Regional stratigraphy and distribution of epigenetic stratabound celestine, fluorite, barite and Pb–Zn deposits in the MVT province of northeastern Mexico

Northeastern Mexico hosts numerous epigenetic stratabound carbonate-hosted low-temperature hydrothermal deposits of celestine, fluorite, barite and zinc-lead, which formed by replacement of Mesozoic evaporites or carbonate rocks. Such deposits can be permissively catalogued as Mississippi Valley-type (MVT) deposits. The deposits studied in the state of Coahuila are associated with granitic and metasedimentary basement highs (horsts) marginal or central to the Mesozoic Sabinas Basin. These horsts controlled the stratigraphy of the Mesozoic basins and subsequently influenced the Laramide structural pattern. The Sabinas Basin consists of ~6,000-m-thick Jurassic to Cretaceous siliciclastic, carbonate and evaporitic series. The MVT deposits are mostly in Barremian and in Aptian-Albian to Cenomanian formations and likely formed from basinal brines that were mobilized during the Laramide orogeny, although earlier diagenetic replacement of evaporite layers (barite and celestine deposits) and lining of paleokarstic cavities in reef carbonates (Zn–Pb deposits) is observed. Fluid inclusion microthermometry and isotopic studies suggest ore formation due to mixing of basinal brines and meteoric water. Homogenization temperatures of fluid inclusions range from 45°C to 210°C; salinities range from 0 to 26 wt.% NaCl equiv., and some inclusions contain hydrocarbons or bitumen. Sulfur isotope data suggest that most of the sulfur in barite and celestine is derived from Barremian to Cenomanian evaporites. Regional geology and a compilation of metallogenic features define the new MVT province of northeastern Mexico, which comprises most of the state of Coahuila and portions of the neighboring states of Nuevo León, Durango and, perhaps extends into Zacatecas and southern Texas. This province exhibits a regional metal zonation, with celestine deposits to the south, fluorite deposits to the north and barite and Zn–Pb deposits mostly in the central part.     

黔东北大竹园萤石矿床Sm-Nd等时线年龄及其地质意义

黔东北(沿河)-渝东南(酉阳)一带广泛发育萤石、重晶石及铅锌(汞)矿化,关于其成矿时代,一直缺少直接的同位素年龄证据。黔东北大竹园萤石矿床位于上扬子地块东南缘,矿体赋存于下奥陶统桐梓组和红花园组碳酸盐岩内,受NW向断裂控制,是本区热液脉型萤石矿床的代表。本文以该矿床为研究对象,利用单矿物Sm-Nd等时线方法进行了成矿年龄测定,获得萤石Sm-Nd等时线年龄为436±15 Ma(MSWD=0. 85),萤石与共生方解石Sm-Nd等时线年龄为430±13 Ma(MSWD=1. 02),两者在误差范围内一致,表明矿床形成于加里东期,该年龄与湘西-黔东MVT铅锌矿床成矿时代(477～410 Ma)一致。本区萤石-重晶石矿床与区内产出的主要铅锌(汞)矿床关系密切,推测它们有相近的物质来源,是在同一构造运动时期形成的一个有亲缘关系的成矿系列。研究结果指示加里东期是区内重要的萤石-重晶石-铅锌(汞)中低温热液成矿期。     

Molybdenite Re–Os and albite Ar/Ar dating of Cu–Au–Mo and magnetite porphyry systems in the Yangtze River valley and metallogenic implications

The area of the Middle–Lower Yangtze River valley, Eastern China, extending from Wuhan (Hubei province) to western Zhenjiang (Jiangsu province), hosts an important belt of Cu–Au–Mo and Fe deposits. There are two styles of mineralization, i.e., skarn/porphyry/stratabound Cu–Au–Mo–(Fe) deposits and magnetite porphyry deposits in several NNE-trending Cretaceous fault-bound volcanic basins. The origin of both deposit systems is much debated. We dated 11 molybdenite samples from five skarn/porphyry Cu–Au–Mo deposits and 5 molybdenite samples from the Datuanshan stratabound Cu–Au–Mo deposit by ICP-MS Re–Os isotope analysis. Nine samples from the same set were additionally analyzed by NTIMS on Re–Os. Results from the two methods are almost identical. The Re–Os model ages of 16 molybdenite samples range from 134.7 ± 2.3 to 143.7 ± 1.6 Ma (2σ). The model ages of the five samples from the Datuanshan stratabound deposit vary from 138.0 ± 3.2 to 140.8 ± 2.0 Ma, with a mean of 139.3 ± 2.6 Ma; their isochron age is 139.1 ± 2.7 Ma with an initial Os ratio of 0.7 ± 8.1 (MSWD = 0.29). These data indicate that the porphyry/skarn systems and the stratabound deposits have the same age and suggest an origin within the same metallogenic system. Albite ⁴⁰Ar/³⁹Ar dating of the magnetite porphyry deposits indicates that they formed at 123 to 125 Ma, i.e., 10–20 Ma later. Both mineralization styles characterize transitional geodynamic regimes, i.e., the period around 140 Ma when the main NS-trending compressional regime changed to an EW-trending lithospheric extensional regime, and the period of 125–115 Ma of dramatic EW-trending lithospheric extension.     

