且干布拉克早寒武世硅质岩岩石学、地球化学特征及地质意义

通过对西山布拉克组第一岩性段硅质岩岩石学、地球化学特征研究,探讨其沉积环境和成因,推测其与库鲁克塔格早古生代地壳演化关系。研究区硅质岩夹泥质硅岩、流纹质晶屑凝灰岩的岩石组合,硅质岩的Al/(Al+Fe)值(~0.6)、Ce/Ce*值(~0.57)、(La/Yb)n值(~0.66)等特征指示为欠补偿、缺氧的深水盆地沉积环境。其Fe/Ti值(~29.2),Al/(Al+Fe+Mn)值(~0.54),(Fe+Mn)/Ti值(~31.3),富集Ag,As,Sb,Ba元素等特征,表明该区硅质岩为热水和海水混合成因,形成过程中海水有较高的生产力。硅质岩∑REE在剖面底部为14.9×10-6,向上减小为8.6×10-6,至顶部增加到105.6×10-6,表明剖面底部到顶部热水活动强度呈减弱趋势。早寒武世硅质岩岩石学、地球化学特征表明,硅质岩形成于裂陷槽盆地中,是上升洋流将海底热水物质带至沉积地点与海水发生不同程度混合的产物,为库鲁克塔格早寒武世早期处于拉张裂解环境提供了岩石学和地球化学证据。     

塔里木克拉通库鲁克塔格下寒武统底界年龄:锆石LA-ICP-MS U-Pb定年

制约塔里木克拉通下寒武统的精确锆石U-Pb年龄稀少,最近笔者于库鲁克塔格北区下寒武统西山布拉克组底部硅质岩中发现一层10～20 cm厚的凝灰岩夹层,对其锆石斑晶进行LA-ICP-MS U-Pb测年,结果显示该凝灰岩的就位年龄为520.3±2.9 Ma(MSWD=0.11).首次获得塔里木克拉通下寒武统精确锆石U-Pb年龄数据,构建了该区下寒武统以精确锆石U-Pb年龄为基础的时间框架雏形.参考华南下寒武统黑色岩系沉积速率,库鲁克塔格北区且干布拉克达坂剖面下寒武统西山布拉克组可能于532.1±2.9 Ma开始沉积;结合区域地层对比,受西大山运动影响库鲁克塔格北区埃迪卡拉系—寒武系可能存在约50 Ma的沉积间断.     

贵州镇宁重晶石矿中硅质岩稀土元素地球化学研究

通过对镇宁泥盆系重晶石矿中硅质岩稀土元素地球化学特征研究,发现硅质岩稀土总量较低,轻稀土富集,δCe呈弱的负异常,δEu呈负异常到正异常,{La/Sm}N和{Gd/Yb}N值表明轻稀土分异强;通过∑REE、Ce/Ce＊、Eu/Eu＊、{La/Ce}N和{La/Lu}N参数综合分析,硅质岩沉积成岩过程中有明显的热水参与,...     

塔里木盆地肖尔布拉克剖面下寒武统底部硅质岩微量元素和稀土元素地球化学及其沉积背景

对塔里木盆地北部肖尔布拉克寒武系露头剖面中 8.8m厚的黑色页岩夹硅质岩组合中的硅质岩的系统采样分析表明,该硅质岩具有深源成因特征。其低的Th/U和Rb/Sr比也证明了其沉积时所具有的深部物源和热水注入迹象。硅质岩的稀土元素经北美页岩标准化后的Ce/Ce 从 0.4 2到 0.79,平均 0.5 7。Ce的负异常明显。这些稀土元素的参数特征与加利福尼亚弗朗希斯科杂岩 (FranciscanComplex)中沉积在大洋海底硅质岩的稀土元素特征十分相似。北美页岩标准化后的Eu/Eu 值从 8.0 5下降到 1.0 3。其相对较高的Eu/Eu 值很有可能反映了热水的注入。Eu/Eu 值从剖面底部到顶部的系统降低反映了剖面底部的热水作用最强烈,向上热水作用逐渐减弱。上述一系列的地球化学标志指示该硅质岩应沉积在离洋中脊不远的、具有深源物质/热水注入的远洋盆地背景中。结合区域地质和伴生黑色页岩地球化学的综合分析认为,该套硅质岩的形成与上升洋流的影响有关。上升洋流将形成于大洋盆地背景中的物质带到大陆边缘陆棚环境中发生沉积,造成了沉积在陆棚环境中的硅质岩,在地球化学组成上保留了其大洋盆地背景的特征     

