Stable Isotopes and Halogen Geochemistry of the Huayuan Carbonate-hosted Pb-Zn Ore District, South China: Implications for the Salt Source of Ore-forming Fluids

The Huayuan Pb-Zn ore district in China, located in western Hunan Province, is a giant carbonate-hosted Pb-Zn ore district. The source of ore-forming brines in this ore district remains poorly constrained. Whether the highly saline brines are derived from evaporated seawater or dissolved evaporates continues to be intensely debated. Carbonate minerals associated with Pb-Zn mineralization have δ13CV-PDB and δ18OV-SMOW values ranging from ?5.55‰ to +1.35‰ (mean value of ?0.69‰; n = 14) and +16.28‰ to +25.05‰ (mean value of +20.22‰; n = 14), respectively. This indicates that carbonate minerals are dominantly formed from dissolved ore-hosted carbonate rocks. The δ34S values of sulfides range from +20.2‰ to +36.8‰, with an average value of +30.0‰ (n = 27). These results suggest that sulfur is predominantly derived from the thermochemical sulfate reduction of marine sulfate. The crush-leach analyzed solute data of fluid inclusions in sphalerite show the ore-forming fluids have Cl/Br molar ratios range from 118 to 384, and Na/Br molar ratios from 39 to 160 (n = 8). These Cl/Br ratios of hydrothermal fluid are much lower than those of seawater (657 to 564), but are consistent with bittern brines through early halite precipitation. We propose that ore-forming fluids are mainly derived from evaporitic basin brines, which leached base metals from the basement and/or country rocks. The brine then migrated to the basin margins through clastic rocks of basement and then precipitated sul?des by thermochemical sulfate reduction.     

Isotope geochemistry of ore fluids for the Dongsheng sandstone-type uranium deposit, China

The Dongsheng sandstone-type uranium deposit is one of the large-sized sandstone-type uranium deposits discovered in the northern part of the Ordos Basin of China in recent years. Geochemical characteristics of the Dongsheng uranium deposit are significantly different from those of the typical interlayered oxidized sandstone-type uranium ore deposits in the region of Middle Asia. Fluid inclusion studies of the uranium deposit showed that the uranium ore-forming temperatures are within the range of 150–160℃. Their 3He/4He ratios are within the range of 0.02–1.00 R/Ra, about 5–40 times those of the crust. Their 40Ar/36Ar ratios vary from 584 to 1243, much higher than the values of atmospheric argon. The δ18OH2O and δD values of fluid inclusions from the uranium deposit are -3.0‰– -8.75‰ and -55.8‰– -71.3‰, respectively, reflecting the characteristics of mixed fluid of meteoric water and magmatic water. The δ18OH2O and δD values of kaolinite layer at the bottom of the uranium ore deposit are 6.1‰ and -77‰, respectively, showing the characteristics of magmatic water. The δ13CV-PDB and δ18OH2O values of calcite veins in uranium ores are -8.0‰ and 5.76‰, respectively, showing the characteristics of mantle source. Geochemical characteristics of fluid inclusions indicated that the ore-formation fluid for the Dongsheng uranium deposit was a mixed fluid of meteoric water and deep-source fluid from the crust. It was proposed that the Jurassic-Cretaceous U-rich metamorphic rocks and granites widespread in the northern uplift area of the Ordos Basin had been weathered and denudated and the ore-forming elements, mainly uranium, were transported by meteoric waters to the Dongsheng region, where uranium ores were formed. Tectonothermal events and magmatic activities in the Ordos Basin during the Mesozoic made fluids in the deep interior and oil/gas at shallow levels upwarp along the fault zone and activated fractures, filling into U-bearing clastic sandstones, thus providing necessary energy for the formation of uranium ores.     

Helium and argon isotopic compositions of the Longquanzhan gold deposit in the Yishu fault zone and their geological implications

The Longquanzhan gold deposit hosted in granitic cataclasites with mylontization of the foot wall of the main Yishui-Tangtou fault. 3He/4He ratios in fluid inclusions range from 0. 14 to 0. 24 R/Ra,close to those of the crust-source helium. 40Ar/36Ar ratios were measured to be 289-1811, slightly higher than those of atmospheric argon. The results of analysis of helium and argon isotopes suggested that ore-forming fluids were derived chiefly from the crust. The δ18O values of fluid inclusions from vein quartz range from -1.78‰ to 4.07‰, and the δD values of the fluid inclusions vary between -74‰ and -77‰. The hydrogen and oxygen isotope data indicated that the ore-forming fluid for the Longquanzhan gold deposit had mixed with meteoric water in the process of mineralization. This is consistent with the conclusion from the helium and argon isotope data.     