Mineral assemblages of the Francisco I. Madero Zn–Cu–Pb–(Ag) deposit, Zacatecas, Mexico: Implications for ore deposit genesis

The Francisco I. Madero deposit, central Mexico, occurs in the Mesozoic Guerrero Terrane, which hosts many ore deposits, both Cretaceous (volcanogenic massive sulfides) and Tertiary (epithermal and skarn deposits). It is hosted by a 600 m-thick calcareous-pelitic unit, of Lower Cretaceous age, crosscut by porphyritic dikes that strike NW–SE. A thick felsic volcanic Tertiary sequence, consisting of andesites and rhyolitic ignimbrites, unconformably overlies the Cretaceous series. At the base, the mineralization consists of several mantos developed within calcareous beds. They are dominantly composed of sphalerite, pyrrhotite and pyrite with minor chalcopyrite, arsenopyrite and galena. At the top of the orebody, there are calcic skarns formed through prograde and retrograde stages. The resulting mineral assemblages are rich in manganoan hedenbergite (Hd_75–28Di_40–4Jh_40–20), andraditic garnets (Adr_100–62Grs_38–0), epidote (Ep_95–36Czo_60–5Pie_8–0), chamosite, calcite and quartz. The temperature of ore deposition, estimated by chlorite and arsenopyrite geothermometry, ranges from 243° to 277 °C and from 300° to 340 °C, respectively. The pressure estimated from sphalerite geobarometry averages 2.1 kbar. This value corresponds to a moderately deep skarn and agrees with the high Cu content of the deposit. Paragenesis, P–T conditions and geological characteristics are compatible with a distal, dike-related, Zn skarn deposit. Its style of mineralization is similar to that of many high-temperature carbonate replacement skarn deposits in the Southern Cordillera.     

(U–Th)/He dating of fluorite: application to the La Azul fluorspar deposit in the Taxco mining district, Mexico

The (U–Th)/He dating method was applied to fluorite of the La Azul fluorspar deposit, Taxco mining district, Mexico. Ages of ten U-rich (4–94 g/g) samples range from 30 to 33 Ma (mean 32±2 Ma, 1). This age range is interpreted as the time of primary fluorite precipitation and is close to the K/Ar age of sericite from a small fluorspar deposit (Los Tréboles) in the same area, and the K/Ar age of the nearby volcanic succession, which is thought to be the main source of fluorine in both deposits. This age is also in concordance with the very few published ages of epithermal deposits in southern Mexico. The dating of fluorite by other methods, particularly for young samples, is a difficult task. We believe that the (U–Th)/He method, which has been applied before to thermochronological studies of apatite, zircon, titanite and hematite, can be used as a tool for direct dating of fluorite with microgram per gram levels of uranium and thorium.Editorial handling: B. Lehmann     

Geochemical modelling of a Zn–Pb skarn: Constraints from LA–ICP–MS analysis of fluid inclusions

The Bismark deposit (northern Chihuahua, Mexico) is one of several base metal-rich high-temperature, carbonate-replacement deposits hosted in northern Mexico. Previous fluid inclusion studies based on microthermometry and PIXE have shown that the Zn-rich, Pb-poor Bismark deposit formed from a moderate salinity magmatic fluid [Baker, T. and Lang, J.R., 2003. Reconciling fluid inclusion types, fluid processes, and fluid sources in skarns: an example from the Bismark Deposit, Mexico. Mineralium Deposita 38(4), 474–495; Baker, T., van Achterberg, E., Ryan, C.G. and Lang, J.R., 2004. Composition and evolution of ore fluids in a magmatic-hydrothermal skarn deposit. Geology 32(2), 117–120]. The exact precipitation mechanisms are unclear and may have due to cooling, salinity decrease and wall rock reaction. Furthermore, PIXE data suggested that Pb and Zn concentrations were comparable and inconsistent with the Zn-rich nature of the ore. However, Pb was commonly below the limit of detection for PIXE and the data presented by Baker et al. [Baker, T., van Achterberg, E., Ryan, C.G. and Lang, J.R., 2004. Composition and evolution of ore fluids in a magmatic-hydrothermal skarn deposit. Geology 32(2), 117–120] are regarded as the maximum concentrations of Pb in the fluid. In this study new LA ICP MS analysis was carried out on the same fluid inclusion population to compare with the PIXE data in order to constrain the uncertainty related to the Pb data and the new results are used to model possible ore deposition mechanisms. The new laser ablation data reveal overall lower concentrations of Pb in the ore fluid (average value ~ 285 ppm) than previously indicated by PIXE analysis (average value ~ 713 ppm). Chemical modelling using the new laser ablation data tested the following ore deposition processes: 1) cooling; 2) fluid–rock reaction at constant temperature; 3) cooling and simultaneous fluid–rock interaction. Modelling results show that the gangue and ore minerals observed at Bismark are best reproduced by fluid–rock interaction and simultaneous cooling. Results from the simulations strongly indicate that ore deposition was mainly driven by a pH increase due to the neutralization of the acidic ore fluid (pH = 3.9) as the result of the reaction with the limestone. Modelling results also suggest that the deposit likely formed under cooling conditions, but do not support the hypothesis of a temperature decrease as the principal ore-forming process.     

