to diorites. The trace elements Ti, Zr, Cr, Y and Ni indicate that the dolerites are tholeiitic with slight tendency toward calc-alkaline and formed from basaltic magma in an active continental margin, while diorites are calc-alkaline and were formed by fractional crystallisation of high-alumina basaltic magma in an island arc and active continental margin tectonic environment where they probably represent the forerunner of G1 granites. The molecular ratios Mg values (MgO×100/MgO+FeO) of dolerites range from 47 to 49 while those of diorite range from 51 to 59, indicating that the dolerite and diorite have suffered mild fractionation. Mineral chemistry for the diorites shows that the amphiboles are classified as magnesiohornblende and the plagioclase composition is An_39–42 (i.e. the narrow range indicate that the pluton has not suffered extensive fractional crystallisation). The Al content of amphibole displays significant variation with pressure and temperature, also the change of the Ca/(Ca+Na) ratio of plagioclase is dependent on temperature. The amphibole–plagioclase geothermobarometer suggested the P-T formation conditions of studied dykes as 2 kbar and 600 °C.     

冀南綦村岩体斑状黑云母角闪闪长岩的成因矿物学研究

綦村岩体是冀南邯邢地区典型的中生代高镁闪长岩杂岩体,主要由斑状黑云母角闪闪长岩、角闪闪长岩、闪长岩、二长岩和少量辉长岩组成。对綦村斑状黑云母角闪闪长岩进行了较为详细的成因矿物学研究,探讨了其成因及其地质意义。研究发现,綦村斑状黑云母角闪闪长岩中的角闪石多为镁铝钙闪石和镁角闪石;黑云母主要为富镁黑云母;斜长石发育环带结构,核部以中长石和拉长石为主,边部多为更长石。角闪石矿物温压计估算结果显示,角闪石斑晶的形成温度为930~970 ℃,压力介于300~340 MPa之间,深度10~15 km,氧逸度为ΔNNO+0.1~+2.3,平衡熔融体中的水含量4.8%~5.5%;与黑云母平衡的角闪石形成温度为684~760 ℃,压力降低至42~61 MPa,熔体中水含量降至3.1%~4.3%,氧逸度为ΔNNO+0.7~+2.4。黑云母温度计和氧逸度计获得的结果与角闪石温压计估算结果一致。该结果表明,研究区高氧逸度的铁镁质岩浆在中地壳曾经驻留,并发生了以角闪石为主的结晶分异,富含挥发分的分异岩浆在后期快速侵位形成高镁闪长岩和矽卡岩型铁矿。     

Petrology of mafic and ultramafic layered rocks from the Jaboncillo Valley,Sierra de Valle Fértil,Argentina: Implications for the evolution of magmas in the lower crust of the Famatinian arc

This work presents the field setting, petrography, mineralogy and geochemistry of a gabbroic and peridotitic layered body that is lens-shaped and surrounded by gabbronorites, diorites, and metasedimentary migmatites. This body exposed at Jaboncillo Valley is one among several examples of mafic and ultramafic layered sequences in the Sierras Valle Fértil and La Huerta, which formed as part of the lower crust of the Ordovician Famatinian magmatic arc in central-western Argentina. The layered sequence grew at deep crustal levels (20–25 km) within a mafic lower crust. The base of the layered body was detached during the tectonic uplift of the Famatinian lower crust, whereas the roof of the layered body is exposed in the eastern zone. In the inferred roof, olivine-bearing rocks vanish, cumulate textures are less frequent, and the igneous sequence becomes dominated by massive or thinly banded gabbronorites. Mainly based on the petrographic relationships, the inferred order of crystallization in the gabbroic and peridotitic layered sequence is: (1) Cr–Al-spinel + olivine, (2) Cr–Al-spinel + olivine + clinopyroxene + magnetite, (3) Cr–Al-spinel + olivine + plagioclase + magnetite ± orthopyroxene, and (4) Al-spinel + orthopyroxene + amphibole. A strong linear negative correlation between olivine and plagioclase modal proportions combined with field, petrographic and geochemical observations are used to demonstrate that the physical separation of olivine and plagioclase results in rock diversity at scales of a few centimeters to tens of meters. However, the composition of olivine (Fo ～ 0.81) and plagioclase (An > 94%) remains similar throughout the layered sequence. Spinels are restricted to olivine-bearing assemblages, and display chemical trends characteristic of spinels found in arc-related cumulates. Gabbroic and peridotitic layered rocks have trace element concentrations reflecting cumulates of early crystallizing minerals. The trace element patterns still retain the typical features of subduction-related arc magmatism, showing that the process of cumulate formation did not obscure the trace element signature of the parental magma. Using the composition of cumulus minerals and whole-rock chemical trends, we show that the parental magma was mafic (SiO₂ ～ 48 wt.%) with Mg-number around 0.6, and hydrous. The oxygen fugacity (fO₂) of the parental magma estimated between +0.8 and ?0.6 log fO₂ units around the fayalite–magnetite–quartz (FMQ) buffer is also characteristic of primitive hydrous arc magmas. The initially high water content of the parental magma allowed amphibole to crystallize as an interstitial phase all over the crystallization evolution of the layered sequence. Amphibole crystallization in the inter-cumulus assemblage gives rise to the retention of many trace elements which would otherwise be incompatible with the mineral assemblage of mafic–ultramafic cumulates. This study shows that there exist strongly mafic and primitive magmas that are both generated and emplaced within the lower crustal levels of subduction-related magmatic arc. Our findings together with previous studies suggest that the Early Ordovician magmatic paleo-arc from central-northwestern Argentina cannot be regarded as a typical Andean-type tectono-magmatic setting.     

