Recent colluvial sedimentation in Jordan: fans evolving into sand ramps

Abstract High‐angle accumulations of sand and escarpment‐derived gravel along the outcrop walls of Plio‐Pleistocene sandstones, eastern Jordan, form small, coalesced colluvial fans, built by rockfalls, rockfall‐derived debris flows, dry sandfalls and sandy grainflows. These deposits are sourced through wind erosion of fault‐controlled outcrops of weakly cemented sandstone and a hard, gypsum‐cemented sandstone and fine conglomerate caprock exposed in sandpits. Eroded sediment is supplied to the fans directly as rockfalls and sandfalls, and indirectly as gully‐confined sandy grainflows. The preserved colluvium fans comprise sandy, matrix‐rich rockfall, rockfall‐derived, dry debris‐flow lenticular gravel deposits and minor lenticular sandy grainflow deposits. The fans develop initially against the footwall escarpment and, as erosion continues, the outcrop and the fans become covered by stable sand sheet ramps in a self‐regulatory geomorphic system. Preserved fan–sand ramp systems in eastern Jordan are characterized by a threefold hierarchy of genetically related bounding surfaces, which develop over short time scales. Rapid fault‐controlled uplift and/or rapid stream incision may produce non‐equilibrium scarp faces, identical to those in the sandpits, associated with the colluvial fan–sand ramp systems. Thus, such systems have the potential to identify fault‐related unconformities, rapid uplift events and episodes of rapid downcutting in the rock record. Colluvium deposits have good preservation potential, but are often associated with complex, coarse, basin‐margin facies, and are thus difficult to identify in the stratigraphic record; a problem exacerbated by the lack of adequate colluvium facies models and diagnostic sedimentary criteria.     

Sedimentology of gravelly Lake Lahontan highstand shoreline deposits,Churchill Butte,Nevada, USA

Gravelly shoreline deposits of the latest Pleistocene highstand of Lake Lahontan occur in pristine depositional morphology, and are exposed in gravel pits along Churchill Butte in west-central Nevada. Four environments differentiated at this site are alluvial fan/colluvium, lakeshore barrier spit, lake lower-shoreface spit platform, and lake bottom. Lakeshore deposits abut, along erosional wave headcuts, either unsorted muddy to bouldery colluvium fringing Churchill Butte bedrock, or matrix-supported, cobbly and pebbly debris-flow deposits of the Silver Springs fan. The lakeshore barrier spit is dominated by granule pebble gravel concentrated by wave erosion of the colluvial and alluvial-fan facies. The lakeward side of the barrier consists of beachface deposits of well-sorted granules or pebbles in broad, planar beds 1–10 cm thick and sloping 10–15°. They interfinger downslope with thicker (10–25 cm) and less steep (5–10°) lakeward-dipping beds of fine to medium pebble gravel of the lake upper shoreface. Interstratified with the latter are 10–40-cm-thick sets of high-angle cross-beds that dip southward, alongshore. Higher-angle (15–20°), landward-dipping foresets of similar texture but poorer sorting comprise the proximal backshore on the landward side of the barrier. They were deposited during storm surges that overtopped the barrier berm. Gastropod-rich sand and mud, also deposited by storm-induced washover, are found landward of the gravel foresets in a 15-m-wide backshore pond. Algal stromatolites, ostracodes, and diatoms accumulated in this pond between storm events. The lake lower shoreface, extending from water depths of 2 to 8 m, consists of a southward-prograding spit platform built by longshore drift. The key component of this platform is large-scale sandy pebble gravel in 16° southward-dipping `Gilbert' foresets that grade at a water depth of about 6–7 m to 4°-dipping sandy toesets. A shift from bioturbated lower-shoreface sand and silt, to flat and laminated lake-bottom silt and mud, occurs between water depths of 10–40 m and over a shore-normal distance of ≥250 m. This lake-bottom mud facies, unlike the others, is areally expansive.     