Nature, diversity of deposit types and metallogenic relations of South China

The South China Region is rich in mineral resources and has a wide diversity of deposit types. The region has undergone multiple tectonic and magmatic events and related metallogenic processes throughout the earth history. These tectonic and metallogenic processes were responsible for the formation of the diverse styles of base and precious metal deposits in South China making it one of the resource-rich regions in the world. During the Proterozoic, the South China Craton was characterised by rifting of continental margin before eruption of submarine volcanics and development of platform carbonate rocks, and the formation of VHMS, stratabound copper and MVT deposits. The Phanerozoic metallogeny of South China was related to opening and closing of the Tethyan Ocean involving multiple orogenies by subduction, back-arc rifting, arc–continent collision and post-collisional extension during the Indosinian (Triassic), Yanshanian (Jurassic to Cretaceous) and Himalayan (Tertiary) Orogenies. The Late Palaeozoic was a productive metallogenic period for South China resulting from break-up and rifting of Gondwana. Significant stratabound base and precious metal deposits were formed during the Devonian and Carboniferous (e.g., Fankou and Dabaoshan deposits). These Late Palaeozoic SEDEX-style deposits have been often overprinted by skarn systems associated with Yanshanian magmatism (e.g., Chengmenshan, Dongguashan and Qixiashan). A number of Late Palaeozoic to Early Mesozoic VHMS deposits also developed in the Sanjiang fold belt in the western part of South China (e.g., Laochang and Gacun).South China has significant sedimentary rock-hosted Carlin-like deposits, which occur in the Devonian- to Triassic-aged accretionary wedge or rift basins at the margin of the South China Craton. They are present in a region at the junction of Yunnan, Guizhou, and Guangxi Provinces called the ‘Southern Golden Triangle’, and are also present in NW Sichuan, Gansu and Shaanxi, in an area known as the ‘Northern Golden Triangle’ of China. These deposits are mostly epigenetic hydrothermal micron-disseminated gold deposits with associated As, Hg, Sb + Tl mineralisation similar to Carlin-type deposits in USA. The important deposits in the Southern Golden Triangle are Jinfeng (Lannigou), Zimudang, Getang, Yata and Banqi in Guizhou Province, and the Jinya and Gaolong deposits in Guangxi District. The most important deposits in the Northern Golden Triangle are the Dongbeizhai and Qiaoqiaoshang deposits.Many porphyry-related polymetallic copper–lead–zinc and gold skarn deposits occur in South China. These deposits are related to Indosinian (Triassic) and Yanshanian (Jurassic to Cretaceous) magmatism associated with collision of the South China and North China Cratons and westward subduction of the Palaeo-Pacific Plate. Most of these deposits are distributed along the Lower to Middle Yangtze River metallogenic belt. The most significant deposits are Tonglushan, Jilongshan, Fengshandong, Shitouzui and Jiguanzui. Au–(Ag–Mo)-rich porphyry-related Cu–Fe skarn deposits are also present (Chengmenshan and Wushan in Jiangxi Province and Xinqiao, Mashan-Tianmashan, Shizishan and Huangshilaoshan in Anhui Province). The South China fold belt extending from Fujian to Zhejiang Provinces is characterised by well-developed Yanshanian intrusive to subvolcanic rocks associated with porphyry to epithermal type mineralisation and mesothermal vein deposits. The largest porphyry copper deposit in China, Dexing, occurs in Jiangxi Province and is hosted by Yanshanian granodiorite. The high-sulphidation epithermal system occurs at the Zijinshan district in Fujian Province and epithermal to mesothermal vein-type deposits are also found in the Zhejiang Province (e.g., Zhilingtou). Part of Shandong Province is located at the northern margin of the South China Craton and the province has unique world class granite-hosted orogenic gold deposits. Occurrences of Pt–Pd–Ni–Cu–Co are found in Permian-aged Emeishan continental flood basalt (ECFB) in South China (Jinbaoshan and Baimazhai in Yunnan Province and Yangliuping in Sichuan Province). South China also has major vein-type tungsten–tin–bismuth–beryllium–sulphide and REE deposits associated with Yanshanian magmatism (e.g., Shizhuyuan and Xihuashan), important world class stratabound base metal–tin deposits (Dachang deposit), and the large antimony deposits (Xikuangshan and Woxi). During the Himalayan Orogeny, many giant deposits were formed in South China including the recently emerging Yulong and Gangdese porphyry copper belts in Tibet and the Ailaoshan orogenic gold deposits in Yunnan.     