Geochemistry and U-Pb zircon dating constraints of some plutonic rocks along Bir Tawilah shear zone,central Saudi Arabia: Implication for magma peterogenesis and age of gold mineralization

The study area covered by this work is located along the Bir Tawilah fault zone which encompasses the Arabian Shield between Afif terrane and western oceanic terranes. The rocks are dominantly ophiolite assemblages, island arc metavolcanic and metasedimentary rocks, and dioritic to granitic intrusions. The diorite and granodiorite rocks are I-type granitoids, calk-alkaline, metaluminous to peraluminous, formed in a volcanic arc setting, whereas the monzogranite is classified as A-type granite, alkaline and highly fractionated calc-alkaline, generated in within-plate tectonic setting. Nb and Y relationships indicated that the diorites and granodiorites were generated by a mafic parental magma contaminated with crustal materials, and controlled by fractional crystallization, whereas the monzogranites were generated from a magma characterized by an enriched mantle (EM) source.Mineralization including gold is hosted by the carbonatized serpentinite (listvenite) and the syn-tectonic granodiorite along Bir Tawilah thrust zone. U-Pb zircon geochronology indicates that the granodiorite at Jabal Ghadarah is emplaced at ca. 630 ± 12 Ma, probably suggests that the metallic minerals associated with the granodiorite along Bir Tawilah thurst zone are the result of remobilization of pre-existing gold mineralization associated with listevenite that is related to arc accretion.     

Mineralogy,fluid inclusions,and isotopes of the Cihai iron deposit,eastern Tianshan,NW China: Implication for hydrothermal evolution and genesis of subvolcanic rocks-hosted skarn-type deposits

Most skarn deposits are closely related to granitoids that intruded into carbonate rocks. The Cihai (>100 Mt at 45% Fe) is a deposit with mineral assemblages and hydrothermal features similar to many other typical skarn deposits of the world. However, the iron orebodies of Cihai are mainly hosted within the diabase and not in contact with carbonate rocks. In addition, some magnetite grains exhibit unusual relatively high TiO₂ content. These features are not consistent with the typical skarn iron deposit. Different hydrothermal and/or magmatic processes are being actively investigated for its origin. Because of a lack of systematic studies of geology, mineral compositions, fluid inclusions, and isotopes, the genetic type, ore genesis, and hydrothermal evolution of this deposit are still poorly understood and remain controversial.The skarn mineral assemblages are the alteration products of diabase. Three main paragenetic stages of skarn formation and ore deposition have been recognized based on petrographic observations, which show a prograde skarn stage (garnet-clinopyroxene-disseminated magnetite), a retrograde skarn stage (main iron ore stage, massive magnetite-amphibole-epidote ± ilvaite), and a quartz-sulfide stage (quartz-calcite-pyrite-pyrrhotite-cobaltite).Overall, the compositions of garnet, clinpyroxene, and amphibole are consistent with those of typical skarn Fe deposits worldwide. In the disseminated ores, some magnetite grains exhibit relatively high TiO₂ content (>1 wt.%), which may be inherited from the diabase protoliths. Some distinct chemical zoning in magnetite grains were observed in this study, wherein cores are enriched in Ti, and magnetite rims show a pronounced depletion in Ti. The textural and compositional data of magnetite confirm that the Cihai Fe deposit is of hydrothermal origin, rather than associated with iron rich melts as previously suggested.Fluid inclusions study reveal that, the prograde skarn (garnet and pyroxene) formed from high temperature (520–600 °C), moderate- to high-salinity (8.1–23.1 wt.% NaCl equiv, and >46 wt.% NaCl equiv) fluids. Massive iron ore and retrograde skarn assemblages (amphibole-epidote ± ilvaite) formed under hydrostatic condition after the fracturing of early skarn. Fluids in this stage had lower temperature (220°–456 °C) and salinity (8.4–16.3 wt.% NaCl equiv). Fluid inclusions in quartz-sulfide stage quartz and calcite also record similar conditions, with temperature range from 128° to 367 °C and salinity range from 0.2 to 22.9 wt.% NaCl equiv. Oxygen and hydrogen isotopic data of garnet and quartz suggest that mixing and dilution of early magmatic fluids with external fluids (e.g., meteoric waters) caused a decrease in fluid temperature and salinity in the later stages of the skarn formation and massive iron precipitation. The δ¹⁸O values of magnetite from iron ores vary between 4.1 and 8.5‰, which are similar to values reported in other skarn Fe deposits. Such values are distinct from those of other iron ore deposits such as Kiruna-type and magmatic Fe-Ti-V deposits worldwide. Taken together, these geologic, geochemical, and isotopic data confirm that Cihai is a diabase-hosted skarn deposit related to the granitoids at depth.     