Depositional environments of some Pleistocene coastal terrace deposits,southwestern Oregon—case history of a progradational beach and dune sequence

Pleistocene coastal terrace deposits exposed in sea cliffs near Gold Beach, Oregon can be divided into four stratigraphic units: a basal gravelly unit and three overlying sandy units, each with mud beds, a paleosol, or the modern soil in its uppermost part. The gravelly unit consists of gravel and sand in its lower part, sand, in part pebbly or cobbly, in its middle part, and mud and sand in its upper part. Black sand and transported pieces of wood are common in the middle part of the unit, and wood is common in the mud. This unit is interpreted as a progradational deposit including environments ranging from lower forebeach at the base to backbeach flats and streams at the top.The main sandy parts of the sandy units are made up of a crossbedded sand facies, the dominant structure in which is medium-scale crossbedding, and an irregularly bedded sand facies, which is locally pebbly and is dominated by scour-and-fill structures. Deciding between shallow marine and eolian interpretations of the sandy units proved exceptionally difficult until modern analogues were found in the fine details of the internal structures. Largely on the basis of such structural details, the crossbedded sand facies is interpreted as the product of small eolian dunes, and the irregularly bedded sand facies is interpreted as deposits of interdune ephemeral streams, ephemeral ponds, and wet to dry subaerial flats. The mud beds and paleosols at the tops of the sandy units represent times of temporary stabilization of the dune field.     

Postglacial colluvium in western Norway: depositional processes, facies and palaeoclimatic record

The postglacial Quaternary colluvial systems in western Norway are arrays of steep fans, often coalescing into aprons, developed along the slopes of valley sides and fjord margins. The coarse debris, derived from weathered gneissic bedrock and its glacial-till mantle, varies from highly immature to mature. The depositional processes are mainly avalanches, ranging from rockfalls and debrisflows to snowflows, but include also waterflow and debris creep. The mechanics and sedimentary products of these processes are discussed, with special emphasis on snow avalanches, whose role as an agent of debris transport is little-known to sedimentologists. The subsequent analysis of sedimentary successions is focused on colluvial-fan deltas, which are very specific, yet little-studied, coastal depositional systems. The stratigraphic variation and depositional architecture of the colluvial facies assemblages, constrained by abundant radiometric dates, are used to decipher the signal of regional climatic changes from the sedimentary record. The stratigraphic data from two dozen local colluvial successions are compiled and further compared with other types of regional palaeoclimatic proxy record. The analysis suggests that the colluvial systems, although dependent upon local geomorphic conditions, have acted as highly sensitive recorders of regional climatic changes. The study as a whole demonstrates that colluvial depositional systems are an interesting and important frontier of clastic sedimentology.     

Structures and textures in Triassic braided stream conglomerates ('Bunter' Pebble Beds) in the Sherwood Sandstone Group, North Staffordshire, England

ABSTRACT In the northern parts of the Needwood and Stafford/Eccleshall Basins, England, the Pebble Beds of the Sherwood Sandstone Group contain thick successions of texturally mature, fluvial pebble/cobble conglomerates which are organized into either horizontal or cross-stratified sets. The horizontally lying sets, generally coarser grained and more poorly sorted than the cross-bedded sets, are usually disorganized and either matrix- or clast-supported, although thin lenses of well-sorted, occasionally openwork units, interpreted as falling stage phenomena, are often present. The cross-stratified conglomerates have foresets exhibiting remarkable textural organization, with a coarse, bimodal (sometimes matrix-supported) part grading upwards or being abruptly overlain by a finer, well-sorted (occasionally openwork) part and finally capped by sandstone. These rhythmic textural changes are attributed partly to an avalanche process at high stage and partly to falling stage conditions. The most common types of vertical association are thick successions of horizontally bedded conglomerates (up to 20 m) and sequences of an upwards coarsening nature (2-12 m) in which cross-stratified sets are overlain by flat-lying sets. The environment of deposition of the gravels is interpreted as one in which water depths at high stage were greater than depths in most modern braided stream plains (proglacial or alluvial fan) but shallower than depths associated with the Pleistocene catastrophic floods from which texturally mature, giant gravel bars have been recorded. Recent braided streams with relatively confined channels and considerable bar/channel relief are better analogues. In particular, medial or mid-channel bars with a two-tier structure (subaqueous and partly emergent portions) may explain the upward-coarsening sequences in which horizontally lying conglomerates overlie cross-stratified conglomerates. The thicker sequences of horizontally stratified conglomerates represent proximal, longitudinal bar deposits. Sheets of pebbly sandstone and argillaceous sandstone lying between the conglomerates, and commonly occurring towards the top of the succession, largely represent deposition from sandwaves and dunes. Finer, interbedded, argillaceous sandstones, siltstones and mudstones are interpreted as overbank and waning-flood deposits. Basin-forming tectonism of increasing intensity probably caused the initial coarsening upwards of the lower part of the succession, whilst more stable tectonic conditions and decreasing relief on the margins of the basins and in the areas of provenance in the Midlands and the Hercynides, account for the upwards-fining of the upper part of the succession.     