福建松溪井窠萤石矿床地质特征及成因探讨

松溪井窠萤石矿属低温热液充填型脉状小型萤石矿床。通过对该矿成矿地质条件、矿化特征及成矿远景等研究分析,提出萤石矿的找矿方向。     

Stratigraphy and base metal mineralization in the Otavi Mountain Land, Northern Namibia—a review and regional interpretation

Sediment-hosted base metal sulfide deposits in the Otavi Mountain Land occur in most stratigraphic units of the Neoproterozoic Damara Supergroup, including the basal Nosib Group, the middle Otavi Group and the uppermost Mulden Group. Deposits like Tsumeb (Pb–Cu–Zn–Ge), Kombat (Cu–Pb–Zn), Berg Aukas (Zn–Pb–V), Abenab West (Pb–Zn–V) all occur in Otavi Group dolostones, whereas siliciclastic and metavolcanic rocks host Cu–(Ag) or Cu–(Au) mineralization, respectively. The Tsumeb deposit appears to have been concentrated after the peak of the Damara orogeny at around 530 Ma as indicated by radiometric age data.Volcanic hosted Cu–(Au) deposits (Neuwerk and Askevold) in the Askevold Formation may be related to ore forming processes during continental rifting around 746 Ma. The timing of carbonate-hosted Pb–Zn deposits in the Abenab Subgroup at Berg Aukas and Abenab is not well constrained, but the stable (S, O, C) and Pb isotope as well as the ore fluid characteristics are similar to the Tsumeb-type ores. Regional scale ore fluid migration typical of MVT deposits is indicated by the presence of Pb–Zn occurrences over 2500 km² within stratabound breccias of the Elandshoek Formation. Mulden Group siliciclastic rocks host the relatively young stratiform Cu–(Ag) Tschudi resource, which is comparable to Copperbelt-type sulfide ores.     

Evaluation of the uncertainty in estimation of metal resources of skarn tin in Southern China

This study is concerned with the problem of how many undiscovered mineral deposits can be expected to occur in the vicinity of any known deposit, especially if the deposit is nearly mined out. Skarn tin deposits in southern China were chosen to demonstrate that fractal modeling can be a useful tool to characterize the spatial–temporal distribution of mineral deposits, and to quantify their grades and tonnages. The results show that the spatial–temporal distribution of skarn tin deposits as well as their grades and tonnages satisfy fractal statistic, and suggest that 14 skarn tin deposits could be found around a known skarn tin deposit within a radius of 80 km. Monte Carlo simulation was used to combine the number of deposits and the frequency distributions of grade and tonnage and to capture the uncertainty in estimation of metal resources. At the 90%, 50% and 10% confidence levels, tin metal resources amount to 6 ton, 200 ton, and 1.0 × 10⁴ ton around a known tin deposit within a radius of 80, respectively.     

Origin and evolution of the calcic and magnesian skarns hosting the El Valle-Boinás copper–gold deposit, Asturias (Spain)