Geochemical Constraints on the Origin and Evolution of Spring Waters in the Changdu‐Lanping‐Simao Basin,Southwestern China

Chemical and isotopic data were measured for 51 leached brine springs in the Changdu-Lanping-Simao Basin (CD-LP-SM), China. The predominance of Cl and Na, saturation indices of carbonate minerals, and Na/Cl and Ca/SO4 ratios of ~1 suggest that halite, sulphate, and carbonate are the solute sources. Integration of geochemical, δ18O, and δD values suggests that springs are mainly derived from meteoric water, ice-snow melt, and water-rock interactions. B concentrations range from 0.18 to 11.9 mg/L, with δ11B values of ?4.37‰ to +32.39‰, indicating a terrestrial source. The δ11B-B relationships suggest B sources of crustal origin (marine carbonates with minor crust-derived volcanics); we did not identify a marine or deep mantle origin. The δ11B values of saline springs (+4.61‰ to +32.39‰) exceed those of hot (?4.37‰ to +4.53‰) and cold (?3.47‰ to +14.84‰) springs; this has contributed to strong water-rock interactions and strong saturation of dissolved carbonates. Conversely, the global geothermal δ11B-Cl/B relationship suggests mixing of marine and non-marine sources. The δ11B-Cl/B relationships of the CD-LP-SM are similar to those of the Tibet geothermal belt and the Nangqen Basin, indicating the same B origin. These differ from thermal waters controlled by magmatic fluids and seawater, suggesting that B in CD-LP-SM springs has a crustal origin.     

Geochemical Conditions of Metallization of the Lijiagou Pb-Zn Deposit, Gansu Province

The Lijiagou Pb-Zn deposit in Gansu Province is a syngenetic hydrothermal-depositonal and meta-morphosed hydrothermal weakly-reworked stratabound ore deposit. The metallogenic physicochemical condi-tions of the deposit are thoroughly dealt with in this paper according to its different mineralization stages.Based on the systematic study of metallogenic material sources, it is considered that the ore-forming metals, oresulphur and water of mineralizing fluids are mainly derived from the basement, reduction sulphur of marinesulfate and infiltrating heated meteoric water and partially recharged sea water, respectively. Finally, themetallogenic model of this deposit is established.     

Geological Characteristics and Genesis of the Jiamoshan MVT Pb–Zn Deposit in the Sanjiang belt, Tibetan Plateau

The carbonate-hosted Pb–Zn deposits in the Sanjiang metallogenic belt on the Tibetan Plateau are typical of MVT Pb–Zn deposits that form in thrust-fold belts. The Jiamoshan Pb–Zn deposit is located in the Changdu area in the middle part of the Sanjiang belt, and it represents a new style of MVT deposit that was controlled by karst structures in a thrust–fold system. Such a karst-controlled MVT Pb–Zn deposit in thrust settings has not previously been described in detail, and we therefore mapped the geology of the deposit and undertook a detailed study of its genesis. The karst structures that host the Jiamoshan deposit were formed in Triassic limestones along secondary reverse faults, and the orebodies have irregular tubular shapes. The main sulfide minerals are galena, sphalerite, and pyrite that occur in massive and lamellar form. The ore-forming fluids belonged to a Mg2+–Na+–K+–SO2-4–Cl-–F-–NO-3–H2 O system at low temperatures(120–130°C) but with high salinities(19–22% NaCl eq.). We have recognized basinal brine as the source of the ore-forming fluids on the basis of their H–O isotopic compositions(-145‰ to-93‰ for δDV-SMOW and-2.22‰ to 13.00‰ for δ18 Ofluid), the ratios of Cl/Br(14–1196) and Na/Br(16–586) in the hydrothermal fluids, and the C–O isotopic compositions of calcite(-5.0‰ to 3.7‰ for δ13 CV-PDB and 15.1‰ to 22.3‰ for δ18 OV-SMOW). These fluids may have been derived from evaporated seawater trapped in marine strata at depth or from Paleogene–Neogene basins on the surface. The δ34 S values are low in the galena(-3.2‰ to 0.6‰) but high in the barite(27.1‰), indicating that the reduced sulfur came from gypsum in the regional Cenozoic basins and from sulfates in trapped paleo-seawater by bacterial sulfate reduction. The Pb isotopic compositions of the galena samples(18.3270–18.3482 for 206 Pb/204 Pb, 15.6345–15.6390 for 207 Pb/204 Pb, and 38.5503–38.5582 for 208 Pb/204 Pb) are similar to those of the regional Triassic volcanic-arc rocks that formed during the closure of the Paleo-Tethys, indicating these arc rocks were the source of the metals in the deposit. Taking into account our new observations and data, as well as regional Pb–Zn metallogenic processes, we present here a new model for MVT deposits controlled by karst structures in thrust–fold systems.     

