柴北缘阿日特克山斑岩型铜钼矿床流体包裹体、稳定同位素特征及其地质意义

阿日特克山铜钼矿床位于柴北缘中北段,为近年来新发现的隐伏斑岩型矿床,矿体产出于海西晚期—印支期花岗闪长（斑）岩和古元古代达肯大坂岩群接触部位。为探讨该矿床成矿流体特征和成矿机制,本文对矿床野外地质特征、流体包裹体及稳定同位素组成进行了系统的研究。根据不同类型矿脉之间的相互关系,可将热液成矿期次划分为成矿早期石英阶段、成矿期辉钼矿-多金属硫化物-石英阶段和成矿晚期石英-方解石阶段。流体包裹体岩相学研究表明,阿日特克山铜钼矿床流体包裹体以Ⅰ型（富液相L+V两相水溶液包裹体）、Ⅱ型（富气相L+V两相水溶液包裹体）和Ⅲ型（含子矿物三相水溶液包裹体）为主。显微测温及包裹体拉曼光谱分析结果显示,成矿流体体系为中高温、中低盐度、中高密度的NaCl-H₂O体系,至成矿晚期,流体性质变化为低温、低盐度、高密度流体,矿床形成深度为0.40~4.00 km。氢氧同位素分析测试结果显示,δD_V-SMOW值为-92.9‰~-78.4‰,δ¹⁸O_H2O值为-7.4‰~2.0‰,表明成矿流体以混合流体为主,随着成矿流体的演化,有更多的大气降水不断混入。矿石中金属硫化物δ³⁴S值处于9.4‰~11.7‰之间,平均值为10.2‰,表现出明显的地层硫特征,为岩浆热液与围岩地层相互作用所致。综上认为,阿日特克山铜钼矿床为矽卡岩型-斑岩型矿床,形成于海西晚期—印支期俯冲碰撞构造环境,混合成矿流体强烈的不混溶作用为斑岩型铜钼矿床形成的主要机制。     

甘肃拾金坡金矿床成因:来自40Ar/39Ar定年、成矿流体及H-O-S同位素证据

甘肃拾金坡金矿床是北山造山带南部的一处重要中型金矿床。矿体以石英脉和蚀变岩形式产出,受东西向断裂控制,赋矿围岩为早泥盆世拾金坡二长花岗岩。矿石中主要金属硫化物为黄铁矿及少量方铅矿、闪锌矿和磁黄铁矿。石英脉两侧花岗岩发生强烈的硅化、黄铁绢英岩化和绿泥石化。热液蚀变绢云母40 Ar/39 Ar坪年龄为(364.6±3)Ma,表明成矿作用发生在晚泥盆世。矿石石英中流体包裹体可分为早晚两期:早期流体包裹体群包含不同气液比水溶液包裹体和含CO2包裹体,指示成矿过程存在流体沸腾作用,其均一温度集中在280～325℃,盐度(w(NaCl))为7.86%～9.21%;晚期流体包裹体群只发育水溶液包裹体,均一温度集中于160～230℃,盐度为9.47%～11.10%。成矿流体属中温低盐度、富CO2流体。流体从早阶段演化到晚阶段,温度降低约100℃,压力由约113 MPa骤减到约11 MPa。流体包裹体的δ18 OH2O值为1.39‰～3.39‰,δD值为-71‰～-99‰。氢氧投图中,石英脉和蚀变岩样品构成良好的线性关系,暗示初始成矿流体主要来自变质热液,晚期有强烈大气降水加入。矿石金属硫化物δ34S值变化范围为4.44‰～11.33‰,峰值为8‰～9‰,呈塔式分布。与区域S同位素资料对比分析表明,石英脉型矿石S主要来自前寒武系基底,蚀变岩型矿石S更多地继承了花岗岩围岩S。综合分析认为,拾金坡金矿床属于造山型金矿,形成于造山晚期挤压—伸展转换环境。     