The El Valle-Boinás copper–gold deposit is located in the southern part of the Rio Narcea Gold Belt 65 km west of Oviedo (NW Spain), within the Cantabrian Zone (Iberian Hercynian Massif). The deposit is related to the Boinás stock, which ranges from quartz-monzonite to monzogranite and intruded (303 Ma) the carbonated Láncara Formation (early Cambrian) and the siliciclastic Oville Formation (middle-late Cambrian).A copper–gold skarn was developed along the contact between the igneous rock and the carbonated sedimentary rocks. The skarn distribution and mineralogy reflects both structural and lithologic controls. Two types of skarn exists: a calcic skarn mainly developed in the upper calcic member of the Láncara Formation, and a magnesian skarn developed in the lower dolomitic and organic-rich member. The former mainly consists of garnet, pyroxene and wollastonite. Retrograde alteration consists of K-feldspar, epidote, quartz, calcite, magnetite, ferroactinolite, titanite, apatite, chlorite and sulfides. Magnesian skarn mainly consists of diopside with interbedded forsterite zones. Pyroxene skarn is mainly altered to tremolite, with minor phlogopite and serpentine. Olivine skarn is pervasively altered to serpentine and magnetite, and is commonly accompanied by high sulfide and gold concentrations. This altered skarn results in a very dark rock, referred to as “black skarn”, which has great importance in gold reserves. Sulfide mineralization mainly consists of chalcopyrite, bornite, arsenopyrite, pyrrhotite and pyrite, while wittichenite, sphalerite, digenite, bismuthinite, native bismuth and electrum occur as accessory minerals.After extensive erosion, reactivation of the northeast-trending fracture zone provided conduits for the subsequent emplacement of porphyritic dikes (285±4 Ma) and diabasic dikes (255±5 Ma). Alteration, characterized by sericitization, silicification, carbonatization and hypogene oxidation took place, as did sulfide mineralization (pyrite, arsenopyrite, sphalerite, chalcopyrite, galena, bournonite, and Fe–Pb–Sb sulfosalts). Veins with quartz, carbonate, adularia and sulfide minerals crosscut all previous lithologies. Jasper and jasperoid breccias developed at the upper parts of the deposits.The fluid inclusion and stable isotope studies suggest a predominantly magmatic prograde-skarn fluid characterized by high-salinity (26–28 wt.% KCl and 32–36 wt.% NaCl) and high temperature, above 580°C. This fluid evolved into two immiscible fluids: a CO₂- and/or CH₄-rich, high-salinity aqueous fluid. Temperatures for the first retrograde-stage are between 350 and 425°C. A second stage is related to a more diluted aqueous fluid (3–6.2 wt.% NaCl eq.) and temperatures from 280 to 325°C. The fluid inclusion study performed on quartz from low-temperature mineralization indicates a very low salinity (0.2–6.2 wt.% NaCl eq.), low-temperature aqueous fluid (from 150 to 250°C), and trapping pressure conditions less than 0.2 kbar. In addition, the stable isotope study suggests that an influx of metamorphic waters derived from the country rocks produced these lower temperature fluids. The last control for the Au mineralization is the Alpine tectonism, which developed fault breccias (cataclasites to, locally, protomylonites) and gold remobilization from previous mineralization.     

Geologic, fluid inclusion and isotopic characteristics of the Jinding Zn–Pb deposit, western Yunnan, South China: A review

With a reserve of  200 Mt ore grading 6.08% Zn and 1.29% Pb (i.e., a metal reserve of  15 Mt) hosted in Cretaceous and Tertiary terrestrial rocks, the Jinding deposit is the largest Zn–Pb deposit in China, and also the youngest sediment-hosted super giant Zn–Pb deposit in the world. The deposit mainly occurs in the Jinding dome structure as tabular orebodies within breccia-bearing sandstones of the Palaeocene Yunlong Formation (autochthonous) and in the overlying sandstones of the Early Cretaceous Jingxing Formation (allochthonous). The deposit is not stratiform and no exhalative sedimentary rocks have been observed. The occurrence of the orebodies, presence of hangingwall alteration, and replacement and open-space filling textures all indicate an epigenetic origin. Formation of the Jinding Zn–Pb deposit is related to a period of major continental crust movement during the collision of the Indian and Eurasian Plates. The westward thrusts and dome structure were successively developed in the Palaeocene sedimentary rocks in the ore district, and Zn–Pb mineralisation appears to have taken place in the early stage of the doming processes.The study of fluid inclusions in sphalerite and associated gangue minerals (quartz, celestine, calcite and gypsum) shows that homogenisation temperatures ranged from 54 to 309 °C and cluster around 110 to 150 °C, with salinities of 1.6 to 18.0 wt.% NaCl equiv. Inert gas isotope studies from inclusions in ore- and gangue-minerals reveal 2.0 to 15.6% mantle He, 53% mantle Ne and a considerable amount of mantle Xe in the ore-forming fluids. The Pb-isotope composition of ores shows that the metal is mainly of mantle origin, mixed with a lesser amount of crustal lead. The widely variable and negative δ³⁴S values of Jinding sulphides suggest that thermo-chemical or bacterial sulphate reduction produced reduced sulphur for deposition of the Zn–Pb sulphides. The mixing of a mantle-sourced fluid enriched in metals and CO₂ with reduced sulphide-bearing saline formation water in a structural–lithologic trap may have been the key mechanism for the formation of the Jinding deposit.The Jinding deposit differs from known major types of sediment-hosted Zn–Pb deposits in the world, including sandstone-type (SST), Mississippi Valley type (MVT) and sedimentary-exhalative (SEDEX). Although the fine-grained ore texture and high Zn/Pb ratios are similar to those in SEDEX deposits, the Jinding deposit lacks any exhalative sedimentary rocks. Like MVT deposits, Jinding is characterised by simple mineralogy, epigenetic features and involvement of basinal brines in mineralisation, but its host rocks are mainly sandstones and breccia-bearing sandstones. The Jinding deposit is also different from SST deposits with its high Zn/Pb ratios, among other characteristics. Most importantly, the Jinding deposit was formed in an intracontinental terrestrial basin with an active tectonic history in relation to plate collision, and mantle-sourced fluids and metals played a major role in ore formation, which is not the case for SEDEX, MVT, and SST. We propose that Jinding represents a new type of sediment-hosted Zn–Pb deposit, named the ‘Jinding type’.     