Origin of Halite in the Lanping–Simao Basin, Southeastern Tibetan Plateau, China: Evidence from Sr and Cl Isotopes

The Lanping?Simao Basin is located on the southeastern Tibetan Plateau, China, and contains massive evaporites. The origin of evaporites in the basin has been hotly debated because of the strong transformation by tectonic movement. Forty halite samples from borehole MK-3 in the Mengyejing area of the basin were collected and analyzed using XRD, Cl-Sr isotopes and chemical compositions to trace the origin of the evaporites in the basin. The Br × 103/Cl ratios of the halite samples are between 0 and 0.55, most of which are synchronized with the law of seawater evaporation and at the stage of halite precipitation from seawater, indicating that the evaporites are mainly of marine origin. The 87Sr/86Sr ratios range from 0.707489 to 0.711279; after correction, the 87Sr/86Sr 145 Ma ratios range from 0.704721 to 0.707611, equivalent with the 87Sr/86Sr ratios of seawater at 145 Ma, indicating a marine origin. The decay of 87Rb in the evaporite during deposition, change of the depositional environment and the unsealed environment at a later period resulted in the present 87Sr/86Sr ratios of some samples being high. The δ37Cl value compositions range from ?0.38‰ to 0.83‰, which is consistent with the δ37Cl value composition of the world marine halite (?0.6‰ to 0.4‰), further confirming that seawater is the main origin. In addition, the high δ37Cl value of some samples at the boundary of the upper and lower evaporite layers might be related to the influence of δ37Cl-rich brine and the incomplete dissolution of the halite.     

Ore—Fluid Systems of Fine Disseminated Gold Deposits Along the Southeastern Margin of the Yangtze Plate

Fine disseminated gold deposits occurring along the southeastern margin of the Yangtze Plate belong to the epithermal type resulting from different systems of ore-forming fluids.According to their sources, the ore-forming fluids can be divided into four systems: a)meteoric water system; b)oil-brine system; c)basin-brine system;and d)magmatic-formation water system.The four hydrothermal systems are responsible for four types of gold deposits, respectively.The meteoric water system produces hot spring gold deposits. The basin-brines,which are derived from fissure water, structural water and absorbed water sealed up in strata, are responsible for the absin-brine-type deposits.The oil-brine system, having the same source as the bain-brines ,is characterized by the involvement of organic matter and is responsible for the oil-brine-type deposits. Inclusion fluid data show that there are obvious differences in chemical composition and carbon, oxygen,hydrogen and sulfur isotopes for these hydrothermal systems.Different metallogenic provinces, in which one of the four systems is dominant, can be recognized in the region.     

Isotopic composition of dissolved boron and its geochemical behavior in a freshwater-seawater mixture at the estuary of the Changjiang （Yangtze） River

The isotopic composition of dissolved boron, in combination with the elemental concentrations of B, Cl and salinities in freshwater-seawater mixed samples taken from the estuary of the Changjiang River, the largest one in China, was investigated in detail in this study. Brackish water and seawater samples from the estuary of the Changjiang River were collected during low water season in November, 1998. Boron isotopic compositions were determined by the Cs2BO^＋2-graphite technique with a analytical uncertainty of 0.2‰ for NIST SRM 951 and an average analytical uncertainty of 0.8‰ for the samples. The isotopic compositions of boron, expressed in δ^11B, and boron concentrations in the Changjiang River at Nanjing and seawater from the open marine East Sea, China, are characterized by δ^11B values of -5.4‰ and 40.0‰, as well as 0.0272 and 4.43 mg B/L, respectively. Well-defined correlations between δ^11B values, B concentrations and Cl concentrations are interpreted in terms of binary mixing between fiver input water and East Sea seawater by a process of straightforward dilution. The offsets of δ^11B values are not related to the contents of clastic sediment and to the addition of boron. These relationships favor a conservative behavior of boron at the estuarine of the Changjiang River.     