库鲁克塔格西山布拉克组炭质页岩中发现以单矿物形式存在的金、银矿化

炭质建造中含有许多具有工业意义的矿床.新疆区内下寒武统含磷炭质建造中亦已发现铀钒矿化.笔者等于1985年5月在西库鲁克塔格为查明炭质建造中金、银的远景,采集了震旦系汉格尔乔克组,下寒武统西山布拉克组和西大山组部分岩石样品,通过光谱和原     

滇东北会泽灯影组硅质岩成因及沉积环境——来自岩石学和地球化学证据

通过1：50 000区域地质调查,发现云南省会泽县一带灯影组中普遍发育硅质岩。本文通过硅质岩岩石学特征和地球化学特征分析,重点探讨了灯影组各段硅质岩的成因机制和沉积环境。结果表明：震旦系-寒武系灯影组下段硅质岩中相对富集Al和Ti,总稀土（ΣREE）相对较高,Ce呈负异常,Eu呈正异常;中段硅质岩中相对富集Ca和Mg,总稀土较低,LREE>HREE,Ce呈负异常,Eu呈正异常;上段硅质岩总稀土较低,LREE>HREE,Ce大部分呈负异常,Eu呈正负异常。综合硅质岩岩石学、地球化学特征,并结合震旦纪区域地质构造演化,认为研究区内下段硅质岩表现为正常海水沉积、中段硅质岩表现为典型热水沉积、上段表现出正常海水沉积受热水沉积影响的特征。硅质岩形成于复杂大陆边缘的浅海陆棚环境。     

贵州遵义二叠系锰矿区硅质岩成因及成矿意义

贵州遵义二叠系锰矿底部发育一套特殊的硅质岩建造,该套硅质岩环绕锰矿富集区呈墙状产出,习称“白泥塘层”硅质岩或“城墙式”硅质岩,其与锰矿成矿作用之间有着紧密的成因联系。详细地野外地质调查发现,该套硅质岩具有条带状、角砾状和块状构造,其中钢灰色、黑色锰质细脉穿插于条带硅质岩之中,角砾状构造硅质岩多沿锰矿体周边分布。10 件硅质岩样品元素地球化学分析表明 ,硅质岩具有较高的 SiO₂（80.55% ～99.56%）和Fe₂O₃（0.47%～13.76 %）, 较低的Al₂O₃（0.05%～4.06%）和TiO₂（0～0.49%）, 指示其形成过程中陆源碎屑物质参与较少。（La/Ce）比值和Ce 异常值特征指示硅质岩形成于深水裂陷盆地中,环N 境条件为还原状态。Fe-Mn-Al 和SiO₂-Al₂O₃ 图解显示, 硅质岩主要落入热水沉积区内或其附近区域。硅质岩Al/（Al+Fe+Mn）均值为0.26、（La/Ce）_N 值为1.51～2.34、 Y/Ho 值为 30.64～43.91,Eu/Eu^* 值为0.96～1.67,且硅质岩稀土配分模式与热水沉积硅质岩类似,这些特征集中表明硅质岩成岩过程中有明显的热水物质参与,属于热水成因硅质岩,这为遵义二叠系锰矿床热水喷流沉积成因提供了新的佐证。     