四川马边地区找矿新发现：磷—铅—萤石矿三位一体找矿新模型

近年,在实施马边地区永红磷矿勘探项目过程中,新发现了铅矿和萤石矿,从此建立了马边地区磷—铅—萤石矿三位一体找矿新模型,促进了马边地区从以往的单一矿种（磷矿）勘查开发历史转型升级为目前的多矿种多空间（磷—铅—萤石矿）勘查开发现状。四川恰好属于缺乏萤石矿和无萤石成矿区带的地区（王吉平等,2010）,在川西南峨边—金阳大断裂带上的马边地区发现萤石矿床,萤石在战略性新兴产业中有重要应用,未来需求将呈快速增长趋势（陈军元等,2021）,无疑对乌蒙山马边地区的扶贫攻坚和经济发展具有实际意义,对川西南峨边—金阳大断裂带的区域找矿工作具有重要的指导意义。     

Initial geometry and paleoflow reconstruction of the Yamansu skarn-related iron deposit of eastern Tianshan(China): from paleomagnetic and magnetic fabrics investigations

<正>This study aims to uses paleomagnetic and anisotropy of magnetic susceptibility(AMS)methods to recognize the initial deposit position and to track the paleoflow at the origin of an iron skarn-related deposit.The Yamansu deposit is located in eastern Tianshan(Charvet,2007).This province has a substantial mining potential for Fe–(Cu)skarn,Cu–Ni and V–Ti orthomagmatic deposits,and orogenic Au lodes(Branquet et al.,2012;Zhang et a.,2005;Mao et al.,2005).Recent publication dates the Yamansu deposit at 323 Ma,and uses this deposit to define a model of Submarine Volcanogenic Iron Oxide(SVIO)deposits(Hou et al.,     

Sulfide mineralogy in the polymetallic cassiterite deposits of Dachang,P.R. China

Several important mineral deposits of Sn, Zn, Cu, Pb, and other metals associated with Devonian sediments and Yanshanian (Cretaceous) granitic rocks are known in the Dachang district (Guangxi). Early genetic hypotheses related the origin of the deposits entirely to the Yanshanian granites. Recently, it was suggested that in Devonian times an earlier syngenetic metal concentration may have occurred, later overprinted by the Yanshanian metallogeny. This contribution is aimed at placing constraints on the physicochemical conditions during the Yanshanian ore formation-remobilization by studying the sulfide chemistry (arsenopyrite, sphalerite, stannite) and fluid inclusion data on the two major deposits in the area, i.e., the polymetallic cassiterite deposit of Changpo and the Zn-Cu skarn deposit of Lamo. Sphalerite and arsenopyrite are quite abundant in both deposits; stannite is minor, but fairly widespread at Changpo, and quite rare at Lamo. They are accompanied by pyrite, pyrrhotite, galena, chalcopyrite, cassiterite, fluorite, and a large variety of other sulfides and sulfosalts. The main compositional data for sphalerite and arsenopyrite are summarized as follows:Changpo: arsenopyrite associated with pyrrhotite 31.4–36.1 at% As; Associated with pyrite 31.9–33.1 at% As; sphalerite associated with pyrrhotite 18.3–22.2 mol% FeS; associated with pyrite 10.6–18.6 mol% FeS.Lamo: arsenopyrite associated with pyrrhotite 32.9–35.3 at% As; associated with pyrite 30.3–31.7 at% As; sphalerite associated with pyrrhotite, 17.2–24.4 mol% FeS; associated with pyrite 4.2–19.6 mol% FeS.Partitioning of Fe and Zn between coexisting sphalerite and stannite from Changpo indicates temperatures of 300°–350°C. For Lamo, the following fluid inclusion data are available: fluorite, salinities of 0–9.5 equiv. wt% NaCl, and homogenization temperatures between 160°C and 250°C; quartz, moderate salinities (0–4.6 equiv. wt% NaCl), and homogenization temperatures of 208°–260°C. Combining the mineralogical evidence with the compositional and fluid inclusion data, it is suggested that the evolution of the environment during the Yanshanian event was characterized by the following parameters: pressure was relatively low (on the order of 1–1.5 kb); temperature may have been as high as 500°C during deposition of the As-richest arsenopyrites, but eventually dropped below 200°–250°C in the latest stages; with an increase in sulfur activity and/or the decrease in temperature pyrrhotite was no longer stable in the latest stages of mineralization.     