http://www.sciencedirect.com/science/article/pii/S1674987111000806

Zoned tourmaline（schorl-dravite） in the matrix of hydrothermal explosive breccia and ore veins in gold deposits,Chita region.Eastern Transbaikalia.Russia,are associated with Na- and K-rich porphyry-type subvolcanic intrusives.δ¹⁸O values of tourmaline from three gold deposits（Darasun. Talatui,Teremkinskoye） are +8.3‰,+7.6‰,and +6.0‰and calculatedδ¹⁸O values of fluids responsible for the tourmalinization are +7.3‰,+7.7‰,and +4.2‰,respectively.These data imply an igneous fluid source,except at the Teremkin deposit where mixing with meteoric water is indicated.Wide ranges of Fe³⁺/Fe_tot,and the presence of vacancies characterize the Darasun deposit tourmaline indicating wide ranges of f（O₂） and pH of mineralizing fluids.Initial stage tourmalines from the gold deposits of the Darasun ore district are dravite or high mg schorl.Second stage tourmaline is characterized by oscillatory zoning but with Fe generally increasing towards crystal rims indicating decreasing temperature.Third stage tourmaline formed unzoned crystals with x_Mg（mole fraction of Mg） close to that of the hrst stage tourmaline,due to a close association with pyrite and arsenopyrite.From Fe³⁺/Fe_tot values,chemical composition and crystallization temperatures.logf（O₂） of mineralizing fluids ranged from ca.—25 to—20. much higher than for the gold-bearing beresite—listvenite association,indicating that tourmalinization was not related to gold mineralization.     

Salt Waters of the Northern Apennine Foredeep Basin (Italy): Origin and Evolution

The salt waters from the Emilia-Romagna sector of the Northern Apennine Foredeep have been investigated using major and trace element and stable isotope (δ²H, δ¹⁸O, δ³⁷Cl, δ⁸¹Br and ⁸⁷Sr/⁸⁶Sr ratio). Ca, Mg, Na, K, Sr, Li, B, I, Br and SO₄ vs. Cl diagrams suggest the subaerial evaporation of seawater beyond gypsum and before halite precipitation as primary process to explain the brine’s salinity, whereas saline to brackish waters were formed by mixing of evaporated seawater and water of meteoric origin. A diagenetic end-member may be a third component for mud volcanoes and some brackish waters. Salinization by dissolution of (Triassic) evaporites has been detected only in samples from the Tuscan side of the Apennines and/or interacting with the Tuscan Nappe. In comparison with the seawater evaporation path, Ca–Sr enrichment and Na–K–Mg depletion of the foredeep waters reveal the presence of secondary processes such as dolomitization–chloritization, zeolitization–albitization and illitization. Sulfate concentration, formerly buffered by gypsum-anhydrite deposition, is heavily lowered by bacterial and locally by thermochemical reduction during burial diagenesis. From an isotopic point of view, data of the water molecule confirm mixing between seawater and meteoric end-members. Local ¹⁸O-shift up to +11‰ at Salsomaggiore is related to water–rock interaction at high temperature (≈150°C) as confirmed by chemical (Mg, Li, Ca distribution) and isotopic (SO₄–H₂O) geothermometers. ³⁷Cl/³⁵Cl and ⁸¹Br/⁷⁹Br ratios corroborate the marine origin of the brines and evidence the diffusion of halogens from the deepest and most saline aquifers toward the surface. The ⁸⁷Sr/⁸⁶Sr ratio suggests a Miocene origin of Sr and rule out the hypothesis of a Triassic provenance of the dissolved components for the analyzed waters issuing from the Emilia-Romagna sector of the foredeep. Waters issuing from the Tuscan side of the Apennines and from the Marche sector of the foredeep show higher ⁸⁷Sr/⁸⁶Sr ratios because of the interaction with siliciclastic rocks.     

Cl/Br ratios and stable chlorine isotope analysis of magmatic–hydrothermal fluid inclusions from Butte,Montana and Bingham Canyon,Utah

A bulk geochemical study has been carried out on fluid inclusion leachates extracted from quartz veins from porphyry Cu deposits in Butte, Montana, USA and Bingham Canyon, Utah, USA. The leachates mostly represent low-salinity magmatic–hydrothermal fluid inclusions. Their halogen ratios (Br/Cl) of fluid inclusion leachates were determined by ion chromatography, and δ³⁷Cl values of the leachates were measured by continuous-flow isotope ratio mass spectrometry. Br/Cl ratios from early pre-Main stage and later Main stage veins at Butte range from 0.60 to 1.88 × 10⁻³ M. Ratios are similar in pre-Main stage veins with sericite bearing selvages and Main stage samples ranging from 0.81 to 1.08 × 10⁻³ and from 0.92 to 1.88 × 10⁻³ M, respectively, clustering below seawater (1.54 × 10⁻³ M) and overlapping mantle values (~1–2 × 10⁻³ M). Two samples associated with early pre-Main stage potassic alteration yield distinctly lower Br/Cl ratios of 0.60 and 0.64 × 10⁻³ M. Butte δ³⁷Cl values range from −0.8‰ to −2.3‰ with no significant difference between pre-Main stage and Main stage samples. Br/Cl ratios for quartz veins from Bingham Canyon range from 0.18 to 3.68 × 10⁻³ M. Br/Cl ratios from Bingham range above and below previously reported for porphyry copper deposits. In contrast to Butte, δ³⁷Cl values for Bingham are lower, ranging from −0.9‰ to −4.1‰. In the absence of any processes which can significantly fractionate chlorine isotopes at high temperatures, we suggest that the porphyry system at Bingham, and to a lesser extent at Butte, have inherited negative chlorine isotopic signatures from the subducting slab generated at low temperatures.     