广西钦州石夹剖面硅质岩稀土元素地球化学特征

为探讨广西钦州石夹剖面晚泥盆世—早石炭世硅质岩成因及其沉积背景,应用X荧光光谱、等离子质谱等分析方法对硅质岩稀土元素地球化学特征进行了研究。结果显示,研究区晚泥盆世—早石炭世硅质岩ΣREE平均为94.81×10-6,ΣCe/ΣY为3.66~9.28(平均5.99),δCe为1.02~1.37(平均1.18),δEu为0.89~1.30(平均1.04),(La/Yb)N为1.38~3.20(平均2.02),(La/Ce)N为0.74~1.14(平均0.87),表明稀土元素组成与北美页岩相似,而明显有别于开阔洋盆和洋中脊的硅质岩,为古大陆边缘盆地(陆内海槽)硅质岩;在泥盆纪-石炭纪界线处δCe、(La/Yb)N降低,(La/Ce)N升高,结合(La/Ce)N对Al2O3/(Al2O3+Fe203)判别图以及硅铝铁成分比值成因判别图,推测此时沉积盆地短暂受到热液活动的影响。     

扬子地台北缘中上二叠统层状硅质岩的地球化学特征及其对古地理、古海洋演化的响应

为探讨华南地区二叠纪硅质岩的硅质来源和形成背景,本文以扬子地台北缘中上二叠统孤峰组和大隆组层状硅质岩为研究对象,对采自孤峰组和大隆组层状硅质岩样品进行了主量元素、微量元素和稀土元素分析测试,同时收集了大量前人有关孤峰组和大隆组的资料。上述研究结果表明,孤峰组和大隆组层状硅质岩的Al/(Al+Fe+Mn)、Si/(Si+Al+Fe)平均值分别为0.57、0.91和0.48、0.97,结合Al-Fe-Mn三角图解,指示它们主要为生物成因;其Ce/Ce*、(La/Ce)N和(La/Yb)N平均值分别为0.86、1.58、1.27和0.75、1.52、1.46,结合沉积环境判别图,表明其沉积环境均主要为大陆边缘,推测硅质岩的形成可能与上升流的活动有关。部分地区存在热水成因硅质岩和/或受热水影响硅质岩并往往沿同沉积断裂分布,暗示同沉积断裂可能为热水活动提供通道。     

华北陆块南部古元古代熊耳群硅质岩地球化学特征及其沉积环境

华北陆块南部古元古代熊耳群中的硅质岩主要发育于马家河组沉积岩中,有少量与火山岩共生。通过分析硅质岩的主、微量元素特征,把熊耳群硅质岩分为热水成因和非热水成因两类。热水成因硅质岩表现为低TiO2、MgO、Al2O3和∑REE含量,以及低的A1/(A1+Fe+Mn) 比值的特征;其北美页岩标准化的稀土分配模式平坦,但具有Ce负异常与Eu正异常,U/Th>1,反映沉积速率快,受陆源物质的影响小。非热水成因的硅质岩的∑REE含量高,轻稀土富集(LaN/YbN=1.41~9.04),U/Th<1,受陆源物质影响较大。熊耳群硅质岩的Cr/Th比值变化小,表明物源区成分比较单一;其与熊耳群火山岩具有相似的REE配分模式图和蛛网图,也说明物源为熊耳群的英安—流纹质火山岩和玄武—安山质火山岩的混合。硅质岩的Al2O3/(Al2O3+Fe2O3)比值为0.44~0.64、以及Ce/Ce*(0.77~0.94)、LaN/CeN(1.18~1.47)的特征表明,熊耳群硅质岩主要形成于被动大陆边缘环境。熊耳群硅质岩主要形成于海相、海陆交互相等环境。早在古元古代熊耳群时期,熊耳—中条拗拉谷发生强烈的扩张裂解作用,华北陆块南部遭受海水入侵,豫南有些地区已经处于海相环境,晋南垣曲有些地区处于海陆交互相环境,局部地区还处于陆相环境。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。