拉拉IOCG矿床萤石的微量元素地球化学特征及其指示意义

康滇地区元古宙拉拉IOCG矿床中有与铜、钼矿化密切相关的萤石产出,其中,变质期有萤石(I)和萤石(II)2个世代萤石产出,前者与鳞片状辉钼矿共生,后者与条带状辉钼矿共生;热液期萤石(III)呈脉状穿插含变质期萤石的矿石;萤石的微量元素记录了成矿流体来源方面的重要信息。通过ICP-MS方法分析矿床中2期萤石样品的微量元素组成,运用微量元素含量、比值及蛛网图探讨微量元素特征、成矿流体来源及性质。结果表明:变质期萤石中各微量元素含量有一定的变化范围,热液期中各微量元素含量比较稳定,元素在萤石中的含量主要由元素在原始流体中的含量及元素本身性质所决定。结论认为:1变质期萤石(I)和萤石(II)为同源流体不同阶段演化产物,成矿流体来自于围岩,为具有高F-,Cu,Mo和Y含量的低p H值海水相流体,活动范围有限,没有发生大规模流动或迁移;2热液期萤石(III)与变质期萤石不同源,成矿流体由大气降水或地下水渗透淋滤围岩形成,为具有低F-含量的高p H值大陆淡水相流体,可能发生较远距离的渗入性流体流动或迁移。     

Porphyry Cu–Au and associated polymetallic Fe–Cu–Au deposits in the Beiya Area, western Yunnan Province, south China

The Alkaline porphyries in the Beiya area are located east of the Jinshajiang suture, as part of a Cenozoic alkali-rich porphyry belt in western Yunnan. The main rock types include quartz-albite porphyry, quartz-K-feldspar porphyry and biotite–K-feldspar porphyry. These porphyries are characterised by high alkalinity [(K₂O + Na₂O)% > 10%], high silica (SiO₂% > 65%), high Sr (> 400 ppm) and ⁸⁷Sr/⁸⁶Sr (> 0.706)] ratio and were intruded at 65.5 Ma, between 25.5 to 32.5 Ma, and about 3.8 Ma, respectively. There are five main types of mineral deposits in the Beiya area: (1) porphyry Cu–Au deposits, (2) magmatic Fe–Au deposits, (3) sedimentary polymetallic deposits, (4) polymetallic skarn deposits, and (5) palaeoplacers associated with karsts. The porphyry Cu–Au and polymetallic skarn deposits are associated with quartz–albite porphyry bodies. The Fe–Au and polymetallic sedimentary deposits are part of an ore-forming system that produced considerable Au in the Beiya area, and are characterised by low concentrations of La, Ti, and Co, and high concentrations of Y, Yb, and Sc.The Cenozoic porphyries in western Yunnan display increased alkalinity away from the Triassic Jinshajiang suture. Distribution of both the porphyries and sedimentary deposits in the Beiya area are interpreted to be related to partial melting in a disjointed region between upper mantle lithosphere of the Yangtze Plate and Gondwana continent, and lie within a shear zone between buried Palaeo-Tethyan oceanic lithosphere and upper mantle lithosphere, caused by the subduction and collision of India and Asia.     

The Lower Changjiang (Yangzi/Yangtze River) metallogenic belt, east central China: intrusion- and wall rock-hosted Cu–Fe–Au, Mo, Zn, Pb, Ag deposits