Origin of the Zálesí U–Ni–Co–As–Ag/Bi deposit,Bohemian Massif,Czech Republic: fluid inclusion and stable isotope constraints

The Zálesí vein-type deposit is hosted by Early Paleozoic high-grade metamorphic rocks on the northern margin of the Bohemian Massif. The mineralization is composed of three main stages: uraninite, arsenide, and sulfide. The mineral assemblages formed at low temperatures (~80 to 130°C, locally even lower) and low pressures (<100 bars). The salinity of the aqueous hydrothermal fluids (0 to 27 wt.% salts) and their chemical composition vary significantly. Early fluids of the oldest uraninite stage contain a small admixture of a clathrate-forming gas, possibly CO₂. Salinity correlates with oxygen isotope signature of the fluid and suggests mixing of brines [δ ¹⁸O around +2‰ relative to standard mean ocean water (SMOW)] with meteoric waters (δ ¹⁸O around −4‰ SMOW). The fluid is characterized by highly variable halogen ratios (molar Br/Cl = 0.8 × 10⁻³ to 5.3 × 10⁻³; molar I/Cl = 5.7 × 10⁻⁶ to 891 × 10⁻⁶) indicating a dominantly external origin for the brines, i.e., from evaporated seawater, which mixed with iodine-enriched halite dissolution brine. The cationic composition of these fluids indicates extensive interaction of the initial brines with their country rocks, likely associated with leaching of sulfur, carbon, and metals. The brines possibly originated from Permian–Triassic evaporites in the neighboring Polish Basin, infiltrated into the basement during post-Variscan extension and were finally expelled along faults giving rise to the vein-type mineralization. Cenozoic reactivation by low-salinity, low-δ ¹⁸O (around −10‰ SMOW) fluids of mainly meteoric origin resulted in partial replacement of primary uraninite by coffinite-like mineral aggregates.     

Salinization properties of a shallow groundwater in a coastal reclaimed area,Yeonggwang, Korea

The need for more agricultural or residential land has encouraged reclamation at the coastal areas of Korea since 1200 ad (approximately). The groundwaters of these reclaimed areas could be expected to reveal hydrogeochemical properties different from those of areas directly affected by seawater intrusion. The purpose of this study, therefore, was to examine the salinization of shallow groundwater in a coastal reclaimed area and to identify the effect of land reclamation on groundwater quality. Major cations and anions, iodide, total organic carbon, δD, δ ¹⁸O and δ ¹³C were measured to assist the hydrogeochemical analysis. Chloride, δD and δ ¹⁸O data clearly show that the Na–Cl type water results from mixing of groundwater with seawater. In particular, the δD and δ ¹⁸O of Ca+Mg–Cl+NO₃ type groundwaters are close to the meteoric water line, but Na–Cl type waters enriched in chloride are ¹⁸O-enriched with respect to the meteoric water line. Meanwhile, carbon isotopic data and I/Cl ratios strongly suggest that there are various sources of salinity. The δ ¹³C values of Na–Cl type groundwaters are generally similar to those of Ca+Mg–Cl+NO₃ type waters, which are depleted in ¹³C with respect to seawater. I/Cl ratios of Na–Cl type groundwater are 10–100 times higher than that of seawater. Because the reclamation has incorporated a large amount of organic matter, it provides optimum conditions for the occurrence of redox processes in the groundwater system. Therefore, the salinization of groundwater in the study area seems to be controlled not only by saltwater intrusion but also by other effects, such as those caused by residual salts and organic matter in the reclaimed sediments.     