黑龙江省岔路口斑岩钼矿床流体包裹体和稳定同位素特征

岔路口超大型斑岩钼矿床位于大兴安岭北部,是目前中国东北地区最大的钼矿床,矿体赋存于中酸性杂岩体及侏罗系火山-沉积岩内,其中花岗斑岩、石英斑岩、细粒花岗岩与钼矿化关系密切.流体包裹体研究表明,岔路口矿床主要发育富液两相包裹体、富气两相包裹体和含子矿物多相包裹体.花岗斑岩石英斑晶中流体包裹体的形成温度集中在230 ～ 440℃和470～510℃两个温度区间,盐度分别介于0.7％ ～ 53.7％ NaCl eqv和6.2％～61.3％ NaCl eqv两个区间;成矿早阶段钾长石-石英-磁铁矿脉中流体包裹体的形成温度集中在320～440℃、盐度介于4.2％ ～ 52.3％NaCl eqv;成矿中阶段石英-辉钼矿脉和角砾岩中流体包裹体的形成温度集中在260～410℃、盐度介于0.4％～52.3％ NaCleqv;成矿晚阶段石英-萤石-方铅矿-闪锌矿脉中流体包裹体的形成温度集中在170～320℃、盐度介于0.5％ ～ 11.1％ NaCleqv.成矿流体具高温、高盐度及高氧逸度的特征,总体上属于富F的H2O-NaCl±CO2体系.成矿流体的δ 18Ow值为-4.5‰～3.2‰,δDw值为-138‰～-122‰,表明成矿流体为岩浆水与雨水的混合流体.金属硫化物的δ34S值介于-1.9‰～+3.6‰,均值为+1.6‰,表明成矿物质主要来自深源岩浆.多期次的流体沸腾作用是该矿床的主要成矿机制.     

滇西北衙斑岩型金多金属矿床成矿流体特征及其演化

北衙超大型金多金属矿床位于扬子陆块西缘与三江特提斯造山带的结合部位。本文通过对北衙矿区内的斑岩体石英斑晶、斑岩型矿化、矽卡岩矿化中的矽卡岩及外围似层状热液型铅锌银矿化的岩(矿)石中发育的流体包裹体进行了系统研究,发现北衙矿区内主要发育CO2、富CO2、含CO2、含子矿物三相、富气相水溶液及气液两相水溶液包裹体六类流体包裹体;与斑岩型矿化有关的成矿流体为中-高温Na Cl-H2O-CO2体系热液,矽卡岩矿化相关成矿流体为一种高温的Na Cl-H2O及Na Cl-H2O-CO2体系热液,而外围似层状铅锌银矿化相关的成矿流体则为中温的Na Cl-H2O-CO2体系热液。对比分析表明,矽卡岩矿化中的矽卡岩矿物(以绿帘石类矿物为主)形成较早,其中发育富气相的流体包裹体,可以推断岩浆侵位后先分异出富水蒸气的流体,此后CO2才从成矿流体中大量分异。斑岩型矿化及外围地层中似层状铅锌银矿化脉体中发育的流体包裹体与斑岩体石英斑晶内发育的流体包裹体组合类型基本一致,表明成矿流体主要来自斑岩体结晶分异出的岩浆热液。流体包裹体研究表明,北衙金多金属矿区内的矽卡岩型(金铜铁)、斑岩型(铜金钼)及外围碳酸盐岩等地层中的似层状热液型(铅锌银)矿床系列为与富碱斑岩体侵位活动有关的,由岩浆分异热液并逐渐演化形成的斑岩型金-铁铜-铅锌(银)多金属成矿系统。     

西藏邦铺斑岩矽卡岩矿床成矿流体特征——来自流体包裹体及C_H_O同位素的制约

选取西藏冈底斯斑岩成矿带东段的邦铺矿床斑岩矿区2条勘探线上的11个钻孔,进行了详细的岩芯编录和矿物组合、脉体穿切关系研究,将该矿床内与斑岩成矿相关的脉体划分为A、B、D脉3种类型。通过对矽卡岩矿区的详细地表及平硐观察,发现了石榴子石、阳起石、绿帘石等一系列代表流体演化特征的矿物。邦铺矿床具有典型斑岩型矿床的蚀变分带特征,从中心向外依次表现为黑云母化-硅化-绢云母化-青磐岩化,泥化呈"补丁状"无规则分布在绢云母化和青磐岩化之上。矽卡岩化则以典型矽卡岩矿物的出现为特征。A脉中绝大多数包裹体均一温度为320~550℃,盐度主要集中在两个区间内,分别为17.0%~22.0%(气液两相包裹体)和30.8%~67.2%(含子晶包裹体);B脉中绝大多数包裹体均一温度为380~550℃,盐度主要集中在1.6%~10.1%、23.2%~24.5%(气液两相包裹体)和30.8%~67.2%(含子晶包裹体)3个区间内;D脉中绝大多数包裹体均一温度为213~450℃,盐度为7.3%~11.6%。流体包裹体研究表明,与斑岩成矿的相关流体具有从高温、高盐度向低温、低盐度演化的特征;形成A、B脉的流体发生了强烈的沸腾作用,由此导致的压力波动是Mo、Cu沉淀的主要原因。16件与斑岩成矿相关的石英δDV-SMOW=-107.1‰~-185.8‰,δ18OV-SMOW=9.5‰~14.5‰;15件与矽卡岩成矿相关的石榴子石、绿帘石、石英及方解石δDV-SMOW=-184.7‰~-126‰,δ18OV-SMOW=3.9‰~12.9‰;4件斑岩成矿后期的方解石δ18OV-SMOW=-1.6‰~10.4‰,δCV-PDB=-6.5‰~-3.4‰;6件与矽卡岩成矿相关的方解石δ18OV-SMOW=1.8‰~11.9‰,δCV-PDB=-5.1‰~4.6‰。C_H_O同位素分析数据表明,邦铺整个斑岩-矽卡岩成矿系统流体主要经历了岩浆脱水去气和大气降水加入这两大地质过程。     