La stratigraphie du Pleistocène supérieur et de l'Holocène dans le Golfe de Gascogne: Essai de synthèse des critères actuellement utilisables

Using analysis of marines cores from the Bay of Biscay as a basis, a system of different episodes of the Upper Pleistocene and the Holocene in the area of the Bay is presented. These episodes are characterized by several sedimentological and micropaleontological observations and particularly by the analysis of the coiling ratio of a few species of planktonic foraminifera. From the cores it is thus possible to determine the Holocene, the Würmian with its four glacial and three interglacial stages, and, at the base of the last glacial stage, the Riss-Würm interglacial or its upper level.     

川西凹陷地区更新统砾石层沉积成因探讨

笔者通过野外地质调查和相关资料,从宏观形态和沉积特征多方面对川西凹陷地区的更新统砾石层的成因进行综合分析.发现各时期更新统砾石层平面上均呈扇状,具多级阶地.各砾石层的岩性结构柱、基本层序、砾石的组构特征均表现为河流相冲洪积成因.并通过ESR和孢粉、充填序列和地貌标志探讨了区内各更新统砾石层的沉积时代、古气候特征.综合研究表明区内存在4套不同特征的更新统砾石层,它们不仅在空间位置上存在密切联系,而且在沉积特征和形成时代上也具继承性.沉积环境均为温暖潮湿热环境下,出龙门山的古青衣江在盆地中不同时期、不同位置的沉积响应.并反演古青衣江水系在前陆盆地中不同时期的迁移及变化规律.     

Some slope stability problems in soils derived from the Ecca Shales of Natal,South Africa

Shales of the Lower Ecca stage of the Late Palaeozoic Series are actively degrading in the particular topography and climate of Natal. The failure of a large road embankment near Pietermaritzburg and the subsequent failure of the adjacent natural slope were caused by movement along existing shear zones in the underlying colluvium. Other cases of instability in both natural slopes and engineering earthworks are known, in the Pietermaritzburg and Durban areas and elsewhere in Natal. These failures in various types of slope in different parts of Natal suggest an inherent instability in colluvial and residual soil derived from shale of the Lower Ecca stage.     

The ‚loess’︁ section at Borden,Kent, SE England

A 5.3m profile originally described as loess with a buried interglacial soil is reinterpreted from petrographic evidence and thermoluminescence dating as a Holocene colluvial accretionary soil. Mineralogical analyses of coarse silt (16–63 μm) fractions suggest that most of the silty colluvium was derived from weathered Thanet Beds upslope, though some loess was incorporated during the final depositional phase. Thin sections show that clay illuviation occurred penecontem-poraneously with deposition of colluvium. Thermoluminescence properties suggest partial optical bleaching of the grains during rapid deposition, which is consistent with a Holocene colluvial origin.     

The depositional Environment at Shuidonggou Locality 2 in Northwest China at ~72–18 kaBP

Shuidonggou site has abundant Paleolithic remains of Late Pleistocene deposition. Studying the evolution of depositional environments is essential to the comprehensive understanding of the living conditions of ancient populations. To reconstruct the depositional environment at Shuidonggou, we carried out archaeological excavations and collected systematic deposition samples at the key position of Shuidonggou Locality 2 for grain size analysis and sporopollen statistics. The environmental evolution around the Shuidonggou site generally underwent four stages at ~72–18 kaBP. During the first stage (~72–41 kaBP), the river developed with gravel and sand stratums. During the second stage (41~34 kaBP), a swamp with numerous aquatic plants formed. In the third stage (34–29 kaBP), site formation was characterized by shallow lake depositional conditions; the climate was relatively warm and humid. The marginal bank depositional conditions deteriorated during the fourth stage (29–18 kaBP), and the site underwent several dry events; the climate also became drier and colder.     