Imprint of meteoric water on the stable isotope compositions of igneous and secondary minerals,Kap Edvard Holm Complex,East Greenland

 Hydrogen and oxygen isotope analyses have been made of hydrous minerals in gabbros and basaltic xenoliths from the Eocene Kap Edvard Holm intrusive complex of East Greenland. The analyzed samples are of three types: (1) primary igneous hornblendes and phlogopites that crystallized from partial melts of hydrothermally altered basaltic xenoliths, (2) primary igneous hornblendes that formed during late–magmatic recrystallization of layered gabbroic cumulates, and (3) secondary actinolite, epidote and chlorite that formed during subsolidus alteration of both xenoliths and gabbros. Secondary actinolite has a δ¹⁸O value of −5.8‰ and a δD value of −158‰. These low values reflect subsolidus alteration by low–δ¹⁸O, low–δD hydrothermal fluids of meteoric origin. The δD value is lower than the −146 to −112‰ values previously reported for amphiboles from other early Tertiary meteoric–hydrothermal systems in East Greenland and Scotland, indicating that the meteoric waters at Kap Edvard Holm were isotopically lighter than typical early Tertiary meteoric waters in the North Atlantic region. This probably reflects local climatic variations caused by formation of a major topographic dome at about the time of plutonism and hydrothermal activity. The calculated isotopic composition of the meteoric water is δD=−110 ± 10‰, δ¹⁸O ≈−15‰. Igneous hornblendes and phlogopites from pegmatitic pods in hornfelsed basaltic xenoliths have δ¹⁸O values between −6.0 and −3.8‰ and δD values between −155 and −140‰. These are both much lower than typical values of fresh basalts. The oxygen isotope fractionations between pegmatitic hornblendes and surrounding hornfelsic minerals are close to equilibrium fractionations for magmatic temperatures, indicating that the pegmatites crystallized from low–δ¹⁸O partial melts of xenoliths that had been hydrothermally altered and depleted in ¹⁸O prior to stoping. The pegmatitic minerals may have crystallized with low primary δD values inherited from the altered country rocks, but these values were probably overprinted extensively by subsolidus isotopic exchange with low–δD meteoric–hydrothermal fluids. This exchange was facilitated by rapid self–diffusion of hydrogen through the crystal structures. Primary igneous hornblendes from the plutonic rocks have δ¹⁸O values between +2.0 and +3.2‰ and δD values between −166 and −146‰. The ¹⁸O fractionations between hornblendes and coexisting augites are close to equilibrium fractionations for magmatic temperatures, indicating that the hornblendes crystallized directly from the magma and subsequently underwent little or no oxygen exchange. The hornblendes may have crystallized with low primary δD values, due to contamination of the magma with altered xenolithic material, but the final δD values were probably controlled largely by subsolidus isotopic exchange. This inference is based partly on the observation that coexisting plagioclase has been extensively depleted in ¹⁸O via a mineral–fluid exchange reaction that is much slower than the hydrogen exchange reaction in hornblende. It is concluded that all hydrous minerals in the study area, whether igneous or secondary, have δD values that reflect extensive subsolidus isotopic equilibration with meteoric–hydrothermal fluids. Received: 22 March 1994 / Accepted: 26 January 1995     

Contrasting stable isotope behavior between calcite and dolomite marbles,Lone Mountain,Nevada

 Late Proterozoic to Cambrian carbonate rocks from Lone Mountain, west central Nevada, record multiple post-depositional events including: (1) diagenesis, (2) Mesozoic regional metamorphism, (3) Late Cretaceous contact metamorphism, related to the emplacement of the Lone Mountain granitic pluton and (4) Tertiary hydrothermal alteration associated with extension, uplift and intrusion of silicic porphyry and lamprophyre dikes. Essentially pure calcite and dolomite marbles have stable isotopic compositions that can be divided into two groups, one with positive δ¹³C values from+3.1 to +1.4 ‰ (PDB) and high δ¹⁸O values from +21.5 to +15.8 ‰ (SMOW), and the other with negative δ¹³C values from –3.3 to –3.6‰ and low δ¹⁸O values from +16.9 to +11.1‰. Marbles also contain minor amounts of quartz, muscovite and phlogopite. Brown and blue luminescent, clear, smooth textured quartz grains from orange luminescent calcite marbles have high δ¹⁸O values from +23.9 to +18.1‰, while brown luminescent, opaque, rough textured quartz grains from red luminescent dolomite marbles typically have low δ¹⁸O values from +2.0 to +9.3‰. The δ¹⁸O values of muscovite and phlogopite from marbles are typical of micas in metamorphic rocks, with values between +10.4 and +14.4‰, whereas mica δD values are very depleted, varying from −102 to −156‰. No significant lowering of the δ¹⁸O values of Lone Mountain carbonates is inferred to have occurred during metamorphism as a result of devolatilization reactions because of the essentially pure nature of the marbles. Bright luminescence along the edges of fractures, quartz cements and quartz overgrowths in dolomite marbles, low δD values of micas, negative δ¹³C values and low δ¹⁸O values of calcite and dolomite, and depleted δ¹⁸O values of quartz from dolomite marbles all indicate that meteoric fluids interacted with Lone Mountain marbles during the Tertiary. Partial oxygen isotopic exchange between calcite and low ¹⁸O meteoric fluids lowered the δ¹⁸O values of calcite, resulting in uniform quartz-calcite fractionations that define an apparent pseudoisotherm. These quartz-calcite fractionations significantly underestimate both the temperature of metamorphism and the temperature of post-metamorphic alteration. Partial oxygen isotopic exchange between quartz and meteoric fluids also resulted in ¹⁸O depletion of quartz from dolomite marbles. This partial exchange was facilitated by an increase in the surface area of the quartz as a result of its dissolution by meteoric fluids. The negative δ¹³C values in carbonates result from the oxidation of organic material by meteoric fluids following metamorphism. Stable isotopic data from Lone Mountain marbles are consistent with the extensive circulation of meteoric hydrothermal fluids throughout western Nevada in Tertiary time. Received: 1 February 1994/Accepted: 12 September 1995     