江西香炉山矽卡岩型钨矿床流体包裹体研究

从江西西北部至安徽南部发育一条显著的斑岩-矽卡岩型钨成矿带,香炉山是其中一典型的矽卡岩钨矿床。矿床具有明显的矿化分带特征,由近接触带矽卡岩和云英岩矿体和远接触带脉状石英-硫化物-白钨矿和透镜状矿体组成。通过对不同蚀变带上矿石矿物和脉石矿物的流体包裹体显微测温分析表明:矽卡岩中的流体包裹体的均一温度范围在209～383℃,脉状石英-白钨矿和石英-硫化物-白钨矿中流体包裹体的均一温度范围分别为163～278℃和204～284℃,晚期方解石脉的温度最低为143～235℃;矽卡岩中的流体包裹体的盐度范围在0.35%～5.26%NaCleqv,脉状石英-白钨矿和石英-硫化物-白钨矿中流体包裹体的盐度范围分别为0.35%～5.86%NaCleqv和0.70%～9.21%NaCleqv,晚期方解石脉的盐度为0.35%～2.07%NaCleqv。激光拉曼探针测试表明,矽卡岩、石英-白钨矿脉和石英-硫化物-白钨矿脉中流体包裹体组分主要为H2O,还含有一定量CH4和少量的N2。从早期到晚期成矿阶段表现为一个降温的过程,指明了钨成矿温度较宽泛;钨在流体中可能以钨酸的形式运移,与围岩反应时,温度降低和碱性升高,促使白钨矿沉淀成矿。早期到晚期成矿流体温度和物质组成发生变化是成矿发生分带的重要原因。     

豫西银家沟硫铁多金属矿床流体包裹体和同位素特征

河南省银家沟硫铁多金属矿床位于华北克拉通南缘华熊地块内,是东秦岭地区最大的硫铁多金属矿床,以其硫铁储量大及共、伴生元素复杂区别于东秦岭其他以钼为主的矿床.成矿的全过程可以划分为矽卡岩期、硫化物期和表生期,包括磁铁矿阶段、脉状石英-辉钼矿阶段、石英-黄铁矿-黄铜矿-斑铜矿-闪锌矿阶段、网脉状石英辉钼矿阶段、石英绢云母-黄铁矿阶段、方解石-方铅矿闪锌矿阶段和玉髓褐铁矿阶段.流体包裹体研究表明,银家沟矿床主要发育气液两相水溶液包裹体(W型)、含CO2三相包裹体(C型)和含子矿物多相包裹体(S型).钾长花岗斑岩的石英斑晶中流体包裹体均一温度介于341～＞550℃之间,盐度介于0.4％～44.0％ NaCl eqv之间,属H2O-NaCl-CO2体系;脉状石英-辉钼矿阶段流体包裹体均一温度介于382～416℃之间,盐度介于3.6％～40.8％ NaCl eqv之间,属H2O-NaCl体系;石英-方解石-黄铁矿黄铜矿-斑铜矿-闪锌矿阶段流体包裹体均一温度介于318～436℃之间,盐度介于5.6％～42.4％ NaCl eqv之间,属H2O-NaCl体系;网脉状石英-辉钼矿阶段流体包裹体均一温度介于321～411℃之间,盐度介于6.3％～16.4％ NaCl eqv之间,属H2 O-NaCl体系;石英-绢云母黄铁矿阶段流体包裹体均一温度介于326～419℃之间,盐度介于4.7％～49.4％ NaCl eqv之间,属H2O-NaCl体系.银家沟矿床成矿流体主要为高温、高盐度流体,总体上属于H2O-NaCl±CO2体系.成矿热液的δ18 OH2O值为4.0‰～8.6‰,δ18 Dv-SMOW值为-64‰～-52‰,表明成矿流体来自岩浆水.矿石金属硫化物的δ18 SV-CDT值介于-0.2‰～6.3‰之间,平均为1.6‰,具深源硫特征,硫主要来自分异很差的由火成物质组成的下地壳,官道口群白云岩亦提供了部分重硫.矿床金属硫化物的206 Pb/204 Pb值介于17.331～18.043之间,207 Pb/204 Pb值变化于15.444～15.575之间,208 Pb/204 Pb值变化于37.783～38.236之间,总体上与银家沟岩体的铅同位素范围一致,暗示铅主要来自矿区内的燕山期中酸性岩体,地层在成矿过程中亦提供了少量物质.银家沟矿床属斑岩-矽卡岩型,形成于中生代EW向构造体制向NNE向构造体制转变阶段,成矿流体多期次的沸腾作用是矿质沉淀的主要机制.     