THE CENOZOIC GEORECORDS IN THE NORTHWEST OF YUNNAN AND THE EVOLUTION OF QING—ZANG PLATEAU

THE CENOZOIC GEORECORDS IN THE NORTHWEST OF YUNNAN AND THE EVOLUTION OF QING—ZANG PLATEAU     

The identified origin of a linear slope near Chi–Chi earthquake rupture combining 2D, 3D resistivity image profiling and geological data

A slope on the west border of the foothill near 921 surface rupture (caused by the 1999 Chi-Chi earthquake) in central Taiwan shows distinctive topographic expression that was prone to be considered as a fault scarp formed by a preexisting active fault. The 2D and 3D resistivity images clearly delineate rock surfaces which show steep, deep, gentle, and subvertical displacement beneath the slope, the toe of slope, the non-lateritic terrace, and 921 surface rupture, respectively, which can be attributed to the significant contrast of resistivity between gravel and rock. The horizontal sand bed and clast-supported gravel were deposited in a fluvial environment, whereas wedge-shaped gravel and colluvium were scarp-induced colluvial deposits in the trench profile. The layers shown in the depth of excavation, except for rock, has no offset or disturbance by fault ever since at least 2,480 ± 50 year B.P., based on carbon 14 dating of charcoal sample at the bottom of trench profile. According to information from two boreholes close to the slope, an over 20-m-thick marker bed with transported shell fragments, was found for correlation. This correlation further implies the slope was not formed by fault. On the other hand, two boreholes which are far from the slope and located on the flat non-lateritic terrace frequently show fractured and sheared features. By comparison, the locations around these two boreholes indicate a reverse fault or faults that occurred before the deposition of gravel. Later on, the paleostream was developed along the foot of fault scarp that was subjected to erosion and led to subsequent retrogression or retreat of the slope. Consequently, the incision of paleostream is believed to be responsible for the high relief of rock surface around the slope. Furthermore, from resistivity and borehole data, the rock surface underlying terrace is gentle where no faults occur after the deposition of gravel. The result of RIP crossing the 921 surface rupture displays about 10 m difference in elevation of rock surface on both sides, which is greater than that of 3–4 m caused by Chi-Chi earthquake. This indicates that the 921 surface rupture is a preexisting thrust fault that resulted from several thrusting events since terrace gravel was deposited. So it is not necessary to establish an extra restricted zone for construction in study area, except close to the 921 surface rupture.     

Sedimentary processes and facies of the waterlaid Anvil Spring Canyon alluvial fan, Death Valley, California

The Anvil Spring Canyon fan of the Panamint Range piedmont in central Death Valley was built entirely by water-flow processes, as revealed by an analysis of widespread 2- to 12-m-high stratigraphic cuts spanning the 9·7 km radial length of this 2·5–5·0° sloping fan. Two facies deposited from fan sheetfloods dominate the fan from apex to toe. The main one (60–95% of cuts) consists of sandy, granular, fine to medium pebble gravel that regularly and sharply alternates with cobbly coarse to very coarse pebble gravel in planar couplets 5–25 cm thick oriented parallel to the fan surface. The other facies (0–25% of cuts) comprises 10- to 60-cm-thick, wedge-planar and wedge-trough beds of pebbly sand and sandy pebble gravel in backsets sloping 3–28°. Both facies are interpreted as resulting from rare, sediment-charged flash floods from the catchment, and were deposited by supercritical standing waves of expanding sheetfloods on the fan. Standing waves were repeatedly initiated, enlarged, migrated, and then terminated either by gradually rejoining the flood or by more violent breakage and washout. The frequent autocyclic growth and destruction of standing waves during an individual sheetflood resulted in the deposition of multiple coarse and fine couplet and backset sequences 50–250 cm thick across the active depositional lobe of the fan. Erosional intensity during washout of the standing wave determined whether early-phase backset-bed deposits or washout-phase sheetflood couplet deposits were selectively preserved in a given cycle. Two minor facies are also found in the Anvil fan. Pebble–cobble gravel lags (0–20% of cuts) are present above erosional scours into the sheetflood couplet and backset deposits. They consist of coarse gravel concentrated through fine-fraction winnowing of the host sheetflood facies by sediment-deficient water flows. This reworking occurred during recessional flood stage or from non-catastrophic discharge during the long intervals between major flash floods. This facies is common at the surface, giving rise to a ‘braided-stream’ appearance. However, it is stratigraphically limited, present as thin, continuous to discontinuous beds or lenses that bound 50- to 250-cm-thick sheetflood sequences. The other minor facies of the Anvil fan consists of clast-supported and imbricated, thickly stratified, pebbly, cobbly, boulder gravel present in narrow, radially aligned ribbons nested within sheetflood deposits. This facies is interpreted as representing deposition in the incised channel of the fan, a subenvironment characterized by greater flow competence resulting from maintained depth from channel-wall confinement, and by more frequent water flows and winnowing events caused by its direct connection with the catchment feeder channel.     