An evaporated seawater origin for the ore-forming brines in unconformity-related uranium deposits (Athabasca Basin, Canada): Cl/Br and δCl analysis of fluid inclusions

Analyses of halogen concentration and stable chlorine isotope composition of fluid inclusions from hydrothermal quartz and carbonate veins spatially and temporally associated with giant unconformity-related uranium deposits from the Paleoproterozoic Athabasca Basin (Canada) were performed in order to determine the origin of chloride in the ore-forming brines. Microthermometric analyses show that samples contain variable amounts of a NaCl-rich brine (Cl concentration between 120,000 and 180,000 ppm) and a CaCl₂-rich brine (Cl concentration between 160,000 and 220,000 ppm). Molar Cl/Br ratios of fluid inclusion leachates range from ∼100 to ∼900, with most values between 150 and 350. Cl/Br ratios below 650 (seawater value) indicate that the high salinities were acquired by evaporation of seawater. Most δ³⁷Cl values are between −0.6‰ and 0‰ (seawater value) which is also compatible with a common evaporated seawater origin for both NaCl- and CaCl₂-rich brines.Slight discrepancies between the Cl concentration, Cl/Br, δ³⁷Cl data and seawater evaporation trends, indicate that the evaporated seawater underwent secondary minor modification of its composition by: (i) mixing with a minor amount of halite-dissolution brine or re-equilibration with halite during burial; (ii) dilution in a maximum of 30% of connate and/or formation waters during its migration towards the base of the Athabasca sandstones; (iii) leaching of chloride from biotites within basement rocks and (iv) water loss by hydration reactions in alteration haloes linked to uranium deposition.The chloride in uranium ore-forming brines of the Athabasca Basin has an unambiguous dominantly marine origin and has required large-scale seawater evaporation and evaporite deposition. Although the direct evidence for evaporative environments in the Athabasca Basin are lacking due to the erosion of ∼80% of the sedimentary pile, Cl/Br ratios and δ³⁷Cl values of brines have behaved conservatively at the basin scale and throughout basin history.     

National scale evaluation of groundwater chemistry in Korea coastal aquifers: evidences of seawater intrusion