兰坪盆地科登涧脉状铜矿床地质、地球化学特征

兰坪盆地西缘发育一系列脉状铜矿床,科登涧铜矿床是其组成之一。该矿床矿体主要产出于上三叠统崔依比组(T3c)中基性火山岩内部的断层破碎带中。热液期成矿作用可大致划分为2个成矿阶段:主成矿阶段主要发育大量含铜硫化物石英脉,晚成矿阶段主要发育贫硫化物方解石脉。流体包裹体结果表明,主成矿期石英和成矿后期石英/方解石中均主要发育两相水溶液包裹体,含CO2包裹体极少出现。主成矿期石英脉中包裹体均一温度变化幅度较小,集中在180~240℃,盐度(Na Cleq,质量分数)集中在8%~14%。成矿流体主要表现出盆地热卤水的特征,这与兰坪盆地内其它Pb、Zn、Cu等贱金属矿床的成矿流体特征较为一致。成矿流体的δ18O值为3.5‰~5.5‰,δD值为-62‰~-38‰,介于岩浆水/变质水和大气降水之间。热液硫化物黄铜矿、黄铁矿、斑铜矿的δ34S值显示较低的负值(-20.8‰~-9.4‰),明显有别于赋矿围岩(安山岩)的δ34S值(11.1‰~11.6‰),推测该矿床成矿所需还原硫主要来自于地层硫酸盐。综合分析认为,该矿床成矿物质主要来源于地层,成矿流体主要为源于大气降水或建造水的盆地热卤水。     

云南南秧田钨矿床流体包裹体特征及其意义

对南秧田矽卡岩型钨矿床的石英和石榴石流体包裹体的岩相学特征研究表明,与成矿有关的包裹体主要有3类:富液相、富气相和含子晶的多相包裹体。石英包裹体均一温度范围为232～337℃,盐度w(NaCl)=0.53%～9.98%;石榴石包裹体的均一温度范围为228～306℃,盐度w(NaCl)=6.45%～14.04%。激光拉曼探针分析表明,南秧田白钨矿的成矿流体中气相成分以H2O为主,含少量CO2、CH4、H2S和N2等气体,液相成分以H2O为主,属NaCl-H2O流体体系。成矿溶液的密度为0.72～0.87g/cm3,表明形成这种矽卡岩型矿床的成矿流体均属于中温、低盐度、低密度的流体。成矿压力为18～32MPa,成矿深度约为0.6～1.2km。石英包裹体水的δD为-72.16‰～-65.10‰,δ18O为7.98‰～8.45‰,钨矿床中硫化物δ34S为6.6‰。成矿流体主要来自燕山晚期的岩浆热液作用。     

扬子地块西南缘红泥坡铜矿床成矿流体特征与铜矿化机制——来自流体包裹体和原位S同位素的证据

扬子地块西南缘红泥坡矿床是近年来新发现的大型铜矿床。本文通过流体包裹体岩相学、显微测温、激光拉曼成分分析和硫化物原位S同位素分析,揭示了红泥坡铜矿床的成矿物质来源、成矿流体来源及矿质沉淀机制。该矿床成矿过程分为火山-沉积期和热液成矿期。热液成矿期石英+方解石+硫化物阶段(Ⅰ)的石英中发育纯CO₂包裹体、水溶液-CO₂包裹体、含固相的水溶液-CO₂包裹体、含固相的水溶液包裹体以及富液相两相水溶液包裹体。各类包裹体成群分布,均一温度(106～500℃)和盐度(8.8%～59.8%)变化大。激光拉曼分析表明成矿流体中挥发分成分为H₂O、CO₂和少量CH₄。火山-沉积期黄铁矿原位δ³⁴S值为9.18‰～9.34‰,为海水硫和岩浆硫的混合硫;热液成矿期硫化物的原位δ³⁴S值为4.42‰～5.26‰,为岩浆硫和少量地层硫的混合硫。综合矿床成矿时代、流体包裹体及S同位素组成特征,认为古元古代火山-沉积作用形成含Fe和Cu的矿源...     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.