Sedimentary architecture and 3D ground-penetrating radar analysis of gravelly meandering river deposits (Neckar Valley, SW Germany)

Sedimentological outcrop analysis and sub‐surface ground‐penetrating radar (GPR) surveys are combined to characterize the three‐dimensional sedimentary architecture of Quaternary coarse‐grained fluvial deposits in the Neckar Valley (SW Germany). Two units characterized by different architectural styles are distinguished within the upper part of the gravel body, separated by an erosional unconformity: (i) a lower unit dominated by trough‐shaped depositional elements with erosional, concave‐up bounding surfaces that are filled by cross‐bedded sets of mainly openwork and filled framework gravel; and (ii) an upper unit characterized by gently inclined sheets of massive and openwork gravels with thin, sandy interlayers that show lateral accretion on a lower erosional unconformity. The former is interpreted as confluence scour pool elements formed in a multi‐channel, possibly braided river system, the latter as extensive point bar deposits formed by the lateral migration of a meandering river channel. The lateral accretion elements are locally cut by chute channels mainly filled by gravels rich in fines, and by fine‐grained abandoned channel fills. The lateral accretion elements are associated with gravel dune deposits characterized by steeply inclined cross‐beds of alternating open and filled framework gravel. Floodplain fines with a cutbank and point bar morphology cover the gravel deposits. The GPR images, revealing the three‐dimensional geometries of the depositional elements and their stacking patterns, confirm a change in sedimentary style between the two stratigraphic units. The change occurred at the onset of the Holocene, as indicated by ¹⁴C‐dating of wood fragments, and is related to a re‐organization of the fluvial system that probably was driven by climatic changes. The integration of sedimentological and GPR results highlights the heterogeneity of the fluvial deposits, a factor that is important for modelling groundwater flow in valley‐fill aquifers.     

Slip rates on the Helike Fault, Gulf of Corinth, Greece: new evidence from geoarchaeology

Palaeoseismological and archaeological analysis of a trench enabled us to estimate the Holocene slip rates on the East Helike Fault, flanking the south-western Gulf of Corinth. We recognized two major fault strands within the trench: the ‘north fault’ controls a succession of three colluvial wedges and the deposition of a 2.7 m thick sedimentary sequence. The ‘south fault’ controls the deposition of a 2.9-m thick brownish-red colluvium. Based on colluvial stratigraphy, radiocarbon dating of the sediments suggests that the slip rate was c. 0.3 mm yr⁻¹ from 10 250 to c. 1400 bp , when it increased dramatically to c. 2.0 mm yr⁻¹ after a strong earthquake event near 1400 bp . The faster slip rate evidently increased the sedimentation rate.     

对泥河湾地层的认识与划分

泥河湾地层之命名乃巴尔博(C.B.Barbour)、桑志华(E.Licent)、德日进(P Teillhard de Chardin)等人于1924-1926年在我国河北省阳原县泥河湾一带进行新生代地质调查时所定。当时认为其时代属保德期之后黄土期之前。     

Morphological evolution of gold nuggets in proximal sedimentary environments,southern New Zealand