Pollution of groundwater by seawater intrusion poses a threat to sustainable agriculture in the coastal areas of Korea. Therefore, seawater intrusion monitoring stations were installed in eastern, western, and southern coastal areas and have been operated since 1998. In this study, groundwater chemistry data obtained from the seawater intrusion monitoring stations during the period from 2007 to 2009 were analyzed and evaluated. Groundwater was classified into fresh (<1,500 μS/cm), brackish (1,500–3,000 μS/cm), and saline (>3,000 μS/cm) according to EC levels. Among groundwater samples (n = 233), 56, 7, and 37% were classified as the fresh, brackish, and saline, respectively. The major dissolved components of the brackish and saline groundwaters were enriched compared with those of the fresh groundwater. The enrichment of Na⁺ and Cl⁻ was especially noticeable due to seawater intrusion. Thus, the brackish and saline groundwaters were classified as Ca–Cl and Na–Cl types, while the fresh groundwater was classified as Na–HCO₃ and Ca–HCO₃ types. The groundwater included in the Na–Cl types indicated the effects of seawater mixing. Ca²⁺, Mg²⁺, Na⁺, K⁺, SO₄ ²⁻, and Br⁻ showed good correlations with Cl⁻ of over r = 0.624. Of these components, the strong correlations of Mg²⁺, SO₄ ²⁻, and Br⁻ with Cl⁻ (r ≥ 0.823) indicated a distinct mixing between fresh groundwater and seawater. The Ca/Cl and HCO₃/Cl ratios of the groundwaters gradually decreased and approached those of seawater. The Mg/Cl, Na/Cl, K/Cl, SO₄/Cl, and Br/Cl ratios of the groundwaters gradually decreased, and were similar to or lower than those of seawater, indicating that Mg²⁺, Na⁺, K⁺, SO₄ ²⁻, and Br⁻, as well as Cl⁻ in the saline groundwater can be enriched by seawater mixing, while Ca²⁺ and HCO₃ ⁻ are mainly released by weathering processes. The influence of seawater intrusion was evaluated using threshold values of Cl⁻ and Br⁻, which were estimated as 80.5 and 0.54 mg/L, respectively. According to these criteria, 41–50% of the groundwaters were affected by seawater mixing.     

300 Million years of episodic hydrothermal activity: stable isotope evidence from hydrothermal rocks of the Eastern Iberian Central System

The Eastern Iberian Central System has abundant ore showings hosted by a wide variety of hydrothermal rocks; they include Sn-W, Fe and Zn-(W) calcic and magnesian skarns, shear zone- and episyenite-hosted Cu-Zn-Sn-W orebodies, Cu-W-Sn greisens and W-(Sn), base metal and fluorite-barite veins. Systematic dating and fluid inclusion studies show that they can be grouped into several hydrothermal episodes related with the waning Variscan orogeny. The first event was at about 295 Ma followed by younger pulses associated with Early Alpine rifting and extension and dated near 277, 150 and 100 to 20 Ma, respectively (events II–IV). The δ¹⁸O-δD and δ³⁴S studies of hydrothermal rocks have elucidated the hydrological evolution of these systems. The event I fluids are of mixed origin. They are metamorphic fluids (H₂O-CO₂-CH₄-NaCl; δ¹⁸O=4.7 to 9.3‰; δD ab.−34‰) related to W-(Sn) veins and modified meteoric waters in the deep magnesian Sn-W skarns (H₂O-NaCl, 4.5–6.4 wt% NaCl eq.; δ¹⁸O=7.3–7.8‰; δD=−77 to −74‰) and epizonal shallow calcic Zn-(W) and Fe skarns (H₂O-NaCl, <8 wt% NaCl eq.; δ¹⁸O=−0.4 to 3.4‰; δD=−75 to −58‰). They were probably formed by local hydrothermal cells that were spatially and temporally related to the youngest Variscan granites, the metals precipitating by fluid unmixing and fluid-rock reactions. The minor influence of magmatic fluids confirms that the intrusion of these granites was essentially water-undersaturated, as most of the hydrothermal fluids were external to the igneous rocks. The fluids involved in the younger hydrothermal systems (events II–III) are very similar. The waters involved in the formation of episyenites, chlorite-rich greisens, retrograde skarns and phyllic and chlorite-rich alterations in the shear zones show no major chemical or isotopic differences. Interaction of the hydrothermal fluids with the host rocks was the main mechanism of ore formation. The composition (H₂O-NaCl fluids with original salinities below 6.2 wt% NaCl eq.) and the δ¹⁸O (−4.6 to 6.3‰) and δD (−51 to −40‰) values are consistent with a meteoric origin, with a δ¹⁸O-shift caused by the interaction with the, mostly igneous, host rocks. These fluids circulated within regional-scale convective cells and were then channelled along major crustal discontinuities. In these shear zones the more easily altered minerals such as feldspars, actinolite and chlorite had their δ¹⁸O signatures overprinted by low temperature younger events while the quartz inherited the original signature. In the shallower portions of the hydrothermal systems, basement-cover fluorite-barite-base metal veins formed by mixing of these deep fluids with downwards percolating brines. These brines are also interpreted as of meteoric origin (δ¹⁸O< ≈ −4‰; δD=−65 to −36‰) that leached the solutes (salinity >14 wt% NaCl eq.) from evaporites hosted in the post-Variscan sequence. The δD values are very similar to most of those recorded by Kelly and Rye in Panasqueira and confirm that the Upper Paleozoic meteoric waters in central Iberia had very negative δD values (≤−52‰) whereas those of Early Mesozoic age ranged between −65 and −36‰. Received: 9 June 1999 / Accepted: 19 January 2000