Early Cretaceous high-Mg adakites associated with Cu-Au mineralization in the Cebu Island,Central Philippines: Implication for partial melting of the paleo-Pacific Plate

Early Cretaceous arc volcanic rocks, diorite intrusions and an associated large porphyry deposit occur in the Cebu Island, Central Philippines. In this paper, we studied the diorite porphyries associated with Cu-Au mineralization in the Kansi region, where Early Cretaceous arc volcanic rocks are widely distributed. Zircon U-Pb age reveals that the diorites were formed at ca. 110 Ma, close to the formation age of Lutopan diorites in the famous Atlas porphyry Cu-Au deposit (109–101 Ma), and younger than those of the arc volcanics in this region (126–118 Ma). The Kansi diorites and Lutopan diorites are both calc-alkaline high-Mg adakites with high Sr/Y ratios. Their major elements define similar variation trends in Harker diagrams, suggesting that they were probably generated from a uniform source but experienced different degree of partial melting or fractional crystallization. The Kansi diorites are characterized by LREE enrichment, HREE depletion, no Eu negative anomaly, with enrichment of Pb, Sr, Zr and Hf and depletion of Nb, Ta, and Ti. They are probably generated by the partial melting of subducted oceanic crust, followed by a certain degree of mantle interaction and crustal contamination. The highly depleted Sr-Nd-Pb-Hf isotopes of the Kansi diorites are close to the Amami Plateau basalt and tonalite, indicating the dominance of a Pacific-type MORB in the source. The Cu-Au mineralization-related Kansi diorites are characterized by high oxygen fugacities more than ΔFMQ +2, indicating quite a good potential for porphyry Cu-Au mineralization in the region. Finally, in our tectonic model, the successive generation of arc volcanic rocks and adakites in the Cebu Island are responses to the subduction and rollback of the paleo-Pacific Plate to the proto-Philippine Sea Plate (PSP) in the Early Cretaceous.     

Crustal recycling through intraplate magmatism: Evidence from the Trans-North China Orogen

The North China Craton (NCC) preserves the history of crustal growth and craton formation during the early Precambrian followed by extensive lithospheric thinning and craton destruction in the Mesozoic. Here we present evidence for magma mixing and mingling associated with the Mesozoic tectonic processes from the Central NCC, along the Trans-North China Orogen, a paleo suture along which the Eastern and Western Blocks were amalgamated at end of Paleoproterozoic. Our investigations focus on two granitoids – the Chiwawu and the Mapeng plutons. Typical signatures for the interaction of mafic and felsic magmas are observed in these plutons such as: (1) the presence of diorite enclaves; (2) flow structures; (3) schlierens; (4) varying degrees of hybridization; and (5) macro-, and micro-textures. Porphyritic feldspar crystals show numerous mineral inclusions as well as rapakivi and anti-rapakivi textures. We present bulk chemistry, zircon U–Pb geochronology and REE data, and Lu–Hf isotopes on the granitoids, diorite enclaves, and surrounding basement rocks to constrain the timing of intraplate magmatism and processes of interaction between felsic and mafic magmas. Our LA-ICP-MS zircon U–Pb data show that the pophyritic granodiorite was emplaced at 129.7 ± 1.0 Ma. The diorite enclaves within this granodiorite show identical ages (128.2 ± 1.5 Ma). The basement TTG (tonalite–trondhjemite–granodiorite) gneisses formed at ca. 2.5 Ga coinciding with the major period of crustal accretion in the NCC. The 1.85 Ga age from zircons in the gabbro with positive Hf isotope signature may be related to mantle magmatism during post-collisional extension following the assembly of the Western and Eastern Blocks of the NCC along the Trans-North China Orogen. Our Hf isotope data indicate that the Neoarchean–Paleoproterozoic basement rocks were derived from complex sources of both juvenile magmas and reworked ancient crust, whereas the magma source for the Mesozoic units are dominantly reworked basement rocks. Our study provides a window to intraplate magmatism triggered by mantle upwelling beneath a paleosuture in the North China Craton.