A rare collection of centimetre-scale proximal gold nuggets has been examined in the context of the Late Pleistocene to Holocene eluvial and colluvial sediments in which they occur, in a range of environments from arid temperate to periglacial. Liberation of supergene nuggets from their basement source in fault zones occurred progressively by physical erosion as the host basement rocks were uplifted between middle Miocene and Holocene. The host sediments are made up of poorly sorted angular greenschist facies schist debris. Some nuggets were recycled through several generations of these colluvial deposits, and additional nuggets were liberated to younger sediments during this time. The nuggets did not migrate laterally more than a few tens of metres during this repeated recycling, and were passively elevated vertically with the rising basement on to the crest and slopes of a 1600 m high mountain range. The most recently liberated nuggets retain almost all the morphological features of their supergene origin, including coarse (cm scale) crystal shapes, delicate crystalline internal structure, and imprints of oxidised pyrite crystals. Minor transport in colluvium has caused some abrasion and rounding of gold crystals. Repeated recycling progressively obscured the crystal shapes, although relict crystals are still recognisable on parts of most nuggets. Differential timing of liberation from basement has resulted in a wide range of rounding effects in groups of closely-coexisting nuggets. Variably crystalline gold overgrowths (micron scale) coat abraded surfaces of all or part of most nuggets, commonly intergrown with authigenic smectite clay minerals. These overgrowths developed from alkaline groundwater (pH 7–9) that had undergone extensive chemical interaction with labile minerals in the host colluvium. Abrasion during recycling removed some of the overgrowths, but this was replaced in the new sedimentary hosts. Physical and chemical processes affecting nuggets in these sediments have similarly affected eluvial and colluvial nuggets in a wide range of settings around the world, including Yukon (Canada), California (USA) and arid parts of Australia.     

CLIMATIC ZONES OF THE PLEISTOCENE

Although much emphasis has been placed on the effects of Pleistocene ice sheet as the determinant of Pleistocene climate in Europe, only through the combined evaluation of all useful climatic indicators can Pleistocene climatic zones be differentiated. The relationships between a paleoclimatically determined snowline and polar treelines and extent of loess deposition, determined stratigraphically, botanically, and morphologically, also indicate climatic conditions of Pleistocene Europe. Five great climatic-morphologic and plant-geographic zones, namely, forest-rubble tundra, forest tundra, loess tundra, loess steppe, and loess-forest steppe, may be distinguished. Considering these factors and their characteristics and spatial and temporal extents, it is possible to chronologically present the differentiation of the Würm glacial period independent of the retardation effect of ice sheets. --G. E. Denegar.     

ALLUVIAL STYLES AND ARCHITECTURE AS GUIDES TO CENOZOIC TECTONIC AND ENVIRONMENTAL EVENTS AT THE NORTHERN MARGINS OF THE QINGHAI—XIZANG PLATEAU

ALLUVIAL STYLES AND ARCHITECTURE AS GUIDES TO CENOZOIC TECTONIC AND ENVIRONMENTAL EVENTS AT THE NORTHERN MARGINS OF THE QINGHAI—XIZANG PLATEAU     

萨拉乌苏动物群有关属种的修订与讨论

随着地层学和年代学工作的深入开展,对萨拉乌苏河地区的地层划分愈加仔细;原含萨拉乌苏动物群的地层现在被划分为下部的萨拉乌苏组和上部的城川组。相应地,过去的萨拉乌苏动物群也被划分为萨拉乌苏动物群和城川动物群;而萨拉乌苏动物群又被进一步划分为下部组合和上部组合,下部组合含王氏水牛和诺氏古菱齿象化石,与欧洲的末次间冰期对应;上部组合以野驴和披毛犀为主,与末次冰期第一阶段对应。但对萨拉乌苏河地区晚更新世动物群中有些属种的分类命名问题,一直未达成共识,有些甚至存在错误认识。关于萨拉乌苏动物群是否含有肿骨大角鹿的问题,争论持续了近20年。最新研究表明,在萨拉乌苏组中发现的两件有肿厚现象的大角鹿下颌骨,应当归入河套中国大角鹿(Sinomegaceros ordosianus),而非肿骨大角鹿。因为,下颌骨肿厚是大角鹿类所有种的共有特征。过去很多文献中提到萨拉乌苏动物群中有"蒙古鹿",经笔者核对,该名称最早被用于"大角鹿蒙古变种"(Cervus megacerosvar.mongoliae)和"蒙古马鹿"(Cervus mongoliae);但这两个名称后来均被弃置不用。关于萨拉乌苏动物群中的恰克图转角羚羊,后来曾有人将其转入许家窑扭角羚,经笔者研究,认为萨拉乌苏河地区的转角羚羊应保持原有名称,即恰克图转角羚羊。