The lower valley of Changjiang, from Wuhan of the Hubei Province in the west to Zhenjiang of the Jiangsu Province in the east, contains more than 200 polymetallic (Cu–Fe–Au, Mo, Zn, Pb, Ag) deposits and is one of the most important metallogenic belts in China. This metallogenic belt, situated at the northern margin of the Yangzi craton and bordered by the Dabieshan ultrahigh pressure metamorphic belt to the north, consists mainly of Cambrian–Triassic marine clastic sedimentary rocks and carbonate and evaporite rocks, which overlay a Precambrian basement and are intruded by Yanshanian (205 to 64 Ma) granitoid intrusions and subvolcanic complexes. Repeated tectonism from Late Proterozoic to Triassic resulted in extensively developed networks of faults and folds involving the Cambrian–Triassic sedimentary strata and the Precambrian basement. The Yanshanian granitoid intrusions and subvolcanic complexes in the Lower Changjiang metallogenic belt are characterized by whole-rock δ¹⁸O of +8‰ to +10‰, initial ⁸⁷Sr/⁸⁶Sr of 0.704 to 0.708, and εNd^t from −10 to −17 and have been interpreted to have originated from mixing between juvenile mantle and old crustal materials. Also, the Yanshanian granitoids exhibit eastward younging and increase in alkalinity (i.e., from older calc–alkaline in the west to younger subalkaline–alkaline in the east), which are related to oblique collision between the Yangzi and Sino-Korean cratons and tectonic evolution from early compressional to late extensional or rifting regimes. Most polymetallic deposits in the Lower Changjiang metallogenic belt are clustered in seven districts where the Yanshanian magmatism is particularly extensive: from west to east, Edong, Jiurui, Anqing–Guichi, Luzhong, Tongling, Ningwu and Ningzhen. Mineralization is characterized by the occurrence of three distinct types of orebodies in individual deposits: orebodies in Yanshanian granitoid intrusions, skarn orebodies at the contact zones between the Yanshanian intrusions and Late Paleozoic–Early Mesozoic sedimentary rocks, and stratabound massive sulfide orebodies in the Late Paleozoic–Early Mesozoic sedimentary strata. The most important host sedimentary strata are the Middle Carboniferous Huanglong Formation, Lower Permian and Lower–Middle Triassic carbonate and evaporite rocks. The intrusion-hosted and skarn orebodies exhibit well-developed zonation in alteration assemblages, metal contents, and isotopic compositions within individual deposits, and apparently formed from hydrothermal activities related to the Yanshanian magmatism. The stratabound massive sulfide orebodies in the Late Paleozoic–Early Mesozoic sedimentary strata have long been suggested to have formed from sedimentary or volcano-sedimentary exhalative processes in shallow marine environments. However, extensive research over the last 40 years failed to produce unequivocal evidence for syngenetic mineralization. On the basis of geological relationships and isotope geochemical characteristics, we propose a carbonate-hosted replacement deposit model for the genesis of these stratabound massive sulfide orebodies and associated skarn orebodies. This model suggests that epigenetic mineralization resulted from interactions between magmatic fluids evolved from the Yanshanian intrusions with carbonate and evaporite wall rocks. Mineralization was an integral but distal part of the larger hydrothermal systems that formed the proximal skarn orebodies at the contact zones and the intrusion-hosted orebodies. The stratabound massive sulfide deposits of the Lower Changjiang metallogenic belt share many features with the well-studied, high-temperature, carbonate-hosted replacement deposits of northern Mexico and western United States, particularly with respect to association with small, shallow granitoid complexes, structural and stratigraphic controls on mineralization, alteration assemblages, geometry of orebodies, metal association, metal zonation and isotopic systematics.     

The role of “excess” CO2 in the formation of trona deposits

The prevailing theory for the formation of trona [Na₃(CO₃)(HCO₃) · 2(H₂O)] relies on evaporative concentration of water produced by silicate hydrolysis of volcanic rock or volcaniclastic sediments. Given the abundance of closed drainage basins dominated by volcanics, it is puzzling that there are so few trona deposits and present-day lakes that would yield dominantly Na–CO₃ minerals upon evaporation. Groundwater in the San Bernardino Basin (southeastern Arizona, USA and northeastern Sonora, Mexico) would yield mainly Na–CO₃ minerals upon evaporation, but waters in the surrounding basins would not. Analysis of the chemical evolution of this groundwater shows that the critical difference from the surrounding basins is not lithology, but the injection of magmatic CO₂. Many major deposits of trona and Na–CO₃-type lakes appear to have had “excess” CO₂ input, either from magmatic sources or from the decay of organic matter. It is proposed that, along with the presence of volcanics, addition of “excess” CO₂ is an important pre-condition for the formation of trona deposits.     

Isotopic composition of strontium in the Valle de Tena (Spanish Central Pyrenees) fluorite deposits: relevance for the source of elements and genetic significance

The fluorite deposits of the Valle de Tena, Central Pyrenees, include stratabound (Portalet) and vein (Lanuza and Tebarray) deposits the formation of which are linked to a Namurian-Westfalian emersion episode and to post-Hercynian hydrothermal systems similar to those occurring elsewhere in Hercynian Europe. In this study, strontium isotopes were used to determine the source(s) of strontium, and by inference calcium, of the fluorite mineralizations, as well as the nature of the ore-forming fluids. Fluorite and calcite from each deposit have similar ⁸⁷Sr/⁸⁶Sr ratios (Portalet 0.7085–0.7108; Lanuza 0.7086–0.7104 and Tebarray 0.7086–0.7101). In all deposits, the Sr isotope composition of most of the Ca-minerals is more radiogenic than that of the host limestones. This indicates that the Ca-minerals contain a mixture of Sr derived locally from the host limestones and ⁸⁷ Sr-enriched Sr leached from silicate minerals in the siliciclastic portion of the basement sequence and in granites from the study area. Volcanic rocks are ruled out as a significant Sr source for the fluorite deposits. The observed trend in ⁸⁷Sr/⁸⁶Sr versus 1/Sr support a fluid-rock interaction model which satisfactorily reproduces the marked ⁸⁷Sr-enrichment in the fluorites and calcites from the deposits. Received: 19 February 1997 / Accepted: 22 July 1997